1 files changed, 0 insertions, 122 deletions
diff --git a/arch/arm64/boot/dts/renesas/r8a77951-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a77951-salvator-xs.dts
index 37202fcdc35b..7f9fa842f01e 100644
--- a/arch/arm64/boot/dts/renesas/r8a77951-salvator-xs.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77951-salvator-xs.dts
@@ -47,125 +47,3 @@
 	clock-names = "du.0", "du.1", "du.2", "du.3",
 		      "dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3";
 };
-
-&ehci2 {
-	status = "okay";
-};
-
-&ehci3 {
-	dr_mode = "otg";
-	status = "okay";
-};
-
-&hdmi1 {
-	status = "okay";
-
-	ports {
-		port@1 {
-			reg = <1>;
-			rcar_dw_hdmi1_out: endpoint {
-				remote-endpoint = <&hdmi1_con>;
-			};
-		};
-		port@2 {
-			reg = <2>;
-			dw_hdmi1_snd_in: endpoint {
-				remote-endpoint = <&rsnd_endpoint2>;
-			};
-		};
-	};
-};
-
-&hdmi1_con {
-	remote-endpoint = <&rcar_dw_hdmi1_out>;
-};
-
-&hsusb3 {
-	dr_mode = "otg";
-	status = "okay";
-};
-
-&ohci2 {
-	status = "okay";
-};
-
-&ohci3 {
-	dr_mode = "otg";
-	status = "okay";
-};
-
-&pca9654 {
-	pcie-sata-switch-hog {
-		gpio-hog;
-		gpios = <7 GPIO_ACTIVE_HIGH>;
-		output-low; /* enable SATA by default */
-		line-name = "PCIE/SATA switch";
-	};
-};
-
-&pfc {
-	usb2_pins: usb2 {
-		groups = "usb2";
-		function = "usb2";
-	};
-
-	/*
-	 * - On Salvator-X[S], GP6_3[01] are connected to ADV7482 as irq pins
-	 *   (when SW31 is the default setting on Salvator-XS).
-	 * - If SW31 is the default setting, you cannot use USB2.0 ch3 on
-	 *   r8a77951 with Salvator-XS.
-	 *   Hence the SW31 setting must be changed like 2) below.
-	 *   1) Default setting of SW31: ON-ON-OFF-OFF-OFF-OFF:
-	 *	- Connect GP6_3[01] to ADV7842.
-	 *   2) Changed setting of SW31: OFF-OFF-ON-ON-ON-ON:
-	 *	- Connect GP6_3[01] to BD082065 (USB2.0 ch3's host power).
-	 *	- Connect GP6_{04,21} to ADV7842.
-	 */
-	usb2_ch3_pins: usb2_ch3 {
-		groups = "usb2_ch3";
-		function = "usb2_ch3";
-	};
-};
-
-&rcar_sound {
-	ports {
-		/* rsnd_port0/1 are described in salvator-common.dtsi */
-		rsnd_port2: port@2 {
-			reg = <2>;
-			rsnd_endpoint2: endpoint {
-				remote-endpoint = <&dw_hdmi1_snd_in>;
-
-				dai-format = "i2s";
-				bitclock-master = <&rsnd_endpoint2>;
-				frame-master = <&rsnd_endpoint2>;
-
-				playback = <&ssi3>;
-			};
-		};
-	};
-};
-
-/* SW12-7 must be set 'Off' (MD12 set to 1) which is not the default! */
-&sata {
-	status = "okay";
-};
-
-&sound_card {
-	dais = <&rsnd_port0	/* ak4613 */
-		&rsnd_port1	/* HDMI0  */
-		&rsnd_port2>;	/* HDMI1  */
-};
-
-&usb2_phy2 {
-	pinctrl-0 = <&usb2_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&usb2_phy3 {
-	pinctrl-0 = <&usb2_ch3_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};