diff options
Diffstat (limited to 'arch/arm/mach-kirkwood')
| -rw-r--r-- | arch/arm/mach-kirkwood/Kconfig | 21 | ||||
| -rw-r--r-- | arch/arm/mach-kirkwood/Makefile | 3 | ||||
| -rw-r--r-- | arch/arm/mach-kirkwood/addr-map.c | 3 | ||||
| -rw-r--r-- | arch/arm/mach-kirkwood/board-dnskw.c | 35 | ||||
| -rw-r--r-- | arch/arm/mach-kirkwood/board-dockstar.c | 61 | ||||
| -rw-r--r-- | arch/arm/mach-kirkwood/board-dt.c | 16 | ||||
| -rw-r--r-- | arch/arm/mach-kirkwood/board-iconnect.c | 48 | ||||
| -rw-r--r-- | arch/arm/mach-kirkwood/board-iomega_ix2_200.c | 57 | ||||
| -rw-r--r-- | arch/arm/mach-kirkwood/board-km_kirkwood.c | 57 | ||||
| -rw-r--r-- | arch/arm/mach-kirkwood/common.c | 12 | ||||
| -rw-r--r-- | arch/arm/mach-kirkwood/common.h | 18 | ||||
| -rw-r--r-- | arch/arm/mach-kirkwood/include/mach/bridge-regs.h | 20 | ||||
| -rw-r--r-- | arch/arm/mach-kirkwood/include/mach/kirkwood.h | 112 | ||||
| -rw-r--r-- | arch/arm/mach-kirkwood/irq.c | 9 | ||||
| -rw-r--r-- | arch/arm/mach-kirkwood/pcie.c | 12 | ||||
| -rw-r--r-- | arch/arm/mach-kirkwood/ts41x-setup.c | 3 |
16 files changed, 316 insertions, 171 deletions
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index ca5c15a4e626..50bca5032b7e 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -94,6 +94,13 @@ config MACH_TS219_DT or MV6282. If you have the wrong one, the buttons will not work. +config MACH_DOCKSTAR_DT + bool "Seagate FreeAgent Dockstar (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the + Seagate FreeAgent Dockstar (Flattened Device Tree). + config MACH_GOFLEXNET_DT bool "Seagate GoFlex Net (Flattened Device Tree)" select ARCH_KIRKWOOD_DT @@ -109,6 +116,20 @@ config MACH_LSXL_DT Buffalo Linkstation LS-XHL & LS-CHLv2 devices, using Flattened Device Tree. +config MACH_IOMEGA_IX2_200_DT + bool "Iomega StorCenter ix2-200 (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the + Iomega StorCenter ix2-200 (Flattened Device Tree). + +config MACH_KM_KIRKWOOD_DT + bool "Keymile Kirkwood Reference Design (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the + Keymile Kirkwood Reference Desgin, using Flattened Device Tree. + config MACH_TS219 bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS" help diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile index 055c85a1cc46..294779f892d9 100644 --- a/arch/arm/mach-kirkwood/Makefile +++ b/arch/arm/mach-kirkwood/Makefile @@ -26,5 +26,8 @@ obj-$(CONFIG_MACH_ICONNECT_DT) += board-iconnect.o obj-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += board-dnskw.o obj-$(CONFIG_MACH_IB62X0_DT) += board-ib62x0.o obj-$(CONFIG_MACH_TS219_DT) += board-ts219.o tsx1x-common.o +obj-$(CONFIG_MACH_DOCKSTAR_DT) += board-dockstar.o obj-$(CONFIG_MACH_GOFLEXNET_DT) += board-goflexnet.o obj-$(CONFIG_MACH_LSXL_DT) += board-lsxl.o +obj-$(CONFIG_MACH_IOMEGA_IX2_200_DT) += board-iomega_ix2_200.o +obj-$(CONFIG_MACH_KM_KIRKWOOD_DT) += board-km_kirkwood.o diff --git a/arch/arm/mach-kirkwood/addr-map.c b/arch/arm/mach-kirkwood/addr-map.c index e9a7180863d9..8f0d162a1e1d 100644 --- a/arch/arm/mach-kirkwood/addr-map.c +++ b/arch/arm/mach-kirkwood/addr-map.c @@ -86,5 +86,6 @@ void __init kirkwood_setup_cpu_mbus(void) /* * Setup MBUS dram target info. */ - orion_setup_cpu_mbus_target(&addr_map_cfg, DDR_WINDOW_CPU_BASE); + orion_setup_cpu_mbus_target(&addr_map_cfg, + (void __iomem *) DDR_WINDOW_CPU_BASE); } diff --git a/arch/arm/mach-kirkwood/board-dnskw.c b/arch/arm/mach-kirkwood/board-dnskw.c index 4ab35065a144..43d16d6714b8 100644 --- a/arch/arm/mach-kirkwood/board-dnskw.c +++ b/arch/arm/mach-kirkwood/board-dnskw.c @@ -14,18 +14,8 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/ata_platform.h> #include <linux/mv643xx_eth.h> -#include <linux/of.h> #include <linux/gpio.h> -#include <linux/input.h> -#include <linux/gpio-fan.h> -#include <linux/leds.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <mach/kirkwood.h> -#include <mach/bridge-regs.h> #include "common.h" #include "mpp.h" @@ -67,29 +57,6 @@ static unsigned int dnskw_mpp_config[] __initdata = { 0 }; -/* Fan: ADDA AD045HB-G73 40mm 6000rpm@5v */ -static struct gpio_fan_speed dnskw_fan_speed[] = { - { 0, 0 }, - { 3000, 1 }, - { 6000, 2 }, -}; -static unsigned dnskw_fan_pins[] = {46, 45}; - -static struct gpio_fan_platform_data dnskw_fan_data = { - .num_ctrl = ARRAY_SIZE(dnskw_fan_pins), - .ctrl = dnskw_fan_pins, - .num_speed = ARRAY_SIZE(dnskw_fan_speed), - .speed = dnskw_fan_speed, -}; - -static struct platform_device dnskw_fan_device = { - .name = "gpio-fan", - .id = -1, - .dev = { - .platform_data = &dnskw_fan_data, - }, -}; - static void dnskw_power_off(void) { gpio_set_value(36, 1); @@ -114,8 +81,6 @@ void __init dnskw_init(void) kirkwood_ehci_init(); kirkwood_ge00_init(&dnskw_ge00_data); - platform_device_register(&dnskw_fan_device); - /* Register power-off GPIO. */ if (gpio_request(36, "dnskw:power:off") == 0 && gpio_direction_output(36, 0) == 0) diff --git a/arch/arm/mach-kirkwood/board-dockstar.c b/arch/arm/mach-kirkwood/board-dockstar.c new file mode 100644 index 000000000000..f2fbb023e679 --- /dev/null +++ b/arch/arm/mach-kirkwood/board-dockstar.c @@ -0,0 +1,61 @@ +/* + * arch/arm/mach-kirkwood/board-dockstar.c + * + * Seagate FreeAgent Dockstar Board Init for drivers not converted to + * flattened device tree yet. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * Copied and modified for Seagate GoFlex Net support by + * Joshua Coombs <josh.coombs@gmail.com> based on ArchLinux ARM's + * GoFlex kernel patches. + * + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/ata_platform.h> +#include <linux/mv643xx_eth.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_fdt.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <linux/gpio.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <mach/kirkwood.h> +#include <mach/bridge-regs.h> +#include <linux/platform_data/mmc-mvsdio.h> +#include "common.h" +#include "mpp.h" + +static struct mv643xx_eth_platform_data dockstar_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; + +static unsigned int dockstar_mpp_config[] __initdata = { + MPP29_GPIO, /* USB Power Enable */ + MPP46_GPIO, /* LED green */ + MPP47_GPIO, /* LED orange */ + 0 +}; + +void __init dockstar_dt_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_mpp_conf(dockstar_mpp_config); + + if (gpio_request(29, "USB Power Enable") != 0 || + gpio_direction_output(29, 1) != 0) + pr_err("can't setup GPIO 29 (USB Power Enable)\n"); + kirkwood_ehci_init(); + + kirkwood_ge00_init(&dockstar_ge00_data); +} diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index e4eb450de301..d94872fed8c0 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -33,6 +33,7 @@ struct of_dev_auxdata kirkwood_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("marvell,orion-wdt", 0xf1020300, "orion_wdt", NULL), OF_DEV_AUXDATA("marvell,orion-sata", 0xf1080000, "sata_mv.0", NULL), OF_DEV_AUXDATA("marvell,orion-nand", 0xf4000000, "orion_nand", NULL), + OF_DEV_AUXDATA("marvell,orion-crypto", 0xf1030000, "mv_crypto", NULL), {}, }; @@ -50,9 +51,7 @@ static void __init kirkwood_dt_init(void) kirkwood_setup_cpu_mbus(); -#ifdef CONFIG_CACHE_FEROCEON_L2 kirkwood_l2_init(); -#endif /* Setup root of clk tree */ kirkwood_clk_init(); @@ -60,7 +59,6 @@ static void __init kirkwood_dt_init(void) /* internal devices that every board has */ kirkwood_xor0_init(); kirkwood_xor1_init(); - kirkwood_crypto_init(); #ifdef CONFIG_KEXEC kexec_reinit = kirkwood_enable_pcie; @@ -81,12 +79,21 @@ static void __init kirkwood_dt_init(void) if (of_machine_is_compatible("qnap,ts219")) qnap_dt_ts219_init(); + if (of_machine_is_compatible("seagate,dockstar")) + dockstar_dt_init(); + if (of_machine_is_compatible("seagate,goflexnet")) goflexnet_init(); if (of_machine_is_compatible("buffalo,lsxl")) lsxl_init(); + if (of_machine_is_compatible("iom,ix2-200")) + iomega_ix2_200_init(); + + if (of_machine_is_compatible("keymile,km_kirkwood")) + km_kirkwood_init(); + of_platform_populate(NULL, kirkwood_dt_match_table, kirkwood_auxdata_lookup, NULL); } @@ -98,8 +105,11 @@ static const char *kirkwood_dt_board_compat[] = { "iom,iconnect", "raidsonic,ib-nas62x0", "qnap,ts219", + "seagate,dockstar", "seagate,goflexnet", "buffalo,lsxl", + "iom,ix2-200", + "keymile,km_kirkwood", NULL }; diff --git a/arch/arm/mach-kirkwood/board-iconnect.c b/arch/arm/mach-kirkwood/board-iconnect.c index d7a9198ed300..d084b1e2943a 100644 --- a/arch/arm/mach-kirkwood/board-iconnect.c +++ b/arch/arm/mach-kirkwood/board-iconnect.c @@ -16,11 +16,8 @@ #include <linux/of_fdt.h> #include <linux/of_irq.h> #include <linux/of_platform.h> -#include <linux/mtd/partitions.h> #include <linux/mv643xx_eth.h> #include <linux/gpio.h> -#include <linux/input.h> -#include <linux/gpio_keys.h> #include <asm/mach/arch.h> #include <mach/kirkwood.h> #include "common.h" @@ -44,57 +41,12 @@ static unsigned int iconnect_mpp_config[] __initdata = { 0 }; -static struct mtd_partition iconnect_nand_parts[] = { - { - .name = "flash", - .offset = 0, - .size = MTDPART_SIZ_FULL, - }, -}; - -/* yikes... theses are the original input buttons */ -/* but I'm not convinced by the sw event choices */ -static struct gpio_keys_button iconnect_buttons[] = { - { - .type = EV_SW, - .code = SW_LID, - .gpio = 12, - .desc = "Reset Button", - .active_low = 1, - .debounce_interval = 100, - }, { - .type = EV_SW, - .code = SW_TABLET_MODE, - .gpio = 35, - .desc = "OTB Button", - .active_low = 1, - .debounce_interval = 100, - }, -}; - -static struct gpio_keys_platform_data iconnect_button_data = { - .buttons = iconnect_buttons, - .nbuttons = ARRAY_SIZE(iconnect_buttons), -}; - -static struct platform_device iconnect_button_device = { - .name = "gpio-keys", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &iconnect_button_data, - }, -}; - void __init iconnect_init(void) { kirkwood_mpp_conf(iconnect_mpp_config); - kirkwood_nand_init(ARRAY_AND_SIZE(iconnect_nand_parts), 25); kirkwood_ehci_init(); kirkwood_ge00_init(&iconnect_ge00_data); - - platform_device_register(&iconnect_button_device); } static int __init iconnect_pci_init(void) diff --git a/arch/arm/mach-kirkwood/board-iomega_ix2_200.c b/arch/arm/mach-kirkwood/board-iomega_ix2_200.c new file mode 100644 index 000000000000..158fb97d0397 --- /dev/null +++ b/arch/arm/mach-kirkwood/board-iomega_ix2_200.c @@ -0,0 +1,57 @@ +/* + * arch/arm/mach-kirkwood/board-iomega_ix2_200.c + * + * Iomega StorCenter ix2-200 + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mv643xx_eth.h> +#include <linux/ethtool.h> +#include <mach/kirkwood.h> +#include "common.h" +#include "mpp.h" + +static struct mv643xx_eth_platform_data iomega_ix2_200_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_NONE, + .speed = SPEED_1000, + .duplex = DUPLEX_FULL, +}; + +static unsigned int iomega_ix2_200_mpp_config[] __initdata = { + MPP12_GPIO, /* Reset Button */ + MPP14_GPIO, /* Power Button */ + MPP15_GPIO, /* Backup LED (blue) */ + MPP16_GPIO, /* Power LED (white) */ + MPP35_GPIO, /* OTB Button */ + MPP36_GPIO, /* Rebuild LED (white) */ + MPP37_GPIO, /* Health LED (red) */ + MPP38_GPIO, /* SATA LED brightness control 1 */ + MPP39_GPIO, /* SATA LED brightness control 2 */ + MPP40_GPIO, /* Backup LED brightness control 1 */ + MPP41_GPIO, /* Backup LED brightness control 2 */ + MPP42_GPIO, /* Power LED brightness control 1 */ + MPP43_GPIO, /* Power LED brightness control 2 */ + MPP44_GPIO, /* Health LED brightness control 1 */ + MPP45_GPIO, /* Health LED brightness control 2 */ + MPP46_GPIO, /* Rebuild LED brightness control 1 */ + MPP47_GPIO, /* Rebuild LED brightness control 2 */ + 0 +}; + +void __init iomega_ix2_200_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_mpp_conf(iomega_ix2_200_mpp_config); + + kirkwood_ehci_init(); + + kirkwood_ge01_init(&iomega_ix2_200_ge00_data); +} diff --git a/arch/arm/mach-kirkwood/board-km_kirkwood.c b/arch/arm/mach-kirkwood/board-km_kirkwood.c new file mode 100644 index 000000000000..f7d32834b757 --- /dev/null +++ b/arch/arm/mach-kirkwood/board-km_kirkwood.c @@ -0,0 +1,57 @@ +/* + * Copyright 2012 2012 KEYMILE AG, CH-3097 Bern + * Valentin Longchamp <valentin.longchamp@keymile.com> + * + * arch/arm/mach-kirkwood/board-km_kirkwood.c + * + * Keymile km_kirkwood Reference Desing Init for drivers not converted to + * flattened device tree yet. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/mv643xx_eth.h> +#include <linux/clk.h> +#include <linux/clk-private.h> +#include "common.h" +#include "mpp.h" + +static struct mv643xx_eth_platform_data km_kirkwood_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; + +static unsigned int km_kirkwood_mpp_config[] __initdata = { + MPP8_GPIO, /* I2C SDA */ + MPP9_GPIO, /* I2C SCL */ + 0 +}; + +void __init km_kirkwood_init(void) +{ + struct clk *sata_clk; + /* + * Basic setup. Needs to be called early. + */ + kirkwood_mpp_conf(km_kirkwood_mpp_config); + + /* + * Our variant of kirkwood (integrated in the Bobcat) hangs on accessing + * SATA bits (14-15) of the Clock Gating Control Register. Since these + * devices are also not present in this variant, their clocks get + * disabled because unused when clk_disable_unused() gets called. + * That's why we change the flags to these clocks to CLK_IGNORE_UNUSED + */ + sata_clk = clk_get_sys("sata_mv.0", "0"); + if (!IS_ERR(sata_clk)) + sata_clk->flags |= CLK_IGNORE_UNUSED; + sata_clk = clk_get_sys("sata_mv.0", "1"); + if (!IS_ERR(sata_clk)) + sata_clk->flags |= CLK_IGNORE_UNUSED; + + kirkwood_ehci_init(); + kirkwood_ge00_init(&km_kirkwood_ge00_data); +} diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index 5c38c94b79a2..2c6c218fb79e 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -42,7 +42,7 @@ ****************************************************************************/ static struct map_desc kirkwood_io_desc[] __initdata = { { - .virtual = KIRKWOOD_REGS_VIRT_BASE, + .virtual = (unsigned long) KIRKWOOD_REGS_VIRT_BASE, .pfn = __phys_to_pfn(KIRKWOOD_REGS_PHYS_BASE), .length = KIRKWOOD_REGS_SIZE, .type = MT_DEVICE, @@ -205,8 +205,7 @@ static struct clk *tclk; static struct clk __init *kirkwood_register_gate(const char *name, u8 bit_idx) { - return clk_register_gate(NULL, name, "tclk", 0, - (void __iomem *)CLOCK_GATING_CTRL, + return clk_register_gate(NULL, name, "tclk", 0, CLOCK_GATING_CTRL, bit_idx, 0, &gating_lock); } @@ -215,8 +214,7 @@ static struct clk __init *kirkwood_register_gate_fn(const char *name, void (*fn_en)(void), void (*fn_dis)(void)) { - return clk_register_gate_fn(NULL, name, "tclk", 0, - (void __iomem *)CLOCK_GATING_CTRL, + return clk_register_gate_fn(NULL, name, "tclk", 0, CLOCK_GATING_CTRL, bit_idx, 0, &gating_lock, fn_en, fn_dis); } @@ -635,6 +633,7 @@ char * __init kirkwood_id(void) void __init kirkwood_l2_init(void) { +#ifdef CONFIG_CACHE_FEROCEON_L2 #ifdef CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH writel(readl(L2_CONFIG_REG) | L2_WRITETHROUGH, L2_CONFIG_REG); feroceon_l2_init(1); @@ -642,6 +641,7 @@ void __init kirkwood_l2_init(void) writel(readl(L2_CONFIG_REG) & ~L2_WRITETHROUGH, L2_CONFIG_REG); feroceon_l2_init(0); #endif +#endif } void __init kirkwood_init(void) @@ -659,9 +659,7 @@ void __init kirkwood_init(void) kirkwood_setup_cpu_mbus(); -#ifdef CONFIG_CACHE_FEROCEON_L2 kirkwood_l2_init(); -#endif /* Setup root of clk tree */ kirkwood_clk_init(); diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h index 304dd1abfdca..bcffd7ca1ca2 100644 --- a/arch/arm/mach-kirkwood/common.h +++ b/arch/arm/mach-kirkwood/common.h @@ -82,6 +82,12 @@ void ib62x0_init(void); static inline void ib62x0_init(void) {}; #endif +#ifdef CONFIG_MACH_DOCKSTAR_DT +void dockstar_dt_init(void); +#else +static inline void dockstar_dt_init(void) {}; +#endif + #ifdef CONFIG_MACH_GOFLEXNET_DT void goflexnet_init(void); #else @@ -94,6 +100,18 @@ void lsxl_init(void); static inline void lsxl_init(void) {}; #endif +#ifdef CONFIG_MACH_IOMEGA_IX2_200_DT +void iomega_ix2_200_init(void); +#else +static inline void iomega_ix2_200_init(void) {}; +#endif + +#ifdef CONFIG_MACH_KM_KIRKWOOD_DT +void km_kirkwood_init(void); +#else +static inline void km_kirkwood_init(void) {}; +#endif + /* early init functions not converted to fdt yet */ char *kirkwood_id(void); void kirkwood_l2_init(void); diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h index a115142f8690..5c82b7dce4e2 100644 --- a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h +++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h @@ -13,37 +13,37 @@ #include <mach/kirkwood.h> -#define CPU_CONFIG (BRIDGE_VIRT_BASE | 0x0100) +#define CPU_CONFIG (BRIDGE_VIRT_BASE + 0x0100) #define CPU_CONFIG_ERROR_PROP 0x00000004 -#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104) +#define CPU_CONTROL (BRIDGE_VIRT_BASE + 0x0104) #define CPU_RESET 0x00000002 -#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108) +#define RSTOUTn_MASK (BRIDGE_VIRT_BASE + 0x0108) #define WDT_RESET_OUT_EN 0x00000002 #define SOFT_RESET_OUT_EN 0x00000004 -#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c) +#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE + 0x010c) #define SOFT_RESET 0x00000001 -#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110) +#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE + 0x0110) #define WDT_INT_REQ 0x0008 #define BRIDGE_INT_TIMER1_CLR (~0x0004) -#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200) +#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE + 0x0200) #define IRQ_CAUSE_LOW_OFF 0x0000 #define IRQ_MASK_LOW_OFF 0x0004 #define IRQ_CAUSE_HIGH_OFF 0x0010 #define IRQ_MASK_HIGH_OFF 0x0014 -#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) -#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE | 0x0300) +#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE + 0x0300) +#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE + 0x0300) -#define L2_CONFIG_REG (BRIDGE_VIRT_BASE | 0x0128) +#define L2_CONFIG_REG (BRIDGE_VIRT_BASE + 0x0128) #define L2_WRITETHROUGH 0x00000010 -#define CLOCK_GATING_CTRL (BRIDGE_VIRT_BASE | 0x11c) +#define CLOCK_GATING_CTRL (BRIDGE_VIRT_BASE + 0x11c) #define CGC_BIT_GE0 (0) #define CGC_BIT_PEX0 (2) #define CGC_BIT_USB0 (3) diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h index af4f0000dcef..041653a04a9c 100644 --- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h +++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h @@ -45,7 +45,7 @@ #define KIRKWOOD_PCIE_IO_SIZE SZ_64K #define KIRKWOOD_REGS_PHYS_BASE 0xf1000000 -#define KIRKWOOD_REGS_VIRT_BASE 0xfed00000 +#define KIRKWOOD_REGS_VIRT_BASE IOMEM(0xfed00000) #define KIRKWOOD_REGS_SIZE SZ_1M #define KIRKWOOD_PCIE_MEM_PHYS_BASE 0xe0000000 @@ -59,61 +59,61 @@ /* * Register Map */ -#define DDR_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x00000) -#define DDR_WINDOW_CPU_BASE (DDR_VIRT_BASE | 0x1500) -#define DDR_OPERATION_BASE (DDR_VIRT_BASE | 0x1418) - -#define DEV_BUS_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x10000) -#define DEV_BUS_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x10000) -#define SAMPLE_AT_RESET (DEV_BUS_VIRT_BASE | 0x0030) -#define DEVICE_ID (DEV_BUS_VIRT_BASE | 0x0034) -#define GPIO_LOW_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x0100) -#define GPIO_HIGH_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x0140) -#define RTC_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x0300) -#define SPI_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x0600) -#define I2C_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x1000) -#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2000) -#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2000) -#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2100) -#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100) - -#define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x20000) -#define BRIDGE_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x20000) - -#define CRYPTO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x30000) - -#define PCIE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x40000) -#define PCIE_LINK_CTRL (PCIE_VIRT_BASE | 0x70) -#define PCIE_STATUS (PCIE_VIRT_BASE | 0x1a04) -#define PCIE1_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x44000) -#define PCIE1_LINK_CTRL (PCIE1_VIRT_BASE | 0x70) -#define PCIE1_STATUS (PCIE1_VIRT_BASE | 0x1a04) - -#define USB_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x50000) - -#define XOR0_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x60800) -#define XOR0_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x60800) -#define XOR1_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x60900) -#define XOR1_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x60900) -#define XOR0_HIGH_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x60A00) -#define XOR0_HIGH_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x60A00) -#define XOR1_HIGH_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x60B00) -#define XOR1_HIGH_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x60B00) - -#define GE00_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x70000) -#define GE01_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x74000) - -#define SATA_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x80000) -#define SATA_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x80000) -#define SATA0_IF_CTRL (SATA_VIRT_BASE | 0x2050) -#define SATA0_PHY_MODE_2 (SATA_VIRT_BASE | 0x2330) -#define SATA1_IF_CTRL (SATA_VIRT_BASE | 0x4050) -#define SATA1_PHY_MODE_2 (SATA_VIRT_BASE | 0x4330) - -#define SDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x90000) - -#define AUDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0xA0000) -#define AUDIO_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0xA0000) +#define DDR_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x00000) +#define DDR_WINDOW_CPU_BASE (DDR_VIRT_BASE + 0x1500) +#define DDR_OPERATION_BASE (DDR_VIRT_BASE + 0x1418) + +#define DEV_BUS_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x10000) +#define DEV_BUS_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x10000) +#define SAMPLE_AT_RESET (DEV_BUS_VIRT_BASE + 0x0030) +#define DEVICE_ID (DEV_BUS_VIRT_BASE + 0x0034) +#define GPIO_LOW_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x0100) +#define GPIO_HIGH_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x0140) +#define RTC_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x0300) +#define SPI_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x0600) +#define I2C_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x1000) +#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x2000) +#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x2000) +#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x2100) +#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x2100) + +#define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x20000) +#define BRIDGE_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x20000) + +#define CRYPTO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x30000) + +#define PCIE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x40000) +#define PCIE_LINK_CTRL (PCIE_VIRT_BASE + 0x70) +#define PCIE_STATUS (PCIE_VIRT_BASE + 0x1a04) +#define PCIE1_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x44000) +#define PCIE1_LINK_CTRL (PCIE1_VIRT_BASE + 0x70) +#define PCIE1_STATUS (PCIE1_VIRT_BASE + 0x1a04) + +#define USB_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x50000) + +#define XOR0_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60800) +#define XOR0_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60800) +#define XOR1_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60900) +#define XOR1_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60900) +#define XOR0_HIGH_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60A00) +#define XOR0_HIGH_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60A00) +#define XOR1_HIGH_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60B00) +#define XOR1_HIGH_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60B00) + +#define GE00_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x70000) +#define GE01_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x74000) + +#define SATA_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x80000) +#define SATA_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x80000) +#define SATA0_IF_CTRL (SATA_VIRT_BASE + 0x2050) +#define SATA0_PHY_MODE_2 (SATA_VIRT_BASE + 0x2330) +#define SATA1_IF_CTRL (SATA_VIRT_BASE + 0x4050) +#define SATA1_PHY_MODE_2 (SATA_VIRT_BASE + 0x4330) + +#define SDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x90000) + +#define AUDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0xA0000) +#define AUDIO_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0xA0000) /* * Supported devices and revisions. diff --git a/arch/arm/mach-kirkwood/irq.c b/arch/arm/mach-kirkwood/irq.c index 20149a7fd280..884703535a0a 100644 --- a/arch/arm/mach-kirkwood/irq.c +++ b/arch/arm/mach-kirkwood/irq.c @@ -10,6 +10,7 @@ #include <linux/gpio.h> #include <linux/kernel.h> #include <linux/irq.h> +#include <linux/io.h> #include <mach/bridge-regs.h> #include <plat/orion-gpio.h> #include <plat/irq.h> @@ -30,14 +31,14 @@ static int __initdata gpio1_irqs[4] = { void __init kirkwood_init_irq(void) { - orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF)); - orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF)); + orion_irq_init(0, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF); + orion_irq_init(32, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF); /* * Initialize gpiolib for GPIOs 0-49. */ - orion_gpio_init(NULL, 0, 32, (void __iomem *)GPIO_LOW_VIRT_BASE, 0, + orion_gpio_init(NULL, 0, 32, GPIO_LOW_VIRT_BASE, 0, IRQ_KIRKWOOD_GPIO_START, gpio0_irqs); - orion_gpio_init(NULL, 32, 18, (void __iomem *)GPIO_HIGH_VIRT_BASE, 0, + orion_gpio_init(NULL, 32, 18, GPIO_HIGH_VIRT_BASE, 0, IRQ_KIRKWOOD_GPIO_START + 32, gpio1_irqs); } diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c index 532d8acb38f9..ec544918b12c 100644 --- a/arch/arm/mach-kirkwood/pcie.c +++ b/arch/arm/mach-kirkwood/pcie.c @@ -47,8 +47,8 @@ void kirkwood_enable_pcie(void) void kirkwood_pcie_id(u32 *dev, u32 *rev) { kirkwood_enable_pcie(); - *dev = orion_pcie_dev_id((void __iomem *)PCIE_VIRT_BASE); - *rev = orion_pcie_rev((void __iomem *)PCIE_VIRT_BASE); + *dev = orion_pcie_dev_id(PCIE_VIRT_BASE); + *rev = orion_pcie_rev(PCIE_VIRT_BASE); } struct pcie_port { @@ -133,7 +133,7 @@ static struct pci_ops pcie_ops = { static void __init pcie0_ioresources_init(struct pcie_port *pp) { - pp->base = (void __iomem *)PCIE_VIRT_BASE; + pp->base = PCIE_VIRT_BASE; pp->irq = IRQ_KIRKWOOD_PCIE; /* @@ -147,7 +147,7 @@ static void __init pcie0_ioresources_init(struct pcie_port *pp) static void __init pcie1_ioresources_init(struct pcie_port *pp) { - pp->base = (void __iomem *)PCIE1_VIRT_BASE; + pp->base = PCIE1_VIRT_BASE; pp->irq = IRQ_KIRKWOOD_PCIE1; /* @@ -255,11 +255,11 @@ static struct hw_pci kirkwood_pci __initdata = { .map_irq = kirkwood_pcie_map_irq, }; -static void __init add_pcie_port(int index, unsigned long base) +static void __init add_pcie_port(int index, void __iomem *base) { printk(KERN_INFO "Kirkwood PCIe port %d: ", index); - if (orion_pcie_link_up((void __iomem *)base)) { + if (orion_pcie_link_up(base)) { printk(KERN_INFO "link up\n"); pcie_port_map[num_pcie_ports++] = index; } else diff --git a/arch/arm/mach-kirkwood/ts41x-setup.c b/arch/arm/mach-kirkwood/ts41x-setup.c index 5bbca2680442..367a9400f532 100644 --- a/arch/arm/mach-kirkwood/ts41x-setup.c +++ b/arch/arm/mach-kirkwood/ts41x-setup.c @@ -20,6 +20,7 @@ #include <linux/gpio.h> #include <linux/gpio_keys.h> #include <linux/input.h> +#include <linux/io.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <mach/kirkwood.h> @@ -161,7 +162,7 @@ static int __init ts41x_pci_init(void) * (Marvell 88sx7042/sata_mv) is known to stop working * after a few minutes. */ - orion_pcie_reset((void __iomem *)PCIE_VIRT_BASE); + orion_pcie_reset(PCIE_VIRT_BASE); kirkwood_pcie_id(&dev, &rev); if (dev == MV88F6282_DEV_ID) |