diff options
Diffstat (limited to 'Documentation')
31 files changed, 269 insertions, 103 deletions
diff --git a/Documentation/ABI/testing/sysfs-class-net-queues b/Documentation/ABI/testing/sysfs-class-net-queues index 906ff3ca928a..5bff64d256c2 100644 --- a/Documentation/ABI/testing/sysfs-class-net-queues +++ b/Documentation/ABI/testing/sysfs-class-net-queues @@ -1,4 +1,4 @@ -What: /sys/class/<iface>/queues/rx-<queue>/rps_cpus +What: /sys/class/net/<iface>/queues/rx-<queue>/rps_cpus Date: March 2010 KernelVersion: 2.6.35 Contact: netdev@vger.kernel.org @@ -8,7 +8,7 @@ Description: network device queue. Possible values depend on the number of available CPU(s) in the system. -What: /sys/class/<iface>/queues/rx-<queue>/rps_flow_cnt +What: /sys/class/net/<iface>/queues/rx-<queue>/rps_flow_cnt Date: April 2010 KernelVersion: 2.6.35 Contact: netdev@vger.kernel.org @@ -16,7 +16,7 @@ Description: Number of Receive Packet Steering flows being currently processed by this particular network device receive queue. -What: /sys/class/<iface>/queues/tx-<queue>/tx_timeout +What: /sys/class/net/<iface>/queues/tx-<queue>/tx_timeout Date: November 2011 KernelVersion: 3.3 Contact: netdev@vger.kernel.org @@ -24,7 +24,7 @@ Description: Indicates the number of transmit timeout events seen by this network interface transmit queue. -What: /sys/class/<iface>/queues/tx-<queue>/tx_maxrate +What: /sys/class/net/<iface>/queues/tx-<queue>/tx_maxrate Date: March 2015 KernelVersion: 4.1 Contact: netdev@vger.kernel.org @@ -32,7 +32,7 @@ Description: A Mbps max-rate set for the queue, a value of zero means disabled, default is disabled. -What: /sys/class/<iface>/queues/tx-<queue>/xps_cpus +What: /sys/class/net/<iface>/queues/tx-<queue>/xps_cpus Date: November 2010 KernelVersion: 2.6.38 Contact: netdev@vger.kernel.org @@ -42,7 +42,7 @@ Description: network device transmit queue. Possible values depend on the number of available CPU(s) in the system. -What: /sys/class/<iface>/queues/tx-<queue>/xps_rxqs +What: /sys/class/net/<iface>/queues/tx-<queue>/xps_rxqs Date: June 2018 KernelVersion: 4.18.0 Contact: netdev@vger.kernel.org @@ -53,7 +53,7 @@ Description: number of available receive queue(s) in the network device. Default is disabled. -What: /sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/hold_time +What: /sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/hold_time Date: November 2011 KernelVersion: 3.3 Contact: netdev@vger.kernel.org @@ -62,7 +62,7 @@ Description: of this particular network device transmit queue. Default value is 1000. -What: /sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/inflight +What: /sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/inflight Date: November 2011 KernelVersion: 3.3 Contact: netdev@vger.kernel.org @@ -70,7 +70,7 @@ Description: Indicates the number of bytes (objects) in flight on this network device transmit queue. -What: /sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/limit +What: /sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/limit Date: November 2011 KernelVersion: 3.3 Contact: netdev@vger.kernel.org @@ -79,7 +79,7 @@ Description: on this network device transmit queue. This value is clamped to be within the bounds defined by limit_max and limit_min. -What: /sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/limit_max +What: /sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/limit_max Date: November 2011 KernelVersion: 3.3 Contact: netdev@vger.kernel.org @@ -88,7 +88,7 @@ Description: queued on this network device transmit queue. See include/linux/dynamic_queue_limits.h for the default value. -What: /sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/limit_min +What: /sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/limit_min Date: November 2011 KernelVersion: 3.3 Contact: netdev@vger.kernel.org diff --git a/Documentation/ABI/testing/sysfs-class-net-statistics b/Documentation/ABI/testing/sysfs-class-net-statistics index 55db27815361..53e508c6936a 100644 --- a/Documentation/ABI/testing/sysfs-class-net-statistics +++ b/Documentation/ABI/testing/sysfs-class-net-statistics @@ -1,4 +1,4 @@ -What: /sys/class/<iface>/statistics/collisions +What: /sys/class/net/<iface>/statistics/collisions Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org @@ -6,7 +6,7 @@ Description: Indicates the number of collisions seen by this network device. This value might not be relevant with all MAC layers. -What: /sys/class/<iface>/statistics/multicast +What: /sys/class/net/<iface>/statistics/multicast Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org @@ -14,7 +14,7 @@ Description: Indicates the number of multicast packets received by this network device. -What: /sys/class/<iface>/statistics/rx_bytes +What: /sys/class/net/<iface>/statistics/rx_bytes Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org @@ -23,7 +23,7 @@ Description: See the network driver for the exact meaning of when this value is incremented. -What: /sys/class/<iface>/statistics/rx_compressed +What: /sys/class/net/<iface>/statistics/rx_compressed Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org @@ -32,7 +32,7 @@ Description: network device. This value might only be relevant for interfaces that support packet compression (e.g: PPP). -What: /sys/class/<iface>/statistics/rx_crc_errors +What: /sys/class/net/<iface>/statistics/rx_crc_errors Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org @@ -41,7 +41,7 @@ Description: by this network device. Note that the specific meaning might depend on the MAC layer used by the interface. -What: /sys/class/<iface>/statistics/rx_dropped +What: /sys/class/net/<iface>/statistics/rx_dropped Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org @@ -51,7 +51,7 @@ Description: packet processing. See the network driver for the exact meaning of this value. -What: /sys/class/<iface>/statistics/rx_errors +What: /sys/class/net/<iface>/statistics/rx_errors Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org @@ -59,7 +59,7 @@ Description: Indicates the number of receive errors on this network device. See the network driver for the exact meaning of this value. -What: /sys/class/<iface>/statistics/rx_fifo_errors +What: /sys/class/net/<iface>/statistics/rx_fifo_errors Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org @@ -68,7 +68,7 @@ Description: network device. See the network driver for the exact meaning of this value. -What: /sys/class/<iface>/statistics/rx_frame_errors +What: /sys/class/net/<iface>/statistics/rx_frame_errors Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org @@ -78,7 +78,7 @@ Description: on the MAC layer protocol used. See the network driver for the exact meaning of this value. -What: /sys/class/<iface>/statistics/rx_length_errors +What: /sys/class/net/<iface>/statistics/rx_length_errors Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org @@ -87,7 +87,7 @@ Description: error, oversized or undersized. See the network driver for the exact meaning of this value. -What: /sys/class/<iface>/statistics/rx_missed_errors +What: /sys/class/net/<iface>/statistics/rx_missed_errors Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org @@ -96,7 +96,7 @@ Description: due to lack of capacity in the receive side. See the network driver for the exact meaning of this value. -What: /sys/class/<iface>/statistics/rx_nohandler +What: /sys/class/net/<iface>/statistics/rx_nohandler Date: February 2016 KernelVersion: 4.6 Contact: netdev@vger.kernel.org @@ -104,7 +104,7 @@ Description: Indicates the number of received packets that were dropped on an inactive device by the network core. -What: /sys/class/<iface>/statistics/rx_over_errors +What: /sys/class/net/<iface>/statistics/rx_over_errors Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org @@ -114,7 +114,7 @@ Description: (e.g: larger than MTU). See the network driver for the exact meaning of this value. -What: /sys/class/<iface>/statistics/rx_packets +What: /sys/class/net/<iface>/statistics/rx_packets Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org @@ -122,7 +122,7 @@ Description: Indicates the total number of good packets received by this network device. -What: /sys/class/<iface>/statistics/tx_aborted_errors +What: /sys/class/net/<iface>/statistics/tx_aborted_errors Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org @@ -132,7 +132,7 @@ Description: a medium collision). See the network driver for the exact meaning of this value. -What: /sys/class/<iface>/statistics/tx_bytes +What: /sys/class/net/<iface>/statistics/tx_bytes Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org @@ -143,7 +143,7 @@ Description: transmitted packets or all packets that have been queued for transmission. -What: /sys/class/<iface>/statistics/tx_carrier_errors +What: /sys/class/net/<iface>/statistics/tx_carrier_errors Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org @@ -152,7 +152,7 @@ Description: because of carrier errors (e.g: physical link down). See the network driver for the exact meaning of this value. -What: /sys/class/<iface>/statistics/tx_compressed +What: /sys/class/net/<iface>/statistics/tx_compressed Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org @@ -161,7 +161,7 @@ Description: this might only be relevant for devices that support compression (e.g: PPP). -What: /sys/class/<iface>/statistics/tx_dropped +What: /sys/class/net/<iface>/statistics/tx_dropped Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org @@ -170,7 +170,7 @@ Description: See the driver for the exact reasons as to why the packets were dropped. -What: /sys/class/<iface>/statistics/tx_errors +What: /sys/class/net/<iface>/statistics/tx_errors Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org @@ -179,7 +179,7 @@ Description: a network device. See the driver for the exact reasons as to why the packets were dropped. -What: /sys/class/<iface>/statistics/tx_fifo_errors +What: /sys/class/net/<iface>/statistics/tx_fifo_errors Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org @@ -188,7 +188,7 @@ Description: FIFO error. See the driver for the exact reasons as to why the packets were dropped. -What: /sys/class/<iface>/statistics/tx_heartbeat_errors +What: /sys/class/net/<iface>/statistics/tx_heartbeat_errors Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org @@ -197,7 +197,7 @@ Description: reported as heartbeat errors. See the driver for the exact reasons as to why the packets were dropped. -What: /sys/class/<iface>/statistics/tx_packets +What: /sys/class/net/<iface>/statistics/tx_packets Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org @@ -206,7 +206,7 @@ Description: device. See the driver for whether this reports the number of all attempted or successful transmissions. -What: /sys/class/<iface>/statistics/tx_window_errors +What: /sys/class/net/<iface>/statistics/tx_window_errors Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org diff --git a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon index 8d7d8f05f6cd..92fe7c5c5ac1 100644 --- a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon +++ b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon @@ -1,4 +1,4 @@ -What: /sys/devices/.../hwmon/hwmon<i>/in0_input +What: /sys/bus/pci/drivers/i915/.../hwmon/hwmon<i>/in0_input Date: February 2023 KernelVersion: 6.2 Contact: intel-gfx@lists.freedesktop.org @@ -6,7 +6,7 @@ Description: RO. Current Voltage in millivolt. Only supported for particular Intel i915 graphics platforms. -What: /sys/devices/.../hwmon/hwmon<i>/power1_max +What: /sys/bus/pci/drivers/i915/.../hwmon/hwmon<i>/power1_max Date: February 2023 KernelVersion: 6.2 Contact: intel-gfx@lists.freedesktop.org @@ -20,7 +20,7 @@ Description: RW. Card reactive sustained (PL1/Tau) power limit in microwatts. Only supported for particular Intel i915 graphics platforms. -What: /sys/devices/.../hwmon/hwmon<i>/power1_rated_max +What: /sys/bus/pci/drivers/i915/.../hwmon/hwmon<i>/power1_rated_max Date: February 2023 KernelVersion: 6.2 Contact: intel-gfx@lists.freedesktop.org @@ -28,7 +28,7 @@ Description: RO. Card default power limit (default TDP setting). Only supported for particular Intel i915 graphics platforms. -What: /sys/devices/.../hwmon/hwmon<i>/power1_max_interval +What: /sys/bus/pci/drivers/i915/.../hwmon/hwmon<i>/power1_max_interval Date: February 2023 KernelVersion: 6.2 Contact: intel-gfx@lists.freedesktop.org @@ -37,7 +37,7 @@ Description: RW. Sustained power limit interval (Tau in PL1/Tau) in Only supported for particular Intel i915 graphics platforms. -What: /sys/devices/.../hwmon/hwmon<i>/power1_crit +What: /sys/bus/pci/drivers/i915/.../hwmon/hwmon<i>/power1_crit Date: February 2023 KernelVersion: 6.2 Contact: intel-gfx@lists.freedesktop.org @@ -50,7 +50,7 @@ Description: RW. Card reactive critical (I1) power limit in microwatts. Only supported for particular Intel i915 graphics platforms. -What: /sys/devices/.../hwmon/hwmon<i>/curr1_crit +What: /sys/bus/pci/drivers/i915/.../hwmon/hwmon<i>/curr1_crit Date: February 2023 KernelVersion: 6.2 Contact: intel-gfx@lists.freedesktop.org @@ -63,7 +63,7 @@ Description: RW. Card reactive critical (I1) power limit in milliamperes. Only supported for particular Intel i915 graphics platforms. -What: /sys/devices/.../hwmon/hwmon<i>/energy1_input +What: /sys/bus/pci/drivers/i915/.../hwmon/hwmon<i>/energy1_input Date: February 2023 KernelVersion: 6.2 Contact: intel-gfx@lists.freedesktop.org diff --git a/Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon b/Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon index 8c321bc9dc04..023fd82de3f7 100644 --- a/Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon +++ b/Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon @@ -1,4 +1,4 @@ -What: /sys/devices/.../hwmon/hwmon<i>/power1_max +What: /sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/power1_max Date: September 2023 KernelVersion: 6.5 Contact: intel-xe@lists.freedesktop.org @@ -12,7 +12,7 @@ Description: RW. Card reactive sustained (PL1) power limit in microwatts. Only supported for particular Intel xe graphics platforms. -What: /sys/devices/.../hwmon/hwmon<i>/power1_rated_max +What: /sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/power1_rated_max Date: September 2023 KernelVersion: 6.5 Contact: intel-xe@lists.freedesktop.org @@ -20,7 +20,7 @@ Description: RO. Card default power limit (default TDP setting). Only supported for particular Intel xe graphics platforms. -What: /sys/devices/.../hwmon/hwmon<i>/power1_crit +What: /sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/power1_crit Date: September 2023 KernelVersion: 6.5 Contact: intel-xe@lists.freedesktop.org @@ -33,7 +33,7 @@ Description: RW. Card reactive critical (I1) power limit in microwatts. Only supported for particular Intel xe graphics platforms. -What: /sys/devices/.../hwmon/hwmon<i>/curr1_crit +What: /sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/curr1_crit Date: September 2023 KernelVersion: 6.5 Contact: intel-xe@lists.freedesktop.org @@ -44,7 +44,7 @@ Description: RW. Card reactive critical (I1) power limit in milliamperes. the operating frequency if the power averaged over a window exceeds this limit. -What: /sys/devices/.../hwmon/hwmon<i>/in0_input +What: /sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/in0_input Date: September 2023 KernelVersion: 6.5 Contact: intel-xe@lists.freedesktop.org @@ -52,7 +52,7 @@ Description: RO. Current Voltage in millivolt. Only supported for particular Intel xe graphics platforms. -What: /sys/devices/.../hwmon/hwmon<i>/energy1_input +What: /sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/energy1_input Date: September 2023 KernelVersion: 6.5 Contact: intel-xe@lists.freedesktop.org @@ -60,7 +60,7 @@ Description: RO. Energy input of device in microjoules. Only supported for particular Intel xe graphics platforms. -What: /sys/devices/.../hwmon/hwmon<i>/power1_max_interval +What: /sys/bus/pci/drivers/xe/.../hwmon/hwmon<i>/power1_max_interval Date: October 2023 KernelVersion: 6.6 Contact: intel-xe@lists.freedesktop.org diff --git a/Documentation/ABI/testing/sysfs-nvmem-cells b/Documentation/ABI/testing/sysfs-nvmem-cells index 7af70adf3690..c7c9444f92a8 100644 --- a/Documentation/ABI/testing/sysfs-nvmem-cells +++ b/Documentation/ABI/testing/sysfs-nvmem-cells @@ -4,18 +4,18 @@ KernelVersion: 6.5 Contact: Miquel Raynal <miquel.raynal@bootlin.com> Description: The "cells" folder contains one file per cell exposed by the - NVMEM device. The name of the file is: <name>@<where>, with - <name> being the cell name and <where> its location in the NVMEM - device, in hexadecimal (without the '0x' prefix, to mimic device - tree node names). The length of the file is the size of the cell - (when known). The content of the file is the binary content of - the cell (may sometimes be ASCII, likely without trailing - character). + NVMEM device. The name of the file is: "<name>@<byte>,<bit>", + with <name> being the cell name and <where> its location in + the NVMEM device, in hexadecimal bytes and bits (without the + '0x' prefix, to mimic device tree node names). The length of + the file is the size of the cell (when known). The content of + the file is the binary content of the cell (may sometimes be + ASCII, likely without trailing character). Note: This file is only present if CONFIG_NVMEM_SYSFS is enabled. Example:: - hexdump -C /sys/bus/nvmem/devices/1-00563/cells/product-name@d + hexdump -C /sys/bus/nvmem/devices/1-00563/cells/product-name@d,0 00000000 54 4e 34 38 4d 2d 50 2d 44 4e |TN48M-P-DN| 0000000a diff --git a/Documentation/arch/arm64/silicon-errata.rst b/Documentation/arch/arm64/silicon-errata.rst index e8c2ce1f9df6..45a7f4932fe0 100644 --- a/Documentation/arch/arm64/silicon-errata.rst +++ b/Documentation/arch/arm64/silicon-errata.rst @@ -243,3 +243,10 @@ stable kernels. +----------------+-----------------+-----------------+-----------------------------+ | ASR | ASR8601 | #8601001 | N/A | +----------------+-----------------+-----------------+-----------------------------+ ++----------------+-----------------+-----------------+-----------------------------+ +| Microsoft | Azure Cobalt 100| #2139208 | ARM64_ERRATUM_2139208 | ++----------------+-----------------+-----------------+-----------------------------+ +| Microsoft | Azure Cobalt 100| #2067961 | ARM64_ERRATUM_2067961 | ++----------------+-----------------+-----------------+-----------------------------+ +| Microsoft | Azure Cobalt 100| #2253138 | ARM64_ERRATUM_2253138 | ++----------------+-----------------+-----------------+-----------------------------+ diff --git a/Documentation/dev-tools/kunit/usage.rst b/Documentation/dev-tools/kunit/usage.rst index a9efab50eed8..22955d56b379 100644 --- a/Documentation/dev-tools/kunit/usage.rst +++ b/Documentation/dev-tools/kunit/usage.rst @@ -671,8 +671,23 @@ Testing Static Functions ------------------------ If we do not want to expose functions or variables for testing, one option is to -conditionally ``#include`` the test file at the end of your .c file. For -example: +conditionally export the used symbol. For example: + +.. code-block:: c + + /* In my_file.c */ + + VISIBLE_IF_KUNIT int do_interesting_thing(); + EXPORT_SYMBOL_IF_KUNIT(do_interesting_thing); + + /* In my_file.h */ + + #if IS_ENABLED(CONFIG_KUNIT) + int do_interesting_thing(void); + #endif + +Alternatively, you could conditionally ``#include`` the test file at the end of +your .c file. For example: .. code-block:: c diff --git a/Documentation/devicetree/bindings/Makefile b/Documentation/devicetree/bindings/Makefile index 2323fd5b7cda..129cf698fa8a 100644 --- a/Documentation/devicetree/bindings/Makefile +++ b/Documentation/devicetree/bindings/Makefile @@ -28,7 +28,10 @@ $(obj)/%.example.dts: $(src)/%.yaml check_dtschema_version FORCE find_all_cmd = find $(srctree)/$(src) \( -name '*.yaml' ! \ -name 'processed-schema*' \) -find_cmd = $(find_all_cmd) | sed 's|^$(srctree)/$(src)/||' | grep -F -e "$(subst :," -e ",$(DT_SCHEMA_FILES))" | sed 's|^|$(srctree)/$(src)/|' +find_cmd = $(find_all_cmd) | \ + sed 's|^$(srctree)/||' | \ + grep -F -e "$(subst :," -e ",$(DT_SCHEMA_FILES))" | \ + sed 's|^|$(srctree)/|' CHK_DT_DOCS := $(shell $(find_cmd)) quiet_cmd_yamllint = LINT $(src) diff --git a/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml b/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml index b29ce598f9aa..9952e0ef7767 100644 --- a/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml +++ b/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml @@ -7,7 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Ceva AHCI SATA Controller maintainers: - - Piyush Mehta <piyush.mehta@amd.com> + - Mubin Sayyed <mubin.sayyed@amd.com> + - Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> description: | The Ceva SATA controller mostly conforms to the AHCI interface with some diff --git a/Documentation/devicetree/bindings/display/bridge/nxp,tda998x.yaml b/Documentation/devicetree/bindings/display/bridge/nxp,tda998x.yaml index 21d995f29a1e..b8e9cf6ce4e6 100644 --- a/Documentation/devicetree/bindings/display/bridge/nxp,tda998x.yaml +++ b/Documentation/devicetree/bindings/display/bridge/nxp,tda998x.yaml @@ -29,19 +29,22 @@ properties: audio-ports: description: - Array of 8-bit values, 2 values per DAI (Documentation/sound/soc/dai.rst). + Array of 2 values per DAI (Documentation/sound/soc/dai.rst). The implementation allows one or two DAIs. If two DAIs are defined, they must be of different type. $ref: /schemas/types.yaml#/definitions/uint32-matrix + minItems: 1 + maxItems: 2 items: - minItems: 1 items: - description: | The first value defines the DAI type: TDA998x_SPDIF or TDA998x_I2S (see include/dt-bindings/display/tda998x.h). + enum: [ 1, 2 ] - description: The second value defines the tda998x AP_ENA reg content when the DAI in question is used. + maximum: 0xff '#sound-dai-cells': enum: [ 0, 1 ] diff --git a/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml b/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml index b1fd632718d4..bb93baa88879 100644 --- a/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml +++ b/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml @@ -12,7 +12,8 @@ description: PS_MODE). Every pin can be configured as input/output. maintainers: - - Piyush Mehta <piyush.mehta@amd.com> + - Mubin Sayyed <mubin.sayyed@amd.com> + - Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> properties: compatible: diff --git a/Documentation/devicetree/bindings/net/marvell,prestera.yaml b/Documentation/devicetree/bindings/net/marvell,prestera.yaml index 5ea8b73663a5..16ff892f7bbd 100644 --- a/Documentation/devicetree/bindings/net/marvell,prestera.yaml +++ b/Documentation/devicetree/bindings/net/marvell,prestera.yaml @@ -78,8 +78,8 @@ examples: pcie@0 { #address-cells = <3>; #size-cells = <2>; - ranges = <0x0 0x0 0x0 0x0 0x0 0x0>; - reg = <0x0 0x0 0x0 0x0 0x0 0x0>; + ranges = <0x02000000 0x0 0x100000 0x10000000 0x0 0x0>; + reg = <0x0 0x1000>; device_type = "pci"; switch@0,0 { diff --git a/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.yaml b/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.yaml index 49db66801429..1f1b42dde94d 100644 --- a/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.yaml +++ b/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.yaml @@ -7,7 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Zynq UltraScale+ MPSoC and Versal reset maintainers: - - Piyush Mehta <piyush.mehta@amd.com> + - Mubin Sayyed <mubin.sayyed@amd.com> + - Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> description: | The Zynq UltraScale+ MPSoC and Versal has several different resets. diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml index 8108c564dd78..aa32dc950e72 100644 --- a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml +++ b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml @@ -22,6 +22,7 @@ properties: - const: allwinner,sun6i-a31-spdif - const: allwinner,sun8i-h3-spdif - const: allwinner,sun50i-h6-spdif + - const: allwinner,sun50i-h616-spdif - items: - const: allwinner,sun8i-a83t-spdif - const: allwinner,sun8i-h3-spdif @@ -62,6 +63,8 @@ allOf: enum: - allwinner,sun6i-a31-spdif - allwinner,sun8i-h3-spdif + - allwinner,sun50i-h6-spdif + - allwinner,sun50i-h616-spdif then: required: @@ -73,7 +76,7 @@ allOf: contains: enum: - allwinner,sun8i-h3-spdif - - allwinner,sun50i-h6-spdif + - allwinner,sun50i-h616-spdif then: properties: diff --git a/Documentation/devicetree/bindings/sound/google,sc7280-herobrine.yaml b/Documentation/devicetree/bindings/sound/google,sc7280-herobrine.yaml index ec4b6e547ca6..cdcd7c6f21eb 100644 --- a/Documentation/devicetree/bindings/sound/google,sc7280-herobrine.yaml +++ b/Documentation/devicetree/bindings/sound/google,sc7280-herobrine.yaml @@ -7,7 +7,6 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Google SC7280-Herobrine ASoC sound card driver maintainers: - - Srinivasa Rao Mandadapu <srivasam@codeaurora.org> - Judy Hsiao <judyhsiao@chromium.org> description: diff --git a/Documentation/devicetree/bindings/tpm/tpm-common.yaml b/Documentation/devicetree/bindings/tpm/tpm-common.yaml index 90390624a8be..3c1241b2a43f 100644 --- a/Documentation/devicetree/bindings/tpm/tpm-common.yaml +++ b/Documentation/devicetree/bindings/tpm/tpm-common.yaml @@ -42,7 +42,7 @@ properties: resets: description: Reset controller to reset the TPM - $ref: /schemas/types.yaml#/definitions/phandle + maxItems: 1 reset-gpios: description: Output GPIO pin to reset the TPM diff --git a/Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml b/Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml index 88cc1e3a0c88..b2b509b3944d 100644 --- a/Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml +++ b/Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml @@ -55,9 +55,12 @@ properties: samsung,sysreg: $ref: /schemas/types.yaml#/definitions/phandle-array - description: Should be phandle/offset pair. The phandle to the syscon node - which indicates the FSYSx sysreg interface and the offset of - the control register for UFS io coherency setting. + items: + - items: + - description: phandle to FSYSx sysreg node + - description: offset of the control register for UFS io coherency setting + description: + Phandle and offset to the FSYSx sysreg for UFS io coherency setting. dma-coherent: true diff --git a/Documentation/devicetree/bindings/usb/dwc3-xilinx.yaml b/Documentation/devicetree/bindings/usb/dwc3-xilinx.yaml index bb373eb025a5..00f87a558c7d 100644 --- a/Documentation/devicetree/bindings/usb/dwc3-xilinx.yaml +++ b/Documentation/devicetree/bindings/usb/dwc3-xilinx.yaml @@ -7,7 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Xilinx SuperSpeed DWC3 USB SoC controller maintainers: - - Piyush Mehta <piyush.mehta@amd.com> + - Mubin Sayyed <mubin.sayyed@amd.com> + - Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> properties: compatible: diff --git a/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml b/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml index 6d4cfd943f58..445183d9d6db 100644 --- a/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml +++ b/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml @@ -16,8 +16,9 @@ description: USB 2.0 traffic. maintainers: - - Piyush Mehta <piyush.mehta@amd.com> - Michal Simek <michal.simek@amd.com> + - Mubin Sayyed <mubin.sayyed@amd.com> + - Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> properties: compatible: diff --git a/Documentation/devicetree/bindings/usb/xlnx,usb2.yaml b/Documentation/devicetree/bindings/usb/xlnx,usb2.yaml index 868dffe314bc..a7f75fe36665 100644 --- a/Documentation/devicetree/bindings/usb/xlnx,usb2.yaml +++ b/Documentation/devicetree/bindings/usb/xlnx,usb2.yaml @@ -7,7 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Xilinx udc controller maintainers: - - Piyush Mehta <piyush.mehta@amd.com> + - Mubin Sayyed <mubin.sayyed@amd.com> + - Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> properties: compatible: diff --git a/Documentation/kbuild/Kconfig.recursion-issue-01 b/Documentation/kbuild/Kconfig.recursion-issue-01 index e8877db0461f..ac49836d8ecf 100644 --- a/Documentation/kbuild/Kconfig.recursion-issue-01 +++ b/Documentation/kbuild/Kconfig.recursion-issue-01 @@ -16,13 +16,13 @@ # that are possible for CORE. So for example if CORE_BELL_A_ADVANCED is 'y', # CORE must be 'y' too. # -# * What influences CORE_BELL_A_ADVANCED ? +# * What influences CORE_BELL_A_ADVANCED? # # As the name implies CORE_BELL_A_ADVANCED is an advanced feature of # CORE_BELL_A so naturally it depends on CORE_BELL_A. So if CORE_BELL_A is 'y' # we know CORE_BELL_A_ADVANCED can be 'y' too. # -# * What influences CORE_BELL_A ? +# * What influences CORE_BELL_A? # # CORE_BELL_A depends on CORE, so CORE influences CORE_BELL_A. # @@ -34,7 +34,7 @@ # the "recursive dependency detected" error. # # Reading the Documentation/kbuild/Kconfig.recursion-issue-01 file it may be -# obvious that an easy to solution to this problem should just be the removal +# obvious that an easy solution to this problem should just be the removal # of the "select CORE" from CORE_BELL_A_ADVANCED as that is implicit already # since CORE_BELL_A depends on CORE. Recursive dependency issues are not always # so trivial to resolve, we provide another example below of practical diff --git a/Documentation/netlink/specs/dpll.yaml b/Documentation/netlink/specs/dpll.yaml index b14aed18065f..3dcc9ece272a 100644 --- a/Documentation/netlink/specs/dpll.yaml +++ b/Documentation/netlink/specs/dpll.yaml @@ -384,8 +384,6 @@ operations: - type dump: - pre: dpll-lock-dumpit - post: dpll-unlock-dumpit reply: *dev-attrs - @@ -473,8 +471,6 @@ operations: - fractional-frequency-offset dump: - pre: dpll-lock-dumpit - post: dpll-unlock-dumpit request: attributes: - id diff --git a/Documentation/netlink/specs/rt_link.yaml b/Documentation/netlink/specs/rt_link.yaml index 1ad01d52a863..8e4d19adee8c 100644 --- a/Documentation/netlink/specs/rt_link.yaml +++ b/Documentation/netlink/specs/rt_link.yaml @@ -942,6 +942,10 @@ attribute-sets: - name: gro-ipv4-max-size type: u32 + - + name: dpll-pin + type: nest + nested-attributes: link-dpll-pin-attrs - name: af-spec-attrs attributes: @@ -1627,6 +1631,12 @@ attribute-sets: - name: used type: u8 + - + name: link-dpll-pin-attrs + attributes: + - + name: id + type: u32 sub-messages: - diff --git a/Documentation/networking/devlink/devlink-port.rst b/Documentation/networking/devlink/devlink-port.rst index e33ad2401ad7..562f46b41274 100644 --- a/Documentation/networking/devlink/devlink-port.rst +++ b/Documentation/networking/devlink/devlink-port.rst @@ -126,7 +126,7 @@ Users may also set the RoCE capability of the function using `devlink port function set roce` command. Users may also set the function as migratable using -'devlink port function set migratable' command. +`devlink port function set migratable` command. Users may also set the IPsec crypto capability of the function using `devlink port function set ipsec_crypto` command. diff --git a/Documentation/networking/net_cachelines/net_device.rst b/Documentation/networking/net_cachelines/net_device.rst index e75a53593bb9..dceb49d56a91 100644 --- a/Documentation/networking/net_cachelines/net_device.rst +++ b/Documentation/networking/net_cachelines/net_device.rst @@ -136,8 +136,8 @@ struct_netpoll_info* npinfo - possible_net_t nd_net - read_mostly (dev_net)napi_busy_loop,tcp_v(4/6)_rcv,ip(v6)_rcv,ip(6)_input,ip(6)_input_finish void* ml_priv enum_netdev_ml_priv_type ml_priv_type -struct_pcpu_lstats__percpu* lstats -struct_pcpu_sw_netstats__percpu* tstats +struct_pcpu_lstats__percpu* lstats read_mostly dev_lstats_add() +struct_pcpu_sw_netstats__percpu* tstats read_mostly dev_sw_netstats_tx_add() struct_pcpu_dstats__percpu* dstats struct_garp_port* garp_port struct_mrp_port* mrp_port diff --git a/Documentation/networking/net_cachelines/tcp_sock.rst b/Documentation/networking/net_cachelines/tcp_sock.rst index 97d7a5c8e01c..1c154cbd1848 100644 --- a/Documentation/networking/net_cachelines/tcp_sock.rst +++ b/Documentation/networking/net_cachelines/tcp_sock.rst @@ -38,13 +38,13 @@ u32 max_window read_mostly - u32 mss_cache read_mostly read_mostly tcp_rate_check_app_limited,tcp_current_mss,tcp_sync_mss,tcp_sndbuf_expand,tcp_tso_should_defer(tx);tcp_update_pacing_rate,tcp_clean_rtx_queue(rx) u32 window_clamp read_mostly read_write tcp_rcv_space_adjust,__tcp_select_window u32 rcv_ssthresh read_mostly - __tcp_select_window -u82 scaling_ratio +u8 scaling_ratio read_mostly read_mostly tcp_win_from_space struct tcp_rack u16 advmss - read_mostly tcp_rcv_space_adjust u8 compressed_ack u8:2 dup_ack_counter u8:1 tlp_retrans -u8:1 tcp_usec_ts +u8:1 tcp_usec_ts read_mostly read_mostly u32 chrono_start read_write - tcp_chrono_start/stop(tcp_write_xmit,tcp_cwnd_validate,tcp_send_syn_data) u32[3] chrono_stat read_write - tcp_chrono_start/stop(tcp_write_xmit,tcp_cwnd_validate,tcp_send_syn_data) u8:2 chrono_type read_write - tcp_chrono_start/stop(tcp_write_xmit,tcp_cwnd_validate,tcp_send_syn_data) diff --git a/Documentation/process/cve.rst b/Documentation/process/cve.rst new file mode 100644 index 000000000000..5e2753eff729 --- /dev/null +++ b/Documentation/process/cve.rst @@ -0,0 +1,121 @@ +==== +CVEs +==== + +Common Vulnerabilities and Exposure (CVE®) numbers were developed as an +unambiguous way to identify, define, and catalog publicly disclosed +security vulnerabilities. Over time, their usefulness has declined with +regards to the kernel project, and CVE numbers were very often assigned +in inappropriate ways and for inappropriate reasons. Because of this, +the kernel development community has tended to avoid them. However, the +combination of continuing pressure to assign CVEs and other forms of +security identifiers, and ongoing abuses by individuals and companies +outside of the kernel community has made it clear that the kernel +community should have control over those assignments. + +The Linux kernel developer team does have the ability to assign CVEs for +potential Linux kernel security issues. This assignment is independent +of the :doc:`normal Linux kernel security bug reporting +process<../process/security-bugs>`. + +A list of all assigned CVEs for the Linux kernel can be found in the +archives of the linux-cve mailing list, as seen on +https://lore.kernel.org/linux-cve-announce/. To get notice of the +assigned CVEs, please `subscribe +<https://subspace.kernel.org/subscribing.html>`_ to that mailing list. + +Process +======= + +As part of the normal stable release process, kernel changes that are +potentially security issues are identified by the developers responsible +for CVE number assignments and have CVE numbers automatically assigned +to them. These assignments are published on the linux-cve-announce +mailing list as announcements on a frequent basis. + +Note, due to the layer at which the Linux kernel is in a system, almost +any bug might be exploitable to compromise the security of the kernel, +but the possibility of exploitation is often not evident when the bug is +fixed. Because of this, the CVE assignment team is overly cautious and +assign CVE numbers to any bugfix that they identify. This +explains the seemingly large number of CVEs that are issued by the Linux +kernel team. + +If the CVE assignment team misses a specific fix that any user feels +should have a CVE assigned to it, please email them at <cve@kernel.org> +and the team there will work with you on it. Note that no potential +security issues should be sent to this alias, it is ONLY for assignment +of CVEs for fixes that are already in released kernel trees. If you +feel you have found an unfixed security issue, please follow the +:doc:`normal Linux kernel security bug reporting +process<../process/security-bugs>`. + +No CVEs will be automatically assigned for unfixed security issues in +the Linux kernel; assignment will only automatically happen after a fix +is available and applied to a stable kernel tree, and it will be tracked +that way by the git commit id of the original fix. If anyone wishes to +have a CVE assigned before an issue is resolved with a commit, please +contact the kernel CVE assignment team at <cve@kernel.org> to get an +identifier assigned from their batch of reserved identifiers. + +No CVEs will be assigned for any issue found in a version of the kernel +that is not currently being actively supported by the Stable/LTS kernel +team. A list of the currently supported kernel branches can be found at +https://kernel.org/releases.html + +Disputes of assigned CVEs +========================= + +The authority to dispute or modify an assigned CVE for a specific kernel +change lies solely with the maintainers of the relevant subsystem +affected. This principle ensures a high degree of accuracy and +accountability in vulnerability reporting. Only those individuals with +deep expertise and intimate knowledge of the subsystem can effectively +assess the validity and scope of a reported vulnerability and determine +its appropriate CVE designation. Any attempt to modify or dispute a CVE +outside of this designated authority could lead to confusion, inaccurate +reporting, and ultimately, compromised systems. + +Invalid CVEs +============ + +If a security issue is found in a Linux kernel that is only supported by +a Linux distribution due to the changes that have been made by that +distribution, or due to the distribution supporting a kernel version +that is no longer one of the kernel.org supported releases, then a CVE +can not be assigned by the Linux kernel CVE team, and must be asked for +from that Linux distribution itself. + +Any CVE that is assigned against the Linux kernel for an actively +supported kernel version, by any group other than the kernel assignment +CVE team should not be treated as a valid CVE. Please notify the +kernel CVE assignment team at <cve@kernel.org> so that they can work to +invalidate such entries through the CNA remediation process. + +Applicability of specific CVEs +============================== + +As the Linux kernel can be used in many different ways, with many +different ways of accessing it by external users, or no access at all, +the applicability of any specific CVE is up to the user of Linux to +determine, it is not up to the CVE assignment team. Please do not +contact us to attempt to determine the applicability of any specific +CVE. + +Also, as the source tree is so large, and any one system only uses a +small subset of the source tree, any users of Linux should be aware that +large numbers of assigned CVEs are not relevant for their systems. + +In short, we do not know your use case, and we do not know what portions +of the kernel that you use, so there is no way for us to determine if a +specific CVE is relevant for your system. + +As always, it is best to take all released kernel changes, as they are +tested together in a unified whole by many community members, and not as +individual cherry-picked changes. Also note that for many bugs, the +solution to the overall problem is not found in a single change, but by +the sum of many fixes on top of each other. Ideally CVEs will be +assigned to all fixes for all issues, but sometimes we will fail to +notice fixes, therefore assume that some changes without a CVE assigned +might be relevant to take. + diff --git a/Documentation/process/index.rst b/Documentation/process/index.rst index 6cb732dfcc72..de9cbb7bd7eb 100644 --- a/Documentation/process/index.rst +++ b/Documentation/process/index.rst @@ -81,6 +81,7 @@ of special classes of bugs: regressions and security problems. handling-regressions security-bugs + cve embargoed-hardware-issues Maintainer information diff --git a/Documentation/process/security-bugs.rst b/Documentation/process/security-bugs.rst index 692a3ba56cca..56c560a00b37 100644 --- a/Documentation/process/security-bugs.rst +++ b/Documentation/process/security-bugs.rst @@ -99,9 +99,8 @@ CVE assignment The security team does not assign CVEs, nor do we require them for reports or fixes, as this can needlessly complicate the process and may delay the bug handling. If a reporter wishes to have a CVE identifier -assigned, they should find one by themselves, for example by contacting -MITRE directly. However under no circumstances will a patch inclusion -be delayed to wait for a CVE identifier to arrive. +assigned for a confirmed issue, they can contact the :doc:`kernel CVE +assignment team<../process/cve>` to obtain one. Non-disclosure agreements ------------------------- diff --git a/Documentation/sphinx/kernel_feat.py b/Documentation/sphinx/kernel_feat.py index b9df61eb4501..03ace5f01b5c 100644 --- a/Documentation/sphinx/kernel_feat.py +++ b/Documentation/sphinx/kernel_feat.py @@ -109,7 +109,7 @@ class KernelFeat(Directive): else: out_lines += line + "\n" - nodeList = self.nestedParse(out_lines, fname) + nodeList = self.nestedParse(out_lines, self.arguments[0]) return nodeList def nestedParse(self, lines, fname): diff --git a/Documentation/usb/gadget-testing.rst b/Documentation/usb/gadget-testing.rst index 8cd62c466d20..077dfac7ed98 100644 --- a/Documentation/usb/gadget-testing.rst +++ b/Documentation/usb/gadget-testing.rst @@ -448,17 +448,17 @@ Function-specific configfs interface The function name to use when creating the function directory is "ncm". The NCM function provides these attributes in its function directory: - =============== ================================================== - ifname network device interface name associated with this - function instance - qmult queue length multiplier for high and super speed - host_addr MAC address of host's end of this - Ethernet over USB link - dev_addr MAC address of device's end of this - Ethernet over USB link - max_segment_size Segment size required for P2P connections. This - will set MTU to (max_segment_size - 14 bytes) - =============== ================================================== + ======================= ================================================== + ifname network device interface name associated with this + function instance + qmult queue length multiplier for high and super speed + host_addr MAC address of host's end of this + Ethernet over USB link + dev_addr MAC address of device's end of this + Ethernet over USB link + max_segment_size Segment size required for P2P connections. This + will set MTU to 14 bytes + ======================= ================================================== and after creating the functions/ncm.<instance name> they contain default values: qmult is 5, dev_addr and host_addr are randomly selected. |