summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-orion5x/edmini_v2-setup.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-orion5x/edmini_v2-setup.c')
-rw-r--r--arch/arm/mach-orion5x/edmini_v2-setup.c169
1 files changed, 0 insertions, 169 deletions
diff --git a/arch/arm/mach-orion5x/edmini_v2-setup.c b/arch/arm/mach-orion5x/edmini_v2-setup.c
deleted file mode 100644
index f66c1b2ee8c1..000000000000
--- a/arch/arm/mach-orion5x/edmini_v2-setup.c
+++ /dev/null
@@ -1,169 +0,0 @@
-/*
- * arch/arm/mach-orion5x/edmini_v2-setup.c
- *
- * LaCie Ethernet Disk mini V2 Setup
- *
- * Copyright (C) 2008 Christopher Moore <moore@free.fr>
- * Copyright (C) 2008 Albert Aribaud <albert.aribaud@free.fr>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/*
- * TODO: add Orion USB device port init when kernel.org support is added.
- * TODO: add flash write support: see below.
- * TODO: add power-off support.
- * TODO: add I2C EEPROM support.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/mbus.h>
-#include <linux/mtd/physmap.h>
-#include <linux/leds.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/i2c.h>
-#include <linux/ata_platform.h>
-#include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-#include <mach/orion5x.h>
-#include "common.h"
-#include "mpp.h"
-
-/*****************************************************************************
- * EDMINI_V2 Info
- ****************************************************************************/
-
-/*
- * 512KB NOR flash Device bus boot chip select
- */
-
-#define EDMINI_V2_NOR_BOOT_BASE 0xfff80000
-#define EDMINI_V2_NOR_BOOT_SIZE SZ_512K
-
-/*****************************************************************************
- * 512KB NOR Flash on BOOT Device
- ****************************************************************************/
-
-/*
- * Currently the MTD code does not recognize the MX29LV400CBCT as a bottom
- * -type device. This could cause risks of accidentally erasing critical
- * flash sectors. We thus define a single, write-protected partition covering
- * the whole flash.
- * TODO: once the flash part TOP/BOTTOM detection issue is sorted out in the MTD
- * code, break this into at least three partitions: 'u-boot code', 'u-boot
- * environment' and 'whatever is left'.
- */
-
-static struct mtd_partition edmini_v2_partitions[] = {
- {
- .name = "Full512kb",
- .size = 0x00080000,
- .offset = 0x00000000,
- .mask_flags = MTD_WRITEABLE,
- },
-};
-
-static struct physmap_flash_data edmini_v2_nor_flash_data = {
- .width = 1,
- .parts = edmini_v2_partitions,
- .nr_parts = ARRAY_SIZE(edmini_v2_partitions),
-};
-
-static struct resource edmini_v2_nor_flash_resource = {
- .flags = IORESOURCE_MEM,
- .start = EDMINI_V2_NOR_BOOT_BASE,
- .end = EDMINI_V2_NOR_BOOT_BASE
- + EDMINI_V2_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device edmini_v2_nor_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &edmini_v2_nor_flash_data,
- },
- .num_resources = 1,
- .resource = &edmini_v2_nor_flash_resource,
-};
-
-/*****************************************************************************
- * RTC 5C372a on I2C bus
- ****************************************************************************/
-
-#define EDMINIV2_RTC_GPIO 3
-
-static struct i2c_board_info __initdata edmini_v2_i2c_rtc = {
- I2C_BOARD_INFO("rs5c372a", 0x32),
- .irq = 0,
-};
-
-/*****************************************************************************
- * General Setup
- ****************************************************************************/
-static unsigned int edminiv2_mpp_modes[] __initdata = {
- MPP0_UNUSED,
- MPP1_UNUSED,
- MPP2_UNUSED,
- MPP3_GPIO, /* RTC interrupt */
- MPP4_UNUSED,
- MPP5_UNUSED,
- MPP6_UNUSED,
- MPP7_UNUSED,
- MPP8_UNUSED,
- MPP9_UNUSED,
- MPP10_UNUSED,
- MPP11_UNUSED,
- MPP12_SATA_LED, /* SATA 0 presence */
- MPP13_SATA_LED, /* SATA 1 presence */
- MPP14_SATA_LED, /* SATA 0 active */
- MPP15_SATA_LED, /* SATA 1 active */
- /* 16: Power LED control (0 = On, 1 = Off) */
- MPP16_GPIO,
- /* 17: Power LED control select (0 = CPLD, 1 = GPIO16) */
- MPP17_GPIO,
- /* 18: Power button status (0 = Released, 1 = Pressed) */
- MPP18_GPIO,
- MPP19_UNUSED,
- 0,
-};
-
-void __init edmini_v2_init(void)
-{
- orion5x_mpp_conf(edminiv2_mpp_modes);
-
- /*
- * Configure peripherals.
- */
- orion5x_ehci0_init();
-
- mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
- ORION_MBUS_DEVBUS_BOOT_ATTR,
- EDMINI_V2_NOR_BOOT_BASE,
- EDMINI_V2_NOR_BOOT_SIZE);
- platform_device_register(&edmini_v2_nor_flash);
-
- pr_notice("edmini_v2: USB device port, flash write and power-off "
- "are not yet supported.\n");
-
- /* Get RTC IRQ and register the chip */
- if (gpio_request(EDMINIV2_RTC_GPIO, "rtc") == 0) {
- if (gpio_direction_input(EDMINIV2_RTC_GPIO) == 0)
- edmini_v2_i2c_rtc.irq = gpio_to_irq(EDMINIV2_RTC_GPIO);
- else
- gpio_free(EDMINIV2_RTC_GPIO);
- }
-
- if (edmini_v2_i2c_rtc.irq == 0)
- pr_warning("edmini_v2: failed to get RTC IRQ\n");
-
- i2c_register_board_info(0, &edmini_v2_i2c_rtc, 1);
-}