diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi')
-rw-r--r-- | arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi | 145 |
1 files changed, 27 insertions, 118 deletions
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi index 74ffd04db8d8..7943bb619116 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi @@ -9,7 +9,9 @@ / { aliases { - serial0 = &blsp1_uart2; + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* SD card */ + serial0 = &blsp_uart2; }; chosen { @@ -34,13 +36,13 @@ volume-up-button { label = "Volume Up"; - gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; }; home-button { label = "Home"; - gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 109 GPIO_ACTIVE_LOW>; linux,code = <KEY_HOMEPAGE>; }; }; @@ -55,7 +57,7 @@ hall-sensor-switch { label = "Hall Effect Sensor"; - gpios = <&msmgpio 52 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 52 GPIO_ACTIVE_LOW>; linux,input-type = <EV_SW>; linux,code = <SW_LID>; linux,can-disable; @@ -74,7 +76,7 @@ maxim,over-heat-temp = <600>; maxim,over-volt = <4400>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <121 IRQ_TYPE_EDGE_FALLING>; pinctrl-0 = <&fuelgauge_int_default>; @@ -97,7 +99,7 @@ vdd-supply = <&pm8916_l17>; vddio-supply = <&pm8916_l5>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <115 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "INT1"; @@ -111,7 +113,7 @@ }; }; -&blsp1_uart2 { +&blsp_uart2 { status = "okay"; }; @@ -120,25 +122,28 @@ status = "okay"; }; +&pm8916_rpm_regulators { + pm8916_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; +}; + /* FIXME: Replace with MAX77849 MUIC when driver is available */ &pm8916_usbin { status = "okay"; }; &sdhc_1 { - pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; - pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; - pinctrl-names = "default", "sleep"; - status = "okay"; }; &sdhc_2 { - pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; - pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + pinctrl-0 = <&sdc2_default &sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; pinctrl-names = "default", "sleep"; - cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -162,110 +167,7 @@ compatible = "qcom,wcn3660b"; }; -&smd_rpm_regulators { - vdd_l1_l2_l3-supply = <&pm8916_s3>; - vdd_l4_l5_l6-supply = <&pm8916_s4>; - vdd_l7-supply = <&pm8916_s4>; - - s3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1300000>; - }; - - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2100000>; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l8 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2900000>; - }; - - l9 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - l10 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2800000>; - }; - - l11 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - regulator-system-load = <200000>; - regulator-allow-set-load; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l13 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l16 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - l17 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l18 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; -}; - -&msmgpio { +&tlmm { accel_int_default: accel-int-default-state { pins = "gpio115"; function = "gpio"; @@ -293,4 +195,11 @@ drive-strength = <2>; bias-disable; }; + + sdc2_cd_default: sdc2-cd-default-state { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; }; |