diff options
Diffstat (limited to 'arch/arm/mach-orion5x')
| -rw-r--r-- | arch/arm/mach-orion5x/Kconfig | 49 | ||||
| -rw-r--r-- | arch/arm/mach-orion5x/Makefile | 7 | ||||
| -rw-r--r-- | arch/arm/mach-orion5x/Makefile.boot | 3 | ||||
| -rw-r--r-- | arch/arm/mach-orion5x/addr-map.c | 240 | ||||
| -rw-r--r-- | arch/arm/mach-orion5x/common.c | 391 | ||||
| -rw-r--r-- | arch/arm/mach-orion5x/common.h | 72 | ||||
| -rw-r--r-- | arch/arm/mach-orion5x/db88f5281-setup.c | 361 | ||||
| -rw-r--r-- | arch/arm/mach-orion5x/dns323-setup.c | 320 | ||||
| -rw-r--r-- | arch/arm/mach-orion5x/gpio.c | 226 | ||||
| -rw-r--r-- | arch/arm/mach-orion5x/irq.c | 211 | ||||
| -rw-r--r-- | arch/arm/mach-orion5x/kurobox_pro-setup.c | 256 | ||||
| -rw-r--r-- | arch/arm/mach-orion5x/pci.c | 559 | ||||
| -rw-r--r-- | arch/arm/mach-orion5x/rd88f5182-setup.c | 312 | ||||
| -rw-r--r-- | arch/arm/mach-orion5x/ts209-setup.c | 442 |
14 files changed, 3449 insertions, 0 deletions
diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig new file mode 100644 index 000000000000..93debf336155 --- /dev/null +++ b/arch/arm/mach-orion5x/Kconfig @@ -0,0 +1,49 @@ +if ARCH_ORION5X + +menu "Orion Implementations" + +config MACH_DB88F5281 + bool "Marvell Orion-2 Development Board" + select I2C_BOARDINFO + help + Say 'Y' here if you want your kernel to support the + Marvell Orion-2 (88F5281) Development Board + +config MACH_RD88F5182 + bool "Marvell Orion-NAS Reference Design" + select I2C_BOARDINFO + help + Say 'Y' here if you want your kernel to support the + Marvell Orion-NAS (88F5182) RD2 + +config MACH_KUROBOX_PRO + bool "KuroBox Pro" + select I2C_BOARDINFO + help + Say 'Y' here if you want your kernel to support the + KuroBox Pro platform. + +config MACH_DNS323 + bool "D-Link DNS-323" + select I2C_BOARDINFO + help + Say 'Y' here if you want your kernel to support the + D-Link DNS-323 platform. + +config MACH_TS209 + bool "QNAP TS-109/TS-209" + help + Say 'Y' here if you want your kernel to support the + QNAP TS-109/TS-209 platform. + +config MACH_LINKSTATION_PRO + bool "Buffalo Linkstation Pro/Live" + select I2C_BOARDINFO + help + Say 'Y' here if you want your kernel to support the + Buffalo Linkstation Pro/Live platform. Both v1 and + v2 devices are supported. + +endmenu + +endif diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile new file mode 100644 index 000000000000..9301bf55910b --- /dev/null +++ b/arch/arm/mach-orion5x/Makefile @@ -0,0 +1,7 @@ +obj-y += common.o addr-map.o pci.o gpio.o irq.o +obj-$(CONFIG_MACH_DB88F5281) += db88f5281-setup.o +obj-$(CONFIG_MACH_RD88F5182) += rd88f5182-setup.o +obj-$(CONFIG_MACH_KUROBOX_PRO) += kurobox_pro-setup.o +obj-$(CONFIG_MACH_LINKSTATION_PRO) += kurobox_pro-setup.o +obj-$(CONFIG_MACH_DNS323) += dns323-setup.o +obj-$(CONFIG_MACH_TS209) += ts209-setup.o diff --git a/arch/arm/mach-orion5x/Makefile.boot b/arch/arm/mach-orion5x/Makefile.boot new file mode 100644 index 000000000000..67039c3e0c48 --- /dev/null +++ b/arch/arm/mach-orion5x/Makefile.boot @@ -0,0 +1,3 @@ + zreladdr-y := 0x00008000 +params_phys-y := 0x00000100 +initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c new file mode 100644 index 000000000000..6b179371e0a2 --- /dev/null +++ b/arch/arm/mach-orion5x/addr-map.c @@ -0,0 +1,240 @@ +/* + * arch/arm/mach-orion5x/addr-map.c + * + * Address map functions for Marvell Orion 5x SoCs + * + * Maintainer: Tzachi Perelstein <tzachi@marvell.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/mbus.h> +#include <asm/hardware.h> +#include <asm/io.h> +#include "common.h" + +/* + * The Orion has fully programable address map. There's a separate address + * map for each of the device _master_ interfaces, e.g. CPU, PCI, PCIE, USB, + * Gigabit Ethernet, DMA/XOR engines, etc. Each interface has its own + * address decode windows that allow it to access any of the Orion resources. + * + * CPU address decoding -- + * Linux assumes that it is the boot loader that already setup the access to + * DDR and internal registers. + * Setup access to PCI and PCI-E IO/MEM space is issued by this file. + * Setup access to various devices located on the device bus interface (e.g. + * flashes, RTC, etc) should be issued by machine-setup.c according to + * specific board population (by using orion5x_setup_*_win()). + * + * Non-CPU Masters address decoding -- + * Unlike the CPU, we setup the access from Orion's master interfaces to DDR + * banks only (the typical use case). + * Setup access for each master to DDR is issued by common.c. + * + * Note: although orion_setbits() and orion_clrbits() are not atomic + * no locking is necessary here since code in this file is only called + * at boot time when there is no concurrency issues. + */ + +/* + * Generic Address Decode Windows bit settings + */ +#define TARGET_DDR 0 +#define TARGET_DEV_BUS 1 +#define TARGET_PCI 3 +#define TARGET_PCIE 4 +#define ATTR_DDR_CS(n) (((n) ==0) ? 0xe : \ + ((n) == 1) ? 0xd : \ + ((n) == 2) ? 0xb : \ + ((n) == 3) ? 0x7 : 0xf) +#define ATTR_PCIE_MEM 0x59 +#define ATTR_PCIE_IO 0x51 +#define ATTR_PCIE_WA 0x79 +#define ATTR_PCI_MEM 0x59 +#define ATTR_PCI_IO 0x51 +#define ATTR_DEV_CS0 0x1e +#define ATTR_DEV_CS1 0x1d +#define ATTR_DEV_CS2 0x1b +#define ATTR_DEV_BOOT 0xf +#define WIN_EN 1 + +/* + * Helpers to get DDR bank info + */ +#define DDR_BASE_CS(n) ORION5X_DDR_REG(0x1500 + ((n) * 8)) +#define DDR_SIZE_CS(n) ORION5X_DDR_REG(0x1504 + ((n) * 8)) +#define DDR_MAX_CS 4 +#define DDR_REG_TO_SIZE(reg) (((reg) | 0xffffff) + 1) +#define DDR_REG_TO_BASE(reg) ((reg) & 0xff000000) +#define DDR_BANK_EN 1 + +/* + * CPU Address Decode Windows registers + */ +#define CPU_WIN_CTRL(n) ORION5X_BRIDGE_REG(0x000 | ((n) << 4)) +#define CPU_WIN_BASE(n) ORION5X_BRIDGE_REG(0x004 | ((n) << 4)) +#define CPU_WIN_REMAP_LO(n) ORION5X_BRIDGE_REG(0x008 | ((n) << 4)) +#define CPU_WIN_REMAP_HI(n) ORION5X_BRIDGE_REG(0x00c | ((n) << 4)) + +/* + * Gigabit Ethernet Address Decode Windows registers + */ +#define ETH_WIN_BASE(win) ORION5X_ETH_REG(0x200 + ((win) * 8)) +#define ETH_WIN_SIZE(win) ORION5X_ETH_REG(0x204 + ((win) * 8)) +#define ETH_WIN_REMAP(win) ORION5X_ETH_REG(0x280 + ((win) * 4)) +#define ETH_WIN_EN ORION5X_ETH_REG(0x290) +#define ETH_WIN_PROT ORION5X_ETH_REG(0x294) +#define ETH_MAX_WIN 6 +#define ETH_MAX_REMAP_WIN 4 + + +struct mbus_dram_target_info orion5x_mbus_dram_info; + +static int __init orion5x_cpu_win_can_remap(int win) +{ + u32 dev, rev; + + orion5x_pcie_id(&dev, &rev); + if ((dev == MV88F5281_DEV_ID && win < 4) + || (dev == MV88F5182_DEV_ID && win < 2) + || (dev == MV88F5181_DEV_ID && win < 2)) + return 1; + + return 0; +} + +static void __init setup_cpu_win(int win, u32 base, u32 size, + u8 target, u8 attr, int remap) +{ + orion5x_write(CPU_WIN_BASE(win), base & 0xffff0000); + orion5x_write(CPU_WIN_CTRL(win), + ((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1); + + if (orion5x_cpu_win_can_remap(win)) { + if (remap < 0) + remap = base; + + orion5x_write(CPU_WIN_REMAP_LO(win), remap & 0xffff0000); + orion5x_write(CPU_WIN_REMAP_HI(win), 0); + } +} + +void __init orion5x_setup_cpu_mbus_bridge(void) +{ + int i; + int cs; + + /* + * First, disable and clear windows. + */ + for (i = 0; i < 8; i++) { + orion5x_write(CPU_WIN_BASE(i), 0); + orion5x_write(CPU_WIN_CTRL(i), 0); + if (orion5x_cpu_win_can_remap(i)) { + orion5x_write(CPU_WIN_REMAP_LO(i), 0); + orion5x_write(CPU_WIN_REMAP_HI(i), 0); + } + } + + /* + * Setup windows for PCI+PCIe IO+MEM space. + */ + setup_cpu_win(0, ORION5X_PCIE_IO_PHYS_BASE, ORION5X_PCIE_IO_SIZE, + TARGET_PCIE, ATTR_PCIE_IO, ORION5X_PCIE_IO_BUS_BASE); + setup_cpu_win(1, ORION5X_PCI_IO_PHYS_BASE, ORION5X_PCI_IO_SIZE, + TARGET_PCI, ATTR_PCI_IO, ORION5X_PCI_IO_BUS_BASE); + setup_cpu_win(2, ORION5X_PCIE_MEM_PHYS_BASE, ORION5X_PCIE_MEM_SIZE, + TARGET_PCIE, ATTR_PCIE_MEM, -1); + setup_cpu_win(3, ORION5X_PCI_MEM_PHYS_BASE, ORION5X_PCI_MEM_SIZE, + TARGET_PCI, ATTR_PCI_MEM, -1); + + /* + * Setup MBUS dram target info. + */ + orion5x_mbus_dram_info.mbus_dram_target_id = TARGET_DDR; + + for (i = 0, cs = 0; i < 4; i++) { + u32 base = readl(DDR_BASE_CS(i)); + u32 size = readl(DDR_SIZE_CS(i)); + + /* + * Chip select enabled? + */ + if (size & 1) { + struct mbus_dram_window *w; + + w = &orion5x_mbus_dram_info.cs[cs++]; + w->cs_index = i; + w->mbus_attr = 0xf & ~(1 << i); + w->base = base & 0xff000000; + w->size = (size | 0x00ffffff) + 1; + } + } + orion5x_mbus_dram_info.num_cs = cs; +} + +void __init orion5x_setup_dev_boot_win(u32 base, u32 size) +{ + setup_cpu_win(4, base, size, TARGET_DEV_BUS, ATTR_DEV_BOOT, -1); +} + +void __init orion5x_setup_dev0_win(u32 base, u32 size) +{ + setup_cpu_win(5, base, size, TARGET_DEV_BUS, ATTR_DEV_CS0, -1); +} + +void __init orion5x_setup_dev1_win(u32 base, u32 size) +{ + setup_cpu_win(6, base, size, TARGET_DEV_BUS, ATTR_DEV_CS1, -1); +} + +void __init orion5x_setup_dev2_win(u32 base, u32 size) +{ + setup_cpu_win(7, base, size, TARGET_DEV_BUS, ATTR_DEV_CS2, -1); +} + +void __init orion5x_setup_pcie_wa_win(u32 base, u32 size) +{ + setup_cpu_win(7, base, size, TARGET_PCIE, ATTR_PCIE_WA, -1); +} + +void __init orion5x_setup_eth_wins(void) +{ + int i; + + /* + * First, disable and clear windows + */ + for (i = 0; i < ETH_MAX_WIN; i++) { + orion5x_write(ETH_WIN_BASE(i), 0); + orion5x_write(ETH_WIN_SIZE(i), 0); + orion5x_setbits(ETH_WIN_EN, 1 << i); + orion5x_clrbits(ETH_WIN_PROT, 0x3 << (i * 2)); + if (i < ETH_MAX_REMAP_WIN) + orion5x_write(ETH_WIN_REMAP(i), 0); + } + + /* + * Setup windows for DDR banks. + */ + for (i = 0; i < DDR_MAX_CS; i++) { + u32 base, size; + size = orion5x_read(DDR_SIZE_CS(i)); + base = orion5x_read(DDR_BASE_CS(i)); + if (size & DDR_BANK_EN) { + base = DDR_REG_TO_BASE(base); + size = DDR_REG_TO_SIZE(size); + orion5x_write(ETH_WIN_SIZE(i), (size-1) & 0xffff0000); + orion5x_write(ETH_WIN_BASE(i), (base & 0xffff0000) | + (ATTR_DDR_CS(i) << 8) | + TARGET_DDR); + orion5x_clrbits(ETH_WIN_EN, 1 << i); + orion5x_setbits(ETH_WIN_PROT, 0x3 << (i * 2)); + } + } +} diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c new file mode 100644 index 000000000000..439c7784af02 --- /dev/null +++ b/arch/arm/mach-orion5x/common.c @@ -0,0 +1,391 @@ +/* + * arch/arm/mach-orion5x/common.c + * + * Core functions for Marvell Orion 5x SoCs + * + * Maintainer: Tzachi Perelstein <tzachi@marvell.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/serial_8250.h> +#include <linux/mbus.h> +#include <linux/mv643xx_eth.h> +#include <linux/mv643xx_i2c.h> +#include <linux/ata_platform.h> +#include <asm/page.h> +#include <asm/setup.h> +#include <asm/timex.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/time.h> +#include <asm/arch/hardware.h> +#include <asm/arch/orion5x.h> +#include <asm/plat-orion/ehci-orion.h> +#include <asm/plat-orion/orion_nand.h> +#include <asm/plat-orion/time.h> +#include "common.h" + +/***************************************************************************** + * I/O Address Mapping + ****************************************************************************/ +static struct map_desc orion5x_io_desc[] __initdata = { + { + .virtual = ORION5X_REGS_VIRT_BASE, + .pfn = __phys_to_pfn(ORION5X_REGS_PHYS_BASE), + .length = ORION5X_REGS_SIZE, + .type = MT_DEVICE + }, + { + .virtual = ORION5X_PCIE_IO_VIRT_BASE, + .pfn = __phys_to_pfn(ORION5X_PCIE_IO_PHYS_BASE), + .length = ORION5X_PCIE_IO_SIZE, + .type = MT_DEVICE + }, + { + .virtual = ORION5X_PCI_IO_VIRT_BASE, + .pfn = __phys_to_pfn(ORION5X_PCI_IO_PHYS_BASE), + .length = ORION5X_PCI_IO_SIZE, + .type = MT_DEVICE + }, + { + .virtual = ORION5X_PCIE_WA_VIRT_BASE, + .pfn = __phys_to_pfn(ORION5X_PCIE_WA_PHYS_BASE), + .length = ORION5X_PCIE_WA_SIZE, + .type = MT_DEVICE + }, +}; + +void __init orion5x_map_io(void) +{ + iotable_init(orion5x_io_desc, ARRAY_SIZE(orion5x_io_desc)); +} + +/***************************************************************************** + * UART + ****************************************************************************/ + +static struct resource orion5x_uart_resources[] = { + { + .start = UART0_PHYS_BASE, + .end = UART0_PHYS_BASE + 0xff, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_ORION5X_UART0, + .end = IRQ_ORION5X_UART0, + .flags = IORESOURCE_IRQ, + }, + { + .start = UART1_PHYS_BASE, + .end = UART1_PHYS_BASE + 0xff, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_ORION5X_UART1, + .end = IRQ_ORION5X_UART1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct plat_serial8250_port orion5x_uart_data[] = { + { + .mapbase = UART0_PHYS_BASE, + .membase = (char *)UART0_VIRT_BASE, + .irq = IRQ_ORION5X_UART0, + .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = ORION5X_TCLK, + }, + { + .mapbase = UART1_PHYS_BASE, + .membase = (char *)UART1_VIRT_BASE, + .irq = IRQ_ORION5X_UART1, + .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = ORION5X_TCLK, + }, + { }, +}; + +static struct platform_device orion5x_uart = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = orion5x_uart_data, + }, + .resource = orion5x_uart_resources, + .num_resources = ARRAY_SIZE(orion5x_uart_resources), +}; + +/******************************************************************************* + * USB Controller - 2 interfaces + ******************************************************************************/ + +static struct resource orion5x_ehci0_resources[] = { + { + .start = ORION5X_USB0_PHYS_BASE, + .end = ORION5X_USB0_PHYS_BASE + SZ_4K, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_ORION5X_USB0_CTRL, + .end = IRQ_ORION5X_USB0_CTRL, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource orion5x_ehci1_resources[] = { + { + .start = ORION5X_USB1_PHYS_BASE, + .end = ORION5X_USB1_PHYS_BASE + SZ_4K, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_ORION5X_USB1_CTRL, + .end = IRQ_ORION5X_USB1_CTRL, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct orion_ehci_data orion5x_ehci_data = { + .dram = &orion5x_mbus_dram_info, +}; + +static u64 ehci_dmamask = 0xffffffffUL; + +static struct platform_device orion5x_ehci0 = { + .name = "orion-ehci", + .id = 0, + .dev = { + .dma_mask = &ehci_dmamask, + .coherent_dma_mask = 0xffffffff, + .platform_data = &orion5x_ehci_data, + }, + .resource = orion5x_ehci0_resources, + .num_resources = ARRAY_SIZE(orion5x_ehci0_resources), +}; + +static struct platform_device orion5x_ehci1 = { + .name = "orion-ehci", + .id = 1, + .dev = { + .dma_mask = &ehci_dmamask, + .coherent_dma_mask = 0xffffffff, + .platform_data = &orion5x_ehci_data, + }, + .resource = orion5x_ehci1_resources, + .num_resources = ARRAY_SIZE(orion5x_ehci1_resources), +}; + +/***************************************************************************** + * Gigabit Ethernet port + * (The Orion and Discovery (MV643xx) families use the same Ethernet driver) + ****************************************************************************/ + +static struct resource orion5x_eth_shared_resources[] = { + { + .start = ORION5X_ETH_PHYS_BASE + 0x2000, + .end = ORION5X_ETH_PHYS_BASE + 0x3fff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device orion5x_eth_shared = { + .name = MV643XX_ETH_SHARED_NAME, + .id = 0, + .num_resources = 1, + .resource = orion5x_eth_shared_resources, +}; + +static struct resource orion5x_eth_resources[] = { + { + .name = "eth irq", + .start = IRQ_ORION5X_ETH_SUM, + .end = IRQ_ORION5X_ETH_SUM, + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device orion5x_eth = { + .name = MV643XX_ETH_NAME, + .id = 0, + .num_resources = 1, + .resource = orion5x_eth_resources, +}; + +void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data) +{ + orion5x_eth.dev.platform_data = eth_data; + platform_device_register(&orion5x_eth_shared); + platform_device_register(&orion5x_eth); +} + +/***************************************************************************** + * I2C controller + * (The Orion and Discovery (MV643xx) families share the same I2C controller) + ****************************************************************************/ + +static struct mv64xxx_i2c_pdata orion5x_i2c_pdata = { + .freq_m = 8, /* assumes 166 MHz TCLK */ + .freq_n = 3, + .timeout = 1000, /* Default timeout of 1 second */ +}; + +static struct resource orion5x_i2c_resources[] = { + { + .name = "i2c base", + .start = I2C_PHYS_BASE, + .end = I2C_PHYS_BASE + 0x20 -1, + .flags = IORESOURCE_MEM, + }, + { + .name = "i2c irq", + .start = IRQ_ORION5X_I2C, + .end = IRQ_ORION5X_I2C, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device orion5x_i2c = { + .name = MV64XXX_I2C_CTLR_NAME, + .id = 0, + .num_resources = ARRAY_SIZE(orion5x_i2c_resources), + .resource = orion5x_i2c_resources, + .dev = { + .platform_data = &orion5x_i2c_pdata, + }, +}; + +/***************************************************************************** + * Sata port + ****************************************************************************/ +static struct resource orion5x_sata_resources[] = { + { + .name = "sata base", + .start = ORION5X_SATA_PHYS_BASE, + .end = ORION5X_SATA_PHYS_BASE + 0x5000 - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "sata irq", + .start = IRQ_ORION5X_SATA, + .end = IRQ_ORION5X_SATA, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device orion5x_sata = { + .name = "sata_mv", + .id = 0, + .dev = { + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(orion5x_sata_resources), + .resource = orion5x_sata_resources, +}; + +void __init orion5x_sata_init(struct mv_sata_platform_data *sata_data) +{ + sata_data->dram = &orion5x_mbus_dram_info; + orion5x_sata.dev.platform_data = sata_data; + platform_device_register(&orion5x_sata); +} + +/***************************************************************************** + * Time handling + ****************************************************************************/ + +static void orion5x_timer_init(void) +{ + orion_time_init(IRQ_ORION5X_BRIDGE, ORION5X_TCLK); +} + +struct sys_timer orion5x_timer = { + .init = orion5x_timer_init, +}; + +/***************************************************************************** + * General + ****************************************************************************/ + +/* + * Identify device ID and rev from PCIE configuration header space '0'. + */ +static void __init orion5x_id(u32 *dev, u32 *rev, char **dev_name) +{ + orion5x_pcie_id(dev, rev); + + if (*dev == MV88F5281_DEV_ID) { + if (*rev == MV88F5281_REV_D2) { + *dev_name = "MV88F5281-D2"; + } else if (*rev == MV88F5281_REV_D1) { + *dev_name = "MV88F5281-D1"; + } else { + *dev_name = "MV88F5281-Rev-Unsupported"; + } + } else if (*dev == MV88F5182_DEV_ID) { + if (*rev == MV88F5182_REV_A2) { + *dev_name = "MV88F5182-A2"; + } else { + *dev_name = "MV88F5182-Rev-Unsupported"; + } + } else if (*dev == MV88F5181_DEV_ID) { + if (*rev == MV88F5181_REV_B1) { + *dev_name = "MV88F5181-Rev-B1"; + } else { + *dev_name = "MV88F5181-Rev-Unsupported"; + } + } else { + *dev_name = "Device-Unknown"; + } +} + +void __init orion5x_init(void) +{ + char *dev_name; + u32 dev, rev; + + orion5x_id(&dev, &rev, &dev_name); + printk(KERN_INFO "Orion ID: %s. TCLK=%d.\n", dev_name, ORION5X_TCLK); + + /* + * Setup Orion address map + */ + orion5x_setup_cpu_mbus_bridge(); + orion5x_setup_eth_wins(); + + /* + * Register devices. + */ + platform_device_register(&orion5x_uart); + platform_device_register(&orion5x_ehci0); + if (dev == MV88F5182_DEV_ID) + platform_device_register(&orion5x_ehci1); + platform_device_register(&orion5x_i2c); +} + +/* + * Many orion-based systems have buggy bootloader implementations. + * This is a common fixup for bogus memory tags. + */ +void __init tag_fixup_mem32(struct machine_desc *mdesc, struct tag *t, + char **from, struct meminfo *meminfo) +{ + for (; t->hdr.size; t = tag_next(t)) + if (t->hdr.tag == ATAG_MEM && + (!t->u.mem.size || t->u.mem.size & ~PAGE_MASK || + t->u.mem.start & ~PAGE_MASK)) { + printk(KERN_WARNING + "Clearing invalid memory bank %dKB@0x%08x\n", + t->u.mem.size / 1024, t->u.mem.start); + t->hdr.tag = 0; + } +} diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h new file mode 100644 index 000000000000..f4c4c9a72a7c --- /dev/null +++ b/arch/arm/mach-orion5x/common.h @@ -0,0 +1,72 @@ +#ifndef __ARCH_ORION5X_COMMON_H +#define __ARCH_ORION5X_COMMON_H + +/* + * Basic Orion init functions used early by machine-setup. + */ + +void orion5x_map_io(void); +void orion5x_init_irq(void); +void orion5x_init(void); +extern struct sys_timer orion5x_timer; + +/* + * Enumerations and functions for Orion windows mapping. Used by Orion core + * functions to map its interfaces and by the machine-setup to map its on- + * board devices. Details in /mach-orion/addr-map.c + */ +extern struct mbus_dram_target_info orion5x_mbus_dram_info; +void orion5x_setup_cpu_mbus_bridge(void); +void orion5x_setup_dev_boot_win(u32 base, u32 size); +void orion5x_setup_dev0_win(u32 base, u32 size); +void orion5x_setup_dev1_win(u32 base, u32 size); +void orion5x_setup_dev2_win(u32 base, u32 size); +void orion5x_setup_pcie_wa_win(u32 base, u32 size); +void orion5x_setup_eth_wins(void); + +/* + * Shared code used internally by other Orion core functions. + * (/mach-orion/pci.c) + */ + +struct pci_sys_data; +struct pci_bus; + +void orion5x_pcie_id(u32 *dev, u32 *rev); +int orion5x_pcie_local_bus_nr(void); +int orion5x_pci_local_bus_nr(void); +int orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys); +struct pci_bus *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys); + +/* + * Valid GPIO pins according to MPP setup, used by machine-setup. + * (/mach-orion/gpio.c). + */ + +void orion5x_gpio_set_valid_pins(u32 pins); +void gpio_display(void); /* debug */ + +/* + * Pull in Orion Ethernet platform_data, used by machine-setup + */ + +struct mv643xx_eth_platform_data; + +void orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data); + +/* + * Orion Sata platform_data, used by machine-setup + */ + +struct mv_sata_platform_data; + +void orion5x_sata_init(struct mv_sata_platform_data *sata_data); + +struct machine_desc; +struct meminfo; +struct tag; +extern void __init tag_fixup_mem32(struct machine_desc *, struct tag *, + char **, struct meminfo *); + + +#endif diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c new file mode 100644 index 000000000000..872aed372327 --- /dev/null +++ b/arch/arm/mach-orion5x/db88f5281-setup.c @@ -0,0 +1,361 @@ +/* + * arch/arm/mach-orion5x/db88f5281-setup.c + * + * Marvell Orion-2 Development Board Setup + * + * Maintainer: Tzachi Perelstein <tzachi@marvell.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/pci.h> +#include <linux/irq.h> +#include <linux/mtd/physmap.h> +#include <linux/mtd/nand.h> +#include <linux/timer.h> +#include <linux/mv643xx_eth.h> +#include <linux/i2c.h> +#include <asm/mach-types.h> +#include <asm/gpio.h> +#include <asm/mach/arch.h> +#include <asm/mach/pci.h> +#include <asm/arch/orion5x.h> +#include <asm/plat-orion/orion_nand.h> +#include "common.h" + +/***************************************************************************** + * DB-88F5281 on board devices + ****************************************************************************/ + +/* + * 512K NOR flash Device bus boot chip select + */ + +#define DB88F5281_NOR_BOOT_BASE 0xf4000000 +#define DB88F5281_NOR_BOOT_SIZE SZ_512K + +/* + * 7-Segment on Device bus chip select 0 + */ + +#define DB88F5281_7SEG_BASE 0xfa000000 +#define DB88F5281_7SEG_SIZE SZ_1K + +/* + * 32M NOR flash on Device bus chip select 1 + */ + +#define DB88F5281_NOR_BASE 0xfc000000 +#define DB88F5281_NOR_SIZE SZ_32M + +/* + * 32M NAND flash on Device bus chip select 2 + */ + +#define DB88F5281_NAND_BASE 0xfa800000 +#define DB88F5281_NAND_SIZE SZ_1K + +/* + * PCI + */ + +#define DB88F5281_PCI_SLOT0_OFFS 7 +#define DB88F5281_PCI_SLOT0_IRQ_PIN 12 +#define DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN 13 + +/***************************************************************************** + * 512M NOR Flash on Device bus Boot CS + ****************************************************************************/ + +static struct physmap_flash_data db88f5281_boot_flash_data = { + .width = 1, /* 8 bit bus width */ +}; + +static struct resource db88f5281_boot_flash_resource = { + .flags = IORESOURCE_MEM, + .start = DB88F5281_NOR_BOOT_BASE, + .end = DB88F5281_NOR_BOOT_BASE + DB88F5281_NOR_BOOT_SIZE - 1, +}; + +static struct platform_device db88f5281_boot_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &db88f5281_boot_flash_data, + }, + .num_resources = 1, + .resource = &db88f5281_boot_flash_resource, +}; + +/***************************************************************************** + * 32M NOR Flash on Device bus CS1 + ****************************************************************************/ + +static struct physmap_flash_data db88f5281_nor_flash_data = { + .width = 4, /* 32 bit bus width */ +}; + +static struct resource db88f5281_nor_flash_resource = { + .flags = IORESOURCE_MEM, + .start = DB88F5281_NOR_BASE, + .end = DB88F5281_NOR_BASE + DB88F5281_NOR_SIZE - 1, +}; + +static struct platform_device db88f5281_nor_flash = { + .name = "physmap-flash", + .id = 1, + .dev = { + .platform_data = &db88f5281_nor_flash_data, + }, + .num_resources = 1, + .resource = &db88f5281_nor_flash_resource, +}; + +/***************************************************************************** + * 32M NAND Flash on Device bus CS2 + ****************************************************************************/ + +static struct mtd_partition db88f5281_nand_parts[] = { + { + .name = "kernel", + .offset = 0, + .size = SZ_2M, + }, + { + .name = "root", + .offset = SZ_2M, + .size = (SZ_16M - SZ_2M), + }, + { + .name = "user", + .offset = SZ_16M, + .size = SZ_8M, + }, + { + .name = "recovery", + .offset = (SZ_16M + SZ_8M), + .size = SZ_8M, + }, +}; + +static struct resource db88f5281_nand_resource = { + .flags = IORESOURCE_MEM, + .start = DB88F5281_NAND_BASE, + .end = DB88F5281_NAND_BASE + DB88F5281_NAND_SIZE - 1, +}; + +static struct orion_nand_data db88f5281_nand_data = { + .parts = db88f5281_nand_parts, + .nr_parts = ARRAY_SIZE(db88f5281_nand_parts), + .cle = 0, + .ale = 1, + .width = 8, +}; + +static struct platform_device db88f5281_nand_flash = { + .name = "orion_nand", + .id = -1, + .dev = { + .platform_data = &db88f5281_nand_data, + }, + .resource = &db88f5281_nand_resource, + .num_resources = 1, +}; + +/***************************************************************************** + * 7-Segment on Device bus CS0 + * Dummy counter every 2 sec + ****************************************************************************/ + +static void __iomem *db88f5281_7seg; +static struct timer_list db88f5281_timer; + +static void db88f5281_7seg_event(unsigned long data) +{ + static int count = 0; + writel(0, db88f5281_7seg + (count << 4)); + count = (count + 1) & 7; + mod_timer(&db88f5281_timer, jiffies + 2 * HZ); +} + +static int __init db88f5281_7seg_init(void) +{ + if (machine_is_db88f5281()) { + db88f5281_7seg = ioremap(DB88F5281_7SEG_BASE, + DB88F5281_7SEG_SIZE); + if (!db88f5281_7seg) { + printk(KERN_ERR "Failed to ioremap db88f5281_7seg\n"); + return -EIO; + } + setup_timer(&db88f5281_timer, db88f5281_7seg_event, 0); + mod_timer(&db88f5281_timer, jiffies + 2 * HZ); + } + + return 0; +} + +__initcall(db88f5281_7seg_init); + +/***************************************************************************** + * PCI + ****************************************************************************/ + +void __init db88f5281_pci_preinit(void) +{ + int pin; + + /* + * Configure PCI GPIO IRQ pins + */ + pin = DB88F5281_PCI_SLOT0_IRQ_PIN; + if (gpio_request(pin, "PCI Int1") == 0) { + if (gpio_direction_input(pin) == 0) { + set_irq_type(gpio_to_irq(pin), IRQT_LOW); + } else { + printk(KERN_ERR "db88f5281_pci_preinit faield to " + "set_irq_type pin %d\n", pin); + gpio_free(pin); + } + } else { + printk(KERN_ERR "db88f5281_pci_preinit failed to gpio_request %d\n", pin); + } + + pin = DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN; + if (gpio_request(pin, "PCI Int2") == 0) { + if (gpio_direction_input(pin) == 0) { + set_irq_type(gpio_to_irq(pin), IRQT_LOW); + } else { + printk(KERN_ERR "db88f5281_pci_preinit faield " + "to set_irq_type pin %d\n", pin); + gpio_free(pin); + } + } else { + printk(KERN_ERR "db88f5281_pci_preinit failed to gpio_request %d\n", pin); + } +} + +static int __init db88f5281_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + /* + * PCIE IRQ is connected internally (not GPIO) + */ + if (dev->bus->number == orion5x_pcie_local_bus_nr()) + return IRQ_ORION5X_PCIE0_INT; + + /* + * PCI IRQs are connected via GPIOs + */ + switch (slot - DB88F5281_PCI_SLOT0_OFFS) { + case 0: + return gpio_to_irq(DB88F5281_PCI_SLOT0_IRQ_PIN); + case 1: + case 2: + return gpio_to_irq(DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN); + default: + return -1; + } +} + +static struct hw_pci db88f5281_pci __initdata = { + .nr_controllers = 2, + .preinit = db88f5281_pci_preinit, + .swizzle = pci_std_swizzle, + .setup = orion5x_pci_sys_setup, + .scan = orion5x_pci_sys_scan_bus, + .map_irq = db88f5281_pci_map_irq, +}; + +static int __init db88f5281_pci_init(void) +{ + if (machine_is_db88f5281()) + pci_common_init(&db88f5281_pci); + + return 0; +} + +subsys_initcall(db88f5281_pci_init); + +/***************************************************************************** + * Ethernet + ****************************************************************************/ +static struct mv643xx_eth_platform_data db88f5281_eth_data = { + .phy_addr = 8, + .force_phy_addr = 1, +}; + +/***************************************************************************** + * RTC DS1339 on I2C bus + ****************************************************************************/ +static struct i2c_board_info __initdata db88f5281_i2c_rtc = { + .driver_name = "rtc-ds1307", + .type = "ds1339", + .addr = 0x68, +}; + +/***************************************************************************** + * General Setup + ****************************************************************************/ + +static struct platform_device *db88f5281_devs[] __initdata = { + &db88f5281_boot_flash, + &db88f5281_nor_flash, + &db88f5281_nand_flash, +}; + +static void __init db88f5281_init(void) +{ + /* + * Basic Orion setup. Need to be called early. + */ + orion5x_init(); + + /* + * Setup the CPU address decode windows for our on-board devices + */ + orion5x_setup_dev_boot_win(DB88F5281_NOR_BOOT_BASE, + DB88F5281_NOR_BOOT_SIZE); + orion5x_setup_dev0_win(DB88F5281_7SEG_BASE, DB88F5281_7SEG_SIZE); + orion5x_setup_dev1_win(DB88F5281_NOR_BASE, DB88F5281_NOR_SIZE); + orion5x_setup_dev2_win(DB88F5281_NAND_BASE, DB88F5281_NAND_SIZE); + + /* + * Setup Multiplexing Pins: + * MPP0: GPIO (USB Over Current) MPP1: GPIO (USB Vbat input) + * MPP2: PCI_REQn[2] MPP3: PCI_GNTn[2] + * MPP4: PCI_REQn[3] MPP5: PCI_GNTn[3] + * MPP6: GPIO (JP0, CON17.2) MPP7: GPIO (JP1, CON17.1) + * MPP8: GPIO (JP2, CON11.2) MPP9: GPIO (JP3, CON11.3) + * MPP10: GPIO (RTC int) MPP11: GPIO (Baud Rate Generator) + * MPP12: GPIO (PCI int 1) MPP13: GPIO (PCI int 2) + * MPP14: NAND_REn[2] MPP15: NAND_WEn[2] + * MPP16: UART1_RX MPP17: UART1_TX + * MPP18: UART1_CTS MPP19: UART1_RTS + * MPP-DEV: DEV_D[16:31] + */ + orion5x_write(MPP_0_7_CTRL, 0x00222203); + orion5x_write(MPP_8_15_CTRL, 0x44000000); + orion5x_write(MPP_16_19_CTRL, 0); + orion5x_write(MPP_DEV_CTRL, 0); + + orion5x_gpio_set_valid_pins(0x00003fc3); + + platform_add_devices(db88f5281_devs, ARRAY_SIZE(db88f5281_devs)); + i2c_register_board_info(0, &db88f5281_i2c_rtc, 1); + orion5x_eth_init(&db88f5281_eth_data); +} + +MACHINE_START(DB88F5281, "Marvell Orion-2 Development Board") + /* Maintainer: Tzachi Perelstein <tzachi@marvell.com> */ + .phys_io = ORION5X_REGS_PHYS_BASE, + .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .init_machine = db88f5281_init, + .map_io = orion5x_map_io, + .init_irq = orion5x_init_irq, + .timer = &orion5x_timer, +MACHINE_END diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c new file mode 100644 index 000000000000..d67790ef236e --- /dev/null +++ b/arch/arm/mach-orion5x/dns323-setup.c @@ -0,0 +1,320 @@ +/* + * arch/arm/mach-orion5x/dns323-setup.c + * + * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU Lesser General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/pci.h> +#include <linux/irq.h> +#include <linux/mtd/physmap.h> +#include <linux/mv643xx_eth.h> +#include <linux/leds.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> +#include <linux/i2c.h> +#include <asm/mach-types.h> +#include <asm/gpio.h> +#include <asm/mach/arch.h> +#include <asm/mach/pci.h> +#include <asm/arch/orion5x.h> +#include "common.h" + +#define DNS323_GPIO_LED_RIGHT_AMBER 1 +#define DNS323_GPIO_LED_LEFT_AMBER 2 +#define DNS323_GPIO_LED_POWER 5 +#define DNS323_GPIO_OVERTEMP 6 +#define DNS323_GPIO_RTC 7 +#define DNS323_GPIO_POWER_OFF 8 +#define DNS323_GPIO_KEY_POWER 9 +#define DNS323_GPIO_KEY_RESET 10 + +/**************************************************************************** + * PCI setup + */ + +static int __init dns323_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + /* PCI-E */ + if (dev->bus->number == orion5x_pcie_local_bus_nr()) + return IRQ_ORION5X_PCIE0_INT; + + pr_err("%s: requested mapping for unknown bus\n", __func__); + + return -1; +} + +static struct hw_pci dns323_pci __initdata = { + .nr_controllers = 1, + .swizzle = pci_std_swizzle, + .setup = orion5x_pci_sys_setup, + .scan = orion5x_pci_sys_scan_bus, + .map_irq = dns323_pci_map_irq, +}; + +static int __init dns323_pci_init(void) +{ + if (machine_is_dns323()) + pci_common_init(&dns323_pci); + + return 0; +} + +subsys_initcall(dns323_pci_init); + +/**************************************************************************** + * Ethernet + */ + +static struct mv643xx_eth_platform_data dns323_eth_data = { + .phy_addr = 8, + .force_phy_addr = 1, +}; + +/**************************************************************************** + * 8MiB NOR flash (Spansion S29GL064M90TFIR4) + * + * Layout as used by D-Link: + * 0x00000000-0x00010000 : "MTD1" + * 0x00010000-0x00020000 : "MTD2" + * 0x00020000-0x001a0000 : "Linux Kernel" + * 0x001a0000-0x007d0000 : "File System" + * 0x007d0000-0x00800000 : "u-boot" + */ + +#define DNS323_NOR_BOOT_BASE 0xf4000000 +#define DNS323_NOR_BOOT_SIZE SZ_8M + +static struct mtd_partition dns323_partitions[] = { + { + .name = "MTD1", + .size = 0x00010000, + .offset = 0, + }, { + .name = "MTD2", + .size = 0x00010000, + .offset = 0x00010000, + }, { + .name = "Linux Kernel", + .size = 0x00180000, + .offset = 0x00020000, + }, { + .name = "File System", + .size = 0x00630000, + .offset = 0x001A0000, + }, { + .name = "u-boot", + .size = 0x00030000, + .offset = 0x007d0000, + } +}; + +static struct physmap_flash_data dns323_nor_flash_data = { + .width = 1, + .parts = dns323_partitions, + .nr_parts = ARRAY_SIZE(dns323_partitions) +}; + +static struct resource dns323_nor_flash_resource = { + .flags = IORESOURCE_MEM, + .start = DNS323_NOR_BOOT_BASE, + .end = DNS323_NOR_BOOT_BASE + DNS323_NOR_BOOT_SIZE - 1, +}; + +static struct platform_device dns323_nor_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { .platform_data = &dns323_nor_flash_data, }, + .resource = &dns323_nor_flash_resource, + .num_resources = 1, +}; + +/**************************************************************************** + * GPIO LEDs (simple - doesn't use hardware blinking support) + */ + +static struct gpio_led dns323_leds[] = { + { + .name = "power:blue", + .gpio = DNS323_GPIO_LED_POWER, + .active_low = 1, + }, { + .name = "right:amber", + .gpio = DNS323_GPIO_LED_RIGHT_AMBER, + .active_low = 1, + }, { + .name = "left:amber", + .gpio = DNS323_GPIO_LED_LEFT_AMBER, + .active_low = 1, + }, +}; + +static struct gpio_led_platform_data dns323_led_data = { + .num_leds = ARRAY_SIZE(dns323_leds), + .leds = dns323_leds, +}; + +static struct platform_device dns323_gpio_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { .platform_data = &dns323_led_data, }, +}; + +/**************************************************************************** + * GPIO Attached Keys + */ + +static struct gpio_keys_button dns323_buttons[] = { + { + .code = KEY_RESTART, + .gpio = DNS323_GPIO_KEY_RESET, + .desc = "Reset Button", + .active_low = 1, + }, + { + .code = KEY_POWER, + .gpio = DNS323_GPIO_KEY_POWER, + .desc = "Power Button", + .active_low = 1, + } +}; + +static struct gpio_keys_platform_data dns323_button_data = { + .buttons = dns323_buttons, + .nbuttons = ARRAY_SIZE(dns323_buttons), +}; + +static struct platform_device dns323_button_device = { + .name = "gpio-keys", + .id = -1, + .num_resources = 0, + .dev = { .platform_data = &dns323_button_data, }, +}; + +/**************************************************************************** + * General Setup + */ + +static struct platform_device *dns323_plat_devices[] __initdata = { + &dns323_nor_flash, + &dns323_gpio_leds, + &dns323_button_device, +}; + +/* + * On the DNS-323 the following devices are attached via I2C: + * + * i2c addr | chip | description + * 0x3e | GMT G760Af | fan speed PWM controller + * 0x48 | GMT G751-2f | temp. sensor and therm. watchdog (LM75 compatible) + * 0x68 | ST M41T80 | RTC w/ alarm + */ +static struct i2c_board_info __initdata dns323_i2c_devices[] = { + { + I2C_BOARD_INFO("g760a", 0x3e), + .type = "g760a", + }, +#if 0 + /* this entry requires the new-style driver model lm75 driver, + * for the meantime "insmod lm75.ko force_lm75=0,0x48" is needed */ + { + I2C_BOARD_INFO("lm75", 0x48), + .type = "g751", + }, +#endif + { + I2C_BOARD_INFO("rtc-m41t80", 0x68), + .type = "m41t80", + } +}; + +/* DNS-323 specific power off method */ +static void dns323_power_off(void) +{ + pr_info("%s: triggering power-off...\n", __func__); + gpio_set_value(DNS323_GPIO_POWER_OFF, 1); +} + +static void __init dns323_init(void) +{ + /* Setup basic Orion functions. Need to be called early. */ + orion5x_init(); + + /* setup flash mapping + * CS3 holds a 8 MB Spansion S29GL064M90TFIR4 + */ + orion5x_setup_dev_boot_win(DNS323_NOR_BOOT_BASE, DNS323_NOR_BOOT_SIZE); + + /* DNS-323 has a Marvell 88X7042 SATA controller attached via PCIE + * + * Open a special address decode windows for the PCIE WA. + */ + orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE, + ORION5X_PCIE_WA_SIZE); + + /* set MPP to 0 as D-Link's 2.6.12.6 kernel did */ + orion5x_write(MPP_0_7_CTRL, 0); + orion5x_write(MPP_8_15_CTRL, 0); + orion5x_write(MPP_16_19_CTRL, 0); + orion5x_write(MPP_DEV_CTRL, 0); + + /* Define used GPIO pins + + GPIO Map: + + | 0 | | PEX_RST_OUT (not controlled by GPIO) + | 1 | Out | right amber LED (= sata ch0 LED) (low-active) + | 2 | Out | left amber LED (= sata ch1 LED) (low-active) + | 3 | Out | //unknown// + | 4 | Out | power button LED (low-active, together with pin #5) + | 5 | Out | power button LED (low-active, together with pin #4) + | 6 | In | GMT G751-2f overtemp. shutdown signal (low-active) + | 7 | In | M41T80 nIRQ/OUT/SQW signal + | 8 | Out | triggers power off (high-active) + | 9 | In | power button switch (low-active) + | 10 | In | reset button switch (low-active) + | 11 | Out | //unknown// + | 12 | Out | //unknown// + | 13 | Out | //unknown// + | 14 | Out | //unknown// + | 15 | Out | //unknown// + */ + orion5x_gpio_set_valid_pins(0x07f6); + + /* register dns323 specific power-off method */ + if ((gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0) + || (gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0)) + pr_err("DNS323: failed to setup power-off GPIO\n"); + + pm_power_off = dns323_power_off; + + /* register flash and other platform devices */ + platform_add_devices(dns323_plat_devices, + ARRAY_SIZE(dns323_plat_devices)); + + i2c_register_board_info(0, dns323_i2c_devices, + ARRAY_SIZE(dns323_i2c_devices)); + + orion5x_eth_init(&dns323_eth_data); +} + +/* Warning: D-Link uses a wrong mach-type (=526) in their bootloader */ +MACHINE_START(DNS323, "D-Link DNS-323") + /* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */ + .phys_io = ORION5X_REGS_PHYS_BASE, + .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC, + .boot_params = 0x00000100, + .init_machine = dns323_init, + .map_io = orion5x_map_io, + .init_irq = orion5x_init_irq, + .timer = &orion5x_timer, + .fixup = tag_fixup_mem32, +MACHINE_END diff --git a/arch/arm/mach-orion5x/gpio.c b/arch/arm/mach-orion5x/gpio.c new file mode 100644 index 000000000000..8108c316c426 --- /dev/null +++ b/arch/arm/mach-orion5x/gpio.c @@ -0,0 +1,226 @@ +/* + * arch/arm/mach-orion5x/gpio.c + * + * GPIO functions for Marvell Orion System On Chip + * + * Maintainer: Tzachi Perelstein <tzachi@marvell.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/bitops.h> +#include <asm/gpio.h> +#include <asm/io.h> +#include <asm/arch/orion5x.h> +#include "common.h" + +static DEFINE_SPINLOCK(gpio_lock); +static unsigned long gpio_valid[BITS_TO_LONGS(GPIO_MAX)]; +static const char *gpio_label[GPIO_MAX]; /* non null for allocated GPIOs */ + +void __init orion5x_gpio_set_valid_pins(u32 pins) +{ + gpio_valid[0] = pins; +} + +/* + * GENERIC_GPIO primitives + */ +int gpio_direction_input(unsigned pin) +{ + unsigned long flags; + + if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) { + pr_debug("%s: invalid GPIO %d\n", __func__, pin); + return -EINVAL; + } + + spin_lock_irqsave(&gpio_lock, flags); + + /* + * Some callers might have not used the gpio_request(), + * so flag this pin as requested now. + */ + if (!gpio_label[pin]) + gpio_label[pin] = "?"; + + orion5x_setbits(GPIO_IO_CONF, 1 << pin); + + spin_unlock_irqrestore(&gpio_lock, flags); + return 0; +} +EXPORT_SYMBOL(gpio_direction_input); + +int gpio_direction_output(unsigned pin, int value) +{ + unsigned long flags; + int mask; + + if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) { + pr_debug("%s: invalid GPIO %d\n", __func__, pin); + return -EINVAL; + } + + spin_lock_irqsave(&gpio_lock, flags); + + /* + * Some callers might have not used the gpio_request(), + * so flag this pin as requested now. + */ + if (!gpio_label[pin]) + gpio_label[pin] = "?"; + + mask = 1 << pin; + orion5x_clrbits(GPIO_BLINK_EN, mask); + if (value) + orion5x_setbits(GPIO_OUT, mask); + else + orion5x_clrbits(GPIO_OUT, mask); + orion5x_clrbits(GPIO_IO_CONF, mask); + + spin_unlock_irqrestore(&gpio_lock, flags); + return 0; +} +EXPORT_SYMBOL(gpio_direction_output); + +int gpio_get_value(unsigned pin) +{ + int val, mask = 1 << pin; + + if (orion5x_read(GPIO_IO_CONF) & mask) + val = orion5x_read(GPIO_DATA_IN) ^ orion5x_read(GPIO_IN_POL); + else + val = orion5x_read(GPIO_OUT); + + return val & mask; +} +EXPORT_SYMBOL(gpio_get_value); + +void gpio_set_value(unsigned pin, int value) +{ + unsigned long flags; + int mask = 1 << pin; + + spin_lock_irqsave(&gpio_lock, flags); + + orion5x_clrbits(GPIO_BLINK_EN, mask); + if (value) + orion5x_setbits(GPIO_OUT, mask); + else + orion5x_clrbits(GPIO_OUT, mask); + + spin_unlock_irqrestore(&gpio_lock, flags); +} +EXPORT_SYMBOL(gpio_set_value); + +void orion5x_gpio_set_blink(unsigned pin, int blink) +{ + unsigned long flags; + int mask = 1 << pin; + + spin_lock_irqsave(&gpio_lock, flags); + + orion5x_clrbits(GPIO_OUT, mask); + if (blink) + orion5x_setbits(GPIO_BLINK_EN, mask); + else + orion5x_clrbits(GPIO_BLINK_EN, mask); + + spin_unlock_irqrestore(&gpio_lock, flags); +} +EXPORT_SYMBOL(orion5x_gpio_set_blink); + +int gpio_request(unsigned pin, const char *label) +{ + int ret = 0; + unsigned long flags; + + if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) { + pr_debug("%s: invalid GPIO %d\n", __func__, pin); + return -EINVAL; + } + + spin_lock_irqsave(&gpio_lock, flags); + + if (gpio_label[pin]) { + pr_debug("%s: GPIO %d already used as %s\n", + __func__, pin, gpio_label[pin]); + ret = -EBUSY; + } else + gpio_label[pin] = label ? label : "?"; + + spin_unlock_irqrestore(&gpio_lock, flags); + return ret; +} +EXPORT_SYMBOL(gpio_request); + +void gpio_free(unsigned pin) +{ + if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) { + pr_debug("%s: invalid GPIO %d\n", __func__, pin); + return; + } + + if (!gpio_label[pin]) + pr_warning("%s: GPIO %d already freed\n", __func__, pin); + else + gpio_label[pin] = NULL; +} +EXPORT_SYMBOL(gpio_free); + +/* Debug helper */ +void gpio_display(void) +{ + int i; + + for (i = 0; i < GPIO_MAX; i++) { + printk(KERN_DEBUG "Pin-%d: ", i); + + if (!test_bit(i, gpio_valid)) { + printk("non-GPIO\n"); + } else if (!gpio_label[i]) { + printk("GPIO, free\n"); + } else { + printk("GPIO, used by %s, ", gpio_label[i]); + if (orion5x_read(GPIO_IO_CONF) & (1 << i)) { + printk("input, active %s, level %s, edge %s\n", + ((orion5x_read(GPIO_IN_POL) >> i) & 1) ? "low" : "high", + ((orion5x_read(GPIO_LEVEL_MASK) >> i) & 1) ? "enabled" : "masked", + ((orion5x_read(GPIO_EDGE_MASK) >> i) & 1) ? "enabled" : "masked"); + } else { + printk("output, val=%d\n", (orion5x_read(GPIO_OUT) >> i) & 1); + } + } + } + + printk(KERN_DEBUG "MPP_0_7_CTRL (0x%08x) = 0x%08x\n", + MPP_0_7_CTRL, orion5x_read(MPP_0_7_CTRL)); + printk(KERN_DEBUG "MPP_8_15_CTRL (0x%08x) = 0x%08x\n", + MPP_8_15_CTRL, orion5x_read(MPP_8_15_CTRL)); + printk(KERN_DEBUG "MPP_16_19_CTRL (0x%08x) = 0x%08x\n", + MPP_16_19_CTRL, orion5x_read(MPP_16_19_CTRL)); + printk(KERN_DEBUG "MPP_DEV_CTRL (0x%08x) = 0x%08x\n", + MPP_DEV_CTRL, orion5x_read(MPP_DEV_CTRL)); + printk(KERN_DEBUG "GPIO_OUT (0x%08x) = 0x%08x\n", + GPIO_OUT, orion5x_read(GPIO_OUT)); + printk(KERN_DEBUG "GPIO_IO_CONF (0x%08x) = 0x%08x\n", + GPIO_IO_CONF, orion5x_read(GPIO_IO_CONF)); + printk(KERN_DEBUG "GPIO_BLINK_EN (0x%08x) = 0x%08x\n", + GPIO_BLINK_EN, orion5x_read(GPIO_BLINK_EN)); + printk(KERN_DEBUG "GPIO_IN_POL (0x%08x) = 0x%08x\n", + GPIO_IN_POL, orion5x_read(GPIO_IN_POL)); + printk(KERN_DEBUG "GPIO_DATA_IN (0x%08x) = 0x%08x\n", + GPIO_DATA_IN, orion5x_read(GPIO_DATA_IN)); + printk(KERN_DEBUG "GPIO_LEVEL_MASK (0x%08x) = 0x%08x\n", + GPIO_LEVEL_MASK, orion5x_read(GPIO_LEVEL_MASK)); + printk(KERN_DEBUG "GPIO_EDGE_CAUSE (0x%08x) = 0x%08x\n", + GPIO_EDGE_CAUSE, orion5x_read(GPIO_EDGE_CAUSE)); + printk(KERN_DEBUG "GPIO_EDGE_MASK (0x%08x) = 0x%08x\n", + GPIO_EDGE_MASK, orion5x_read(GPIO_EDGE_MASK)); +} diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c new file mode 100644 index 000000000000..dd21f38c5d37 --- /dev/null +++ b/arch/arm/mach-orion5x/irq.c @@ -0,0 +1,211 @@ +/* + * arch/arm/mach-orion5x/irq.c + * + * Core IRQ functions for Marvell Orion System On Chip + * + * Maintainer: Tzachi Perelstein <tzachi@marvell.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <asm/gpio.h> +#include <asm/io.h> +#include <asm/arch/orion5x.h> +#include <asm/plat-orion/irq.h> +#include "common.h" + +/***************************************************************************** + * Orion GPIO IRQ + * + * GPIO_IN_POL register controlls whether GPIO_DATA_IN will hold the same + * value of the line or the opposite value. + * + * Level IRQ handlers: DATA_IN is used directly as cause register. + * Interrupt are masked by LEVEL_MASK registers. + * Edge IRQ handlers: Change in DATA_IN are latched in EDGE_CAUSE. + * Interrupt are masked by EDGE_MASK registers. + * Both-edge handlers: Similar to regular Edge handlers, but also swaps + * the polarity to catch the next line transaction. + * This is a race condition that might not perfectly + * work on some use cases. + * + * Every eight GPIO lines are grouped (OR'ed) before going up to main + * cause register. + * + * EDGE cause mask + * data-in /--------| |-----| |----\ + * -----| |----- ---- to main cause reg + * X \----------------| |----/ + * polarity LEVEL mask + * + ****************************************************************************/ +static void orion5x_gpio_irq_ack(u32 irq) +{ + int pin = irq_to_gpio(irq); + if (irq_desc[irq].status & IRQ_LEVEL) + /* + * Mask bit for level interrupt + */ + orion5x_clrbits(GPIO_LEVEL_MASK, 1 << pin); + else + /* + * Clear casue bit for egde interrupt + */ + orion5x_clrbits(GPIO_EDGE_CAUSE, 1 << pin); +} + +static void orion5x_gpio_irq_mask(u32 irq) +{ + int pin = irq_to_gpio(irq); + if (irq_desc[irq].status & IRQ_LEVEL) + orion5x_clrbits(GPIO_LEVEL_MASK, 1 << pin); + else + orion5x_clrbits(GPIO_EDGE_MASK, 1 << pin); +} + +static void orion5x_gpio_irq_unmask(u32 irq) +{ + int pin = irq_to_gpio(irq); + if (irq_desc[irq].status & IRQ_LEVEL) + orion5x_setbits(GPIO_LEVEL_MASK, 1 << pin); + else + orion5x_setbits(GPIO_EDGE_MASK, 1 << pin); +} + +static int orion5x_gpio_set_irq_type(u32 irq, u32 type) +{ + int pin = irq_to_gpio(irq); + struct irq_desc *desc; + + if ((orion5x_read(GPIO_IO_CONF) & (1 << pin)) == 0) { + printk(KERN_ERR "orion5x_gpio_set_irq_type failed " + "(irq %d, pin %d).\n", irq, pin); + return -EINVAL; + } + + desc = irq_desc + irq; + + switch (type) { + case IRQT_HIGH: + desc->handle_irq = handle_level_irq; + desc->status |= IRQ_LEVEL; + orion5x_clrbits(GPIO_IN_POL, (1 << pin)); + break; + case IRQT_LOW: + desc->handle_irq = handle_level_irq; + desc->status |= IRQ_LEVEL; + orion5x_setbits(GPIO_IN_POL, (1 << pin)); + break; + case IRQT_RISING: + desc->handle_irq = handle_edge_irq; + desc->status &= ~IRQ_LEVEL; + orion5x_clrbits(GPIO_IN_POL, (1 << pin)); + break; + case IRQT_FALLING: + desc->handle_irq = handle_edge_irq; + desc->status &= ~IRQ_LEVEL; + orion5x_setbits(GPIO_IN_POL, (1 << pin)); + break; + case IRQT_BOTHEDGE: + desc->handle_irq = handle_edge_irq; + desc->status &= ~IRQ_LEVEL; + /* + * set initial polarity based on current input level + */ + if ((orion5x_read(GPIO_IN_POL) ^ orion5x_read(GPIO_DATA_IN)) + & (1 << pin)) + orion5x_setbits(GPIO_IN_POL, (1 << pin)); /* falling */ + else + orion5x_clrbits(GPIO_IN_POL, (1 << pin)); /* rising */ + + break; + default: + printk(KERN_ERR "failed to set irq=%d (type=%d)\n", irq, type); + return -EINVAL; + } + + desc->status &= ~IRQ_TYPE_SENSE_MASK; + desc->status |= type & IRQ_TYPE_SENSE_MASK; + + return 0; +} + +static struct irq_chip orion5x_gpio_irq_chip = { + .name = "Orion-IRQ-GPIO", + .ack = orion5x_gpio_irq_ack, + .mask = orion5x_gpio_irq_mask, + .unmask = orion5x_gpio_irq_unmask, + .set_type = orion5x_gpio_set_irq_type, +}; + +static void orion5x_gpio_irq_handler(unsigned int irq, struct irq_desc *desc) +{ + u32 cause, offs, pin; + + BUG_ON(irq < IRQ_ORION5X_GPIO_0_7 || irq > IRQ_ORION5X_GPIO_24_31); + offs = (irq - IRQ_ORION5X_GPIO_0_7) * 8; + cause = (orion5x_read(GPIO_DATA_IN) & orion5x_read(GPIO_LEVEL_MASK)) | + (orion5x_read(GPIO_EDGE_CAUSE) & orion5x_read(GPIO_EDGE_MASK)); + + for (pin = offs; pin < offs + 8; pin++) { + if (cause & (1 << pin)) { + irq = gpio_to_irq(pin); + desc = irq_desc + irq; + if ((desc->status & IRQ_TYPE_SENSE_MASK) == IRQT_BOTHEDGE) { + /* Swap polarity (race with GPIO line) */ + u32 polarity = orion5x_read(GPIO_IN_POL); + polarity ^= 1 << pin; + orion5x_write(GPIO_IN_POL, polarity); + } + desc_handle_irq(irq, desc); + } + } +} + +static void __init orion5x_init_gpio_irq(void) +{ + int i; + struct irq_desc *desc; + + /* + * Mask and clear GPIO IRQ interrupts + */ + orion5x_write(GPIO_LEVEL_MASK, 0x0); + orion5x_write(GPIO_EDGE_MASK, 0x0); + orion5x_write(GPIO_EDGE_CAUSE, 0x0); + + /* + * Register chained level handlers for GPIO IRQs by default. + * User can use set_type() if he wants to use edge types handlers. + */ + for (i = IRQ_ORION5X_GPIO_START; i < NR_IRQS; i++) { + set_irq_chip(i, &orion5x_gpio_irq_chip); + set_irq_handler(i, handle_level_irq); + desc = irq_desc + i; + desc->status |= IRQ_LEVEL; + set_irq_flags(i, IRQF_VALID); + } + set_irq_chained_handler(IRQ_ORION5X_GPIO_0_7, orion5x_gpio_irq_handler); + set_irq_chained_handler(IRQ_ORION5X_GPIO_8_15, orion5x_gpio_irq_handler); + set_irq_chained_handler(IRQ_ORION5X_GPIO_16_23, orion5x_gpio_irq_handler); + set_irq_chained_handler(IRQ_ORION5X_GPIO_24_31, orion5x_gpio_irq_handler); +} + +/***************************************************************************** + * Orion Main IRQ + ****************************************************************************/ +static void __init orion5x_init_main_irq(void) +{ + orion_irq_init(0, (void __iomem *)MAIN_IRQ_MASK); +} + +void __init orion5x_init_irq(void) +{ + orion5x_init_main_irq(); + orion5x_init_gpio_irq(); +} diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c new file mode 100644 index 000000000000..91413455beba --- /dev/null +++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c @@ -0,0 +1,256 @@ +/* + * arch/arm/mach-orion5x/kurobox_pro-setup.c + * + * Maintainer: Ronen Shitrit <rshitrit@marvell.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/pci.h> +#include <linux/irq.h> +#include <linux/mtd/physmap.h> +#include <linux/mtd/nand.h> +#include <linux/mv643xx_eth.h> +#include <linux/i2c.h> +#include <linux/ata_platform.h> +#include <asm/mach-types.h> +#include <asm/gpio.h> +#include <asm/mach/arch.h> +#include <asm/mach/pci.h> +#include <asm/arch/orion5x.h> +#include <asm/plat-orion/orion_nand.h> +#include "common.h" + +/***************************************************************************** + * KUROBOX-PRO Info + ****************************************************************************/ + +/* + * 256K NOR flash Device bus boot chip select + */ + +#define KUROBOX_PRO_NOR_BOOT_BASE 0xf4000000 +#define KUROBOX_PRO_NOR_BOOT_SIZE SZ_256K + +/* + * 256M NAND flash on Device bus chip select 1 + */ + +#define KUROBOX_PRO_NAND_BASE 0xfc000000 +#define KUROBOX_PRO_NAND_SIZE SZ_2M + +/***************************************************************************** + * 256MB NAND Flash on Device bus CS0 + ****************************************************************************/ + +static struct mtd_partition kurobox_pro_nand_parts[] = { + { + .name = "uImage", + .offset = 0, + .size = SZ_4M, + }, + { + .name = "rootfs", + .offset = SZ_4M, + .size = SZ_64M, + }, + { + .name = "extra", + .offset = SZ_4M + SZ_64M, + .size = SZ_256M - (SZ_4M + SZ_64M), + }, +}; + +static struct resource kurobox_pro_nand_resource = { + .flags = IORESOURCE_MEM, + .start = KUROBOX_PRO_NAND_BASE, + .end = KUROBOX_PRO_NAND_BASE + KUROBOX_PRO_NAND_SIZE - 1, +}; + +static struct orion_nand_data kurobox_pro_nand_data = { + .parts = kurobox_pro_nand_parts, + .nr_parts = ARRAY_SIZE(kurobox_pro_nand_parts), + .cle = 0, + .ale = 1, + .width = 8, +}; + +static struct platform_device kurobox_pro_nand_flash = { + .name = "orion_nand", + .id = -1, + .dev = { + .platform_data = &kurobox_pro_nand_data, + }, + .resource = &kurobox_pro_nand_resource, + .num_resources = 1, +}; + +/***************************************************************************** + * 256KB NOR Flash on BOOT Device + ****************************************************************************/ + +static struct physmap_flash_data kurobox_pro_nor_flash_data = { + .width = 1, +}; + +static struct resource kurobox_pro_nor_flash_resource = { + .flags = IORESOURCE_MEM, + .start = KUROBOX_PRO_NOR_BOOT_BASE, + .end = KUROBOX_PRO_NOR_BOOT_BASE + KUROBOX_PRO_NOR_BOOT_SIZE - 1, +}; + +static struct platform_device kurobox_pro_nor_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &kurobox_pro_nor_flash_data, + }, + .num_resources = 1, + .resource = &kurobox_pro_nor_flash_resource, +}; + +/***************************************************************************** + * PCI + ****************************************************************************/ + +static int __init kurobox_pro_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + /* + * PCI isn't used on the Kuro + */ + if (dev->bus->number == orion5x_pcie_local_bus_nr()) + return IRQ_ORION5X_PCIE0_INT; + else + printk(KERN_ERR "kurobox_pro_pci_map_irq failed, unknown bus\n"); + + return -1; +} + +static struct hw_pci kurobox_pro_pci __initdata = { + .nr_controllers = 1, + .swizzle = pci_std_swizzle, + .setup = orion5x_pci_sys_setup, + .scan = orion5x_pci_sys_scan_bus, + .map_irq = kurobox_pro_pci_map_irq, +}; + +static int __init kurobox_pro_pci_init(void) +{ + if (machine_is_kurobox_pro()) + pci_common_init(&kurobox_pro_pci); + + return 0; +} + +subsys_initcall(kurobox_pro_pci_init); + +/***************************************************************************** + * Ethernet + ****************************************************************************/ + +static struct mv643xx_eth_platform_data kurobox_pro_eth_data = { + .phy_addr = 8, + .force_phy_addr = 1, +}; + +/***************************************************************************** + * RTC 5C372a on I2C bus + ****************************************************************************/ +static struct i2c_board_info __initdata kurobox_pro_i2c_rtc = { + .driver_name = "rtc-rs5c372", + .type = "rs5c372a", + .addr = 0x32, +}; + +/***************************************************************************** + * SATA + ****************************************************************************/ +static struct mv_sata_platform_data kurobox_pro_sata_data = { + .n_ports = 2, +}; + +/***************************************************************************** + * General Setup + ****************************************************************************/ + +static void __init kurobox_pro_init(void) +{ + /* + * Setup basic Orion functions. Need to be called early. + */ + orion5x_init(); + + /* + * Setup the CPU address decode windows for our devices + */ + orion5x_setup_dev_boot_win(KUROBOX_PRO_NOR_BOOT_BASE, + KUROBOX_PRO_NOR_BOOT_SIZE); + orion5x_setup_dev0_win(KUROBOX_PRO_NAND_BASE, KUROBOX_PRO_NAND_SIZE); + + /* + * Open a special address decode windows for the PCIE WA. + */ + orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE, + ORION5X_PCIE_WA_SIZE); + + /* + * Setup Multiplexing Pins -- + * MPP[0-1] Not used + * MPP[2] GPIO Micon + * MPP[3] GPIO RTC + * MPP[4-5] Not used + * MPP[6] Nand Flash REn + * MPP[7] Nand Flash WEn + * MPP[8-11] Not used + * MPP[12] SATA 0 presence Indication + * MPP[13] SATA 1 presence Indication + * MPP[14] SATA 0 active Indication + * MPP[15] SATA 1 active indication + * MPP[16-19] Not used + */ + orion5x_write(MPP_0_7_CTRL, 0x44220003); + orion5x_write(MPP_8_15_CTRL, 0x55550000); + orion5x_write(MPP_16_19_CTRL, 0x0); + + orion5x_gpio_set_valid_pins(0x0000000c); + + platform_device_register(&kurobox_pro_nor_flash); + if (machine_is_kurobox_pro()) + platform_device_register(&kurobox_pro_nand_flash); + i2c_register_board_info(0, &kurobox_pro_i2c_rtc, 1); + orion5x_eth_init(&kurobox_pro_eth_data); + orion5x_sata_init(&kurobox_pro_sata_data); +} + +#ifdef CONFIG_MACH_KUROBOX_PRO +MACHINE_START(KUROBOX_PRO, "Buffalo/Revogear Kurobox Pro") + /* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */ + .phys_io = ORION5X_REGS_PHYS_BASE, + .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC, + .boot_params = 0x00000100, + .init_machine = kurobox_pro_init, + .map_io = orion5x_map_io, + .init_irq = orion5x_init_irq, + .timer = &orion5x_timer, + .fixup = tag_fixup_mem32, +MACHINE_END +#endif + +#ifdef CONFIG_MACH_LINKSTATION_PRO +MACHINE_START(LINKSTATION_PRO, "Buffalo Linkstation Pro/Live") + /* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */ + .phys_io = ORION5X_REGS_PHYS_BASE, + .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC, + .boot_params = 0x00000100, + .init_machine = kurobox_pro_init, + .map_io = orion5x_map_io, + .init_irq = orion5x_init_irq, + .timer = &orion5x_timer, + .fixup = tag_fixup_mem32, +MACHINE_END +#endif diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c new file mode 100644 index 000000000000..fdf99fca85b3 --- /dev/null +++ b/arch/arm/mach-orion5x/pci.c @@ -0,0 +1,559 @@ +/* + * arch/arm/mach-orion5x/pci.c + * + * PCI and PCIe functions for Marvell Orion System On Chip + * + * Maintainer: Tzachi Perelstein <tzachi@marvell.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/mbus.h> +#include <asm/mach/pci.h> +#include <asm/plat-orion/pcie.h> +#include "common.h" + +/***************************************************************************** + * Orion has one PCIe controller and one PCI controller. + * + * Note1: The local PCIe bus number is '0'. The local PCI bus number + * follows the scanned PCIe bridged busses, if any. + * + * Note2: It is possible for PCI/PCIe agents to access many subsystem's + * space, by configuring BARs and Address Decode Windows, e.g. flashes on + * device bus, Orion registers, etc. However this code only enable the + * access to DDR banks. + ****************************************************************************/ + + +/***************************************************************************** + * PCIe controller + ****************************************************************************/ +#define PCIE_BASE ((void __iomem *)ORION5X_PCIE_VIRT_BASE) + +void __init orion5x_pcie_id(u32 *dev, u32 *rev) +{ + *dev = orion_pcie_dev_id(PCIE_BASE); + *rev = orion_pcie_rev(PCIE_BASE); +} + +int __init orion5x_pcie_local_bus_nr(void) +{ + return orion_pcie_get_local_bus_nr(PCIE_BASE); +} + +static int pcie_valid_config(int bus, int dev) +{ + /* + * Don't go out when trying to access -- + * 1. nonexisting device on local bus + * 2. where there's no device connected (no link) + */ + if (bus == 0 && dev == 0) + return 1; + + if (!orion_pcie_link_up(PCIE_BASE)) + return 0; + + if (bus == 0 && dev != 1) + return 0; + + return 1; +} + + +/* + * PCIe config cycles are done by programming the PCIE_CONF_ADDR register + * and then reading the PCIE_CONF_DATA register. Need to make sure these + * transactions are atomic. + */ +static DEFINE_SPINLOCK(orion5x_pcie_lock); + +static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where, + int size, u32 *val) +{ + unsigned long flags; + int ret; + + if (pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0) { + *val = 0xffffffff; + return PCIBIOS_DEVICE_NOT_FOUND; + } + + spin_lock_irqsave(&orion5x_pcie_lock, flags); + ret = orion_pcie_rd_conf(PCIE_BASE, bus, devfn, where, size, val); + spin_unlock_irqrestore(&orion5x_pcie_lock, flags); + + return ret; +} + +static int pcie_rd_conf_wa(struct pci_bus *bus, u32 devfn, + int where, int size, u32 *val) +{ + int ret; + + if (pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0) { + *val = 0xffffffff; + return PCIBIOS_DEVICE_NOT_FOUND; + } + + /* + * We only support access to the non-extended configuration + * space when using the WA access method (or we would have to + * sacrifice 256M of CPU virtual address space.) + */ + if (where >= 0x100) { + *val = 0xffffffff; + return PCIBIOS_DEVICE_NOT_FOUND; + } + + ret = orion_pcie_rd_conf_wa((void __iomem *)ORION5X_PCIE_WA_VIRT_BASE, + bus, devfn, where, size, val); + + return ret; +} + +static int pcie_wr_conf(struct pci_bus *bus, u32 devfn, + int where, int size, u32 val) +{ + unsigned long flags; + int ret; + + if (pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0) + return PCIBIOS_DEVICE_NOT_FOUND; + + spin_lock_irqsave(&orion5x_pcie_lock, flags); + ret = orion_pcie_wr_conf(PCIE_BASE, bus, devfn, where, size, val); + spin_unlock_irqrestore(&orion5x_pcie_lock, flags); + + return ret; +} + +static struct pci_ops pcie_ops = { + .read = pcie_rd_conf, + .write = pcie_wr_conf, +}; + + +static int __init pcie_setup(struct pci_sys_data *sys) +{ + struct resource *res; + int dev; + + /* + * Generic PCIe unit setup. + */ + orion_pcie_setup(PCIE_BASE, &orion5x_mbus_dram_info); + + /* + * Check whether to apply Orion-1/Orion-NAS PCIe config + * read transaction workaround. + */ + dev = orion_pcie_dev_id(PCIE_BASE); + if (dev == MV88F5181_DEV_ID || dev == MV88F5182_DEV_ID) { + printk(KERN_NOTICE "Applying Orion-1/Orion-NAS PCIe config " + "read transaction workaround\n"); + pcie_ops.read = pcie_rd_conf_wa; + } + + /* + * Request resources. + */ + res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL); + if (!res) + panic("pcie_setup unable to alloc resources"); + + /* + * IORESOURCE_IO + */ + res[0].name = "PCIe I/O Space"; + res[0].flags = IORESOURCE_IO; + res[0].start = ORION5X_PCIE_IO_BUS_BASE; + res[0].end = res[0].start + ORION5X_PCIE_IO_SIZE - 1; + if (request_resource(&ioport_resource, &res[0])) + panic("Request PCIe IO resource failed\n"); + sys->resource[0] = &res[0]; + + /* + * IORESOURCE_MEM + */ + res[1].name = "PCIe Memory Space"; + res[1].flags = IORESOURCE_MEM; + res[1].start = ORION5X_PCIE_MEM_PHYS_BASE; + res[1].end = res[1].start + ORION5X_PCIE_MEM_SIZE - 1; + if (request_resource(&iomem_resource, &res[1])) + panic("Request PCIe Memory resource failed\n"); + sys->resource[1] = &res[1]; + + sys->resource[2] = NULL; + sys->io_offset = 0; + + return 1; +} + +/***************************************************************************** + * PCI controller + ****************************************************************************/ +#define PCI_MODE ORION5X_PCI_REG(0xd00) +#define PCI_CMD ORION5X_PCI_REG(0xc00) +#define PCI_P2P_CONF ORION5X_PCI_REG(0x1d14) +#define PCI_CONF_ADDR ORION5X_PCI_REG(0xc78) +#define PCI_CONF_DATA ORION5X_PCI_REG(0xc7c) + +/* + * PCI_MODE bits + */ +#define PCI_MODE_64BIT (1 << 2) +#define PCI_MODE_PCIX ((1 << 4) | (1 << 5)) + +/* + * PCI_CMD bits + */ +#define PCI_CMD_HOST_REORDER (1 << 29) + +/* + * PCI_P2P_CONF bits + */ +#define PCI_P2P_BUS_OFFS 16 +#define PCI_P2P_BUS_MASK (0xff << PCI_P2P_BUS_OFFS) +#define PCI_P2P_DEV_OFFS 24 +#define PCI_P2P_DEV_MASK (0x1f << PCI_P2P_DEV_OFFS) + +/* + * PCI_CONF_ADDR bits + */ +#define PCI_CONF_REG(reg) ((reg) & 0xfc) +#define PCI_CONF_FUNC(func) (((func) & 0x3) << 8) +#define PCI_CONF_DEV(dev) (((dev) & 0x1f) << 11) +#define PCI_CONF_BUS(bus) (((bus) & 0xff) << 16) +#define PCI_CONF_ADDR_EN (1 << 31) + +/* + * Internal configuration space + */ +#define PCI_CONF_FUNC_STAT_CMD 0 +#define PCI_CONF_REG_STAT_CMD 4 +#define PCIX_STAT 0x64 +#define PCIX_STAT_BUS_OFFS 8 +#define PCIX_STAT_BUS_MASK (0xff << PCIX_STAT_BUS_OFFS) + +/* + * PCI Address Decode Windows registers + */ +#define PCI_BAR_SIZE_DDR_CS(n) (((n) == 0) ? ORION5X_PCI_REG(0xc08) : \ + ((n) == 1) ? ORION5X_PCI_REG(0xd08) : \ + ((n) == 2) ? ORION5X_PCI_REG(0xc0c) : \ + ((n) == 3) ? ORION5X_PCI_REG(0xd0c) : 0) +#define PCI_BAR_REMAP_DDR_CS(n) (((n) ==0) ? ORION5X_PCI_REG(0xc48) : \ + ((n) == 1) ? ORION5X_PCI_REG(0xd48) : \ + ((n) == 2) ? ORION5X_PCI_REG(0xc4c) : \ + ((n) == 3) ? ORION5X_PCI_REG(0xd4c) : 0) +#define PCI_BAR_ENABLE ORION5X_PCI_REG(0xc3c) +#define PCI_ADDR_DECODE_CTRL ORION5X_PCI_REG(0xd3c) + +/* + * PCI configuration helpers for BAR settings + */ +#define PCI_CONF_FUNC_BAR_CS(n) ((n) >> 1) +#define PCI_CONF_REG_BAR_LO_CS(n) (((n) & 1) ? 0x18 : 0x10) +#define PCI_CONF_REG_BAR_HI_CS(n) (((n) & 1) ? 0x1c : 0x14) + +/* + * PCI config cycles are done by programming the PCI_CONF_ADDR register + * and then reading the PCI_CONF_DATA register. Need to make sure these + * transactions are atomic. + */ +static DEFINE_SPINLOCK(orion5x_pci_lock); + +int orion5x_pci_local_bus_nr(void) +{ + u32 conf = orion5x_read(PCI_P2P_CONF); + return((conf & PCI_P2P_BUS_MASK) >> PCI_P2P_BUS_OFFS); +} + +static int orion5x_pci_hw_rd_conf(int bus, int dev, u32 func, + u32 where, u32 size, u32 *val) +{ + unsigned long flags; + spin_lock_irqsave(&orion5x_pci_lock, flags); + + orion5x_write(PCI_CONF_ADDR, PCI_CONF_BUS(bus) | + PCI_CONF_DEV(dev) | PCI_CONF_REG(where) | + PCI_CONF_FUNC(func) | PCI_CONF_ADDR_EN); + + *val = orion5x_read(PCI_CONF_DATA); + + if (size == 1) + *val = (*val >> (8*(where & 0x3))) & 0xff; + else if (size == 2) + *val = (*val >> (8*(where & 0x3))) & 0xffff; + + spin_unlock_irqrestore(&orion5x_pci_lock, flags); + + return PCIBIOS_SUCCESSFUL; +} + +static int orion5x_pci_hw_wr_conf(int bus, int dev, u32 func, + u32 where, u32 size, u32 val) +{ + unsigned long flags; + int ret = PCIBIOS_SUCCESSFUL; + + spin_lock_irqsave(&orion5x_pci_lock, flags); + + orion5x_write(PCI_CONF_ADDR, PCI_CONF_BUS(bus) | + PCI_CONF_DEV(dev) | PCI_CONF_REG(where) | + PCI_CONF_FUNC(func) | PCI_CONF_ADDR_EN); + + if (size == 4) { + __raw_writel(val, PCI_CONF_DATA); + } else if (size == 2) { + __raw_writew(val, PCI_CONF_DATA + (where & 0x3)); + } else if (size == 1) { + __raw_writeb(val, PCI_CONF_DATA + (where & 0x3)); + } else { + ret = PCIBIOS_BAD_REGISTER_NUMBER; + } + + spin_unlock_irqrestore(&orion5x_pci_lock, flags); + + return ret; +} + +static int orion5x_pci_rd_conf(struct pci_bus *bus, u32 devfn, + int where, int size, u32 *val) +{ + /* + * Don't go out for local device + */ + if (bus->number == orion5x_pci_local_bus_nr() && + PCI_SLOT(devfn) == 0 && PCI_FUNC(devfn) != 0) { + *val = 0xffffffff; + return PCIBIOS_DEVICE_NOT_FOUND; + } + + return orion5x_pci_hw_rd_conf(bus->number, PCI_SLOT(devfn), + PCI_FUNC(devfn), where, size, val); +} + +static int orion5x_pci_wr_conf(struct pci_bus *bus, u32 devfn, + int where, int size, u32 val) +{ + if (bus->number == orion5x_pci_local_bus_nr() && + PCI_SLOT(devfn) == 0 && PCI_FUNC(devfn) != 0) + return PCIBIOS_DEVICE_NOT_FOUND; + + return orion5x_pci_hw_wr_conf(bus->number, PCI_SLOT(devfn), + PCI_FUNC(devfn), where, size, val); +} + +static struct pci_ops pci_ops = { + .read = orion5x_pci_rd_conf, + .write = orion5x_pci_wr_conf, +}; + +static void __init orion5x_pci_set_bus_nr(int nr) +{ + u32 p2p = orion5x_read(PCI_P2P_CONF); + + if (orion5x_read(PCI_MODE) & PCI_MODE_PCIX) { + /* + * PCI-X mode + */ + u32 pcix_status, bus, dev; + bus = (p2p & PCI_P2P_BUS_MASK) >> PCI_P2P_BUS_OFFS; + dev = (p2p & PCI_P2P_DEV_MASK) >> PCI_P2P_DEV_OFFS; + orion5x_pci_hw_rd_conf(bus, dev, 0, PCIX_STAT, 4, &pcix_status); + pcix_status &= ~PCIX_STAT_BUS_MASK; + pcix_status |= (nr << PCIX_STAT_BUS_OFFS); + orion5x_pci_hw_wr_conf(bus, dev, 0, PCIX_STAT, 4, pcix_status); + } else { + /* + * PCI Conventional mode + */ + p2p &= ~PCI_P2P_BUS_MASK; + p2p |= (nr << PCI_P2P_BUS_OFFS); + orion5x_write(PCI_P2P_CONF, p2p); + } +} + +static void __init orion5x_pci_master_slave_enable(void) +{ + int bus_nr, func, reg; + u32 val; + + bus_nr = orion5x_pci_local_bus_nr(); + func = PCI_CONF_FUNC_STAT_CMD; + reg = PCI_CONF_REG_STAT_CMD; + orion5x_pci_hw_rd_conf(bus_nr, 0, func, reg, 4, &val); + val |= (PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); + orion5x_pci_hw_wr_conf(bus_nr, 0, func, reg, 4, val | 0x7); +} + +static void __init orion5x_setup_pci_wins(struct mbus_dram_target_info *dram) +{ + u32 win_enable; + int bus; + int i; + + /* + * First, disable windows. + */ + win_enable = 0xffffffff; + orion5x_write(PCI_BAR_ENABLE, win_enable); + + /* + * Setup windows for DDR banks. + */ + bus = orion5x_pci_local_bus_nr(); + + for (i = 0; i < dram->num_cs; i++) { + struct mbus_dram_window *cs = dram->cs + i; + u32 func = PCI_CONF_FUNC_BAR_CS(cs->cs_index); + u32 reg; + u32 val; + + /* + * Write DRAM bank base address register. + */ + reg = PCI_CONF_REG_BAR_LO_CS(cs->cs_index); + orion5x_pci_hw_rd_conf(bus, 0, func, reg, 4, &val); + val = (cs->base & 0xfffff000) | (val & 0xfff); + orion5x_pci_hw_wr_conf(bus, 0, func, reg, 4, val); + + /* + * Write DRAM bank size register. + */ + reg = PCI_CONF_REG_BAR_HI_CS(cs->cs_index); + orion5x_pci_hw_wr_conf(bus, 0, func, reg, 4, 0); + orion5x_write(PCI_BAR_SIZE_DDR_CS(cs->cs_index), + (cs->size - 1) & 0xfffff000); + orion5x_write(PCI_BAR_REMAP_DDR_CS(cs->cs_index), + cs->base & 0xfffff000); + + /* + * Enable decode window for this chip select. + */ + win_enable &= ~(1 << cs->cs_index); + } + + /* + * Re-enable decode windows. + */ + orion5x_write(PCI_BAR_ENABLE, win_enable); + + /* + * Disable automatic update of address remaping when writing to BARs. + */ + orion5x_setbits(PCI_ADDR_DECODE_CTRL, 1); +} + +static int __init pci_setup(struct pci_sys_data *sys) +{ + struct resource *res; + + /* + * Point PCI unit MBUS decode windows to DRAM space. + */ + orion5x_setup_pci_wins(&orion5x_mbus_dram_info); + + /* + * Master + Slave enable + */ + orion5x_pci_master_slave_enable(); + + /* + * Force ordering + */ + orion5x_setbits(PCI_CMD, PCI_CMD_HOST_REORDER); + + /* + * Request resources + */ + res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL); + if (!res) + panic("pci_setup unable to alloc resources"); + + /* + * IORESOURCE_IO + */ + res[0].name = "PCI I/O Space"; + res[0].flags = IORESOURCE_IO; + res[0].start = ORION5X_PCI_IO_BUS_BASE; + res[0].end = res[0].start + ORION5X_PCI_IO_SIZE - 1; + if (request_resource(&ioport_resource, &res[0])) + panic("Request PCI IO resource failed\n"); + sys->resource[0] = &res[0]; + + /* + * IORESOURCE_MEM + */ + res[1].name = "PCI Memory Space"; + res[1].flags = IORESOURCE_MEM; + res[1].start = ORION5X_PCI_MEM_PHYS_BASE; + res[1].end = res[1].start + ORION5X_PCI_MEM_SIZE - 1; + if (request_resource(&iomem_resource, &res[1])) + panic("Request PCI Memory resource failed\n"); + sys->resource[1] = &res[1]; + + sys->resource[2] = NULL; + sys->io_offset = 0; + + return 1; +} + + +/***************************************************************************** + * General PCIe + PCI + ****************************************************************************/ +static void __devinit rc_pci_fixup(struct pci_dev *dev) +{ + /* + * Prevent enumeration of root complex. + */ + if (dev->bus->parent == NULL && dev->devfn == 0) { + int i; + + for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { + dev->resource[i].start = 0; + dev->resource[i].end = 0; + dev->resource[i].flags = 0; + } + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup); + +int __init orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys) +{ + int ret = 0; + + if (nr == 0) { + orion_pcie_set_local_bus_nr(PCIE_BASE, sys->busnr); + ret = pcie_setup(sys); + } else if (nr == 1) { + orion5x_pci_set_bus_nr(sys->busnr); + ret = pci_setup(sys); + } + + return ret; +} + +struct pci_bus __init *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys) +{ + struct pci_bus *bus; + + if (nr == 0) { + bus = pci_scan_bus(sys->busnr, &pcie_ops, sys); + } else if (nr == 1) { + bus = pci_scan_bus(sys->busnr, &pci_ops, sys); + } else { + bus = NULL; + BUG(); + } + + return bus; +} diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c new file mode 100644 index 000000000000..37e8b2dc3ed5 --- /dev/null +++ b/arch/arm/mach-orion5x/rd88f5182-setup.c @@ -0,0 +1,312 @@ +/* + * arch/arm/mach-orion5x/rd88f5182-setup.c + * + * Marvell Orion-NAS Reference Design Setup + * + * Maintainer: Ronen Shitrit <rshitrit@marvell.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/pci.h> +#include <linux/irq.h> +#include <linux/mtd/physmap.h> +#include <linux/mv643xx_eth.h> +#include <linux/ata_platform.h> +#include <linux/i2c.h> +#include <asm/mach-types.h> +#include <asm/gpio.h> +#include <asm/leds.h> +#include <asm/mach/arch.h> +#include <asm/mach/pci.h> +#include <asm/arch/orion5x.h> +#include "common.h" + +/***************************************************************************** + * RD-88F5182 Info + ****************************************************************************/ + +/* + * 512K NOR flash Device bus boot chip select + */ + +#define RD88F5182_NOR_BOOT_BASE 0xf4000000 +#define RD88F5182_NOR_BOOT_SIZE SZ_512K + +/* + * 16M NOR flash on Device bus chip select 1 + */ + +#define RD88F5182_NOR_BASE 0xfc000000 +#define RD88F5182_NOR_SIZE SZ_16M + +/* + * PCI + */ + +#define RD88F5182_PCI_SLOT0_OFFS 7 +#define RD88F5182_PCI_SLOT0_IRQ_A_PIN 7 +#define RD88F5182_PCI_SLOT0_IRQ_B_PIN 6 + +/* + * GPIO Debug LED + */ + +#define RD88F5182_GPIO_DBG_LED 0 + +/***************************************************************************** + * 16M NOR Flash on Device bus CS1 + ****************************************************************************/ + +static struct physmap_flash_data rd88f5182_nor_flash_data = { + .width = 1, +}; + +static struct resource rd88f5182_nor_flash_resource = { + .flags = IORESOURCE_MEM, + .start = RD88F5182_NOR_BASE, + .end = RD88F5182_NOR_BASE + RD88F5182_NOR_SIZE - 1, +}; + +static struct platform_device rd88f5182_nor_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &rd88f5182_nor_flash_data, + }, + .num_resources = 1, + .resource = &rd88f5182_nor_flash_resource, +}; + +#ifdef CONFIG_LEDS + +/***************************************************************************** + * Use GPIO debug led as CPU active indication + ****************************************************************************/ + +static void rd88f5182_dbgled_event(led_event_t evt) +{ + int val; + + if (evt == led_idle_end) + val = 1; + else if (evt == led_idle_start) + val = 0; + else + return; + + gpio_set_value(RD88F5182_GPIO_DBG_LED, val); +} + +static int __init rd88f5182_dbgled_init(void) +{ + int pin; + + if (machine_is_rd88f5182()) { + pin = RD88F5182_GPIO_DBG_LED; + + if (gpio_request(pin, "DBGLED") == 0) { + if (gpio_direction_output(pin, 0) != 0) { + printk(KERN_ERR "rd88f5182_dbgled_init failed " + "to set output pin %d\n", pin); + gpio_free(pin); + return 0; + } + } else { + printk(KERN_ERR "rd88f5182_dbgled_init failed " + "to request gpio %d\n", pin); + return 0; + } + + leds_event = rd88f5182_dbgled_event; + } + return 0; +} + +__initcall(rd88f5182_dbgled_init); + +#endif + +/***************************************************************************** + * PCI + ****************************************************************************/ + +void __init rd88f5182_pci_preinit(void) +{ + int pin; + + /* + * Configure PCI GPIO IRQ pins + */ + pin = RD88F5182_PCI_SLOT0_IRQ_A_PIN; + if (gpio_request(pin, "PCI IntA") == 0) { + if (gpio_direction_input(pin) == 0) { + set_irq_type(gpio_to_irq(pin), IRQT_LOW); + } else { + printk(KERN_ERR "rd88f5182_pci_preinit faield to " + "set_irq_type pin %d\n", pin); + gpio_free(pin); + } + } else { + printk(KERN_ERR "rd88f5182_pci_preinit failed to request gpio %d\n", pin); + } + + pin = RD88F5182_PCI_SLOT0_IRQ_B_PIN; + if (gpio_request(pin, "PCI IntB") == 0) { + if (gpio_direction_input(pin) == 0) { + set_irq_type(gpio_to_irq(pin), IRQT_LOW); + } else { + printk(KERN_ERR "rd88f5182_pci_preinit faield to " + "set_irq_type pin %d\n", pin); + gpio_free(pin); + } + } else { + printk(KERN_ERR "rd88f5182_pci_preinit failed to gpio_request %d\n", pin); + } +} + +static int __init rd88f5182_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + /* + * PCI-E isn't used on the RD2 + */ + if (dev->bus->number == orion5x_pcie_local_bus_nr()) + return IRQ_ORION5X_PCIE0_INT; + + /* + * PCI IRQs are connected via GPIOs + */ + switch (slot - RD88F5182_PCI_SLOT0_OFFS) { + case 0: + if (pin == 1) + return gpio_to_irq(RD88F5182_PCI_SLOT0_IRQ_A_PIN); + else + return gpio_to_irq(RD88F5182_PCI_SLOT0_IRQ_B_PIN); + default: + return -1; + } +} + +static struct hw_pci rd88f5182_pci __initdata = { + .nr_controllers = 2, + .preinit = rd88f5182_pci_preinit, + .swizzle = pci_std_swizzle, + .setup = orion5x_pci_sys_setup, + .scan = orion5x_pci_sys_scan_bus, + .map_irq = rd88f5182_pci_map_irq, +}; + +static int __init rd88f5182_pci_init(void) +{ + if (machine_is_rd88f5182()) + pci_common_init(&rd88f5182_pci); + + return 0; +} + +subsys_initcall(rd88f5182_pci_init); + +/***************************************************************************** + * Ethernet + ****************************************************************************/ + +static struct mv643xx_eth_platform_data rd88f5182_eth_data = { + .phy_addr = 8, + .force_phy_addr = 1, +}; + +/***************************************************************************** + * RTC DS1338 on I2C bus + ****************************************************************************/ +static struct i2c_board_info __initdata rd88f5182_i2c_rtc = { + .driver_name = "rtc-ds1307", + .type = "ds1338", + .addr = 0x68, +}; + +/***************************************************************************** + * Sata + ****************************************************************************/ +static struct mv_sata_platform_data rd88f5182_sata_data = { + .n_ports = 2, +}; + +/***************************************************************************** + * General Setup + ****************************************************************************/ + +static struct platform_device *rd88f5182_devices[] __initdata = { + &rd88f5182_nor_flash, +}; + +static void __init rd88f5182_init(void) +{ + /* + * Setup basic Orion functions. Need to be called early. + */ + orion5x_init(); + + /* + * Setup the CPU address decode windows for our devices + */ + orion5x_setup_dev_boot_win(RD88F5182_NOR_BOOT_BASE, + RD88F5182_NOR_BOOT_SIZE); + orion5x_setup_dev1_win(RD88F5182_NOR_BASE, RD88F5182_NOR_SIZE); + + /* + * Open a special address decode windows for the PCIE WA. + */ + orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE, + ORION5X_PCIE_WA_SIZE); + + /* + * Setup Multiplexing Pins -- + * MPP[0] Debug Led (GPIO - Out) + * MPP[1] Debug Led (GPIO - Out) + * MPP[2] N/A + * MPP[3] RTC_Int (GPIO - In) + * MPP[4] GPIO + * MPP[5] GPIO + * MPP[6] PCI_intA (GPIO - In) + * MPP[7] PCI_intB (GPIO - In) + * MPP[8-11] N/A + * MPP[12] SATA 0 presence Indication + * MPP[13] SATA 1 presence Indication + * MPP[14] SATA 0 active Indication + * MPP[15] SATA 1 active indication + * MPP[16-19] Not used + * MPP[20] PCI Clock to MV88F5182 + * MPP[21] PCI Clock to mini PCI CON11 + * MPP[22] USB 0 over current indication + * MPP[23] USB 1 over current indication + * MPP[24] USB 1 over current enable + * MPP[25] USB 0 over current enable + */ + + orion5x_write(MPP_0_7_CTRL, 0x00000003); + orion5x_write(MPP_8_15_CTRL, 0x55550000); + orion5x_write(MPP_16_19_CTRL, 0x5555); + + orion5x_gpio_set_valid_pins(0x000000fb); + + platform_add_devices(rd88f5182_devices, ARRAY_SIZE(rd88f5182_devices)); + i2c_register_board_info(0, &rd88f5182_i2c_rtc, 1); + orion5x_eth_init(&rd88f5182_eth_data); + orion5x_sata_init(&rd88f5182_sata_data); +} + +MACHINE_START(RD88F5182, "Marvell Orion-NAS Reference Design") + /* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */ + .phys_io = ORION5X_REGS_PHYS_BASE, + .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC, + .boot_params = 0x00000100, + .init_machine = rd88f5182_init, + .map_io = orion5x_map_io, + .init_irq = orion5x_init_irq, + .timer = &orion5x_timer, +MACHINE_END diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c new file mode 100644 index 000000000000..fd43863a86f6 --- /dev/null +++ b/arch/arm/mach-orion5x/ts209-setup.c @@ -0,0 +1,442 @@ +/* + * QNAP TS-109/TS-209 Board Setup + * + * Maintainer: Byron Bradley <byron.bbradley@gmail.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/pci.h> +#include <linux/irq.h> +#include <linux/mtd/physmap.h> +#include <linux/mtd/nand.h> +#include <linux/mv643xx_eth.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> +#include <linux/i2c.h> +#include <linux/serial_reg.h> +#include <linux/ata_platform.h> +#include <asm/mach-types.h> +#include <asm/gpio.h> +#include <asm/mach/arch.h> +#include <asm/mach/pci.h> +#include <asm/arch/orion5x.h> +#include "common.h" + +#define QNAP_TS209_NOR_BOOT_BASE 0xf4000000 +#define QNAP_TS209_NOR_BOOT_SIZE SZ_8M + +/**************************************************************************** + * 8MiB NOR flash. The struct mtd_partition is not in the same order as the + * partitions on the device because we want to keep compatability with + * existing QNAP firmware. + * + * Layout as used by QNAP: + * [2] 0x00000000-0x00200000 : "Kernel" + * [3] 0x00200000-0x00600000 : "RootFS1" + * [4] 0x00600000-0x00700000 : "RootFS2" + * [6] 0x00700000-0x00760000 : "NAS Config" (read-only) + * [5] 0x00760000-0x00780000 : "U-Boot Config" + * [1] 0x00780000-0x00800000 : "U-Boot" (read-only) + ***************************************************************************/ +static struct mtd_partition qnap_ts209_partitions[] = { + { + .name = "U-Boot", + .size = 0x00080000, + .offset = 0x00780000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "Kernel", + .size = 0x00200000, + .offset = 0, + }, { + .name = "RootFS1", + .size = 0x00400000, + .offset = 0x00200000, + }, { + .name = "RootFS2", + .size = 0x00100000, + .offset = 0x00600000, + }, { + .name = "U-Boot Config", + .size = 0x00020000, + .offset = 0x00760000, + }, { + .name = "NAS Config", + .size = 0x00060000, + .offset = 0x00700000, + .mask_flags = MTD_WRITEABLE, + } +}; + +static struct physmap_flash_data qnap_ts209_nor_flash_data = { + .width = 1, + .parts = qnap_ts209_partitions, + .nr_parts = ARRAY_SIZE(qnap_ts209_partitions) +}; + +static struct resource qnap_ts209_nor_flash_resource = { + .flags = IORESOURCE_MEM, + .start = QNAP_TS209_NOR_BOOT_BASE, + .end = QNAP_TS209_NOR_BOOT_BASE + QNAP_TS209_NOR_BOOT_SIZE - 1, +}; + +static struct platform_device qnap_ts209_nor_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { .platform_data = &qnap_ts209_nor_flash_data, }, + .resource = &qnap_ts209_nor_flash_resource, + .num_resources = 1, +}; + +/***************************************************************************** + * PCI + ****************************************************************************/ + +#define QNAP_TS209_PCI_SLOT0_OFFS 7 +#define QNAP_TS209_PCI_SLOT0_IRQ_PIN 6 +#define QNAP_TS209_PCI_SLOT1_IRQ_PIN 7 + +void __init qnap_ts209_pci_preinit(void) +{ + int pin; + + /* + * Configure PCI GPIO IRQ pins + */ + pin = QNAP_TS209_PCI_SLOT0_IRQ_PIN; + if (gpio_request(pin, "PCI Int1") == 0) { + if (gpio_direction_input(pin) == 0) { + set_irq_type(gpio_to_irq(pin), IRQT_LOW); + } else { + printk(KERN_ERR "qnap_ts209_pci_preinit failed to " + "set_irq_type pin %d\n", pin); + gpio_free(pin); + } + } else { + printk(KERN_ERR "qnap_ts209_pci_preinit failed to gpio_request " + "%d\n", pin); + } + + pin = QNAP_TS209_PCI_SLOT1_IRQ_PIN; + if (gpio_request(pin, "PCI Int2") == 0) { + if (gpio_direction_input(pin) == 0) { + set_irq_type(gpio_to_irq(pin), IRQT_LOW); + } else { + printk(KERN_ERR "qnap_ts209_pci_preinit failed " + "to set_irq_type pin %d\n", pin); + gpio_free(pin); + } + } else { + printk(KERN_ERR "qnap_ts209_pci_preinit failed to gpio_request " + "%d\n", pin); + } +} + +static int __init qnap_ts209_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + /* + * PCIE IRQ is connected internally (not GPIO) + */ + if (dev->bus->number == orion5x_pcie_local_bus_nr()) + return IRQ_ORION5X_PCIE0_INT; + + /* + * PCI IRQs are connected via GPIOs + */ + switch (slot - QNAP_TS209_PCI_SLOT0_OFFS) { + case 0: + return gpio_to_irq(QNAP_TS209_PCI_SLOT0_IRQ_PIN); + case 1: + return gpio_to_irq(QNAP_TS209_PCI_SLOT1_IRQ_PIN); + default: + return -1; + } +} + +static struct hw_pci qnap_ts209_pci __initdata = { + .nr_controllers = 2, + .preinit = qnap_ts209_pci_preinit, + .swizzle = pci_std_swizzle, + .setup = orion5x_pci_sys_setup, + .scan = orion5x_pci_sys_scan_bus, + .map_irq = qnap_ts209_pci_map_irq, +}; + +static int __init qnap_ts209_pci_init(void) +{ + if (machine_is_ts_x09()) + pci_common_init(&qnap_ts209_pci); + + return 0; +} + +subsys_initcall(qnap_ts209_pci_init); + +/***************************************************************************** + * Ethernet + ****************************************************************************/ + +static struct mv643xx_eth_platform_data qnap_ts209_eth_data = { + .phy_addr = 8, + .force_phy_addr = 1, +}; + +static int __init parse_hex_nibble(char n) +{ + if (n >= '0' && n <= '9') + return n - '0'; + + if (n >= 'A' && n <= 'F') + return n - 'A' + 10; + + if (n >= 'a' && n <= 'f') + return n - 'a' + 10; + + return -1; +} + +static int __init parse_hex_byte(const char *b) +{ + int hi; + int lo; + + hi = parse_hex_nibble(b[0]); + lo = parse_hex_nibble(b[1]); + + if (hi < 0 || lo < 0) + return -1; + + return (hi << 4) | lo; +} + +static int __init check_mac_addr(const char *addr_str) +{ + u_int8_t addr[6]; + int i; + + for (i = 0; i < 6; i++) { + int byte; + + /* + * Enforce "xx:xx:xx:xx:xx:xx\n" format. + */ + if (addr_str[(i * 3) + 2] != ((i < 5) ? ':' : '\n')) + return -1; + + byte = parse_hex_byte(addr_str + (i * 3)); + if (byte < 0) + return -1; + addr[i] = byte; + } + + printk(KERN_INFO "ts209: found ethernet mac address "); + for (i = 0; i < 6; i++) + printk("%.2x%s", addr[i], (i < 5) ? ":" : ".\n"); + + memcpy(qnap_ts209_eth_data.mac_addr, addr, 6); + + return 0; +} + +/* + * The 'NAS Config' flash partition has an ext2 filesystem which + * contains a file that has the ethernet MAC address in plain text + * (format "xx:xx:xx:xx:xx:xx\n".) + */ +static void __init ts209_find_mac_addr(void) +{ + unsigned long addr; + + for (addr = 0x00700000; addr < 0x00760000; addr += 1024) { + char *nor_page; + int ret = 0; + + nor_page = ioremap(QNAP_TS209_NOR_BOOT_BASE + addr, 1024); + if (nor_page != NULL) { + ret = check_mac_addr(nor_page); + iounmap(nor_page); + } + + if (ret == 0) + break; + } +} + +/***************************************************************************** + * RTC S35390A on I2C bus + ****************************************************************************/ + +#define TS209_RTC_GPIO 3 + +static struct i2c_board_info __initdata qnap_ts209_i2c_rtc = { + .driver_name = "rtc-s35390a", + .addr = 0x30, + .irq = 0, +}; + +/**************************************************************************** + * GPIO Attached Keys + * Power button is attached to the PIC microcontroller + ****************************************************************************/ + +#define QNAP_TS209_GPIO_KEY_MEDIA 1 +#define QNAP_TS209_GPIO_KEY_RESET 2 + +static struct gpio_keys_button qnap_ts209_buttons[] = { + { + .code = KEY_RESTART, + .gpio = QNAP_TS209_GPIO_KEY_MEDIA, + .desc = "USB Copy Button", + .active_low = 1, + }, + { + .code = KEY_POWER, + .gpio = QNAP_TS209_GPIO_KEY_RESET, + .desc = "Reset Button", + .active_low = 1, + } +}; + +static struct gpio_keys_platform_data qnap_ts209_button_data = { + .buttons = qnap_ts209_buttons, + .nbuttons = ARRAY_SIZE(qnap_ts209_buttons), +}; + +static struct platform_device qnap_ts209_button_device = { + .name = "gpio-keys", + .id = -1, + .num_resources = 0, + .dev = { .platform_data = &qnap_ts209_button_data, }, +}; + +/***************************************************************************** + * SATA + ****************************************************************************/ +static struct mv_sata_platform_data qnap_ts209_sata_data = { + .n_ports = 2, +}; + +/***************************************************************************** + + * General Setup + ****************************************************************************/ + +static struct platform_device *qnap_ts209_devices[] __initdata = { + &qnap_ts209_nor_flash, + &qnap_ts209_button_device, +}; + +/* + * QNAP TS-[12]09 specific power off method via UART1-attached PIC + */ + +#define UART1_REG(x) (UART1_VIRT_BASE + ((UART_##x) << 2)) + +static void qnap_ts209_power_off(void) +{ + /* 19200 baud divisor */ + const unsigned divisor = ((ORION5X_TCLK + (8 * 19200)) / (16 * 19200)); + + pr_info("%s: triggering power-off...\n", __func__); + + /* hijack uart1 and reset into sane state (19200,8n1) */ + orion5x_write(UART1_REG(LCR), 0x83); + orion5x_write(UART1_REG(DLL), divisor & 0xff); + orion5x_write(UART1_REG(DLM), (divisor >> 8) & 0xff); + orion5x_write(UART1_REG(LCR), 0x03); + orion5x_write(UART1_REG(IER), 0x00); + orion5x_write(UART1_REG(FCR), 0x00); + orion5x_write(UART1_REG(MCR), 0x00); + + /* send the power-off command 'A' to PIC */ + orion5x_write(UART1_REG(TX), 'A'); +} + +static void __init qnap_ts209_init(void) +{ + /* + * Setup basic Orion functions. Need to be called early. + */ + orion5x_init(); + + /* + * Setup flash mapping + */ + orion5x_setup_dev_boot_win(QNAP_TS209_NOR_BOOT_BASE, + QNAP_TS209_NOR_BOOT_SIZE); + + /* + * Open a special address decode windows for the PCIE WA. + */ + orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE, + ORION5X_PCIE_WA_SIZE); + + /* + * Setup Multiplexing Pins -- + * MPP[0] Reserved + * MPP[1] USB copy button (0 active) + * MPP[2] Load defaults button (0 active) + * MPP[3] GPIO RTC + * MPP[4-5] Reserved + * MPP[6] PCI Int A + * MPP[7] PCI Int B + * MPP[8-11] Reserved + * MPP[12] SATA 0 presence + * MPP[13] SATA 1 presence + * MPP[14] SATA 0 active + * MPP[15] SATA 1 active + * MPP[16] UART1 RXD + * MPP[17] UART1 TXD + * MPP[18] SW_RST (0 active) + * MPP[19] Reserved + * MPP[20] PCI clock 0 + * MPP[21] PCI clock 1 + * MPP[22] USB 0 over current + * MPP[23-25] Reserved + */ + orion5x_write(MPP_0_7_CTRL, 0x3); + orion5x_write(MPP_8_15_CTRL, 0x55550000); + orion5x_write(MPP_16_19_CTRL, 0x5500); + orion5x_gpio_set_valid_pins(0x3cc0fff); + + /* register ts209 specific power-off method */ + pm_power_off = qnap_ts209_power_off; + + platform_add_devices(qnap_ts209_devices, + ARRAY_SIZE(qnap_ts209_devices)); + + /* Get RTC IRQ and register the chip */ + if (gpio_request(TS209_RTC_GPIO, "rtc") == 0) { + if (gpio_direction_input(TS209_RTC_GPIO) == 0) + qnap_ts209_i2c_rtc.irq = gpio_to_irq(TS209_RTC_GPIO); + else + gpio_free(TS209_RTC_GPIO); + } + if (qnap_ts209_i2c_rtc.irq == 0) + pr_warning("qnap_ts209_init: failed to get RTC IRQ\n"); + i2c_register_board_info(0, &qnap_ts209_i2c_rtc, 1); + + ts209_find_mac_addr(); + orion5x_eth_init(&qnap_ts209_eth_data); + + orion5x_sata_init(&qnap_ts209_sata_data); +} + +MACHINE_START(TS209, "QNAP TS-109/TS-209") + /* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */ + .phys_io = ORION5X_REGS_PHYS_BASE, + .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC, + .boot_params = 0x00000100, + .init_machine = qnap_ts209_init, + .map_io = orion5x_map_io, + .init_irq = orion5x_init_irq, + .timer = &orion5x_timer, + .fixup = tag_fixup_mem32, +MACHINE_END |