diff options
Diffstat (limited to 'arch/arm/plat-samsung')
| -rw-r--r-- | arch/arm/plat-samsung/Kconfig | 21 | ||||
| -rw-r--r-- | arch/arm/plat-samsung/Makefile | 5 | ||||
| -rw-r--r-- | arch/arm/plat-samsung/dev-backlight.c | 61 | ||||
| -rw-r--r-- | arch/arm/plat-samsung/devs.c | 42 | ||||
| -rw-r--r-- | arch/arm/plat-samsung/include/plat/clock.h | 9 | ||||
| -rw-r--r-- | arch/arm/plat-samsung/include/plat/devs.h | 1 | ||||
| -rw-r--r-- | arch/arm/plat-samsung/include/plat/irq-vic-timer.h | 13 | ||||
| -rw-r--r-- | arch/arm/plat-samsung/include/plat/irqs.h | 9 | ||||
| -rw-r--r-- | arch/arm/plat-samsung/include/plat/pm.h | 8 | ||||
| -rw-r--r-- | arch/arm/plat-samsung/include/plat/pwm-clock.h | 81 | ||||
| -rw-r--r-- | arch/arm/plat-samsung/include/plat/pwm-core.h | 22 | ||||
| -rw-r--r-- | arch/arm/plat-samsung/include/plat/regs-timer.h | 124 | ||||
| -rw-r--r-- | arch/arm/plat-samsung/include/plat/samsung-time.h | 23 | ||||
| -rw-r--r-- | arch/arm/plat-samsung/irq-vic-timer.c | 98 | ||||
| -rw-r--r-- | arch/arm/plat-samsung/pm.c | 14 | ||||
| -rw-r--r-- | arch/arm/plat-samsung/pwm-clock.c | 474 | ||||
| -rw-r--r-- | arch/arm/plat-samsung/s5p-irq.c | 4 | ||||
| -rw-r--r-- | arch/arm/plat-samsung/samsung-time.c | 394 |
18 files changed, 86 insertions, 1317 deletions
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index 3dc5cbea86cc..7dfba937d8fc 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -25,10 +25,16 @@ config PLAT_S5P select S5P_GPIO_DRVSTR select SAMSUNG_CLKSRC if !COMMON_CLK select SAMSUNG_GPIOLIB_4BIT - select SAMSUNG_IRQ_VIC_TIMER help Base platform code for Samsung's S5P series SoC. +config SAMSUNG_PM + bool + depends on PM && (PLAT_S3C24XX || ARCH_S3C64XX || ARCH_S5P64X0 || S5P_PM) + default y + help + Base platform power management code for samsung code + if PLAT_SAMSUNG # boot configurations @@ -72,14 +78,6 @@ config SAMSUNG_ATAGS if SAMSUNG_ATAGS -# timer options - -config SAMSUNG_HRT - bool - select SAMSUNG_DEV_PWM - help - Use the High Resolution timer support - # clock options config SAMSUNG_CLOCK @@ -99,11 +97,6 @@ config S5P_CLOCK # options for IRQ support -config SAMSUNG_IRQ_VIC_TIMER - bool - help - Internal configuration to build the VIC timer interrupt code. - config S5P_IRQ def_bool (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210) help diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile index 98d07d8fc7a7..498c7c23e9f4 100644 --- a/arch/arm/plat-samsung/Makefile +++ b/arch/arm/plat-samsung/Makefile @@ -12,15 +12,12 @@ obj- := # Objects we always build independent of SoC choice obj-y += init.o cpu.o -obj-$(CONFIG_SAMSUNG_HRT) += samsung-time.o obj-$(CONFIG_SAMSUNG_CLOCK) += clock.o -obj-$(CONFIG_SAMSUNG_CLOCK) += pwm-clock.o obj-$(CONFIG_SAMSUNG_CLKSRC) += clock-clksrc.o obj-$(CONFIG_S5P_CLOCK) += s5p-clock.o -obj-$(CONFIG_SAMSUNG_IRQ_VIC_TIMER) += irq-vic-timer.o obj-$(CONFIG_S5P_IRQ) += s5p-irq.o obj-$(CONFIG_S5P_EXT_INT) += s5p-irq-eint.o obj-$(CONFIG_S5P_GPIO_INT) += s5p-irq-gpioint.o @@ -51,7 +48,7 @@ obj-$(CONFIG_SAMSUNG_DMADEV) += dma-ops.o # PM support -obj-$(CONFIG_PM) += pm.o +obj-$(CONFIG_SAMSUNG_PM) += pm.o obj-$(CONFIG_SAMSUNG_PM_GPIO) += pm-gpio.o obj-$(CONFIG_SAMSUNG_PM_CHECK) += pm-check.o diff --git a/arch/arm/plat-samsung/dev-backlight.c b/arch/arm/plat-samsung/dev-backlight.c index 5f197dcaf10c..d51f9565567c 100644 --- a/arch/arm/plat-samsung/dev-backlight.c +++ b/arch/arm/plat-samsung/dev-backlight.c @@ -20,13 +20,18 @@ #include <plat/gpio-cfg.h> #include <plat/backlight.h> +struct samsung_bl_drvdata { + struct platform_pwm_backlight_data plat_data; + struct samsung_bl_gpio_info *gpio_info; +}; + static int samsung_bl_init(struct device *dev) { int ret = 0; - struct platform_device *timer_dev = - container_of(dev->parent, struct platform_device, dev); - struct samsung_bl_gpio_info *bl_gpio_info = - timer_dev->dev.platform_data; + struct platform_pwm_backlight_data *pdata = dev->platform_data; + struct samsung_bl_drvdata *drvdata = container_of(pdata, + struct samsung_bl_drvdata, plat_data); + struct samsung_bl_gpio_info *bl_gpio_info = drvdata->gpio_info; ret = gpio_request(bl_gpio_info->no, "Backlight"); if (ret) { @@ -42,10 +47,10 @@ static int samsung_bl_init(struct device *dev) static void samsung_bl_exit(struct device *dev) { - struct platform_device *timer_dev = - container_of(dev->parent, struct platform_device, dev); - struct samsung_bl_gpio_info *bl_gpio_info = - timer_dev->dev.platform_data; + struct platform_pwm_backlight_data *pdata = dev->platform_data; + struct samsung_bl_drvdata *drvdata = container_of(pdata, + struct samsung_bl_drvdata, plat_data); + struct samsung_bl_gpio_info *bl_gpio_info = drvdata->gpio_info; s3c_gpio_cfgpin(bl_gpio_info->no, S3C_GPIO_OUTPUT); gpio_free(bl_gpio_info->no); @@ -60,12 +65,14 @@ static void samsung_bl_exit(struct device *dev) * for their specific boards */ -static struct platform_pwm_backlight_data samsung_dfl_bl_data __initdata = { - .max_brightness = 255, - .dft_brightness = 255, - .pwm_period_ns = 78770, - .init = samsung_bl_init, - .exit = samsung_bl_exit, +static struct samsung_bl_drvdata samsung_dfl_bl_data __initdata = { + .plat_data = { + .max_brightness = 255, + .dft_brightness = 255, + .pwm_period_ns = 78770, + .init = samsung_bl_init, + .exit = samsung_bl_exit, + }, }; static struct platform_device samsung_dfl_bl_device __initdata = { @@ -82,6 +89,7 @@ void __init samsung_bl_set(struct samsung_bl_gpio_info *gpio_info, { int ret = 0; struct platform_device *samsung_bl_device; + struct samsung_bl_drvdata *samsung_bl_drvdata; struct platform_pwm_backlight_data *samsung_bl_data; samsung_bl_device = kmemdup(&samsung_dfl_bl_device, @@ -91,17 +99,19 @@ void __init samsung_bl_set(struct samsung_bl_gpio_info *gpio_info, return; } - samsung_bl_data = s3c_set_platdata(&samsung_dfl_bl_data, - sizeof(struct platform_pwm_backlight_data), samsung_bl_device); - if (!samsung_bl_data) { + samsung_bl_drvdata = kmemdup(&samsung_dfl_bl_data, + sizeof(samsung_dfl_bl_data), GFP_KERNEL); + if (!samsung_bl_drvdata) { printk(KERN_ERR "%s: no memory for platform dev\n", __func__); goto err_data; } + samsung_bl_device->dev.platform_data = &samsung_bl_drvdata->plat_data; + samsung_bl_drvdata->gpio_info = gpio_info; + samsung_bl_data = &samsung_bl_drvdata->plat_data; /* Copy board specific data provided by user */ samsung_bl_data->pwm_id = bl_data->pwm_id; - samsung_bl_device->dev.parent = - &s3c_device_timer[samsung_bl_data->pwm_id].dev; + samsung_bl_device->dev.parent = &samsung_device_pwm.dev; if (bl_data->max_brightness) samsung_bl_data->max_brightness = bl_data->max_brightness; @@ -122,17 +132,6 @@ void __init samsung_bl_set(struct samsung_bl_gpio_info *gpio_info, if (bl_data->check_fb) samsung_bl_data->check_fb = bl_data->check_fb; - /* Keep the GPIO info for future use */ - s3c_device_timer[samsung_bl_data->pwm_id].dev.platform_data = gpio_info; - - /* Register the specific PWM timer dev for Backlight control */ - ret = platform_device_register( - &s3c_device_timer[samsung_bl_data->pwm_id]); - if (ret) { - printk(KERN_ERR "failed to register pwm timer for backlight: %d\n", ret); - goto err_plat_reg1; - } - /* Register the Backlight dev */ ret = platform_device_register(samsung_bl_device); if (ret) { @@ -143,8 +142,6 @@ void __init samsung_bl_set(struct samsung_bl_gpio_info *gpio_info, return; err_plat_reg2: - platform_device_unregister(&s3c_device_timer[samsung_bl_data->pwm_id]); -err_plat_reg1: kfree(samsung_bl_data); err_data: kfree(samsung_bl_device); diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index 0f9c3f431a5f..8ce0ac007eb9 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -58,6 +58,7 @@ #include <plat/keypad.h> #include <linux/platform_data/mmc-s3cmci.h> #include <linux/platform_data/mtd-nand-s3c2410.h> +#include <plat/pwm-core.h> #include <plat/sdhci.h> #include <linux/platform_data/touchscreen-s3c2410.h> #include <linux/platform_data/usb-s3c2410_udc.h> @@ -1097,36 +1098,21 @@ arch_initcall(s5p_pmu_init); /* PWM Timer */ #ifdef CONFIG_SAMSUNG_DEV_PWM +static struct resource samsung_pwm_resource[] = { + DEFINE_RES_MEM(SAMSUNG_PA_TIMER, SZ_4K), +}; -#define TIMER_RESOURCE_SIZE (1) - -#define TIMER_RESOURCE(_tmr, _irq) \ - (struct resource [TIMER_RESOURCE_SIZE]) { \ - [0] = { \ - .start = _irq, \ - .end = _irq, \ - .flags = IORESOURCE_IRQ \ - } \ - } - -#define DEFINE_S3C_TIMER(_tmr_no, _irq) \ - .name = "s3c24xx-pwm", \ - .id = _tmr_no, \ - .num_resources = TIMER_RESOURCE_SIZE, \ - .resource = TIMER_RESOURCE(_tmr_no, _irq), \ - -/* - * since we already have an static mapping for the timer, - * we do not bother setting any IO resource for the base. - */ - -struct platform_device s3c_device_timer[] = { - [0] = { DEFINE_S3C_TIMER(0, IRQ_TIMER0) }, - [1] = { DEFINE_S3C_TIMER(1, IRQ_TIMER1) }, - [2] = { DEFINE_S3C_TIMER(2, IRQ_TIMER2) }, - [3] = { DEFINE_S3C_TIMER(3, IRQ_TIMER3) }, - [4] = { DEFINE_S3C_TIMER(4, IRQ_TIMER4) }, +struct platform_device samsung_device_pwm = { + .name = "samsung-pwm", + .id = -1, + .num_resources = ARRAY_SIZE(samsung_pwm_resource), + .resource = samsung_pwm_resource, }; + +void __init samsung_pwm_set_platdata(struct samsung_pwm_variant *pd) +{ + samsung_device_pwm.dev.platform_data = pd; +} #endif /* CONFIG_SAMSUNG_DEV_PWM */ /* RTC */ diff --git a/arch/arm/plat-samsung/include/plat/clock.h b/arch/arm/plat-samsung/include/plat/clock.h index a62753dc15ba..63239f409807 100644 --- a/arch/arm/plat-samsung/include/plat/clock.h +++ b/arch/arm/plat-samsung/include/plat/clock.h @@ -83,6 +83,11 @@ extern struct clk clk_ext; extern struct clksrc_clk clk_epllref; extern struct clksrc_clk clk_esysclk; +/* S3C24XX UART clocks */ +extern struct clk s3c24xx_clk_uart0; +extern struct clk s3c24xx_clk_uart1; +extern struct clk s3c24xx_clk_uart2; + /* S3C64XX specific clocks */ extern struct clk clk_h2; extern struct clk clk_27m; @@ -140,10 +145,6 @@ extern int s3c2443_clkcon_enable_s(struct clk *clk, int enable); extern int s3c64xx_sclk_ctrl(struct clk *clk, int enable); -/* Init for pwm clock code */ - -extern void s3c_pwmclk_init(void); - /* Global watchdog clock used by arch_wtd_reset() callback */ extern struct clk *s3c2410_wdtclk; diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h index 87d501ff3328..0dc4ac4909b0 100644 --- a/arch/arm/plat-samsung/include/plat/devs.h +++ b/arch/arm/plat-samsung/include/plat/devs.h @@ -134,6 +134,7 @@ extern struct platform_device exynos4_device_spdif; extern struct platform_device samsung_asoc_idma; extern struct platform_device samsung_device_keypad; +extern struct platform_device samsung_device_pwm; /* s3c2440 specific devices */ diff --git a/arch/arm/plat-samsung/include/plat/irq-vic-timer.h b/arch/arm/plat-samsung/include/plat/irq-vic-timer.h deleted file mode 100644 index 5b9c42fd32d7..000000000000 --- a/arch/arm/plat-samsung/include/plat/irq-vic-timer.h +++ /dev/null @@ -1,13 +0,0 @@ -/* arch/arm/plat-samsung/include/plat/irq-vic-timer.h - * - * Copyright (c) 2010 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Header file for Samsung SoC IRQ VIC timer - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -extern void s3c_init_vic_timer_irq(unsigned int num, unsigned int timer_irq); diff --git a/arch/arm/plat-samsung/include/plat/irqs.h b/arch/arm/plat-samsung/include/plat/irqs.h index df46b776976a..039001c0ef05 100644 --- a/arch/arm/plat-samsung/include/plat/irqs.h +++ b/arch/arm/plat-samsung/include/plat/irqs.h @@ -44,15 +44,6 @@ #define S5P_IRQ_VIC2(x) (S5P_VIC2_BASE + (x)) #define S5P_IRQ_VIC3(x) (S5P_VIC3_BASE + (x)) -#define S5P_TIMER_IRQ(x) (IRQ_TIMER_BASE + (x)) - -#define IRQ_TIMER0 S5P_TIMER_IRQ(0) -#define IRQ_TIMER1 S5P_TIMER_IRQ(1) -#define IRQ_TIMER2 S5P_TIMER_IRQ(2) -#define IRQ_TIMER3 S5P_TIMER_IRQ(3) -#define IRQ_TIMER4 S5P_TIMER_IRQ(4) -#define IRQ_TIMER_COUNT (5) - #define IRQ_EINT(x) ((x) < 16 ? ((x) + S5P_EINT_BASE1) \ : ((x) - 16 + S5P_EINT_BASE2)) diff --git a/arch/arm/plat-samsung/include/plat/pm.h b/arch/arm/plat-samsung/include/plat/pm.h index 5d47ca35cabd..6bc1a8f471e3 100644 --- a/arch/arm/plat-samsung/include/plat/pm.h +++ b/arch/arm/plat-samsung/include/plat/pm.h @@ -19,7 +19,7 @@ struct device; -#ifdef CONFIG_PM +#ifdef CONFIG_SAMSUNG_PM extern __init int s3c_pm_init(void); extern __init int s3c64xx_pm_init(void); @@ -58,8 +58,6 @@ extern unsigned char pm_uart_udivslot; /* true to save UART UDIVSLOT */ /* from sleep.S */ -extern void s3c_cpu_resume(void); - extern int s3c2410_cpu_suspend(unsigned long); /* sleep save info */ @@ -106,12 +104,14 @@ extern void s3c_pm_do_save(struct sleep_save *ptr, int count); extern void s3c_pm_do_restore(struct sleep_save *ptr, int count); extern void s3c_pm_do_restore_core(struct sleep_save *ptr, int count); -#ifdef CONFIG_PM +#ifdef CONFIG_SAMSUNG_PM extern int s3c_irq_wake(struct irq_data *data, unsigned int state); extern int s3c_irqext_wake(struct irq_data *data, unsigned int state); +extern void s3c_cpu_resume(void); #else #define s3c_irq_wake NULL #define s3c_irqext_wake NULL +#define s3c_cpu_resume NULL #endif /* PM debug functions */ diff --git a/arch/arm/plat-samsung/include/plat/pwm-clock.h b/arch/arm/plat-samsung/include/plat/pwm-clock.h deleted file mode 100644 index bf6a60eb6237..000000000000 --- a/arch/arm/plat-samsung/include/plat/pwm-clock.h +++ /dev/null @@ -1,81 +0,0 @@ -/* linux/arch/arm/plat-samsung/include/plat/pwm-clock.h - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * SAMSUNG - pwm clock and timer support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_PLAT_PWM_CLOCK_H -#define __ASM_PLAT_PWM_CLOCK_H __FILE__ - -/** - * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk - * @tcfg: The timer TCFG1 register bits shifted down to 0. - * - * Return true if the given configuration from TCFG1 is a TCLK instead - * any of the TDIV clocks. - */ -static inline int pwm_cfg_src_is_tclk(unsigned long tcfg) -{ - if (soc_is_s3c24xx()) - return tcfg == S3C2410_TCFG1_MUX_TCLK; - else if (soc_is_s3c64xx() || soc_is_s5pc100()) - return tcfg >= S3C64XX_TCFG1_MUX_TCLK; - else if (soc_is_s5p6440() || soc_is_s5p6450()) - return 0; - else - return tcfg == S3C64XX_TCFG1_MUX_TCLK; -} - -/** - * tcfg_to_divisor() - convert tcfg1 setting to a divisor - * @tcfg1: The tcfg1 setting, shifted down. - * - * Get the divisor value for the given tcfg1 setting. We assume the - * caller has already checked to see if this is not a TCLK source. - */ -static inline unsigned long tcfg_to_divisor(unsigned long tcfg1) -{ - if (soc_is_s3c24xx()) - return 1 << (tcfg1 + 1); - else - return 1 << tcfg1; -} - -/** - * pwm_tdiv_has_div1() - does the tdiv setting have a /1 - * - * Return true if we have a /1 in the tdiv setting. - */ -static inline unsigned int pwm_tdiv_has_div1(void) -{ - if (soc_is_s3c24xx()) - return 0; - else - return 1; -} - -/** - * pwm_tdiv_div_bits() - calculate TCFG1 divisor value. - * @div: The divisor to calculate the bit information for. - * - * Turn a divisor into the necessary bit field for TCFG1. - */ -static inline unsigned long pwm_tdiv_div_bits(unsigned int div) -{ - if (soc_is_s3c24xx()) - return ilog2(div) - 1; - else - return ilog2(div); -} -#endif /* __ASM_PLAT_PWM_CLOCK_H */ diff --git a/arch/arm/plat-samsung/include/plat/pwm-core.h b/arch/arm/plat-samsung/include/plat/pwm-core.h new file mode 100644 index 000000000000..5bff1facb672 --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/pwm-core.h @@ -0,0 +1,22 @@ +/* + * Copyright 2013 Tomasz Figa <tomasz.figa@gmail.com> + * + * Samsung PWM controller platform data helpers. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_PWM_CORE_H +#define __ASM_ARCH_PWM_CORE_H __FILE__ + +#include <clocksource/samsung_pwm.h> + +#ifdef CONFIG_SAMSUNG_DEV_PWM +extern void samsung_pwm_set_platdata(struct samsung_pwm_variant *pd); +#else +static inline void samsung_pwm_set_platdata(struct samsung_pwm_variant *pd) { } +#endif + +#endif /* __ASM_ARCH_PWM_CORE_H */ diff --git a/arch/arm/plat-samsung/include/plat/regs-timer.h b/arch/arm/plat-samsung/include/plat/regs-timer.h deleted file mode 100644 index d097d92f8cc7..000000000000 --- a/arch/arm/plat-samsung/include/plat/regs-timer.h +++ /dev/null @@ -1,124 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-timer.h - * - * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk> - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2410 Timer configuration -*/ - -#ifndef __ASM_ARCH_REGS_TIMER_H -#define __ASM_ARCH_REGS_TIMER_H - -#define S3C_TIMERREG(x) (S3C_VA_TIMER + (x)) -#define S3C_TIMERREG2(tmr,reg) S3C_TIMERREG((reg)+0x0c+((tmr)*0x0c)) - -#define S3C2410_TCFG0 S3C_TIMERREG(0x00) -#define S3C2410_TCFG1 S3C_TIMERREG(0x04) -#define S3C2410_TCON S3C_TIMERREG(0x08) - -#define S3C64XX_TINT_CSTAT S3C_TIMERREG(0x44) - -#define S3C2410_TCFG_PRESCALER0_MASK (255<<0) -#define S3C2410_TCFG_PRESCALER1_MASK (255<<8) -#define S3C2410_TCFG_PRESCALER1_SHIFT (8) -#define S3C2410_TCFG_DEADZONE_MASK (255<<16) -#define S3C2410_TCFG_DEADZONE_SHIFT (16) - -#define S3C2410_TCFG1_MUX4_DIV2 (0<<16) -#define S3C2410_TCFG1_MUX4_DIV4 (1<<16) -#define S3C2410_TCFG1_MUX4_DIV8 (2<<16) -#define S3C2410_TCFG1_MUX4_DIV16 (3<<16) -#define S3C2410_TCFG1_MUX4_TCLK1 (4<<16) -#define S3C2410_TCFG1_MUX4_MASK (15<<16) -#define S3C2410_TCFG1_MUX4_SHIFT (16) - -#define S3C2410_TCFG1_MUX3_DIV2 (0<<12) -#define S3C2410_TCFG1_MUX3_DIV4 (1<<12) -#define S3C2410_TCFG1_MUX3_DIV8 (2<<12) -#define S3C2410_TCFG1_MUX3_DIV16 (3<<12) -#define S3C2410_TCFG1_MUX3_TCLK1 (4<<12) -#define S3C2410_TCFG1_MUX3_MASK (15<<12) - - -#define S3C2410_TCFG1_MUX2_DIV2 (0<<8) -#define S3C2410_TCFG1_MUX2_DIV4 (1<<8) -#define S3C2410_TCFG1_MUX2_DIV8 (2<<8) -#define S3C2410_TCFG1_MUX2_DIV16 (3<<8) -#define S3C2410_TCFG1_MUX2_TCLK1 (4<<8) -#define S3C2410_TCFG1_MUX2_MASK (15<<8) - - -#define S3C2410_TCFG1_MUX1_DIV2 (0<<4) -#define S3C2410_TCFG1_MUX1_DIV4 (1<<4) -#define S3C2410_TCFG1_MUX1_DIV8 (2<<4) -#define S3C2410_TCFG1_MUX1_DIV16 (3<<4) -#define S3C2410_TCFG1_MUX1_TCLK0 (4<<4) -#define S3C2410_TCFG1_MUX1_MASK (15<<4) - -#define S3C2410_TCFG1_MUX0_DIV2 (0<<0) -#define S3C2410_TCFG1_MUX0_DIV4 (1<<0) -#define S3C2410_TCFG1_MUX0_DIV8 (2<<0) -#define S3C2410_TCFG1_MUX0_DIV16 (3<<0) -#define S3C2410_TCFG1_MUX0_TCLK0 (4<<0) -#define S3C2410_TCFG1_MUX0_MASK (15<<0) - -#define S3C2410_TCFG1_MUX_DIV2 (0<<0) -#define S3C2410_TCFG1_MUX_DIV4 (1<<0) -#define S3C2410_TCFG1_MUX_DIV8 (2<<0) -#define S3C2410_TCFG1_MUX_DIV16 (3<<0) -#define S3C2410_TCFG1_MUX_TCLK (4<<0) -#define S3C2410_TCFG1_MUX_MASK (15<<0) - -#define S3C64XX_TCFG1_MUX_DIV1 (0<<0) -#define S3C64XX_TCFG1_MUX_DIV2 (1<<0) -#define S3C64XX_TCFG1_MUX_DIV4 (2<<0) -#define S3C64XX_TCFG1_MUX_DIV8 (3<<0) -#define S3C64XX_TCFG1_MUX_DIV16 (4<<0) -#define S3C64XX_TCFG1_MUX_TCLK (5<<0) /* 3 sets of TCLK */ -#define S3C64XX_TCFG1_MUX_MASK (15<<0) - -#define S3C2410_TCFG1_SHIFT(x) ((x) * 4) - -/* for each timer, we have an count buffer, an compare buffer and - * an observation buffer -*/ - -/* WARNING - timer 4 has no buffer reg, and it's observation is at +4 */ - -#define S3C2410_TCNTB(tmr) S3C_TIMERREG2(tmr, 0x00) -#define S3C2410_TCMPB(tmr) S3C_TIMERREG2(tmr, 0x04) -#define S3C2410_TCNTO(tmr) S3C_TIMERREG2(tmr, (((tmr) == 4) ? 0x04 : 0x08)) - -#define S3C2410_TCON_T4RELOAD (1<<22) -#define S3C2410_TCON_T4MANUALUPD (1<<21) -#define S3C2410_TCON_T4START (1<<20) - -#define S3C2410_TCON_T3RELOAD (1<<19) -#define S3C2410_TCON_T3INVERT (1<<18) -#define S3C2410_TCON_T3MANUALUPD (1<<17) -#define S3C2410_TCON_T3START (1<<16) - -#define S3C2410_TCON_T2RELOAD (1<<15) -#define S3C2410_TCON_T2INVERT (1<<14) -#define S3C2410_TCON_T2MANUALUPD (1<<13) -#define S3C2410_TCON_T2START (1<<12) - -#define S3C2410_TCON_T1RELOAD (1<<11) -#define S3C2410_TCON_T1INVERT (1<<10) -#define S3C2410_TCON_T1MANUALUPD (1<<9) -#define S3C2410_TCON_T1START (1<<8) - -#define S3C2410_TCON_T0DEADZONE (1<<4) -#define S3C2410_TCON_T0RELOAD (1<<3) -#define S3C2410_TCON_T0INVERT (1<<2) -#define S3C2410_TCON_T0MANUALUPD (1<<1) -#define S3C2410_TCON_T0START (1<<0) - -#endif /* __ASM_ARCH_REGS_TIMER_H */ - - - diff --git a/arch/arm/plat-samsung/include/plat/samsung-time.h b/arch/arm/plat-samsung/include/plat/samsung-time.h index 4cc99bb1f176..209464adef97 100644 --- a/arch/arm/plat-samsung/include/plat/samsung-time.h +++ b/arch/arm/plat-samsung/include/plat/samsung-time.h @@ -22,29 +22,6 @@ enum samsung_timer_mode { SAMSUNG_PWM4, }; -struct samsung_timer_source { - unsigned int event_id; - unsigned int source_id; -}; - -/* Be able to sleep for atleast 4 seconds (usually more) */ -#define SAMSUNG_TIMER_MIN_RANGE 4 - -#if defined(CONFIG_ARCH_S3C24XX) || defined(CONFIG_ARCH_S5PC100) -#define TCNT_MAX 0xffff -#define TSCALER_DIV 25 -#define TDIV 50 -#define TSIZE 16 -#else -#define TCNT_MAX 0xffffffff -#define TSCALER_DIV 2 -#define TDIV 2 -#define TSIZE 32 -#endif - -#define NON_PERIODIC 0 -#define PERIODIC 1 - extern void __init samsung_set_timer_source(enum samsung_timer_mode event, enum samsung_timer_mode source); diff --git a/arch/arm/plat-samsung/irq-vic-timer.c b/arch/arm/plat-samsung/irq-vic-timer.c deleted file mode 100644 index 0fceb4273824..000000000000 --- a/arch/arm/plat-samsung/irq-vic-timer.c +++ /dev/null @@ -1,98 +0,0 @@ -/* arch/arm/plat-samsung/irq-vic-timer.c - * originally part of arch/arm/plat-s3c64xx/irq.c - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C64XX - Interrupt handling - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/irqchip/chained_irq.h> -#include <linux/io.h> - -#include <mach/map.h> -#include <mach/irqs.h> -#include <plat/cpu.h> -#include <plat/irq-vic-timer.h> -#include <plat/regs-timer.h> - -static void s3c_irq_demux_vic_timer(unsigned int irq, struct irq_desc *desc) -{ - struct irq_chip *chip = irq_get_chip(irq); - chained_irq_enter(chip, desc); - generic_handle_irq((int)desc->irq_data.handler_data); - chained_irq_exit(chip, desc); -} - -/* We assume the IRQ_TIMER0..IRQ_TIMER4 range is continuous. */ -static void s3c_irq_timer_ack(struct irq_data *d) -{ - struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); - u32 mask = (1 << 5) << (d->irq - gc->irq_base); - - irq_reg_writel(mask | gc->mask_cache, gc->reg_base); -} - -/** - * s3c_init_vic_timer_irq() - initialise timer irq chanined off VIC.\ - * @num: Number of timers to initialize - * @timer_irq: Base IRQ number to be used for the timers. - * - * Register the necessary IRQ chaining and support for the timer IRQs - * chained of the VIC. - */ -void __init s3c_init_vic_timer_irq(unsigned int num, unsigned int timer_irq) -{ - unsigned int pirq[5] = { IRQ_TIMER0_VIC, IRQ_TIMER1_VIC, IRQ_TIMER2_VIC, - IRQ_TIMER3_VIC, IRQ_TIMER4_VIC }; - struct irq_chip_generic *s3c_tgc; - struct irq_chip_type *ct; - unsigned int i; - -#ifdef CONFIG_ARCH_EXYNOS - if (soc_is_exynos5250()) { - pirq[0] = EXYNOS5_IRQ_TIMER0_VIC; - pirq[1] = EXYNOS5_IRQ_TIMER1_VIC; - pirq[2] = EXYNOS5_IRQ_TIMER2_VIC; - pirq[3] = EXYNOS5_IRQ_TIMER3_VIC; - pirq[4] = EXYNOS5_IRQ_TIMER4_VIC; - } else { - pirq[0] = EXYNOS4_IRQ_TIMER0_VIC; - pirq[1] = EXYNOS4_IRQ_TIMER1_VIC; - pirq[2] = EXYNOS4_IRQ_TIMER2_VIC; - pirq[3] = EXYNOS4_IRQ_TIMER3_VIC; - pirq[4] = EXYNOS4_IRQ_TIMER4_VIC; - } -#endif - s3c_tgc = irq_alloc_generic_chip("s3c-timer", 1, timer_irq, - S3C64XX_TINT_CSTAT, handle_level_irq); - - if (!s3c_tgc) { - pr_err("%s: irq_alloc_generic_chip for IRQ %d failed\n", - __func__, timer_irq); - return; - } - - ct = s3c_tgc->chip_types; - ct->chip.irq_mask = irq_gc_mask_clr_bit; - ct->chip.irq_unmask = irq_gc_mask_set_bit; - ct->chip.irq_ack = s3c_irq_timer_ack; - irq_setup_generic_chip(s3c_tgc, IRQ_MSK(num), IRQ_GC_INIT_MASK_CACHE, - IRQ_NOREQUEST | IRQ_NOPROBE, 0); - /* Clear the upper bits of the mask_cache*/ - s3c_tgc->mask_cache &= 0x1f; - - for (i = 0; i < num; i++, timer_irq++) { - irq_set_chained_handler(pirq[i], s3c_irq_demux_vic_timer); - irq_set_handler_data(pirq[i], (void *)timer_irq); - } -} diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c index ea3613642451..d0c23010b693 100644 --- a/arch/arm/plat-samsung/pm.c +++ b/arch/arm/plat-samsung/pm.c @@ -80,7 +80,7 @@ unsigned char pm_uart_udivslot; #ifdef CONFIG_SAMSUNG_PM_DEBUG -static struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS]; +static struct pm_uart_save uart_save; static void s3c_pm_save_uart(unsigned int uart, struct pm_uart_save *save) { @@ -101,11 +101,7 @@ static void s3c_pm_save_uart(unsigned int uart, struct pm_uart_save *save) static void s3c_pm_save_uarts(void) { - struct pm_uart_save *save = uart_save; - unsigned int uart; - - for (uart = 0; uart < CONFIG_SERIAL_SAMSUNG_UARTS; uart++, save++) - s3c_pm_save_uart(uart, save); + s3c_pm_save_uart(CONFIG_DEBUG_S3C_UART, &uart_save); } static void s3c_pm_restore_uart(unsigned int uart, struct pm_uart_save *save) @@ -126,11 +122,7 @@ static void s3c_pm_restore_uart(unsigned int uart, struct pm_uart_save *save) static void s3c_pm_restore_uarts(void) { - struct pm_uart_save *save = uart_save; - unsigned int uart; - - for (uart = 0; uart < CONFIG_SERIAL_SAMSUNG_UARTS; uart++, save++) - s3c_pm_restore_uart(uart, save); + s3c_pm_restore_uart(CONFIG_DEBUG_S3C_UART, &uart_save); } #else static void s3c_pm_save_uarts(void) { } diff --git a/arch/arm/plat-samsung/pwm-clock.c b/arch/arm/plat-samsung/pwm-clock.c deleted file mode 100644 index a35ff3bcffe4..000000000000 --- a/arch/arm/plat-samsung/pwm-clock.c +++ /dev/null @@ -1,474 +0,0 @@ -/* linux/arch/arm/plat-s3c24xx/pwm-clock.c - * - * Copyright (c) 2007 Simtec Electronics - * Copyright (c) 2007, 2008 Ben Dooks - * Ben Dooks <ben-linux@fluff.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License. -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/log2.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <mach/map.h> -#include <asm/irq.h> - -#include <plat/clock.h> -#include <plat/cpu.h> - -#include <plat/regs-timer.h> -#include <plat/pwm-clock.h> - -/* Each of the timers 0 through 5 go through the following - * clock tree, with the inputs depending on the timers. - * - * pclk ---- [ prescaler 0 ] -+---> timer 0 - * +---> timer 1 - * - * pclk ---- [ prescaler 1 ] -+---> timer 2 - * +---> timer 3 - * \---> timer 4 - * - * Which are fed into the timers as so: - * - * prescaled 0 ---- [ div 2,4,8,16 ] ---\ - * [mux] -> timer 0 - * tclk 0 ------------------------------/ - * - * prescaled 0 ---- [ div 2,4,8,16 ] ---\ - * [mux] -> timer 1 - * tclk 0 ------------------------------/ - * - * - * prescaled 1 ---- [ div 2,4,8,16 ] ---\ - * [mux] -> timer 2 - * tclk 1 ------------------------------/ - * - * prescaled 1 ---- [ div 2,4,8,16 ] ---\ - * [mux] -> timer 3 - * tclk 1 ------------------------------/ - * - * prescaled 1 ---- [ div 2,4,8, 16 ] --\ - * [mux] -> timer 4 - * tclk 1 ------------------------------/ - * - * Since the mux and the divider are tied together in the - * same register space, it is impossible to set the parent - * and the rate at the same time. To avoid this, we add an - * intermediate 'prescaled-and-divided' clock to select - * as the parent for the timer input clock called tdiv. - * - * prescaled clk --> pwm-tdiv ---\ - * [ mux ] --> timer X - * tclk -------------------------/ -*/ - -static struct clk clk_timer_scaler[]; - -static unsigned long clk_pwm_scaler_get_rate(struct clk *clk) -{ - unsigned long tcfg0 = __raw_readl(S3C2410_TCFG0); - - if (clk == &clk_timer_scaler[1]) { - tcfg0 &= S3C2410_TCFG_PRESCALER1_MASK; - tcfg0 >>= S3C2410_TCFG_PRESCALER1_SHIFT; - } else { - tcfg0 &= S3C2410_TCFG_PRESCALER0_MASK; - } - - return clk_get_rate(clk->parent) / (tcfg0 + 1); -} - -static unsigned long clk_pwm_scaler_round_rate(struct clk *clk, - unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long divisor = parent_rate / rate; - - if (divisor > 256) - divisor = 256; - else if (divisor < 2) - divisor = 2; - - return parent_rate / divisor; -} - -static int clk_pwm_scaler_set_rate(struct clk *clk, unsigned long rate) -{ - unsigned long round = clk_pwm_scaler_round_rate(clk, rate); - unsigned long tcfg0; - unsigned long divisor; - unsigned long flags; - - divisor = clk_get_rate(clk->parent) / round; - divisor--; - - local_irq_save(flags); - tcfg0 = __raw_readl(S3C2410_TCFG0); - - if (clk == &clk_timer_scaler[1]) { - tcfg0 &= ~S3C2410_TCFG_PRESCALER1_MASK; - tcfg0 |= divisor << S3C2410_TCFG_PRESCALER1_SHIFT; - } else { - tcfg0 &= ~S3C2410_TCFG_PRESCALER0_MASK; - tcfg0 |= divisor; - } - - __raw_writel(tcfg0, S3C2410_TCFG0); - local_irq_restore(flags); - - return 0; -} - -static struct clk_ops clk_pwm_scaler_ops = { - .get_rate = clk_pwm_scaler_get_rate, - .set_rate = clk_pwm_scaler_set_rate, - .round_rate = clk_pwm_scaler_round_rate, -}; - -static struct clk clk_timer_scaler[] = { - [0] = { - .name = "pwm-scaler0", - .id = -1, - .ops = &clk_pwm_scaler_ops, - }, - [1] = { - .name = "pwm-scaler1", - .id = -1, - .ops = &clk_pwm_scaler_ops, - }, -}; - -static struct clk clk_timer_tclk[] = { - [0] = { - .name = "pwm-tclk0", - .id = -1, - }, - [1] = { - .name = "pwm-tclk1", - .id = -1, - }, -}; - -struct pwm_tdiv_clk { - struct clk clk; - unsigned int divisor; -}; - -static inline struct pwm_tdiv_clk *to_tdiv(struct clk *clk) -{ - return container_of(clk, struct pwm_tdiv_clk, clk); -} - -static unsigned long clk_pwm_tdiv_get_rate(struct clk *clk) -{ - unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1); - unsigned int divisor; - - tcfg1 >>= S3C2410_TCFG1_SHIFT(clk->id); - tcfg1 &= S3C2410_TCFG1_MUX_MASK; - - if (pwm_cfg_src_is_tclk(tcfg1)) - divisor = to_tdiv(clk)->divisor; - else - divisor = tcfg_to_divisor(tcfg1); - - return clk_get_rate(clk->parent) / divisor; -} - -static unsigned long clk_pwm_tdiv_round_rate(struct clk *clk, - unsigned long rate) -{ - unsigned long parent_rate; - unsigned long divisor; - - parent_rate = clk_get_rate(clk->parent); - divisor = parent_rate / rate; - - if (divisor <= 1 && pwm_tdiv_has_div1()) - divisor = 1; - else if (divisor <= 2) - divisor = 2; - else if (divisor <= 4) - divisor = 4; - else if (divisor <= 8) - divisor = 8; - else - divisor = 16; - - return parent_rate / divisor; -} - -static unsigned long clk_pwm_tdiv_bits(struct pwm_tdiv_clk *divclk) -{ - return pwm_tdiv_div_bits(divclk->divisor); -} - -static void clk_pwm_tdiv_update(struct pwm_tdiv_clk *divclk) -{ - unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1); - unsigned long bits = clk_pwm_tdiv_bits(divclk); - unsigned long flags; - unsigned long shift = S3C2410_TCFG1_SHIFT(divclk->clk.id); - - local_irq_save(flags); - - tcfg1 = __raw_readl(S3C2410_TCFG1); - tcfg1 &= ~(S3C2410_TCFG1_MUX_MASK << shift); - tcfg1 |= bits << shift; - __raw_writel(tcfg1, S3C2410_TCFG1); - - local_irq_restore(flags); -} - -static int clk_pwm_tdiv_set_rate(struct clk *clk, unsigned long rate) -{ - struct pwm_tdiv_clk *divclk = to_tdiv(clk); - unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1); - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long divisor; - - tcfg1 >>= S3C2410_TCFG1_SHIFT(clk->id); - tcfg1 &= S3C2410_TCFG1_MUX_MASK; - - rate = clk_round_rate(clk, rate); - divisor = parent_rate / rate; - - if (divisor > 16) - return -EINVAL; - - divclk->divisor = divisor; - - /* Update the current MUX settings if we are currently - * selected as the clock source for this clock. */ - - if (!pwm_cfg_src_is_tclk(tcfg1)) - clk_pwm_tdiv_update(divclk); - - return 0; -} - -static struct clk_ops clk_tdiv_ops = { - .get_rate = clk_pwm_tdiv_get_rate, - .set_rate = clk_pwm_tdiv_set_rate, - .round_rate = clk_pwm_tdiv_round_rate, -}; - -static struct pwm_tdiv_clk clk_timer_tdiv[] = { - [0] = { - .clk = { - .name = "pwm-tdiv", - .devname = "s3c24xx-pwm.0", - .ops = &clk_tdiv_ops, - .parent = &clk_timer_scaler[0], - }, - }, - [1] = { - .clk = { - .name = "pwm-tdiv", - .devname = "s3c24xx-pwm.1", - .ops = &clk_tdiv_ops, - .parent = &clk_timer_scaler[0], - } - }, - [2] = { - .clk = { - .name = "pwm-tdiv", - .devname = "s3c24xx-pwm.2", - .ops = &clk_tdiv_ops, - .parent = &clk_timer_scaler[1], - }, - }, - [3] = { - .clk = { - .name = "pwm-tdiv", - .devname = "s3c24xx-pwm.3", - .ops = &clk_tdiv_ops, - .parent = &clk_timer_scaler[1], - }, - }, - [4] = { - .clk = { - .name = "pwm-tdiv", - .devname = "s3c24xx-pwm.4", - .ops = &clk_tdiv_ops, - .parent = &clk_timer_scaler[1], - }, - }, -}; - -static int __init clk_pwm_tdiv_register(unsigned int id) -{ - struct pwm_tdiv_clk *divclk = &clk_timer_tdiv[id]; - unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1); - - tcfg1 >>= S3C2410_TCFG1_SHIFT(id); - tcfg1 &= S3C2410_TCFG1_MUX_MASK; - - divclk->clk.id = id; - divclk->divisor = tcfg_to_divisor(tcfg1); - - return s3c24xx_register_clock(&divclk->clk); -} - -static inline struct clk *s3c24xx_pwmclk_tclk(unsigned int id) -{ - return (id >= 2) ? &clk_timer_tclk[1] : &clk_timer_tclk[0]; -} - -static inline struct clk *s3c24xx_pwmclk_tdiv(unsigned int id) -{ - return &clk_timer_tdiv[id].clk; -} - -static int clk_pwm_tin_set_parent(struct clk *clk, struct clk *parent) -{ - unsigned int id = clk->id; - unsigned long tcfg1; - unsigned long flags; - unsigned long bits; - unsigned long shift = S3C2410_TCFG1_SHIFT(id); - - unsigned long mux_tclk; - - if (soc_is_s3c24xx()) - mux_tclk = S3C2410_TCFG1_MUX_TCLK; - else if (soc_is_s5p6440() || soc_is_s5p6450()) - mux_tclk = 0; - else - mux_tclk = S3C64XX_TCFG1_MUX_TCLK; - - if (parent == s3c24xx_pwmclk_tclk(id)) - bits = mux_tclk << shift; - else if (parent == s3c24xx_pwmclk_tdiv(id)) - bits = clk_pwm_tdiv_bits(to_tdiv(parent)) << shift; - else - return -EINVAL; - - clk->parent = parent; - - local_irq_save(flags); - - tcfg1 = __raw_readl(S3C2410_TCFG1); - tcfg1 &= ~(S3C2410_TCFG1_MUX_MASK << shift); - __raw_writel(tcfg1 | bits, S3C2410_TCFG1); - - local_irq_restore(flags); - - return 0; -} - -static struct clk_ops clk_tin_ops = { - .set_parent = clk_pwm_tin_set_parent, -}; - -static struct clk clk_tin[] = { - [0] = { - .name = "pwm-tin", - .devname = "s3c24xx-pwm.0", - .id = 0, - .ops = &clk_tin_ops, - }, - [1] = { - .name = "pwm-tin", - .devname = "s3c24xx-pwm.1", - .id = 1, - .ops = &clk_tin_ops, - }, - [2] = { - .name = "pwm-tin", - .devname = "s3c24xx-pwm.2", - .id = 2, - .ops = &clk_tin_ops, - }, - [3] = { - .name = "pwm-tin", - .devname = "s3c24xx-pwm.3", - .id = 3, - .ops = &clk_tin_ops, - }, - [4] = { - .name = "pwm-tin", - .devname = "s3c24xx-pwm.4", - .id = 4, - .ops = &clk_tin_ops, - }, -}; - -static __init int clk_pwm_tin_register(struct clk *pwm) -{ - unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1); - unsigned int id = pwm->id; - - struct clk *parent; - int ret; - - ret = s3c24xx_register_clock(pwm); - if (ret < 0) - return ret; - - tcfg1 >>= S3C2410_TCFG1_SHIFT(id); - tcfg1 &= S3C2410_TCFG1_MUX_MASK; - - if (pwm_cfg_src_is_tclk(tcfg1)) - parent = s3c24xx_pwmclk_tclk(id); - else - parent = s3c24xx_pwmclk_tdiv(id); - - return clk_set_parent(pwm, parent); -} - -/** - * s3c_pwmclk_init() - initialise pwm clocks - * - * Initialise and register the clocks which provide the inputs for the - * pwm timer blocks. - * - * Note, this call is required by the time core, so must be called after - * the base clocks are added and before any of the initcalls are run. - */ -__init void s3c_pwmclk_init(void) -{ - struct clk *clk_timers; - unsigned int clk; - int ret; - - clk_timers = clk_get(NULL, "timers"); - if (IS_ERR(clk_timers)) { - printk(KERN_ERR "%s: no parent clock\n", __func__); - return; - } - - for (clk = 0; clk < ARRAY_SIZE(clk_timer_scaler); clk++) - clk_timer_scaler[clk].parent = clk_timers; - - s3c_register_clocks(clk_timer_scaler, ARRAY_SIZE(clk_timer_scaler)); - s3c_register_clocks(clk_timer_tclk, ARRAY_SIZE(clk_timer_tclk)); - - for (clk = 0; clk < ARRAY_SIZE(clk_timer_tdiv); clk++) { - ret = clk_pwm_tdiv_register(clk); - - if (ret < 0) { - printk(KERN_ERR "error adding pwm%d tdiv clock\n", clk); - return; - } - } - - for (clk = 0; clk < ARRAY_SIZE(clk_tin); clk++) { - ret = clk_pwm_tin_register(&clk_tin[clk]); - if (ret < 0) { - printk(KERN_ERR "error adding pwm%d tin clock\n", clk); - return; - } - } -} diff --git a/arch/arm/plat-samsung/s5p-irq.c b/arch/arm/plat-samsung/s5p-irq.c index ff1a76011b1e..ddfaca9c79d8 100644 --- a/arch/arm/plat-samsung/s5p-irq.c +++ b/arch/arm/plat-samsung/s5p-irq.c @@ -17,9 +17,7 @@ #include <mach/irqs.h> #include <mach/map.h> -#include <plat/regs-timer.h> #include <plat/cpu.h> -#include <plat/irq-vic-timer.h> void __init s5p_init_irq(u32 *vic, u32 num_vic) { @@ -30,6 +28,4 @@ void __init s5p_init_irq(u32 *vic, u32 num_vic) for (irq = 0; irq < num_vic; irq++) vic_init(VA_VIC(irq), VIC_BASE(irq), vic[irq], 0); #endif - - s3c_init_vic_timer_irq(5, IRQ_TIMER0); } diff --git a/arch/arm/plat-samsung/samsung-time.c b/arch/arm/plat-samsung/samsung-time.c deleted file mode 100644 index 2957075ca836..000000000000 --- a/arch/arm/plat-samsung/samsung-time.c +++ /dev/null @@ -1,394 +0,0 @@ -/* - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * samsung - Common hr-timer support (s3c and s5p) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/clockchips.h> -#include <linux/platform_device.h> -#include <linux/sched_clock.h> - -#include <asm/smp_twd.h> -#include <asm/mach/time.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include <mach/map.h> -#include <plat/devs.h> -#include <plat/regs-timer.h> -#include <plat/samsung-time.h> - -static struct clk *tin_event; -static struct clk *tin_source; -static struct clk *tdiv_event; -static struct clk *tdiv_source; -static struct clk *timerclk; -static struct samsung_timer_source timer_source; -static unsigned long clock_count_per_tick; -static void samsung_timer_resume(void); - -static void samsung_time_stop(enum samsung_timer_mode mode) -{ - unsigned long tcon; - - tcon = __raw_readl(S3C2410_TCON); - - switch (mode) { - case SAMSUNG_PWM0: - tcon &= ~S3C2410_TCON_T0START; - break; - - case SAMSUNG_PWM1: - tcon &= ~S3C2410_TCON_T1START; - break; - - case SAMSUNG_PWM2: - tcon &= ~S3C2410_TCON_T2START; - break; - - case SAMSUNG_PWM3: - tcon &= ~S3C2410_TCON_T3START; - break; - - case SAMSUNG_PWM4: - tcon &= ~S3C2410_TCON_T4START; - break; - - default: - printk(KERN_ERR "Invalid Timer %d\n", mode); - break; - } - __raw_writel(tcon, S3C2410_TCON); -} - -static void samsung_time_setup(enum samsung_timer_mode mode, unsigned long tcnt) -{ - unsigned long tcon; - - tcon = __raw_readl(S3C2410_TCON); - - tcnt--; - - switch (mode) { - case SAMSUNG_PWM0: - tcon &= ~(0x0f << 0); - tcon |= S3C2410_TCON_T0MANUALUPD; - break; - - case SAMSUNG_PWM1: - tcon &= ~(0x0f << 8); - tcon |= S3C2410_TCON_T1MANUALUPD; - break; - - case SAMSUNG_PWM2: - tcon &= ~(0x0f << 12); - tcon |= S3C2410_TCON_T2MANUALUPD; - break; - - case SAMSUNG_PWM3: - tcon &= ~(0x0f << 16); - tcon |= S3C2410_TCON_T3MANUALUPD; - break; - - case SAMSUNG_PWM4: - tcon &= ~(0x07 << 20); - tcon |= S3C2410_TCON_T4MANUALUPD; - break; - - default: - printk(KERN_ERR "Invalid Timer %d\n", mode); - break; - } - - __raw_writel(tcnt, S3C2410_TCNTB(mode)); - __raw_writel(tcnt, S3C2410_TCMPB(mode)); - __raw_writel(tcon, S3C2410_TCON); -} - -static void samsung_time_start(enum samsung_timer_mode mode, bool periodic) -{ - unsigned long tcon; - - tcon = __raw_readl(S3C2410_TCON); - - switch (mode) { - case SAMSUNG_PWM0: - tcon |= S3C2410_TCON_T0START; - tcon &= ~S3C2410_TCON_T0MANUALUPD; - - if (periodic) - tcon |= S3C2410_TCON_T0RELOAD; - else - tcon &= ~S3C2410_TCON_T0RELOAD; - break; - - case SAMSUNG_PWM1: - tcon |= S3C2410_TCON_T1START; - tcon &= ~S3C2410_TCON_T1MANUALUPD; - - if (periodic) - tcon |= S3C2410_TCON_T1RELOAD; - else - tcon &= ~S3C2410_TCON_T1RELOAD; - break; - - case SAMSUNG_PWM2: - tcon |= S3C2410_TCON_T2START; - tcon &= ~S3C2410_TCON_T2MANUALUPD; - - if (periodic) - tcon |= S3C2410_TCON_T2RELOAD; - else - tcon &= ~S3C2410_TCON_T2RELOAD; - break; - - case SAMSUNG_PWM3: - tcon |= S3C2410_TCON_T3START; - tcon &= ~S3C2410_TCON_T3MANUALUPD; - - if (periodic) - tcon |= S3C2410_TCON_T3RELOAD; - else - tcon &= ~S3C2410_TCON_T3RELOAD; - break; - - case SAMSUNG_PWM4: - tcon |= S3C2410_TCON_T4START; - tcon &= ~S3C2410_TCON_T4MANUALUPD; - - if (periodic) - tcon |= S3C2410_TCON_T4RELOAD; - else - tcon &= ~S3C2410_TCON_T4RELOAD; - break; - - default: - printk(KERN_ERR "Invalid Timer %d\n", mode); - break; - } - __raw_writel(tcon, S3C2410_TCON); -} - -static int samsung_set_next_event(unsigned long cycles, - struct clock_event_device *evt) -{ - samsung_time_setup(timer_source.event_id, cycles); - samsung_time_start(timer_source.event_id, NON_PERIODIC); - - return 0; -} - -static void samsung_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) -{ - samsung_time_stop(timer_source.event_id); - - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - samsung_time_setup(timer_source.event_id, clock_count_per_tick); - samsung_time_start(timer_source.event_id, PERIODIC); - break; - - case CLOCK_EVT_MODE_ONESHOT: - break; - - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_SHUTDOWN: - break; - - case CLOCK_EVT_MODE_RESUME: - samsung_timer_resume(); - break; - } -} - -static void samsung_timer_resume(void) -{ - /* event timer restart */ - samsung_time_setup(timer_source.event_id, clock_count_per_tick); - samsung_time_start(timer_source.event_id, PERIODIC); - - /* source timer restart */ - samsung_time_setup(timer_source.source_id, TCNT_MAX); - samsung_time_start(timer_source.source_id, PERIODIC); -} - -void __init samsung_set_timer_source(enum samsung_timer_mode event, - enum samsung_timer_mode source) -{ - s3c_device_timer[event].dev.bus = &platform_bus_type; - s3c_device_timer[source].dev.bus = &platform_bus_type; - - timer_source.event_id = event; - timer_source.source_id = source; -} - -static struct clock_event_device time_event_device = { - .name = "samsung_event_timer", - .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .rating = 200, - .set_next_event = samsung_set_next_event, - .set_mode = samsung_set_mode, -}; - -static irqreturn_t samsung_clock_event_isr(int irq, void *dev_id) -{ - struct clock_event_device *evt = dev_id; - - evt->event_handler(evt); - - return IRQ_HANDLED; -} - -static struct irqaction samsung_clock_event_irq = { - .name = "samsung_time_irq", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = samsung_clock_event_isr, - .dev_id = &time_event_device, -}; - -static void __init samsung_clockevent_init(void) -{ - unsigned long pclk; - unsigned long clock_rate; - unsigned int irq_number; - struct clk *tscaler; - - pclk = clk_get_rate(timerclk); - - tscaler = clk_get_parent(tdiv_event); - - clk_set_rate(tscaler, pclk / TSCALER_DIV); - clk_set_rate(tdiv_event, pclk / TDIV); - clk_set_parent(tin_event, tdiv_event); - - clock_rate = clk_get_rate(tin_event); - clock_count_per_tick = clock_rate / HZ; - - time_event_device.cpumask = cpumask_of(0); - clockevents_config_and_register(&time_event_device, clock_rate, 1, -1); - - irq_number = timer_source.event_id + IRQ_TIMER0; - setup_irq(irq_number, &samsung_clock_event_irq); -} - -static void __iomem *samsung_timer_reg(void) -{ - unsigned long offset = 0; - - switch (timer_source.source_id) { - case SAMSUNG_PWM0: - case SAMSUNG_PWM1: - case SAMSUNG_PWM2: - case SAMSUNG_PWM3: - offset = (timer_source.source_id * 0x0c) + 0x14; - break; - - case SAMSUNG_PWM4: - offset = 0x40; - break; - - default: - printk(KERN_ERR "Invalid Timer %d\n", timer_source.source_id); - return NULL; - } - - return S3C_TIMERREG(offset); -} - -/* - * Override the global weak sched_clock symbol with this - * local implementation which uses the clocksource to get some - * better resolution when scheduling the kernel. We accept that - * this wraps around for now, since it is just a relative time - * stamp. (Inspired by U300 implementation.) - */ -static u32 notrace samsung_read_sched_clock(void) -{ - void __iomem *reg = samsung_timer_reg(); - - if (!reg) - return 0; - - return ~__raw_readl(reg); -} - -static void __init samsung_clocksource_init(void) -{ - unsigned long pclk; - unsigned long clock_rate; - - pclk = clk_get_rate(timerclk); - - clk_set_rate(tdiv_source, pclk / TDIV); - clk_set_parent(tin_source, tdiv_source); - - clock_rate = clk_get_rate(tin_source); - - samsung_time_setup(timer_source.source_id, TCNT_MAX); - samsung_time_start(timer_source.source_id, PERIODIC); - - setup_sched_clock(samsung_read_sched_clock, TSIZE, clock_rate); - - if (clocksource_mmio_init(samsung_timer_reg(), "samsung_clocksource_timer", - clock_rate, 250, TSIZE, clocksource_mmio_readl_down)) - panic("samsung_clocksource_timer: can't register clocksource\n"); -} - -static void __init samsung_timer_resources(void) -{ - - unsigned long event_id = timer_source.event_id; - unsigned long source_id = timer_source.source_id; - char devname[15]; - - timerclk = clk_get(NULL, "timers"); - if (IS_ERR(timerclk)) - panic("failed to get timers clock for timer"); - - clk_enable(timerclk); - - sprintf(devname, "s3c24xx-pwm.%lu", event_id); - s3c_device_timer[event_id].id = event_id; - s3c_device_timer[event_id].dev.init_name = devname; - - tin_event = clk_get(&s3c_device_timer[event_id].dev, "pwm-tin"); - if (IS_ERR(tin_event)) - panic("failed to get pwm-tin clock for event timer"); - - tdiv_event = clk_get(&s3c_device_timer[event_id].dev, "pwm-tdiv"); - if (IS_ERR(tdiv_event)) - panic("failed to get pwm-tdiv clock for event timer"); - - clk_enable(tin_event); - - sprintf(devname, "s3c24xx-pwm.%lu", source_id); - s3c_device_timer[source_id].id = source_id; - s3c_device_timer[source_id].dev.init_name = devname; - - tin_source = clk_get(&s3c_device_timer[source_id].dev, "pwm-tin"); - if (IS_ERR(tin_source)) - panic("failed to get pwm-tin clock for source timer"); - - tdiv_source = clk_get(&s3c_device_timer[source_id].dev, "pwm-tdiv"); - if (IS_ERR(tdiv_source)) - panic("failed to get pwm-tdiv clock for source timer"); - - clk_enable(tin_source); -} - -void __init samsung_timer_init(void) -{ - samsung_timer_resources(); - samsung_clockevent_init(); - samsung_clocksource_init(); -} |