summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/imx6q-dhcom-pdk2.dts')
-rw-r--r--arch/arm/boot/dts/imx6q-dhcom-pdk2.dts376
1 files changed, 11 insertions, 365 deletions
diff --git a/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts b/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts
index 4b8801e91bd4..d4d57370615d 100644
--- a/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts
+++ b/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts
@@ -2,378 +2,24 @@
/*
* Copyright (C) 2015-2021 DH electronics GmbH
* Copyright (C) 2018 Marek Vasut <marex@denx.de>
+ *
+ * DHCOM iMX6 variant:
+ * DHCM-iMX6Q-C0800-R102-F0819-E-SD-RTC-T-HS-I-01D2
+ * DHCOM PCB number: 493-300 or newer
+ * PDK2 PCB number: 516-400 or newer
*/
-
/dts-v1/;
-#include "imx6q-dhcom-som.dtsi"
-#include <dt-bindings/leds/common.h>
+#include "imx6q.dtsi"
+#include "imx6qdl-dhcom-som.dtsi"
+#include "imx6qdl-dhcom-pdk2.dtsi"
/ {
- model = "Freescale i.MX6 Quad DHCOM Premium Developer Kit (2)";
- compatible = "dh,imx6q-dhcom-pdk2", "dh,imx6q-dhcom-som", "fsl,imx6q";
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- clk_ext_audio_codec: clock-codec {
- #clock-cells = <0>;
- clock-frequency = <24000000>;
- compatible = "fixed-clock";
- };
-
- display_bl: display-bl {
- brightness-levels = <0 16 22 30 40 55 75 102 138 188 255>;
- compatible = "pwm-backlight";
- default-brightness-level = <8>;
- enable-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>; /* GPIO G */
- pwms = <&pwm1 0 50000 PWM_POLARITY_INVERTED>;
- status = "okay";
- };
-
- lcd_display: disp0 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx-parallel-display";
- interface-pix-fmt = "rgb24";
- pinctrl-0 = <&pinctrl_ipu1_lcdif &pinctrl_dhcom_g>;
- pinctrl-names = "default";
- status = "okay";
-
- port@0 {
- reg = <0>;
-
- lcd_display_in: endpoint {
- remote-endpoint = <&ipu1_di0_disp0>;
- };
- };
-
- port@1 {
- reg = <1>;
-
- lcd_display_out: endpoint {
- remote-endpoint = <&lcd_panel_in>;
- };
- };
- };
-
- gpio-keys {
- #size-cells = <0>;
- compatible = "gpio-keys";
-
- button-0 {
- gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; /* GPIO A */
- label = "TA1-GPIO-A";
- linux,code = <KEY_A>;
- pinctrl-0 = <&pinctrl_dhcom_a>;
- pinctrl-names = "default";
- wakeup-source;
- };
-
- button-1 {
- gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; /* GPIO B */
- label = "TA2-GPIO-B";
- linux,code = <KEY_B>;
- pinctrl-0 = <&pinctrl_dhcom_b>;
- pinctrl-names = "default";
- wakeup-source;
- };
-
- button-2 {
- gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; /* GPIO C */
- label = "TA3-GPIO-C";
- linux,code = <KEY_C>;
- pinctrl-0 = <&pinctrl_dhcom_c>;
- pinctrl-names = "default";
- wakeup-source;
- };
-
- button-3 {
- gpios = <&gpio6 3 GPIO_ACTIVE_LOW>; /* GPIO D */
- label = "TA4-GPIO-D";
- linux,code = <KEY_D>;
- pinctrl-0 = <&pinctrl_dhcom_d>;
- pinctrl-names = "default";
- wakeup-source;
- };
- };
-
- led {
- compatible = "gpio-leds";
-
- /*
- * Disable led-5, because GPIO E is
- * already used as touch interrupt.
- */
- led-5 {
- color = <LED_COLOR_ID_GREEN>;
- default-state = "off";
- function = LED_FUNCTION_INDICATOR;
- gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* GPIO E */
- pinctrl-0 = <&pinctrl_dhcom_e>;
- pinctrl-names = "default";
- status = "disabled";
- };
-
- led-6 {
- color = <LED_COLOR_ID_GREEN>;
- default-state = "off";
- function = LED_FUNCTION_INDICATOR;
- gpios = <&gpio4 20 GPIO_ACTIVE_HIGH>; /* GPIO F */
- pinctrl-0 = <&pinctrl_dhcom_f>;
- pinctrl-names = "default";
- };
-
- led-7 {
- color = <LED_COLOR_ID_GREEN>;
- default-state = "off";
- function = LED_FUNCTION_INDICATOR;
- gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* GPIO H */
- pinctrl-0 = <&pinctrl_dhcom_h>;
- pinctrl-names = "default";
- };
-
- led-8 {
- color = <LED_COLOR_ID_GREEN>;
- default-state = "off";
- function = LED_FUNCTION_INDICATOR;
- gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* GPIO I */
- pinctrl-0 = <&pinctrl_dhcom_i>;
- pinctrl-names = "default";
- };
- };
-
- panel {
- backlight = <&display_bl>;
- compatible = "edt,etm0700g0edh6";
-
- port {
- lcd_panel_in: endpoint {
- remote-endpoint = <&lcd_display_out>;
- };
- };
- };
-
- sound {
- audio-codec = <&sgtl5000>;
- audio-routing =
- "MIC_IN", "Mic Jack",
- "Mic Jack", "Mic Bias",
- "LINE_IN", "Line In Jack",
- "Headphone Jack", "HP_OUT";
- compatible = "fsl,imx-audio-sgtl5000";
- model = "imx-sgtl5000";
- mux-ext-port = <3>;
- mux-int-port = <1>;
- ssi-controller = <&ssi1>;
- };
-};
-
-&audmux {
- pinctrl-0 = <&pinctrl_audmux_ext>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&can1 {
- status = "okay";
-};
-
-&can2 {
- status = "disabled";
-};
-
-/* 1G ethernet */
-/delete-node/ &ethphy0;
-&fec {
- phy-mode = "rgmii";
- phy-handle = <&ethphy7>;
- pinctrl-0 = <&pinctrl_enet_1G>;
- pinctrl-names = "default";
- status = "okay";
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
-
- ethphy7: ethernet-phy@7 { /* KSZ 9021 */
- compatible = "ethernet-phy-ieee802.3-c22";
- interrupt-parent = <&gpio1>;
- interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
- pinctrl-0 = <&pinctrl_ethphy7>;
- pinctrl-names = "default";
- reg = <7>;
- reset-assert-us = <1000>;
- reset-deassert-us = <1000>;
- reset-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
- rxc-skew-ps = <3000>;
- rxd0-skew-ps = <0>;
- rxd1-skew-ps = <0>;
- rxd2-skew-ps = <0>;
- rxd3-skew-ps = <0>;
- rxdv-skew-ps = <0>;
- txc-skew-ps = <3000>;
- txd0-skew-ps = <0>;
- txd1-skew-ps = <0>;
- txd2-skew-ps = <0>;
- txd3-skew-ps = <0>;
- txen-skew-ps = <0>;
- };
- };
-};
-
-&hdmi {
- ddc-i2c-bus = <&i2c2>;
- status = "okay";
-};
-
-&i2c2 {
- sgtl5000: codec@a {
- #sound-dai-cells = <0>;
- clocks = <&clk_ext_audio_codec>;
- compatible = "fsl,sgtl5000";
- reg = <0x0a>;
- VDDA-supply = <&reg_3p3v>;
- VDDIO-supply = <&sw2_reg>;
- };
-
- touchscreen@38 {
- compatible = "edt,edt-ft5406";
- interrupt-parent = <&gpio4>;
- interrupts = <5 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */
- pinctrl-0 = <&pinctrl_dhcom_e>;
- pinctrl-names = "default";
- reg = <0x38>;
- };
-};
-
-&ipu1_di0_disp0 {
- remote-endpoint = <&lcd_display_in>;
-};
-
-&pcie {
- pinctrl-0 = <&pinctrl_pcie &pinctrl_dhcom_j>;
- reset-gpio = <&gpio6 14 GPIO_ACTIVE_LOW>; /* GPIO J */
- status = "okay";
-};
-
-&pwm1 {
- pinctrl-0 = <&pinctrl_pwm1>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&ssi1 {
- status = "okay";
+ model = "DH electronics i.MX6Q DHCOM on Premium Developer Kit (2)";
+ compatible = "dh,imx6q-dhcom-pdk2", "dh,imx6q-dhcom-som",
+ "fsl,imx6q";
};
&sata {
status = "okay";
};
-
-&usdhc3 { /* Micro SD card on module */
- status = "okay";
-};
-
-&iomuxc {
- pinctrl-0 = <
- /*
- * The following DHCOM GPIOs are used on this board.
- * Therefore, they have been removed from the list below.
- * A: key TA1
- * B: key TA2
- * C: key TA3
- * D: key TA4
- * E: touchscreen
- * F: led6
- * G: backlight enable
- * H: led7
- * I: led8
- * J: PCIe reset
- */
- &pinctrl_hog_base
- &pinctrl_dhcom_k &pinctrl_dhcom_l
- &pinctrl_dhcom_m &pinctrl_dhcom_n &pinctrl_dhcom_o
- &pinctrl_dhcom_p &pinctrl_dhcom_q &pinctrl_dhcom_r
- &pinctrl_dhcom_s &pinctrl_dhcom_t &pinctrl_dhcom_u
- &pinctrl_dhcom_v &pinctrl_dhcom_w &pinctrl_dhcom_int
- >;
- pinctrl-names = "default";
-
- pinctrl_audmux_ext: audmux-ext-grp {
- fsl,pins = <
- MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0
- MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0
- MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
- MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0
- >;
- };
-
- pinctrl_enet_1G: enet-1G-grp {
- fsl,pins = <
- MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0
- MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0
- MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0
- MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
- MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
- MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
- MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
- MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
- MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
- MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0
- MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0
- MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0
- MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0
- MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0
- MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0
- >;
- };
-
- pinctrl_ethphy7: ethphy7-grp {
- fsl,pins = <
- MX6QDL_PAD_EIM_D26__GPIO3_IO26 0xb1 /* WOL */
- MX6QDL_PAD_EIM_D29__GPIO3_IO29 0xb0 /* Reset */
- MX6QDL_PAD_GPIO_0__GPIO1_IO00 0xb1 /* Int */
- >;
- };
-
- pinctrl_ipu1_lcdif: ipu1-lcdif-grp {
- fsl,pins = <
- MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x38
- MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x38
- MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x38
- MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x38
- MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x38
- MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x38
- MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x38
- MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x38
- MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x38
- MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x38
- MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x38
- MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x38
- MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x38
- MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x38
- MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x38
- MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x38
- MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x38
- MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x38
- MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x38
- MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x38
- MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x38
- MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x38
- MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x38
- MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x38
- MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x38
- MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x38
- MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x38
- MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x38
- >;
- };
-
- pinctrl_pwm1: pwm1-grp {
- fsl,pins = <
- MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
- >;
- };
-};