diff options
Diffstat (limited to 'Documentation')
8 files changed, 141 insertions, 21 deletions
diff --git a/Documentation/devicetree/bindings/regulator/max8997-regulator.txt b/Documentation/devicetree/bindings/regulator/max8997-regulator.txt index 6fe825b8ac1b..b53c5e2b335f 100644 --- a/Documentation/devicetree/bindings/regulator/max8997-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/max8997-regulator.txt @@ -35,6 +35,7 @@ Optional properties: - interrupts: Interrupt specifiers for two interrupt sources. - First interrupt specifier is for 'irq1' interrupt. - Second interrupt specifier is for 'alert' interrupt. +- charger-supply: regulator node for charging current. - max8997,pmic-buck1-uses-gpio-dvs: 'buck1' can be controlled by gpio dvs. - max8997,pmic-buck2-uses-gpio-dvs: 'buck2' can be controlled by gpio dvs. - max8997,pmic-buck5-uses-gpio-dvs: 'buck5' can be controlled by gpio dvs. diff --git a/Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt b/Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt index d86584ed4d93..451cc4e86b01 100644 --- a/Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt @@ -4,7 +4,8 @@ Required properties: - compatible: "microchip,mcp16502" - reg: I2C slave address - lpm-gpios: GPIO for LPM pin. Note that this GPIO *must* remain high during - suspend-to-ram, keeping the PMIC into HIBERNATE mode. + suspend-to-ram, keeping the PMIC into HIBERNATE mode; this + property is optional; - regulators: A node that houses a sub-node for each regulator within the device. Each sub-node is identified using the node's name. The content of each sub-node is defined by the diff --git a/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml b/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml new file mode 100644 index 000000000000..61dd5af80db6 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/mt6315-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek MT6315 Regulator + +maintainers: + - Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com> + +description: | + The MT6315 is a power management IC (PMIC) configurable with SPMI. + that contains 4 BUCKs output which can combine with each other + by different efuse settings. + +properties: + compatible: + const: mediatek,mt6315-regulator + + reg: + maxItems: 1 + + regulators: + type: object + description: List of regulators and its properties + + patternProperties: + "^vbuck[1-4]$": + type: object + $ref: "regulator.yaml#" + + properties: + regulator-name: + pattern: "^vbuck[1-4]$" + + additionalProperties: false + +required: + - compatible + - reg + - regulators + +additionalProperties: false + +examples: + - | + pmic@6 { + compatible = "mediatek,mt6315-regulator"; + reg = <0x6 0>; + + regulators { + vbuck1 { + regulator-compatible = "vbuck1"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1193750>; + regulator-enable-ramp-delay = <256>; + regulator-allowed-modes = <0 1 2 4>; + }; + + vbuck3 { + regulator-compatible = "vbuck3"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1193750>; + regulator-enable-ramp-delay = <256>; + regulator-allowed-modes = <0 1 2 4>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml b/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml index c2b0a8b6da1e..f70f2e758a00 100644 --- a/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml @@ -87,6 +87,11 @@ properties: additionalProperties: false + sd-vsel-gpios: + description: GPIO that is used to switch LDO5 between being configured by + LDO5CTRL_L or LDO5CTRL_H register. Use this if the SD_VSEL signal is + connected to a host GPIO. + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml b/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml index 956156fe52a3..8761437ed8ad 100644 --- a/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml @@ -62,8 +62,11 @@ properties: $ref: "/schemas/types.yaml#/definitions/uint32" minimum: 2100 maximum: 4500 + deprecated: true description: BUCK regulators current limit in mA. + This property is deprecated, please use + "regulator-max-microamp" instead. Listed current limits in mA are, 2100 (default) @@ -73,21 +76,11 @@ properties: nxp,phase-shift: $ref: "/schemas/types.yaml#/definitions/uint32" - minimum: 45 - maximum: 0 + default: 0 + enum: [ 0, 45, 90, 135, 180, 225, 270, 315 ] description: BUCK regulators phase shift control in degrees. - Listed phase shift control values in degrees are, - 45 - 90 - 135 - 180 - 225 - 270 - 315 - 0 (default) - unevaluatedProperties: false "^vsnvs$": diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt index 7d462b899473..ce1e04354006 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt @@ -50,6 +50,8 @@ First Level Nodes - PMIC "qcom,pm8350-rpmh-regulators" "qcom,pm8350c-rpmh-regulators" "qcom,pm8998-rpmh-regulators" + "qcom,pmc8180-rpmh-regulators" + "qcom,pmc8180c-rpmh-regulators" "qcom,pmi8998-rpmh-regulators" "qcom,pm6150-rpmh-regulators" "qcom,pm6150l-rpmh-regulators" diff --git a/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml index 53853ec20fe2..cf784bd1f5e5 100644 --- a/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml @@ -22,11 +22,17 @@ properties: type: object properties: + qcom,soft-start-us: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Regulator soft start time in microseconds. + enum: [200, 400, 600, 800] + default: 200 interrupts: - maxItems: 1 + minItems: 1 + maxItems: 2 description: - Short-circuit interrupt for lab. + Short-circuit and over-current interrupts for lab. required: - interrupts @@ -35,11 +41,17 @@ properties: type: object properties: + qcom,discharge-resistor-kohms: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Discharge resistor value in KiloOhms. + enum: [300, 64, 32, 16] + default: 300 interrupts: - maxItems: 1 + minItems: 1 + maxItems: 2 description: - Short-circuit interrupt for lab. + Short-circuit and over-current interrupts for ibb. required: - interrupts @@ -57,13 +69,15 @@ examples: compatible = "qcom,pmi8998-lab-ibb"; lab { - interrupts = <0x3 0x0 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "sc-err"; + interrupts = <0x3 0xde 0x1 IRQ_TYPE_EDGE_RISING>, + <0x3 0xde 0x0 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "sc-err", "ocp"; }; ibb { - interrupts = <0x3 0x2 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "sc-err"; + interrupts = <0x3 0xdc 0x2 IRQ_TYPE_EDGE_RISING>, + <0x3 0xdc 0x0 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "sc-err", "ocp"; }; }; diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt4831-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt4831-regulator.yaml new file mode 100644 index 000000000000..d9c23333e157 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/richtek,rt4831-regulator.yaml @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/richtek,rt4831-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT4831 Display Bias Voltage Regulator + +maintainers: + - ChiYuan Huang <cy_huang@richtek.com> + +description: | + RT4831 is a multifunctional device that can provide power to the LCD display + and LCD backlight. + + For Display Bias Voltage DSVP and DSVN, the output range is about 4V to 6.5V. + It is sufficient to meet the current LCD power requirement. + + DSVLCM is a boost regulator in IC internal as DSVP and DSVN input power. + Its voltage should be configured above 0.15V to 0.2V gap larger than the + voltage needed for DSVP and DSVN. Too much voltage gap could improve the + voltage drop from the heavy loading scenario. But it also make the power + efficiency worse. It's a trade-off. + + Datasheet is available at + https://www.richtek.com/assets/product_file/RT4831A/DS4831A-05.pdf + +patternProperties: + "^DSV(LCM|P|N)$": + type: object + $ref: regulator.yaml# + description: + Properties for single Display Bias Voltage regulator. + +additionalProperties: false |