diff options
Diffstat (limited to 'arch/sh/boards/se')
25 files changed, 764 insertions, 515 deletions
diff --git a/arch/sh/boards/se/7300/io.c b/arch/sh/boards/se/7300/io.c index f449a94ddffd..8a03d7a52a7c 100644 --- a/arch/sh/boards/se/7300/io.c +++ b/arch/sh/boards/se/7300/io.c @@ -9,8 +9,8 @@ */ #include <linux/kernel.h> -#include <asm/mach/se7300.h> #include <asm/io.h> +#include <asm/se7300.h> #define badio(fn, a) panic("bad i/o operation %s for %08lx.", #fn, a) @@ -99,6 +99,7 @@ bad_outb(struct iop *p, unsigned char value, unsigned long port) badio(inw, port); } +#ifdef CONFIG_SMC91X /* MSTLANEX01 LAN at 0xb400:0000 */ static struct iop laniop = { .start = 0x300, @@ -110,6 +111,7 @@ static struct iop laniop = { .outb = simple_outb, .outw = simple_outw, }; +#endif /* NE2000 pc card NIC */ static struct iop neiop = { @@ -123,6 +125,7 @@ static struct iop neiop = { .outw = simple_outw, }; +#ifdef CONFIG_IDE /* CF in CF slot */ static struct iop cfiop = { .base = 0xb0600000, @@ -132,12 +135,13 @@ static struct iop cfiop = { .outb = pcc_outb, .outw = simple_outw, }; +#endif static __inline__ struct iop * port2iop(unsigned long port) { if (0) ; -#if defined(CONFIG_SMC91111) +#if defined(CONFIG_SMC91X) else if (laniop.check(&laniop, port)) return &laniop; #endif diff --git a/arch/sh/boards/se/7300/irq.c b/arch/sh/boards/se/7300/irq.c index 216a78d1a108..ad1034f98a29 100644 --- a/arch/sh/boards/se/7300/irq.c +++ b/arch/sh/boards/se/7300/irq.c @@ -11,7 +11,7 @@ #include <linux/irq.h> #include <asm/irq.h> #include <asm/io.h> -#include <asm/mach/se7300.h> +#include <asm/se7300.h> /* * Initialize IRQ setting diff --git a/arch/sh/boards/se/7300/led.c b/arch/sh/boards/se/7300/led.c index ad51f0a9c1e3..4d03bb7774be 100644 --- a/arch/sh/boards/se/7300/led.c +++ b/arch/sh/boards/se/7300/led.c @@ -12,24 +12,10 @@ */ #include <linux/sched.h> -#include <asm/mach/se7300.h> - -static void -mach_led(int position, int value) -{ - volatile unsigned short *p = (volatile unsigned short *) PA_LED; - - if (value) { - *p |= (1 << 8); - } else { - *p &= ~(1 << 8); - } -} - +#include <asm/se7300.h> /* Cycle the LED's in the clasic Knightrider/Sun pattern */ -void -heartbeat_7300se(void) +void heartbeat_7300se(void) { static unsigned int cnt = 0, period = 0; volatile unsigned short *p = (volatile unsigned short *) PA_LED; diff --git a/arch/sh/boards/se/7300/setup.c b/arch/sh/boards/se/7300/setup.c index ebcd98d4c081..6f082a722d42 100644 --- a/arch/sh/boards/se/7300/setup.c +++ b/arch/sh/boards/se/7300/setup.c @@ -9,23 +9,16 @@ #include <linux/init.h> #include <asm/machvec.h> -#include <asm/machvec_init.h> -#include <asm/mach/io.h> +#include <asm/se7300.h> void heartbeat_7300se(void); void init_7300se_IRQ(void); -const char * -get_system_type(void) -{ - return "SolutionEngine 7300"; -} - /* * The Machine Vector */ - struct sh_machine_vector mv_7300se __initmv = { + .mv_name = "SolutionEngine 7300", .mv_nr_irqs = 109, .mv_inb = sh7300se_inb, .mv_inw = sh7300se_inw, @@ -53,13 +46,4 @@ struct sh_machine_vector mv_7300se __initmv = { .mv_heartbeat = heartbeat_7300se, #endif }; - ALIAS_MV(7300se) -/* - * Initialize the board - */ -void __init -platform_setup(void) -{ - -} diff --git a/arch/sh/boards/se/73180/io.c b/arch/sh/boards/se/73180/io.c index 755df5ac4a4e..72715575458b 100644 --- a/arch/sh/boards/se/73180/io.c +++ b/arch/sh/boards/se/73180/io.c @@ -99,6 +99,7 @@ bad_outb(struct iop *p, unsigned char value, unsigned long port) badio(inw, port); } +#ifdef CONFIG_SMC91X /* MSTLANEX01 LAN at 0xb400:0000 */ static struct iop laniop = { .start = 0x300, @@ -110,6 +111,7 @@ static struct iop laniop = { .outb = simple_outb, .outw = simple_outw, }; +#endif /* NE2000 pc card NIC */ static struct iop neiop = { @@ -123,6 +125,7 @@ static struct iop neiop = { .outw = simple_outw, }; +#ifdef CONFIG_IDE /* CF in CF slot */ static struct iop cfiop = { .base = 0xb0600000, @@ -132,12 +135,13 @@ static struct iop cfiop = { .outb = pcc_outb, .outw = simple_outw, }; +#endif static __inline__ struct iop * port2iop(unsigned long port) { if (0) ; -#if defined(CONFIG_SMC91111) +#if defined(CONFIG_SMC91X) else if (laniop.check(&laniop, port)) return &laniop; #endif diff --git a/arch/sh/boards/se/73180/irq.c b/arch/sh/boards/se/73180/irq.c index 4344d0ef24aa..2c62b8ea350e 100644 --- a/arch/sh/boards/se/73180/irq.c +++ b/arch/sh/boards/se/73180/irq.c @@ -7,7 +7,6 @@ * Modified for SH-Mobile SolutionEngine 73180 Support * by YOSHII Takashi <yoshii-takashi@hitachi-ul.co.jp> * - * */ #include <linux/init.h> @@ -17,14 +16,6 @@ #include <asm/mach/se73180.h> static int -intreq2irq(int i) -{ - if (i == 5) - return 10; - return 32 + 7 - i; -} - -static int irq2intreq(int irq) { if (irq == 10) diff --git a/arch/sh/boards/se/73180/led.c b/arch/sh/boards/se/73180/led.c index 610439fde6ee..4b72e9a3ead9 100644 --- a/arch/sh/boards/se/73180/led.c +++ b/arch/sh/boards/se/73180/led.c @@ -14,21 +14,8 @@ #include <linux/sched.h> #include <asm/mach/se73180.h> -static void -mach_led(int position, int value) -{ - volatile unsigned short *p = (volatile unsigned short *) PA_LED; - - if (value) { - *p |= (1 << LED_SHIFT); - } else { - *p &= ~(1 << LED_SHIFT); - } -} - /* Cycle the LED's in the clasic Knightrider/Sun pattern */ -void -heartbeat_73180se(void) +void heartbeat_73180se(void) { static unsigned int cnt = 0, period = 0; volatile unsigned short *p = (volatile unsigned short *) PA_LED; diff --git a/arch/sh/boards/se/73180/setup.c b/arch/sh/boards/se/73180/setup.c index cdb7b5f8d942..b38ef50a160a 100644 --- a/arch/sh/boards/se/73180/setup.c +++ b/arch/sh/boards/se/73180/setup.c @@ -11,23 +11,17 @@ #include <linux/init.h> #include <asm/machvec.h> -#include <asm/machvec_init.h> -#include <asm/mach/io.h> +#include <asm/se73180.h> +#include <asm/irq.h> void heartbeat_73180se(void); void init_73180se_IRQ(void); -const char * -get_system_type(void) -{ - return "SolutionEngine 73180"; -} - /* * The Machine Vector */ - struct sh_machine_vector mv_73180se __initmv = { + .mv_name = "SolutionEngine 73180", .mv_nr_irqs = 108, .mv_inb = sh73180se_inb, .mv_inw = sh73180se_inw, @@ -51,17 +45,9 @@ struct sh_machine_vector mv_73180se __initmv = { .mv_outsl = sh73180se_outsl, .mv_init_irq = init_73180se_IRQ, + .mv_irq_demux = shmse_irq_demux, #ifdef CONFIG_HEARTBEAT .mv_heartbeat = heartbeat_73180se, #endif }; - ALIAS_MV(73180se) -/* - * Initialize the board - */ -void __init -platform_setup(void) -{ - -} diff --git a/arch/sh/boards/se/7343/Makefile b/arch/sh/boards/se/7343/Makefile new file mode 100644 index 000000000000..4291069c0b4f --- /dev/null +++ b/arch/sh/boards/se/7343/Makefile @@ -0,0 +1,7 @@ +# +# Makefile for the 7343 SolutionEngine specific parts of the kernel +# + +obj-y := setup.o io.o irq.o + +obj-$(CONFIG_HEARTBEAT) += led.o diff --git a/arch/sh/boards/se/7343/io.c b/arch/sh/boards/se/7343/io.c new file mode 100644 index 000000000000..646661a146ad --- /dev/null +++ b/arch/sh/boards/se/7343/io.c @@ -0,0 +1,275 @@ +/* + * arch/sh/boards/se/7343/io.c + * + * I/O routine for SH-Mobile3AS 7343 SolutionEngine. + * + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <asm/io.h> +#include <asm/mach/se7343.h> + +#define badio(fn, a) panic("bad i/o operation %s for %08lx.", #fn, a) + +struct iop { + unsigned long start, end; + unsigned long base; + struct iop *(*check) (struct iop * p, unsigned long port); + unsigned char (*inb) (struct iop * p, unsigned long port); + unsigned short (*inw) (struct iop * p, unsigned long port); + void (*outb) (struct iop * p, unsigned char value, unsigned long port); + void (*outw) (struct iop * p, unsigned short value, unsigned long port); +}; + +struct iop * +simple_check(struct iop *p, unsigned long port) +{ + static int count; + + if (count < 100) + count++; + + port &= 0xFFFF; + + if ((p->start <= port) && (port <= p->end)) + return p; + else + badio(check, port); +} + +struct iop * +ide_check(struct iop *p, unsigned long port) +{ + if (((0x1f0 <= port) && (port <= 0x1f7)) || (port == 0x3f7)) + return p; + return NULL; +} + +unsigned char +simple_inb(struct iop *p, unsigned long port) +{ + return *(unsigned char *) (p->base + port); +} + +unsigned short +simple_inw(struct iop *p, unsigned long port) +{ + return *(unsigned short *) (p->base + port); +} + +void +simple_outb(struct iop *p, unsigned char value, unsigned long port) +{ + *(unsigned char *) (p->base + port) = value; +} + +void +simple_outw(struct iop *p, unsigned short value, unsigned long port) +{ + *(unsigned short *) (p->base + port) = value; +} + +unsigned char +pcc_inb(struct iop *p, unsigned long port) +{ + unsigned long addr = p->base + port + 0x40000; + unsigned long v; + + if (port & 1) + addr += 0x00400000; + v = *(volatile unsigned char *) addr; + return v; +} + +void +pcc_outb(struct iop *p, unsigned char value, unsigned long port) +{ + unsigned long addr = p->base + port + 0x40000; + + if (port & 1) + addr += 0x00400000; + *(volatile unsigned char *) addr = value; +} + +unsigned char +bad_inb(struct iop *p, unsigned long port) +{ + badio(inb, port); +} + +void +bad_outb(struct iop *p, unsigned char value, unsigned long port) +{ + badio(inw, port); +} + +#ifdef CONFIG_SMC91X +/* MSTLANEX01 LAN at 0xb400:0000 */ +static struct iop laniop = { + .start = 0x00, + .end = 0x0F, + .base = 0x04000000, + .check = simple_check, + .inb = simple_inb, + .inw = simple_inw, + .outb = simple_outb, + .outw = simple_outw, +}; +#endif + +#ifdef CONFIG_NE2000 +/* NE2000 pc card NIC */ +static struct iop neiop = { + .start = 0x280, + .end = 0x29f, + .base = 0xb0600000 + 0x80, /* soft 0x280 -> hard 0x300 */ + .check = simple_check, + .inb = pcc_inb, + .inw = simple_inw, + .outb = pcc_outb, + .outw = simple_outw, +}; +#endif + +#ifdef CONFIG_IDE +/* CF in CF slot */ +static struct iop cfiop = { + .base = 0xb0600000, + .check = ide_check, + .inb = pcc_inb, + .inw = simple_inw, + .outb = pcc_outb, + .outw = simple_outw, +}; +#endif + +static __inline__ struct iop * +port2iop(unsigned long port) +{ + if (0) ; +#if defined(CONFIG_SMC91X) + else if (laniop.check(&laniop, port)) + return &laniop; +#endif +#if defined(CONFIG_NE2000) + else if (neiop.check(&neiop, port)) + return &neiop; +#endif +#if defined(CONFIG_IDE) + else if (cfiop.check(&cfiop, port)) + return &cfiop; +#endif + else + return NULL; +} + +static inline void +delay(void) +{ + ctrl_inw(0xac000000); + ctrl_inw(0xac000000); +} + +unsigned char +sh7343se_inb(unsigned long port) +{ + struct iop *p = port2iop(port); + return (p->inb) (p, port); +} + +unsigned char +sh7343se_inb_p(unsigned long port) +{ + unsigned char v = sh7343se_inb(port); + delay(); + return v; +} + +unsigned short +sh7343se_inw(unsigned long port) +{ + struct iop *p = port2iop(port); + return (p->inw) (p, port); +} + +unsigned int +sh7343se_inl(unsigned long port) +{ + badio(inl, port); +} + +void +sh7343se_outb(unsigned char value, unsigned long port) +{ + struct iop *p = port2iop(port); + (p->outb) (p, value, port); +} + +void +sh7343se_outb_p(unsigned char value, unsigned long port) +{ + sh7343se_outb(value, port); + delay(); +} + +void +sh7343se_outw(unsigned short value, unsigned long port) +{ + struct iop *p = port2iop(port); + (p->outw) (p, value, port); +} + +void +sh7343se_outl(unsigned int value, unsigned long port) +{ + badio(outl, port); +} + +void +sh7343se_insb(unsigned long port, void *addr, unsigned long count) +{ + unsigned char *a = addr; + struct iop *p = port2iop(port); + while (count--) + *a++ = (p->inb) (p, port); +} + +void +sh7343se_insw(unsigned long port, void *addr, unsigned long count) +{ + unsigned short *a = addr; + struct iop *p = port2iop(port); + while (count--) + *a++ = (p->inw) (p, port); +} + +void +sh7343se_insl(unsigned long port, void *addr, unsigned long count) +{ + badio(insl, port); +} + +void +sh7343se_outsb(unsigned long port, const void *addr, unsigned long count) +{ + unsigned char *a = (unsigned char *) addr; + struct iop *p = port2iop(port); + while (count--) + (p->outb) (p, *a++, port); +} + +void +sh7343se_outsw(unsigned long port, const void *addr, unsigned long count) +{ + unsigned short *a = (unsigned short *) addr; + struct iop *p = port2iop(port); + while (count--) + (p->outw) (p, *a++, port); +} + +void +sh7343se_outsl(unsigned long port, const void *addr, unsigned long count) +{ + badio(outsw, port); +} diff --git a/arch/sh/boards/se/7343/irq.c b/arch/sh/boards/se/7343/irq.c new file mode 100644 index 000000000000..b41e3d4ea37c --- /dev/null +++ b/arch/sh/boards/se/7343/irq.c @@ -0,0 +1,193 @@ +/* + * arch/sh/boards/se/7343/irq.c + * + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <asm/irq.h> +#include <asm/io.h> +#include <asm/mach/se7343.h> + +static void +disable_intreq_irq(unsigned int irq) +{ + int bit = irq - OFFCHIP_IRQ_BASE; + u16 val; + + val = ctrl_inw(PA_CPLD_IMSK); + val |= 1 << bit; + ctrl_outw(val, PA_CPLD_IMSK); +} + +static void +enable_intreq_irq(unsigned int irq) +{ + int bit = irq - OFFCHIP_IRQ_BASE; + u16 val; + + val = ctrl_inw(PA_CPLD_IMSK); + val &= ~(1 << bit); + ctrl_outw(val, PA_CPLD_IMSK); +} + +static void +mask_and_ack_intreq_irq(unsigned int irq) +{ + disable_intreq_irq(irq); +} + +static unsigned int +startup_intreq_irq(unsigned int irq) +{ + enable_intreq_irq(irq); + return 0; +} + +static void +shutdown_intreq_irq(unsigned int irq) +{ + disable_intreq_irq(irq); +} + +static void +end_intreq_irq(unsigned int irq) +{ + if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) + enable_intreq_irq(irq); +} + +static struct hw_interrupt_type intreq_irq_type = { + .typename = "FPGA-IRQ", + .startup = startup_intreq_irq, + .shutdown = shutdown_intreq_irq, + .enable = enable_intreq_irq, + .disable = disable_intreq_irq, + .ack = mask_and_ack_intreq_irq, + .end = end_intreq_irq +}; + +static void +make_intreq_irq(unsigned int irq) +{ + disable_irq_nosync(irq); + irq_desc[irq].handler = &intreq_irq_type; + disable_intreq_irq(irq); +} + +int +shmse_irq_demux(int irq) +{ + int bit; + volatile u16 val; + + if (irq == IRQ5_IRQ) { + /* Read status Register */ + val = ctrl_inw(PA_CPLD_ST); + bit = ffs(val); + if (bit != 0) + return OFFCHIP_IRQ_BASE + bit - 1; + } + return irq; +} + +/* IRQ5 is multiplexed between the following sources: + * 1. PC Card socket + * 2. Extension slot + * 3. USB Controller + * 4. Serial Controller + * + * We configure IRQ5 as a cascade IRQ. + */ +static struct irqaction irq5 = { no_action, 0, CPU_MASK_NONE, "IRQ5-cascade", + NULL, NULL}; + +/* + * Initialize IRQ setting + */ +void __init +init_7343se_IRQ(void) +{ + /* Setup Multiplexed interrupts */ + ctrl_outw(8, PA_CPLD_MODESET); /* Set all CPLD interrupts to active + * low. + */ + /* Mask all CPLD controller interrupts */ + ctrl_outw(0x0fff, PA_CPLD_IMSK); + + /* PC Card interrupts */ + make_intreq_irq(PC_IRQ0); + make_intreq_irq(PC_IRQ1); + make_intreq_irq(PC_IRQ2); + make_intreq_irq(PC_IRQ3); + + /* Extension Slot Interrupts */ + make_intreq_irq(EXT_IRQ0); + make_intreq_irq(EXT_IRQ1); + make_intreq_irq(EXT_IRQ2); + make_intreq_irq(EXT_IRQ3); + + /* USB Controller interrupts */ + make_intreq_irq(USB_IRQ0); + make_intreq_irq(USB_IRQ1); + + /* Serial Controller interrupts */ + make_intreq_irq(UART_IRQ0); + make_intreq_irq(UART_IRQ1); + + /* Setup all external interrupts to be active low */ + ctrl_outw(0xaaaa, INTC_ICR1); + + make_ipr_irq(IRQ5_IRQ, IRQ5_IPR_ADDR+2, IRQ5_IPR_POS, IRQ5_PRIORITY); + setup_irq(IRQ5_IRQ, &irq5); + /* Set port control to use IRQ5 */ + *(u16 *)0xA4050108 &= ~0xc; + + make_ipr_irq(SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY); + make_ipr_irq(VPU_IRQ, VPU_IPR_ADDR, VPU_IPR_POS, 8); + + ctrl_outb(0x0f, INTC_IMCR5); /* enable SCIF IRQ */ + + make_ipr_irq(DMTE0_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY); + make_ipr_irq(DMTE1_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY); + make_ipr_irq(DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY); + make_ipr_irq(DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY); + make_ipr_irq(DMTE4_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY); + make_ipr_irq(DMTE5_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY); + + /* I2C block */ + make_ipr_irq(IIC0_ALI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY); + make_ipr_irq(IIC0_TACKI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, + IIC0_PRIORITY); + make_ipr_irq(IIC0_WAITI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, + IIC0_PRIORITY); + make_ipr_irq(IIC0_DTEI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY); + + make_ipr_irq(IIC1_ALI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY); + make_ipr_irq(IIC1_TACKI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, + IIC1_PRIORITY); + make_ipr_irq(IIC1_WAITI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, + IIC1_PRIORITY); + make_ipr_irq(IIC1_DTEI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY); + + /* SIOF */ + make_ipr_irq(SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY); + + /* SIU */ + make_ipr_irq(SIU_IRQ, SIU_IPR_ADDR, SIU_IPR_POS, SIU_PRIORITY); + + /* VIO interrupt */ + make_ipr_irq(CEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY); + make_ipr_irq(BEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY); + make_ipr_irq(VEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY); + + /*MFI interrupt*/ + + make_ipr_irq(MFI_IRQ, MFI_IPR_ADDR, MFI_IPR_POS, MFI_PRIORITY); + + /* LCD controller */ + make_ipr_irq(LCDC_IRQ, LCDC_IPR_ADDR, LCDC_IPR_POS, LCDC_PRIORITY); + ctrl_outw(0x2000, PA_MRSHPC + 0x0c); /* mrshpc irq enable */ +} diff --git a/arch/sh/boards/se/7343/led.c b/arch/sh/boards/se/7343/led.c new file mode 100644 index 000000000000..6a439cf83e46 --- /dev/null +++ b/arch/sh/boards/se/7343/led.c @@ -0,0 +1,46 @@ +/* + * arch/sh/boards/se/7343/led.c + * + */ + +#include <linux/config.h> +#include <linux/sched.h> +#include <asm/mach/se7343.h> + +/* Cycle the LED's in the clasic Knightrider/Sun pattern */ +void heartbeat_7343se(void) +{ + static unsigned int cnt = 0, period = 0; + volatile unsigned short *p = (volatile unsigned short *) PA_LED; + static unsigned bit = 0, up = 1; + + cnt += 1; + if (cnt < period) { + return; + } + + cnt = 0; + + /* Go through the points (roughly!): + * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110 + */ + period = 110 - ((300 << FSHIFT) / ((avenrun[0] / 5) + (3 << FSHIFT))); + + if (up) { + if (bit == 7) { + bit--; + up = 0; + } else { + bit++; + } + } else { + if (bit == 0) { + bit++; + up = 1; + } else { + bit--; + } + } + *p = 1 << (bit + LED_SHIFT); + +} diff --git a/arch/sh/boards/se/7343/setup.c b/arch/sh/boards/se/7343/setup.c new file mode 100644 index 000000000000..787322291fb3 --- /dev/null +++ b/arch/sh/boards/se/7343/setup.c @@ -0,0 +1,84 @@ +#include <linux/config.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <asm/machvec.h> +#include <asm/mach/se7343.h> +#include <asm/irq.h> + +void heartbeat_7343se(void); +void init_7343se_IRQ(void); + +static struct resource smc91x_resources[] = { + [0] = { + .start = 0x10000000, + .end = 0x1000000F, + .flags = IORESOURCE_MEM, + }, + [1] = { + /* + * shared with other devices via externel + * interrupt controller in FPGA... + */ + .start = EXT_IRQ2, + .end = EXT_IRQ2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = 0, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; + +static struct platform_device *smc91x_platform_devices[] __initdata = { + &smc91x_device, +}; + +static int __init sh7343se_devices_setup(void) +{ + return platform_add_devices(smc91x_platform_devices, + ARRAY_SIZE(smc91x_platform_devices)); +} + +static void __init sh7343se_setup(char **cmdline_p) +{ + device_initcall(sh7343se_devices_setup); +} + +/* + * The Machine Vector + */ +struct sh_machine_vector mv_7343se __initmv = { + .mv_name = "SolutionEngine 7343", + .mv_setup = sh7343se_setup, + .mv_nr_irqs = 108, + .mv_inb = sh7343se_inb, + .mv_inw = sh7343se_inw, + .mv_inl = sh7343se_inl, + .mv_outb = sh7343se_outb, + .mv_outw = sh7343se_outw, + .mv_outl = sh7343se_outl, + + .mv_inb_p = sh7343se_inb_p, + .mv_inw_p = sh7343se_inw, + .mv_inl_p = sh7343se_inl, + .mv_outb_p = sh7343se_outb_p, + .mv_outw_p = sh7343se_outw, + .mv_outl_p = sh7343se_outl, + + .mv_insb = sh7343se_insb, + .mv_insw = sh7343se_insw, + .mv_insl = sh7343se_insl, + .mv_outsb = sh7343se_outsb, + .mv_outsw = sh7343se_outsw, + .mv_outsl = sh7343se_outsl, + + .mv_init_irq = init_7343se_IRQ, + .mv_irq_demux = shmse_irq_demux, +#ifdef CONFIG_HEARTBEAT + .mv_heartbeat = heartbeat_7343se, +#endif +}; +ALIAS_MV(7343se) diff --git a/arch/sh/boards/se/770x/Makefile b/arch/sh/boards/se/770x/Makefile index be89a73cc418..9a5035f80ec0 100644 --- a/arch/sh/boards/se/770x/Makefile +++ b/arch/sh/boards/se/770x/Makefile @@ -2,5 +2,5 @@ # Makefile for the 770x SolutionEngine specific parts of the kernel # -obj-y := mach.o setup.o io.o irq.o led.o - +obj-y := setup.o io.o irq.o +obj-$(CONFIG_HEARTBEAT) += led.o diff --git a/arch/sh/boards/se/770x/io.c b/arch/sh/boards/se/770x/io.c index 9a39ee963143..9941949331ab 100644 --- a/arch/sh/boards/se/770x/io.c +++ b/arch/sh/boards/se/770x/io.c @@ -1,4 +1,4 @@ -/* $Id: io.c,v 1.5 2004/02/22 23:08:43 kkojima Exp $ +/* $Id: io.c,v 1.7 2006/02/05 21:55:29 lethal Exp $ * * linux/arch/sh/kernel/io_se.c * @@ -11,7 +11,7 @@ #include <linux/kernel.h> #include <linux/types.h> #include <asm/io.h> -#include <asm/se/se.h> +#include <asm/se.h> /* SH pcmcia io window base, start and end. */ int sh_pcic_io_wbase = 0xb8400000; @@ -20,11 +20,6 @@ int sh_pcic_io_stop; int sh_pcic_io_type; int sh_pcic_io_dummy; -static inline void delay(void) -{ - ctrl_inw(0xa0000000); -} - /* MS7750 requires special versions of in*, out* routines, since PC-like io ports are located at upper half byte of 16-bit word which can be accessed only with 16-bit wide. */ @@ -52,10 +47,6 @@ shifted_port(unsigned long port) return 1; } -#define maybebadio(name,port) \ - printk("bad PC-like io %s for port 0x%lx at 0x%08x\n", \ - #name, (port), (__u32) __builtin_return_address(0)) - unsigned char se_inb(unsigned long port) { if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop) @@ -76,7 +67,7 @@ unsigned char se_inb_p(unsigned long port) v = (*port2adr(port) >> 8); else v = (*port2adr(port))&0xff; - delay(); + ctrl_delay(); return v; } @@ -86,13 +77,13 @@ unsigned short se_inw(unsigned long port) (sh_pcic_io_start <= port && port <= sh_pcic_io_stop)) return *port2adr(port); else - maybebadio(inw, port); + maybebadio(port); return 0; } unsigned int se_inl(unsigned long port) { - maybebadio(inl, port); + maybebadio(port); return 0; } @@ -114,7 +105,7 @@ void se_outb_p(unsigned char value, unsigned long port) *(port2adr(port)) = value << 8; else *(port2adr(port)) = value; - delay(); + ctrl_delay(); } void se_outw(unsigned short value, unsigned long port) @@ -123,12 +114,12 @@ void se_outw(unsigned short value, unsigned long port) (sh_pcic_io_start <= port && port <= sh_pcic_io_stop)) *port2adr(port) = value; else - maybebadio(outw, port); + maybebadio(port); } void se_outl(unsigned int value, unsigned long port) { - maybebadio(outl, port); + maybebadio(port); } void se_insb(unsigned long port, void *addr, unsigned long count) @@ -159,7 +150,7 @@ void se_insw(unsigned long port, void *addr, unsigned long count) void se_insl(unsigned long port, void *addr, unsigned long count) { - maybebadio(insl, port); + maybebadio(port); } void se_outsb(unsigned long port, const void *addr, unsigned long count) @@ -190,37 +181,5 @@ void se_outsw(unsigned long port, const void *addr, unsigned long count) void se_outsl(unsigned long port, const void *addr, unsigned long count) { - maybebadio(outsw, port); -} - -/* Map ISA bus address to the real address. Only for PCMCIA. */ - -/* ISA page descriptor. */ -static __u32 sh_isa_memmap[256]; - -static int -sh_isa_mmap(__u32 start, __u32 length, __u32 offset) -{ - int idx; - - if (start >= 0x100000 || (start & 0xfff) || (length != 0x1000)) - return -1; - - idx = start >> 12; - sh_isa_memmap[idx] = 0xb8000000 + (offset &~ 0xfff); -#if 0 - printk("sh_isa_mmap: start %x len %x offset %x (idx %x paddr %x)\n", - start, length, offset, idx, sh_isa_memmap[idx]); -#endif - return 0; -} - -unsigned long -se_isa_port2addr(unsigned long offset) -{ - int idx; - - idx = (offset >> 12) & 0xff; - offset &= 0xfff; - return sh_isa_memmap[idx] + offset; + maybebadio(port); } diff --git a/arch/sh/boards/se/770x/irq.c b/arch/sh/boards/se/770x/irq.c index 3e558716ce10..cff6700bbafd 100644 --- a/arch/sh/boards/se/770x/irq.c +++ b/arch/sh/boards/se/770x/irq.c @@ -11,7 +11,7 @@ #include <linux/irq.h> #include <asm/irq.h> #include <asm/io.h> -#include <asm/se/se.h> +#include <asm/se.h> /* * Initialize IRQ setting diff --git a/arch/sh/boards/se/770x/led.c b/arch/sh/boards/se/770x/led.c index 3cddbda025fc..daf7b1ee786a 100644 --- a/arch/sh/boards/se/770x/led.c +++ b/arch/sh/boards/se/770x/led.c @@ -9,22 +9,8 @@ * This file contains Solution Engine specific LED code. */ -#include <asm/se/se.h> - -static void mach_led(int position, int value) -{ - volatile unsigned short* p = (volatile unsigned short*)PA_LED; - - if (value) { - *p |= (1<<8); - } else { - *p &= ~(1<<8); - } -} - -#ifdef CONFIG_HEARTBEAT - #include <linux/sched.h> +#include <asm/se.h> /* Cycle the LED's in the clasic Knightrider/Sun pattern */ void heartbeat_se(void) @@ -64,4 +50,3 @@ void heartbeat_se(void) *p = 1<<(bit+8); } -#endif /* CONFIG_HEARTBEAT */ diff --git a/arch/sh/boards/se/770x/mach.c b/arch/sh/boards/se/770x/mach.c deleted file mode 100644 index 6ec07bd3dcf1..000000000000 --- a/arch/sh/boards/se/770x/mach.c +++ /dev/null @@ -1,67 +0,0 @@ -/* - * linux/arch/sh/kernel/mach_se.c - * - * Copyright (C) 2000 Stuart Menefy (stuart.menefy@st.com) - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * Machine vector for the Hitachi SolutionEngine - */ - -#include <linux/init.h> - -#include <asm/machvec.h> -#include <asm/rtc.h> -#include <asm/machvec_init.h> - -#include <asm/se/io.h> - -void heartbeat_se(void); -void setup_se(void); -void init_se_IRQ(void); - -/* - * The Machine Vector - */ - -struct sh_machine_vector mv_se __initmv = { -#if defined(CONFIG_CPU_SH4) - .mv_nr_irqs = 48, -#elif defined(CONFIG_CPU_SUBTYPE_SH7708) - .mv_nr_irqs = 32, -#elif defined(CONFIG_CPU_SUBTYPE_SH7709) - .mv_nr_irqs = 61, -#elif defined(CONFIG_CPU_SUBTYPE_SH7705) - .mv_nr_irqs = 86, -#endif - - .mv_inb = se_inb, - .mv_inw = se_inw, - .mv_inl = se_inl, - .mv_outb = se_outb, - .mv_outw = se_outw, - .mv_outl = se_outl, - - .mv_inb_p = se_inb_p, - .mv_inw_p = se_inw, - .mv_inl_p = se_inl, - .mv_outb_p = se_outb_p, - .mv_outw_p = se_outw, - .mv_outl_p = se_outl, - - .mv_insb = se_insb, - .mv_insw = se_insw, - .mv_insl = se_insl, - .mv_outsb = se_outsb, - .mv_outsw = se_outsw, - .mv_outsl = se_outsl, - - .mv_isa_port2addr = se_isa_port2addr, - - .mv_init_irq = init_se_IRQ, -#ifdef CONFIG_HEARTBEAT - .mv_heartbeat = heartbeat_se, -#endif -}; -ALIAS_MV(se) diff --git a/arch/sh/boards/se/770x/setup.c b/arch/sh/boards/se/770x/setup.c index 7d1a071727cc..f3f82b7c8217 100644 --- a/arch/sh/boards/se/770x/setup.c +++ b/arch/sh/boards/se/770x/setup.c @@ -7,15 +7,17 @@ * Hitachi SolutionEngine Support. * */ - #include <linux/init.h> #include <linux/irq.h> - #include <linux/hdreg.h> #include <linux/ide.h> #include <asm/io.h> -#include <asm/se/se.h> -#include <asm/se/smc37c93x.h> +#include <asm/se.h> +#include <asm/smc37c93x.h> +#include <asm/machvec.h> + +void heartbeat_se(void); +void init_se_IRQ(void); /* * Configure the Super I/O chip @@ -26,7 +28,8 @@ static void __init smsc_config(int index, int data) outb_p(data, DATA_PORT); } -static void __init init_smsc(void) +/* XXX: Another candidate for a more generic cchip machine vector */ +static void __init smsc_setup(char **cmdline_p) { outb_p(CONFIG_ENTER, CONFIG_PORT); outb_p(CONFIG_ENTER, CONFIG_PORT); @@ -69,16 +72,46 @@ static void __init init_smsc(void) outb_p(CONFIG_EXIT, CONFIG_PORT); } -const char *get_system_type(void) -{ - return "SolutionEngine"; -} - /* - * Initialize the board + * The Machine Vector */ -void __init platform_setup(void) -{ - init_smsc(); - /* XXX: RTC setting comes here */ -} +struct sh_machine_vector mv_se __initmv = { + .mv_name = "SolutionEngine", + .mv_setup = smsc_setup, +#if defined(CONFIG_CPU_SH4) + .mv_nr_irqs = 48, +#elif defined(CONFIG_CPU_SUBTYPE_SH7708) + .mv_nr_irqs = 32, +#elif defined(CONFIG_CPU_SUBTYPE_SH7709) + .mv_nr_irqs = 61, +#elif defined(CONFIG_CPU_SUBTYPE_SH7705) + .mv_nr_irqs = 86, +#endif + + .mv_inb = se_inb, + .mv_inw = se_inw, + .mv_inl = se_inl, + .mv_outb = se_outb, + .mv_outw = se_outw, + .mv_outl = se_outl, + + .mv_inb_p = se_inb_p, + .mv_inw_p = se_inw, + .mv_inl_p = se_inl, + .mv_outb_p = se_outb_p, + .mv_outw_p = se_outw, + .mv_outl_p = se_outl, + + .mv_insb = se_insb, + .mv_insw = se_insw, + .mv_insl = se_insl, + .mv_outsb = se_outsb, + .mv_outsw = se_outsw, + .mv_outsl = se_outsl, + + .mv_init_irq = init_se_IRQ, +#ifdef CONFIG_HEARTBEAT + .mv_heartbeat = heartbeat_se, +#endif +}; +ALIAS_MV(se) diff --git a/arch/sh/boards/se/7751/Makefile b/arch/sh/boards/se/7751/Makefile index ce7ca247f84d..188900c48321 100644 --- a/arch/sh/boards/se/7751/Makefile +++ b/arch/sh/boards/se/7751/Makefile @@ -2,7 +2,7 @@ # Makefile for the 7751 SolutionEngine specific parts of the kernel # -obj-y := mach.o setup.o io.o irq.o led.o +obj-y := setup.o io.o irq.o obj-$(CONFIG_PCI) += pci.o - +obj-$(CONFIG_HEARTBEAT) += led.o diff --git a/arch/sh/boards/se/7751/io.c b/arch/sh/boards/se/7751/io.c index 99041b269261..e8d846cec89d 100644 --- a/arch/sh/boards/se/7751/io.c +++ b/arch/sh/boards/se/7751/io.c @@ -1,6 +1,4 @@ -/* - * linux/arch/sh/kernel/io_7751se.c - * +/* * Copyright (C) 2001 Ian da Silva, Jeremy Siegel * Based largely on io_se.c. * @@ -10,96 +8,21 @@ * placeholder code from io_se.c left in with the * expectation of later SuperIO and PCMCIA access. */ - #include <linux/kernel.h> #include <linux/types.h> +#include <linux/pci.h> #include <asm/io.h> -#include <asm/se7751/se7751.h> +#include <asm/se7751.h> #include <asm/addrspace.h> -#include <linux/pci.h> -#include "../../../drivers/pci/pci-sh7751.h" - -#if 0 -/****************************************************************** - * Variables from io_se.c, related to PCMCIA (not PCI); we're not - * compiling them in, and have removed references from functions - * which follow. [Many checked for IO ports in the range bounded - * by sh_pcic_io_start/stop, and used sh_pcic_io_wbase as offset. - * As start/stop are uninitialized, only port 0x0 would match?] - * When used, remember to adjust names to avoid clash with io_se? - *****************************************************************/ -/* SH pcmcia io window base, start and end. */ -int sh_pcic_io_wbase = 0xb8400000; -int sh_pcic_io_start; -int sh_pcic_io_stop; -int sh_pcic_io_type; -int sh_pcic_io_dummy; -/*************************************************************/ -#endif - -/* - * The 7751 Solution Engine uses the built-in PCI controller (PCIC) - * of the 7751 processor, and has a SuperIO accessible via the PCI. - * The board also includes a PCMCIA controller on its memory bus, - * like the other Solution Engine boards. - */ - -#define PCIIOBR (volatile long *)PCI_REG(SH7751_PCIIOBR) -#define PCIMBR (volatile long *)PCI_REG(SH7751_PCIMBR) -#define PCI_IO_AREA SH7751_PCI_IO_BASE -#define PCI_MEM_AREA SH7751_PCI_CONFIG_BASE - -#define PCI_IOMAP(adr) (PCI_IO_AREA + (adr & ~SH7751_PCIIOBR_MASK)) - -#define maybebadio(name,port) \ - printk("bad PC-like io %s for port 0x%lx at 0x%08x\n", \ - #name, (port), (__u32) __builtin_return_address(0)) - -static inline void delay(void) -{ - ctrl_inw(0xa0000000); -} - -static inline volatile __u16 * -port2adr(unsigned int port) +static inline volatile u16 *port2adr(unsigned int port) { if (port >= 0x2000) return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000)); -#if 0 - else - return (volatile __u16 *) (PA_SUPERIO + (port << 1)); -#endif - maybebadio(name,(unsigned long)port); + maybebadio((unsigned long)port); return (volatile __u16*)port; } -#if 0 -/* The 7751 Solution Engine seems to have everything hooked */ -/* up pretty normally (nothing on high-bytes only...) so this */ -/* shouldn't be needed */ -static inline int -shifted_port(unsigned long port) -{ - /* For IDE registers, value is not shifted */ - if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6) - return 0; - else - return 1; -} -#endif - -/* In case someone configures the kernel w/o PCI support: in that */ -/* scenario, don't ever bother to check for PCI-window addresses */ - -/* NOTE: WINDOW CHECK MAY BE A BIT OFF, HIGH PCIBIOS_MIN_IO WRAPS? */ -#if defined(CONFIG_PCI) -#define CHECK_SH7751_PCIIO(port) \ - ((port >= PCIBIOS_MIN_IO) && (port < (PCIBIOS_MIN_IO + SH7751_PCI_IO_SIZE))) -#else -#define CHECK_SH7751_PCIIO(port) (0) -#endif - /* * General outline: remap really low stuff [eventually] to SuperIO, * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO) @@ -111,10 +34,10 @@ unsigned char sh7751se_inb(unsigned long port) { if (PXSEG(port)) return *(volatile unsigned char *)port; - else if (CHECK_SH7751_PCIIO(port)) - return *(volatile unsigned char *)PCI_IOMAP(port); + else if (is_pci_ioaddr(port)) + return *(volatile unsigned char *)pci_ioaddr(port); else - return (*port2adr(port))&0xff; + return (*port2adr(port)) & 0xff; } unsigned char sh7751se_inb_p(unsigned long port) @@ -123,11 +46,11 @@ unsigned char sh7751se_inb_p(unsigned long port) if (PXSEG(port)) v = *(volatile unsigned char *)port; - else if (CHECK_SH7751_PCIIO(port)) - v = *(volatile unsigned char *)PCI_IOMAP(port); + else if (is_pci_ioaddr(port)) + v = *(volatile unsigned char *)pci_ioaddr(port); else - v = (*port2adr(port))&0xff; - delay(); + v = (*port2adr(port)) & 0xff; + ctrl_delay(); return v; } @@ -135,12 +58,12 @@ unsigned short sh7751se_inw(unsigned long port) { if (PXSEG(port)) return *(volatile unsigned short *)port; - else if (CHECK_SH7751_PCIIO(port)) - return *(volatile unsigned short *)PCI_IOMAP(port); + else if (is_pci_ioaddr(port)) + return *(volatile unsigned short *)pci_ioaddr(port); else if (port >= 0x2000) return *port2adr(port); else - maybebadio(inw, port); + maybebadio(port); return 0; } @@ -148,12 +71,12 @@ unsigned int sh7751se_inl(unsigned long port) { if (PXSEG(port)) return *(volatile unsigned long *)port; - else if (CHECK_SH7751_PCIIO(port)) - return *(volatile unsigned int *)PCI_IOMAP(port); + else if (is_pci_ioaddr(port)) + return *(volatile unsigned int *)pci_ioaddr(port); else if (port >= 0x2000) return *port2adr(port); else - maybebadio(inl, port); + maybebadio(port); return 0; } @@ -162,8 +85,8 @@ void sh7751se_outb(unsigned char value, unsigned long port) if (PXSEG(port)) *(volatile unsigned char *)port = value; - else if (CHECK_SH7751_PCIIO(port)) - *((unsigned char*)PCI_IOMAP(port)) = value; + else if (is_pci_ioaddr(port)) + *((unsigned char*)pci_ioaddr(port)) = value; else *(port2adr(port)) = value; } @@ -172,73 +95,41 @@ void sh7751se_outb_p(unsigned char value, unsigned long port) { if (PXSEG(port)) *(volatile unsigned char *)port = value; - else if (CHECK_SH7751_PCIIO(port)) - *((unsigned char*)PCI_IOMAP(port)) = value; + else if (is_pci_ioaddr(port)) + *((unsigned char*)pci_ioaddr(port)) = value; else *(port2adr(port)) = value; - delay(); + ctrl_delay(); } void sh7751se_outw(unsigned short value, unsigned long port) { if (PXSEG(port)) *(volatile unsigned short *)port = value; - else if (CHECK_SH7751_PCIIO(port)) - *((unsigned short *)PCI_IOMAP(port)) = value; + else if (is_pci_ioaddr(port)) + *((unsigned short *)pci_ioaddr(port)) = value; else if (port >= 0x2000) *port2adr(port) = value; else - maybebadio(outw, port); + maybebadio(port); } void sh7751se_outl(unsigned int value, unsigned long port) { if (PXSEG(port)) *(volatile unsigned long *)port = value; - else if (CHECK_SH7751_PCIIO(port)) - *((unsigned long*)PCI_IOMAP(port)) = value; + else if (is_pci_ioaddr(port)) + *((unsigned long*)pci_ioaddr(port)) = value; else - maybebadio(outl, port); + maybebadio(port); } void sh7751se_insl(unsigned long port, void *addr, unsigned long count) { - maybebadio(insl, port); + maybebadio(port); } void sh7751se_outsl(unsigned long port, const void *addr, unsigned long count) { - maybebadio(outsw, port); -} - -/* Map ISA bus address to the real address. Only for PCMCIA. */ - -/* ISA page descriptor. */ -static __u32 sh_isa_memmap[256]; - -#if 0 -static int -sh_isa_mmap(__u32 start, __u32 length, __u32 offset) -{ - int idx; - - if (start >= 0x100000 || (start & 0xfff) || (length != 0x1000)) - return -1; - - idx = start >> 12; - sh_isa_memmap[idx] = 0xb8000000 + (offset &~ 0xfff); - printk("sh_isa_mmap: start %x len %x offset %x (idx %x paddr %x)\n", - start, length, offset, idx, sh_isa_memmap[idx]); - return 0; -} -#endif - -unsigned long -sh7751se_isa_port2addr(unsigned long offset) -{ - int idx; - - idx = (offset >> 12) & 0xff; - offset &= 0xfff; - return sh_isa_memmap[idx] + offset; + maybebadio(port); } diff --git a/arch/sh/boards/se/7751/irq.c b/arch/sh/boards/se/7751/irq.c index bf6c023615df..c607b0a48479 100644 --- a/arch/sh/boards/se/7751/irq.c +++ b/arch/sh/boards/se/7751/irq.c @@ -12,7 +12,7 @@ #include <linux/init.h> #include <linux/irq.h> #include <asm/irq.h> -#include <asm/se7751/se7751.h> +#include <asm/se7751.h> /* * Initialize IRQ setting diff --git a/arch/sh/boards/se/7751/led.c b/arch/sh/boards/se/7751/led.c index a878726d3c7c..ff0355dea81b 100644 --- a/arch/sh/boards/se/7751/led.c +++ b/arch/sh/boards/se/7751/led.c @@ -8,23 +8,8 @@ * * This file contains Solution Engine specific LED code. */ - -#include <asm/se7751/se7751.h> - -static void mach_led(int position, int value) -{ - volatile unsigned short* p = (volatile unsigned short*)PA_LED; - - if (value) { - *p |= (1<<8); - } else { - *p &= ~(1<<8); - } -} - -#ifdef CONFIG_HEARTBEAT - #include <linux/sched.h> +#include <asm/se7751.h> /* Cycle the LED's in the clasic Knightrider/Sun pattern */ void heartbeat_7751se(void) @@ -64,4 +49,3 @@ void heartbeat_7751se(void) *p = 1<<(bit+8); } -#endif /* CONFIG_HEARTBEAT */ diff --git a/arch/sh/boards/se/7751/mach.c b/arch/sh/boards/se/7751/mach.c deleted file mode 100644 index 62d8d3e62590..000000000000 --- a/arch/sh/boards/se/7751/mach.c +++ /dev/null @@ -1,54 +0,0 @@ -/* - * linux/arch/sh/kernel/mach_7751se.c - * - * Minor tweak of mach_se.c file to reference 7751se-specific items. - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * Machine vector for the Hitachi 7751 SolutionEngine - */ - -#include <linux/init.h> - -#include <asm/machvec.h> -#include <asm/rtc.h> -#include <asm/machvec_init.h> - -#include <asm/se7751/io.h> - -void heartbeat_7751se(void); -void init_7751se_IRQ(void); - -/* - * The Machine Vector - */ - -struct sh_machine_vector mv_7751se __initmv = { - .mv_nr_irqs = 72, - - .mv_inb = sh7751se_inb, - .mv_inw = sh7751se_inw, - .mv_inl = sh7751se_inl, - .mv_outb = sh7751se_outb, - .mv_outw = sh7751se_outw, - .mv_outl = sh7751se_outl, - - .mv_inb_p = sh7751se_inb_p, - .mv_inw_p = sh7751se_inw, - .mv_inl_p = sh7751se_inl, - .mv_outb_p = sh7751se_outb_p, - .mv_outw_p = sh7751se_outw, - .mv_outl_p = sh7751se_outl, - - .mv_insl = sh7751se_insl, - .mv_outsl = sh7751se_outsl, - - .mv_isa_port2addr = sh7751se_isa_port2addr, - - .mv_init_irq = init_7751se_IRQ, -#ifdef CONFIG_HEARTBEAT - .mv_heartbeat = heartbeat_7751se, -#endif -}; -ALIAS_MV(7751se) diff --git a/arch/sh/boards/se/7751/setup.c b/arch/sh/boards/se/7751/setup.c index 48dc5aee67d4..73e826310ba8 100644 --- a/arch/sh/boards/se/7751/setup.c +++ b/arch/sh/boards/se/7751/setup.c @@ -1,4 +1,4 @@ -/* +/* * linux/arch/sh/kernel/setup_7751se.c * * Copyright (C) 2000 Kazumoto Kojima @@ -11,78 +11,15 @@ #include <linux/init.h> #include <linux/irq.h> - -#include <linux/hdreg.h> #include <linux/ide.h> #include <asm/io.h> -#include <asm/se7751/se7751.h> +#include <asm/se7751.h> -#ifdef CONFIG_SH_KGDB -#include <asm/kgdb.h> -#endif - -/* - * Configure the Super I/O chip - */ -#if 0 -/* Leftover code from regular Solution Engine, for reference. */ -/* The SH7751 Solution Engine has a different SuperIO. */ -static void __init smsc_config(int index, int data) -{ - outb_p(index, INDEX_PORT); - outb_p(data, DATA_PORT); -} - -static void __init init_smsc(void) -{ - outb_p(CONFIG_ENTER, CONFIG_PORT); - outb_p(CONFIG_ENTER, CONFIG_PORT); - - /* FDC */ - smsc_config(CURRENT_LDN_INDEX, LDN_FDC); - smsc_config(ACTIVATE_INDEX, 0x01); - smsc_config(IRQ_SELECT_INDEX, 6); /* IRQ6 */ - - /* IDE1 */ - smsc_config(CURRENT_LDN_INDEX, LDN_IDE1); - smsc_config(ACTIVATE_INDEX, 0x01); - smsc_config(IRQ_SELECT_INDEX, 14); /* IRQ14 */ - - /* AUXIO (GPIO): to use IDE1 */ - smsc_config(CURRENT_LDN_INDEX, LDN_AUXIO); - smsc_config(GPIO46_INDEX, 0x00); /* nIOROP */ - smsc_config(GPIO47_INDEX, 0x00); /* nIOWOP */ - - /* COM1 */ - smsc_config(CURRENT_LDN_INDEX, LDN_COM1); - smsc_config(ACTIVATE_INDEX, 0x01); - smsc_config(IO_BASE_HI_INDEX, 0x03); - smsc_config(IO_BASE_LO_INDEX, 0xf8); - smsc_config(IRQ_SELECT_INDEX, 4); /* IRQ4 */ - - /* COM2 */ - smsc_config(CURRENT_LDN_INDEX, LDN_COM2); - smsc_config(ACTIVATE_INDEX, 0x01); - smsc_config(IO_BASE_HI_INDEX, 0x02); - smsc_config(IO_BASE_LO_INDEX, 0xf8); - smsc_config(IRQ_SELECT_INDEX, 3); /* IRQ3 */ - - /* RTC */ - smsc_config(CURRENT_LDN_INDEX, LDN_RTC); - smsc_config(ACTIVATE_INDEX, 0x01); - smsc_config(IRQ_SELECT_INDEX, 8); /* IRQ8 */ - - /* XXX: PARPORT, KBD, and MOUSE will come here... */ - outb_p(CONFIG_EXIT, CONFIG_PORT); -} -#endif - -const char *get_system_type(void) -{ - return "7751 SolutionEngine"; -} +void heartbeat_7751se(void); +void init_7751se_IRQ(void); #ifdef CONFIG_SH_KGDB +#include <asm/kgdb.h> static int kgdb_uart_setup(void); static struct kgdb_sermap kgdb_uart_sermap = { "ttyS", 0, kgdb_uart_setup, NULL }; @@ -91,7 +28,7 @@ static struct kgdb_sermap kgdb_uart_sermap = /* * Initialize the board */ -void __init platform_setup(void) +static void __init sh7751se_setup(char **cmdline_p) { /* Call init_smsc() replacement to set up SuperIO. */ /* XXX: RTC setting comes here */ @@ -225,3 +162,37 @@ static int kgdb_uart_setup(void) return 0; } #endif /* CONFIG_SH_KGDB */ + + +/* + * The Machine Vector + */ + +struct sh_machine_vector mv_7751se __initmv = { + .mv_name = "7751 SolutionEngine", + .mv_setup = sh7751se_setup, + .mv_nr_irqs = 72, + + .mv_inb = sh7751se_inb, + .mv_inw = sh7751se_inw, + .mv_inl = sh7751se_inl, + .mv_outb = sh7751se_outb, + .mv_outw = sh7751se_outw, + .mv_outl = sh7751se_outl, + + .mv_inb_p = sh7751se_inb_p, + .mv_inw_p = sh7751se_inw, + .mv_inl_p = sh7751se_inl, + .mv_outb_p = sh7751se_outb_p, + .mv_outw_p = sh7751se_outw, + .mv_outl_p = sh7751se_outl, + + .mv_insl = sh7751se_insl, + .mv_outsl = sh7751se_outsl, + + .mv_init_irq = init_7751se_IRQ, +#ifdef CONFIG_HEARTBEAT + .mv_heartbeat = heartbeat_7751se, +#endif +}; +ALIAS_MV(7751se) |