diff options
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/arm/mach-rockchip/headsmp.S | 5 | ||||
| -rw-r--r-- | arch/arm/mach-rockchip/platsmp.c | 120 |
2 files changed, 100 insertions, 25 deletions
diff --git a/arch/arm/mach-rockchip/headsmp.S b/arch/arm/mach-rockchip/headsmp.S index 73206e360e31..46c22dedf632 100644 --- a/arch/arm/mach-rockchip/headsmp.S +++ b/arch/arm/mach-rockchip/headsmp.S @@ -16,7 +16,10 @@ #include <linux/init.h> ENTRY(rockchip_secondary_startup) - bl v7_invalidate_l1 + mrc p15, 0, r0, c0, c0, 0 @ read main ID register + ldr r1, =0x00000c09 @ Cortex-A9 primary part number + teq r0, r1 + beq v7_invalidate_l1 b secondary_startup ENDPROC(rockchip_secondary_startup) diff --git a/arch/arm/mach-rockchip/platsmp.c b/arch/arm/mach-rockchip/platsmp.c index 57b53b32e103..f26fcdca2445 100644 --- a/arch/arm/mach-rockchip/platsmp.c +++ b/arch/arm/mach-rockchip/platsmp.c @@ -22,6 +22,8 @@ #include <linux/regmap.h> #include <linux/mfd/syscon.h> +#include <linux/reset.h> +#include <linux/cpu.h> #include <asm/cacheflush.h> #include <asm/cp15.h> #include <asm/smp_scu.h> @@ -53,11 +55,47 @@ static int pmu_power_domain_is_on(int pd) return !(val & BIT(pd)); } +struct reset_control *rockchip_get_core_reset(int cpu) +{ + struct device *dev = get_cpu_device(cpu); + struct device_node *np; + + /* The cpu device is only available after the initial core bringup */ + if (dev) + np = dev->of_node; + else + np = of_get_cpu_node(cpu, 0); + + return of_reset_control_get(np, NULL); +} + static int pmu_set_power_domain(int pd, bool on) { u32 val = (on) ? 0 : BIT(pd); int ret; + /* + * We need to soft reset the cpu when we turn off the cpu power domain, + * or else the active processors might be stalled when the individual + * processor is powered down. + */ + if (read_cpuid_part() != ARM_CPU_PART_CORTEX_A9) { + struct reset_control *rstc = rockchip_get_core_reset(pd); + + if (IS_ERR(rstc)) { + pr_err("%s: could not get reset control for core %d\n", + __func__, pd); + return PTR_ERR(rstc); + } + + if (on) + reset_control_deassert(rstc); + else + reset_control_assert(rstc); + + reset_control_put(rstc); + } + ret = regmap_update_bits(pmu, PMU_PWRDN_CON, BIT(pd), val); if (ret < 0) { pr_err("%s: could not update power domain\n", __func__); @@ -84,6 +122,8 @@ static int pmu_set_power_domain(int pd, bool on) static int __cpuinit rockchip_boot_secondary(unsigned int cpu, struct task_struct *idle) { + int ret; + if (!sram_base_addr || !pmu) { pr_err("%s: sram or pmu missing for cpu boot\n", __func__); return -ENXIO; @@ -96,7 +136,26 @@ static int __cpuinit rockchip_boot_secondary(unsigned int cpu, } /* start the core */ - return pmu_set_power_domain(0 + cpu, true); + ret = pmu_set_power_domain(0 + cpu, true); + if (ret < 0) + return ret; + + if (read_cpuid_part() != ARM_CPU_PART_CORTEX_A9) { + /* We communicate with the bootrom to active the cpus other + * than cpu0, after a blob of initialize code, they will + * stay at wfe state, once they are actived, they will check + * the mailbox: + * sram_base_addr + 4: 0xdeadbeaf + * sram_base_addr + 8: start address for pc + * */ + udelay(10); + writel(virt_to_phys(rockchip_secondary_startup), + sram_base_addr + 8); + writel(0xDEADBEAF, sram_base_addr + 4); + dsb_sev(); + } + + return 0; } /** @@ -129,8 +188,6 @@ static int __init rockchip_smp_prepare_sram(struct device_node *node) return -EINVAL; } - sram_base_addr = of_iomap(node, 0); - /* set the boot function for the sram code */ rockchip_boot_fn = virt_to_phys(rockchip_secondary_startup); @@ -204,40 +261,55 @@ static void __init rockchip_smp_prepare_cpus(unsigned int max_cpus) struct device_node *node; unsigned int i; - node = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu"); - if (!node) { - pr_err("%s: missing scu\n", __func__); - return; - } - - scu_base_addr = of_iomap(node, 0); - if (!scu_base_addr) { - pr_err("%s: could not map scu registers\n", __func__); - return; - } - node = of_find_compatible_node(NULL, NULL, "rockchip,rk3066-smp-sram"); if (!node) { pr_err("%s: could not find sram dt node\n", __func__); return; } - if (rockchip_smp_prepare_sram(node)) + sram_base_addr = of_iomap(node, 0); + if (!sram_base_addr) { + pr_err("%s: could not map sram registers\n", __func__); return; + } if (rockchip_smp_prepare_pmu()) return; - /* enable the SCU power domain */ - pmu_set_power_domain(PMU_PWRDN_SCU, true); + if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) { + if (rockchip_smp_prepare_sram(node)) + return; - /* - * While the number of cpus is gathered from dt, also get the number - * of cores from the scu to verify this value when booting the cores. - */ - ncores = scu_get_core_count(scu_base_addr); + /* enable the SCU power domain */ + pmu_set_power_domain(PMU_PWRDN_SCU, true); + + node = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu"); + if (!node) { + pr_err("%s: missing scu\n", __func__); + return; + } - scu_enable(scu_base_addr); + scu_base_addr = of_iomap(node, 0); + if (!scu_base_addr) { + pr_err("%s: could not map scu registers\n", __func__); + return; + } + + /* + * While the number of cpus is gathered from dt, also get the + * number of cores from the scu to verify this value when + * booting the cores. + */ + ncores = scu_get_core_count(scu_base_addr); + pr_err("%s: ncores %d\n", __func__, ncores); + + scu_enable(scu_base_addr); + } else { + unsigned int l2ctlr; + + asm ("mrc p15, 1, %0, c9, c0, 2\n" : "=r" (l2ctlr)); + ncores = ((l2ctlr >> 24) & 0x3) + 1; + } /* Make sure that all cores except the first are really off */ for (i = 1; i < ncores; i++) |