diff options
Diffstat (limited to 'arch/arm/boot/dts/rk3066a-rayeager.dts')
| -rw-r--r-- | arch/arm/boot/dts/rk3066a-rayeager.dts | 468 |
1 files changed, 468 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/rk3066a-rayeager.dts b/arch/arm/boot/dts/rk3066a-rayeager.dts new file mode 100644 index 000000000000..3ac151102c2f --- /dev/null +++ b/arch/arm/boot/dts/rk3066a-rayeager.dts @@ -0,0 +1,468 @@ +/* + * Copyright (c) 2014, 2015 FUKAUMI Naoki <naobsd@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "rk3066a.dtsi" + +/ { + model = "Rayeager PX2"; + compatible = "chipspark,rayeager-px2", "rockchip,rk3066a"; + + memory { + reg = <0x60000000 0x40000000>; + }; + + ir: ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio6 1 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ir_int>; + }; + + keys: gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + button@0 { + gpio-key,wakeup = <1>; + gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; + label = "GPIO Power"; + linux,code = <116>; + pinctrl-names = "default"; + pinctrl-0 = <&pwr_key>; + }; + }; + + vsys: vsys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vsys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + /* input for 5V_STDBY is VSYS or DC5V, selectable by jumper J4 */ + vcc_stdby: 5v-stdby-regulator { + compatible = "regulator-fixed"; + regulator-name = "5v_stdby"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + vcc_emmc: emmc-regulator { + compatible = "regulator-fixed"; + regulator-name = "emmc_vccq"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + vin-supply = <&vsys>; + }; + + vcc_sata: sata-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 22 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&sata_pwr>; + regulator-name = "usb_5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + vin-supply = <&vcc_stdby>; + }; + + vcc_sd: sdmmc-regulator { + compatible = "regulator-fixed"; + gpio = <&gpio3 7 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_pwr>; + regulator-name = "vcc_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + vin-supply = <&vcc_io>; + }; + + vcc_host: usb-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&host_drv>; + regulator-name = "host-pwr"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + vin-supply = <&vcc_stdby>; + }; + + vcc_otg: usb-otg-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&otg_drv>; + regulator-name = "vcc_otg"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + vin-supply = <&vcc_stdby>; + }; +}; + +&cpu0 { + cpu0-supply = <&vdd_arm>; +}; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&rmii_rst>; + phy = <&phy0>; + phy-supply = <&vcc_rmii>; + status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; +}; + +&emmc { + broken-cd; + bus-width = <8>; + cap-mmc-highspeed; + disable-wp; + non-removable; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_rst>; + vmmc-supply = <&vcc_emmc>; + vqmmc-supply = <&vcc_emmc>; + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + status = "okay"; + + ak8963: ak8963@0d { + compatible = "asahi-kasei,ak8975"; + reg = <0x0d>; + interrupt-parent = <&gpio4>; + interrupts = <17 IRQ_TYPE_EDGE_RISING>; + pinctrl-names = "default"; + pinctrl-0 = <&comp_int>; + }; + + mma8452: mma8452@1d { + compatible = "fsl,mma8452"; + reg = <0x1d>; + interrupt-parent = <&gpio4>; + interrupts = <16 IRQ_TYPE_EDGE_RISING>; + pinctrl-names = "default"; + pinctrl-0 = <&gsensor_int>; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + status = "okay"; + + tps: tps@2d { + reg = <0x2d>; + interrupt-parent = <&gpio6>; + interrupts = <4 IRQ_TYPE_EDGE_RISING>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int>, <&pwr_hold>; + + vcc1-supply = <&vsys>; + vcc2-supply = <&vsys>; + vcc3-supply = <&vsys>; + vcc4-supply = <&vsys>; + vcc5-supply = <&vcc_io>; + vcc6-supply = <&vcc_io>; + vcc7-supply = <&vsys>; + vccio-supply = <&vsys>; + + regulators { + vcc_rtc: regulator@0 { + regulator-name = "vcc_rtc"; + regulator-always-on; + }; + + vcc_io: regulator@1 { + regulator-name = "vcc_io"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_arm: regulator@2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + vcc_ddr: regulator@3 { + regulator-name = "vcc_ddr"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + vcc18: regulator@5 { + regulator-name = "vcc18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vdd_11: regulator@6 { + regulator-name = "vdd_11"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + vcc_25: regulator@7 { + regulator-name = "vcc_25"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + vccio_wl: regulator@8 { + regulator-name = "vccio_wl"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vcc25_hdmi: regulator@9 { + regulator-name = "vcc25_hdmi"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + + vcca_33: regulator@10 { + regulator-name = "vcca_33"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vcc_rmii: regulator@11 { + regulator-name = "vcc_rmii"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vcc28_cif: regulator@12 { + regulator-name = "vcc28_cif"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + }; + }; +}; + +#include "tps65910.dtsi" + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&mmc0 { + bus-width = <4>; + disable-wp; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>; + vmmc-supply = <&vcc_sd>; + status = "okay"; +}; + +&mmc1 { + broken-cd; + bus-width = <4>; + disable-wp; + non-removable; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, <&sd1_bus4>; + vmmc-supply = <&vccio_wl>; + status = "okay"; +}; + +&pinctrl { + pcfg_output_high: pcfg-output-high { + output-high; + }; + + ak8963 { + comp_int: comp-int { + rockchip,pins = <4 17 RK_FUNC_GPIO &pcfg_pull_default>; + }; + }; + + emac { + rmii_rst: rmii-rst { + rockchip,pins = <1 30 RK_FUNC_GPIO &pcfg_output_high>; + }; + }; + + ir { + ir_int: ir-int { + rockchip,pins = <6 1 RK_FUNC_GPIO &pcfg_pull_default>; + }; + }; + + keys { + pwr_key: pwr-key { + rockchip,pins = <6 2 RK_FUNC_GPIO &pcfg_pull_default>; + }; + }; + + mma8452 { + gsensor_int: gsensor-int { + rockchip,pins = <4 16 RK_FUNC_GPIO &pcfg_pull_default>; + }; + }; + + mmc { + sdmmc_pwr: sdmmc-pwr { + rockchip,pins = <3 7 RK_FUNC_GPIO &pcfg_pull_default>; + }; + }; + + usb_host { + host_drv: host-drv { + rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_default>; + }; + + hub_rst: hub-rst { + rockchip,pins = <1 31 RK_FUNC_GPIO &pcfg_output_high>; + }; + + sata_pwr: sata-pwr { + rockchip,pins = <4 22 RK_FUNC_GPIO &pcfg_pull_default>; + }; + + sata_reset: sata-reset { + rockchip,pins = <0 13 RK_FUNC_GPIO &pcfg_output_high>; + }; + }; + + usb_otg { + otg_drv: otg-drv { + rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_default>; + }; + }; + + tps { + pmic_int: pmic-int { + rockchip,pins = <6 4 RK_FUNC_GPIO &pcfg_pull_default>; + }; + + pwr_hold: pwr-hold { + rockchip,pins = <6 8 RK_FUNC_GPIO &pcfg_output_high>; + }; + }; +}; + +&pwm1 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&saradc { + vref-supply = <&vcc_25>; + status = "okay"; +}; + +&spi0 { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer>, <&uart0_cts>, <&uart0_rts>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_xfer>, <&uart3_cts>, <&uart3_rts>; + status = "okay"; +}; + +&usb_host { + pinctrl-names = "default"; + pinctrl-0 = <&hub_rst>, <&sata_reset>; + status = "okay"; +}; + +&usb_otg { + status = "okay"; +}; + +&wdt { + status = "okay"; +}; |