diff options
Diffstat (limited to 'arch/arm/boot/dts/imx6dl-prtvt7.dts')
| -rw-r--r-- | arch/arm/boot/dts/imx6dl-prtvt7.dts | 203 |
1 files changed, 190 insertions, 13 deletions
diff --git a/arch/arm/boot/dts/imx6dl-prtvt7.dts b/arch/arm/boot/dts/imx6dl-prtvt7.dts index 190d26642bc8..b86deebef7b7 100644 --- a/arch/arm/boot/dts/imx6dl-prtvt7.dts +++ b/arch/arm/boot/dts/imx6dl-prtvt7.dts @@ -6,6 +6,7 @@ /dts-v1/; #include "imx6dl.dtsi" #include "imx6qdl-prti6q.dtsi" +#include <dt-bindings/display/sdtv-standards.h> #include <dt-bindings/input/input.h> #include <dt-bindings/leds/common.h> #include <dt-bindings/sound/fsl-imx-audmux.h> @@ -28,6 +29,35 @@ power-supply = <®_bl_12v0>; }; + display { + compatible = "fsl,imx-parallel-display"; + pinctrl-0 = <&pinctrl_ipu1_disp>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + display_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + port@1 { + reg = <1>; + + display_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&vdiv_vaccu>; + }; + keys { compatible = "gpio-keys"; autorepeat; @@ -135,6 +165,30 @@ }; }; + panel { + compatible = "innolux,g070y2-t02"; + backlight = <&backlight_lcd>; + power-supply = <®_3v3>; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; + + connector { + compatible = "composite-video-connector"; + label = "Composite0"; + sdtv-standards = <SDTV_STD_PAL_B>; + + port { + comp0_out: endpoint { + remote-endpoint = <&tvp5150_comp0_in>; + }; + }; + }; + reg_bl_12v0: regulator-bl-12v0 { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -146,6 +200,13 @@ enable-active-high; }; + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + reg_1v8: regulator-1v8 { compatible = "regulator-fixed"; regulator-name = "1v8"; @@ -179,6 +240,64 @@ frame-master; }; }; + + thermal-zones { + chassis-thermal { + polling-delay = <20000>; + polling-delay-passive = <0>; + thermal-sensors = <&tsens0>; + }; + + touch-thermal0 { + polling-delay = <20000>; + polling-delay-passive = <0>; + thermal-sensors = <&touch_temp0>; + }; + + touch-thermal1 { + polling-delay = <20000>; + polling-delay-passive = <0>; + thermal-sensors = <&touch_temp1>; + }; + }; + + touchscreen { + compatible = "resistive-adc-touch"; + io-channels = <&adc_ts 1>, <&adc_ts 3>, <&adc_ts 4>, + <&adc_ts 5>; + io-channel-names = "y", "z1", "z2", "x"; + touchscreen-min-pressure = <64687>; + touchscreen-inverted-x; + touchscreen-inverted-y; + touchscreen-x-plate-ohms = <300>; + touchscreen-y-plate-ohms = <800>; + }; + + touch_temp0: touch-temperature-sensor0 { + compatible = "generic-adc-thermal"; + #thermal-sensor-cells = <0>; + io-channels = <&adc_ts 0>; + io-channel-names = "sensor-channel"; + temperature-lookup-table = < (-40000) 736 + 85000 474>; + }; + + touch_temp1: touch-temperature-sensor1 { + compatible = "generic-adc-thermal"; + #thermal-sensor-cells = <0>; + io-channels = <&adc_ts 7>; + io-channel-names = "sensor-channel"; + temperature-lookup-table = < (-40000) 826 + 85000 609>; + }; + + vdiv_vaccu: voltage-divider-vaccu { + compatible = "voltage-divider"; + io-channels = <&adc_ts 2>; + output-ohms = <2500>; + full-ohms = <64000>; + #io-channel-cells = <0>; + }; }; &audmux { @@ -221,22 +340,41 @@ pinctrl-0 = <&pinctrl_ecspi2>; status = "okay"; - touchscreen@0 { - compatible = "ti,tsc2046"; + adc_ts: adc@0 { + compatible = "ti,tsc2046e-adc"; reg = <0>; pinctrl-0 = <&pinctrl_tsc>; pinctrl-names ="default"; - spi-max-frequency = <100000>; - interrupts-extended = <&gpio3 20 IRQ_TYPE_EDGE_FALLING>; - pendown-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>; - touchscreen-max-pressure = <4095>; - ti,vref-delay-usecs = /bits/ 16 <100>; - ti,x-plate-ohms = /bits/ 16 <800>; - ti,y-plate-ohms = /bits/ 16 <300>; - ti,debounce-max = /bits/ 16 <3>; - ti,debounce-tol = /bits/ 16 <70>; - ti,debounce-rep = /bits/ 16 <3>; - wakeup-source; + spi-max-frequency = <1000000>; + interrupts-extended = <&gpio3 20 IRQ_TYPE_LEVEL_LOW>; + #io-channel-cells = <1>; + + #address-cells = <1>; + #size-cells = <0>; + + channel@1 { + reg = <1>; + settling-time-us = <700>; + oversampling-ratio = <5>; + }; + + channel@3 { + reg = <3>; + settling-time-us = <700>; + oversampling-ratio = <5>; + }; + + channel@4 { + reg = <4>; + settling-time-us = <700>; + oversampling-ratio = <5>; + }; + + channel@5 { + reg = <5>; + settling-time-us = <700>; + oversampling-ratio = <5>; + }; }; }; @@ -252,6 +390,31 @@ VDDIO-supply = <®_3v3>; VDDD-supply = <®_1v8>; }; + + video@5c { + compatible = "ti,tvp5150"; + reg = <0x5c>; + + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + tvp5150_comp0_in: endpoint { + remote-endpoint = <&comp0_out>; + }; + }; + + /* Output port 2 is video output pad */ + port@2 { + reg = <2>; + + tvp5151_to_ipu1_csi0_mux: endpoint { + remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>; + }; + }; + }; }; &i2c3 { @@ -260,6 +423,12 @@ reg = <0x51>; }; + tsens0: temperature-sensor@70 { + compatible = "ti,tmp103"; + reg = <0x70>; + #thermal-sensor-cells = <0>; + }; + gpio_pca: gpio@74 { compatible = "nxp,pca9539"; reg = <0x74>; @@ -275,6 +444,14 @@ status = "okay"; }; +&ipu1_di0_disp0 { + remote-endpoint = <&display_in>; +}; + +&ipu1_csi0_mux_from_parallel_sensor { + remote-endpoint = <&tvp5151_to_ipu1_csi0_mux>; +}; + &pwm1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; |