diff options
Diffstat (limited to 'arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi | 53 |
1 files changed, 43 insertions, 10 deletions
diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi index cefaa6994623..31e9f7049f73 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi +++ b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi @@ -41,6 +41,20 @@ regulator-max-microvolt = <5000000>; }; }; + + usbphy { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + usbphy0: usbphy@0 { + compatible = "usb-nop-xceiv"; + reg = <0>; + vcc-supply = <&sw3_reg>; + clocks = <&clks 0>; + clock-names = "main_clk"; + }; + }; }; &audmux { @@ -66,9 +80,9 @@ status = "okay"; pmic: mc13783@0 { - #address-cells = <1>; - #size-cells = <0>; compatible = "fsl,mc13783"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; reg = <0>; spi-cs-high; spi-max-frequency = <20000000>; @@ -166,7 +180,7 @@ &fec { phy-mode = "mii"; - phy-reset-gpios = <&gpio3 30 GPIO_ACTIVE_HIGH>; + phy-reset-gpios = <&gpio3 30 GPIO_ACTIVE_LOW>; phy-supply = <®_3v3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec1>; @@ -204,7 +218,6 @@ MX27_PAD_CSPI1_MOSI__CSPI1_MOSI 0x0 MX27_PAD_CSPI1_SCLK__CSPI1_SCLK 0x0 MX27_PAD_CSPI1_SS0__GPIO4_28 0x0 /* SPI1 CS0 */ - MX27_PAD_USB_PWR__GPIO2_23 0x0 /* PMIC IRQ */ >; }; @@ -251,6 +264,21 @@ >; }; + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX27_PAD_USB_PWR__GPIO2_23 0x0 /* PMIC IRQ */ + >; + }; + + pinctrl_ssi1: ssi1grp { + fsl,pins = < + MX27_PAD_SSI1_FS__SSI1_FS 0x0 + MX27_PAD_SSI1_RXDAT__SSI1_RXDAT 0x0 + MX27_PAD_SSI1_TXDAT__SSI1_TXDAT 0x0 + MX27_PAD_SSI1_CLK__SSI1_CLK 0x0 + >; + }; + pinctrl_usbotg: usbotggrp { fsl,pins = < MX27_PAD_USBOTG_CLK__USBOTG_CLK 0x0 @@ -279,23 +307,28 @@ status = "okay"; }; +&ssi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssi1>; + fsl,mode = "i2s-slave"; + status = "okay"; +}; + &usbotg { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbotg>; dr_mode = "otg"; phy_type = "ulpi"; + fsl,usbphy = <&usbphy0>; vbus-supply = <&sw3_reg>; + disable-over-current; status = "okay"; }; -&usbphy0 { - vcc-supply = <&sw3_reg>; -}; - &weim { status = "okay"; - nor: nor@c0000000 { + nor: nor@0,0 { compatible = "cfi-flash"; reg = <0 0x00000000 0x02000000>; bank-width = <2>; @@ -305,7 +338,7 @@ #size-cells = <1>; }; - sram: sram@c8000000 { + sram: sram@1,0 { compatible = "mtd-ram"; reg = <1 0x00000000 0x00800000>; bank-width = <2>; |