diff options
Diffstat (limited to 'arch')
171 files changed, 291 insertions, 291 deletions
diff --git a/arch/alpha/kernel/err_marvel.c b/arch/alpha/kernel/err_marvel.c index f2956ac8dccc..497877bf2012 100644 --- a/arch/alpha/kernel/err_marvel.c +++ b/arch/alpha/kernel/err_marvel.c @@ -1082,7 +1082,7 @@ marvel_machine_check(u64 vector, u64 la_ptr) } /* - * A system event or error has occured, handle it here. + * A system event or error has occurred, handle it here. * * Any errors in the logout frame have already been cleared by the * PALcode, so just parse it. diff --git a/arch/alpha/kernel/err_titan.c b/arch/alpha/kernel/err_titan.c index 543d96d7fa2b..6f3867877d9e 100644 --- a/arch/alpha/kernel/err_titan.c +++ b/arch/alpha/kernel/err_titan.c @@ -591,7 +591,7 @@ privateer_process_680_frame(struct el_common *mchk_header, int print) (struct el_PRIVATEER_envdata_mcheck *) ((unsigned long)mchk_header + mchk_header->sys_offset); - /* TODO - catagorize errors, for now, no error */ + /* TODO - categorize errors, for now, no error */ if (!print) return status; diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c index ce857158c1ea..6413c5f23226 100644 --- a/arch/alpha/kernel/osf_sys.c +++ b/arch/alpha/kernel/osf_sys.c @@ -715,7 +715,7 @@ osf_setsysinfo(unsigned long op, void __user *buffer, unsigned long nbytes, /* * Alpha Architecture Handbook 4.7.7.3: * To be fully IEEE compiant, we must track the current IEEE - * exception state in software, because spurrious bits can be + * exception state in software, because spurious bits can be * set in the trap shadow of a software-complete insn. */ diff --git a/arch/alpha/kernel/smp.c b/arch/alpha/kernel/smp.c index ad176441be55..f4ab233201b2 100644 --- a/arch/alpha/kernel/smp.c +++ b/arch/alpha/kernel/smp.c @@ -439,7 +439,6 @@ setup_smp(void) ((char *)cpubase + i*hwrpb->processor_size); if ((cpu->flags & 0x1cc) == 0x1cc) { smp_num_probed++; - /* Assume here that "whami" == index */ cpu_set(i, cpu_present_map); cpu->pal_revision = boot_cpu_palrev; } diff --git a/arch/alpha/kernel/sys_alcor.c b/arch/alpha/kernel/sys_alcor.c index 49bedfbbd31b..d187d01d2a17 100644 --- a/arch/alpha/kernel/sys_alcor.c +++ b/arch/alpha/kernel/sys_alcor.c @@ -138,7 +138,7 @@ alcor_init_irq(void) for (i = 16; i < 48; ++i) { /* On Alcor, at least, lines 20..30 are not connected - and can generate spurrious interrupts if we turn them + and can generate spurious interrupts if we turn them on while IRQ probing. */ if (i >= 16+20 && i <= 16+30) continue; diff --git a/arch/alpha/kernel/sys_sio.c b/arch/alpha/kernel/sys_sio.c index 14b5a753aba5..ee7b9009ebb4 100644 --- a/arch/alpha/kernel/sys_sio.c +++ b/arch/alpha/kernel/sys_sio.c @@ -78,7 +78,7 @@ alphabook1_init_arch(void) * example, sound boards seem to like using IRQ 9. * * This is NOT how we should do it. PIRQ0-X should have - * their own IRQ's, the way intel uses the IO-APIC irq's. + * their own IRQs, the way intel uses the IO-APIC IRQs. */ static void __init diff --git a/arch/alpha/lib/checksum.c b/arch/alpha/lib/checksum.c index 8698e0746f9f..199f6efa83fa 100644 --- a/arch/alpha/lib/checksum.c +++ b/arch/alpha/lib/checksum.c @@ -5,7 +5,7 @@ * in an architecture-specific manner due to speed.. * Comments in other versions indicate that the algorithms are from RFC1071 * - * accellerated versions (and 21264 assembly versions ) contributed by + * accelerated versions (and 21264 assembly versions ) contributed by * Rick Gorton <rick.gorton@alpha-processor.com> */ diff --git a/arch/alpha/lib/csum_partial_copy.c b/arch/alpha/lib/csum_partial_copy.c index 4ca75c74ce90..40736da9bea8 100644 --- a/arch/alpha/lib/csum_partial_copy.c +++ b/arch/alpha/lib/csum_partial_copy.c @@ -2,7 +2,7 @@ * csum_partial_copy - do IP checksumming and copy * * (C) Copyright 1996 Linus Torvalds - * accellerated versions (and 21264 assembly versions ) contributed by + * accelerated versions (and 21264 assembly versions ) contributed by * Rick Gorton <rick.gorton@alpha-processor.com> * * Don't look at this too closely - you'll go mad. The things diff --git a/arch/alpha/mm/init.c b/arch/alpha/mm/init.c index 5e6da47779a4..40c15e7301de 100644 --- a/arch/alpha/mm/init.c +++ b/arch/alpha/mm/init.c @@ -235,7 +235,7 @@ callback_init(void * kernel_end) unsigned long pfn = crb->map[i].pa >> PAGE_SHIFT; crb->map[i].va = vaddr; for (j = 0; j < crb->map[i].count; ++j) { - /* Newer console's (especially on larger + /* Newer consoles (especially on larger systems) may require more pages of PTEs. Grab additional pages as needed. */ if (pmd != pmd_offset(pgd, vaddr)) { diff --git a/arch/alpha/oprofile/op_impl.h b/arch/alpha/oprofile/op_impl.h index 6b97893c1a80..b2b87ae9a353 100644 --- a/arch/alpha/oprofile/op_impl.h +++ b/arch/alpha/oprofile/op_impl.h @@ -38,7 +38,7 @@ struct op_register_config { unsigned long need_reset; }; -/* Per-architecture configury and hooks. */ +/* Per-architecture configuration and hooks. */ struct op_axp_model { void (*reg_setup) (struct op_register_config *, struct op_counter_config *, diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 4cee938df01e..a0cdaafa115b 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -851,7 +851,7 @@ config KEXEC help kexec is a system call that implements the ability to shutdown your current kernel, and to start another kernel. It is like a reboot - but it is indepedent of the system firmware. And like a reboot + but it is independent of the system firmware. And like a reboot you can start any kernel with it, not just Linux. It is an ongoing process to be certain the hardware in a machine diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c index ba4a1bb3ee40..aa2d365c93fb 100644 --- a/arch/arm/mach-at91/gpio.c +++ b/arch/arm/mach-at91/gpio.c @@ -439,7 +439,7 @@ void __init at91_gpio_irq_setup(void) for (i = 0; i < 32; i++, pin++) { /* * Can use the "simple" and not "edge" handler since it's - * shorter, and the AIC handles interupts sanely. + * shorter, and the AIC handles interrupts sanely. */ set_irq_chip(pin, &gpio_irqchip); set_irq_handler(pin, handle_simple_irq); diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c index 0733078940fa..1da9d59a0347 100644 --- a/arch/arm/mach-omap1/irq.c +++ b/arch/arm/mach-omap1/irq.c @@ -5,7 +5,7 @@ * * Copyright (C) 2004 Nokia Corporation * Written by Tony Lindgren <tony@atomide.com> - * Major cleanups by Juha Yrjölä <juha.yrjola@nokia.com> + * Major cleanups by Juha Yrjölä <juha.yrjola@nokia.com> * * Completely re-written to support various OMAP chips with bank specific * interrupt handlers. diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c index 62e801ef9ad9..8d322c20ccae 100644 --- a/arch/arm/mach-omap2/timer-gp.c +++ b/arch/arm/mach-omap2/timer-gp.c @@ -5,7 +5,7 @@ * * Copyright (C) 2005 Nokia Corporation * Author: Paul Mundt <paul.mundt@nokia.com> - * Juha Yrjölä <juha.yrjola@nokia.com> + * Juha Yrjölä <juha.yrjola@nokia.com> * OMAP Dual-mode timer framework support by Timo Teras * * Some parts based off of TI's 24xx code: diff --git a/arch/arm/mach-s3c2410/clock.c b/arch/arm/mach-s3c2410/clock.c index cab9d6265e9e..2bfaa6102025 100644 --- a/arch/arm/mach-s3c2410/clock.c +++ b/arch/arm/mach-s3c2410/clock.c @@ -238,7 +238,7 @@ int __init s3c2410_baseclk_add(void) } /* We must be careful disabling the clocks we are not intending to - * be using at boot time, as subsytems such as the LCD which do + * be using at boot time, as subsystems such as the LCD which do * their own DMA requests to the bus can cause the system to lockup * if they where in the middle of requesting bus access. * diff --git a/arch/arm/mach-s3c2412/clock.c b/arch/arm/mach-s3c2412/clock.c index 8543dd6df391..458993601897 100644 --- a/arch/arm/mach-s3c2412/clock.c +++ b/arch/arm/mach-s3c2412/clock.c @@ -689,7 +689,7 @@ int __init s3c2412_baseclk_add(void) } /* We must be careful disabling the clocks we are not intending to - * be using at boot time, as subsytems such as the LCD which do + * be using at boot time, as subsystems such as the LCD which do * their own DMA requests to the bus can cause the system to lockup * if they where in the middle of requesting bus access. * diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c index 58402948c47c..b42f956738d0 100644 --- a/arch/arm/mach-s3c2443/clock.c +++ b/arch/arm/mach-s3c2443/clock.c @@ -1005,7 +1005,7 @@ void __init s3c2443_init_clocks(int xtal) } /* We must be careful disabling the clocks we are not intending to - * be using at boot time, as subsytems such as the LCD which do + * be using at boot time, as subsystems such as the LCD which do * their own DMA requests to the bus can cause the system to lockup * if they where in the middle of requesting bus access. * diff --git a/arch/arm/nwfpe/fpopcode.h b/arch/arm/nwfpe/fpopcode.h index 0090b19bbe61..786e4c96156d 100644 --- a/arch/arm/nwfpe/fpopcode.h +++ b/arch/arm/nwfpe/fpopcode.h @@ -78,11 +78,11 @@ TABLE 1 +-------------------------+---+---+---------+---------+ | Precision | u | v | FPSR.EP | length | +-------------------------+---+---+---------+---------+ -| Single | 0 ü 0 | x | 1 words | -| Double | 1 ü 1 | x | 2 words | -| Extended | 1 ü 1 | x | 3 words | -| Packed decimal | 1 ü 1 | 0 | 3 words | -| Expanded packed decimal | 1 ü 1 | 1 | 4 words | +| Single | 0 | 0 | x | 1 words | +| Double | 1 | 1 | x | 2 words | +| Extended | 1 | 1 | x | 3 words | +| Packed decimal | 1 | 1 | 0 | 3 words | +| Expanded packed decimal | 1 | 1 | 1 | 4 words | +-------------------------+---+---+---------+---------+ Note: x = don't care */ @@ -92,10 +92,10 @@ TABLE 2 +---+---+---------------------------------+ | w | x | Number of registers to transfer | +---+---+---------------------------------+ -| 0 ü 1 | 1 | -| 1 ü 0 | 2 | -| 1 ü 1 | 3 | -| 0 ü 0 | 4 | +| 0 | 1 | 1 | +| 1 | 0 | 2 | +| 1 | 1 | 3 | +| 0 | 0 | 4 | +---+---+---------------------------------+ */ @@ -156,10 +156,10 @@ TABLE 5 +-------------------------+---+---+ | Rounding Precision | e | f | +-------------------------+---+---+ -| IEEE Single precision | 0 ü 0 | -| IEEE Double precision | 0 ü 1 | -| IEEE Extended precision | 1 ü 0 | -| undefined (trap) | 1 ü 1 | +| IEEE Single precision | 0 | 0 | +| IEEE Double precision | 0 | 1 | +| IEEE Extended precision | 1 | 0 | +| undefined (trap) | 1 | 1 | +-------------------------+---+---+ */ @@ -168,10 +168,10 @@ TABLE 5 +---------------------------------+---+---+ | Rounding Mode | g | h | +---------------------------------+---+---+ -| Round to nearest (default) | 0 ü 0 | -| Round toward plus infinity | 0 ü 1 | -| Round toward negative infinity | 1 ü 0 | -| Round toward zero | 1 ü 1 | +| Round to nearest (default) | 0 | 0 | +| Round toward plus infinity | 0 | 1 | +| Round toward negative infinity | 1 | 0 | +| Round toward zero | 1 | 1 | +---------------------------------+---+---+ */ diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 05a38498cbe0..dcbba07cf98a 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -2,7 +2,7 @@ * linux/arch/arm/plat-omap/dma.c * * Copyright (C) 2003 Nokia Corporation - * Author: Juha Yrjölä <juha.yrjola@nokia.com> + * Author: Juha Yrjölä <juha.yrjola@nokia.com> * DMA channel linking for 1610 by Samuel Ortiz <samuel.ortiz@nokia.com> * Graphics DMA and LCD DMA graphics tranformations * by Imre Deak <imre.deak@nokia.com> diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 337455dfe64d..6097753394ad 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -4,7 +4,7 @@ * Support functions for OMAP GPIO * * Copyright (C) 2003-2005 Nokia Corporation - * Written by Juha Yrjölä <juha.yrjola@nokia.com> + * Written by Juha Yrjölä <juha.yrjola@nokia.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig index d12346aaa88b..bbecbd8469b5 100644 --- a/arch/avr32/Kconfig +++ b/arch/avr32/Kconfig @@ -189,7 +189,7 @@ config CMDLINE endmenu -menu "Power managment options" +menu "Power management options" menu "CPU Frequency scaling" diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index 4c5ca9d5e40f..ad28dc76fc97 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -613,85 +613,86 @@ config I_ENTRY_L1 bool "Locate interrupt entry code in L1 Memory" default y help - If enabled interrupt entry code (STORE/RESTORE CONTEXT) is linked - into L1 instruction memory.(less latency) + If enabled, interrupt entry code (STORE/RESTORE CONTEXT) is linked + into L1 instruction memory. (less latency) config EXCPT_IRQ_SYSC_L1 - bool "Locate entire ASM lowlevel excepetion / interrupt - Syscall and CPLB handler code in L1 Memory" + bool "Locate entire ASM lowlevel exception / interrupt - Syscall and CPLB handler code in L1 Memory" default y help - If enabled entire ASM lowlevel exception and interrupt entry code (STORE/RESTORE CONTEXT) is linked - into L1 instruction memory.(less latency) + If enabled, the entire ASM lowlevel exception and interrupt entry code + (STORE/RESTORE CONTEXT) is linked into L1 instruction memory. + (less latency) config DO_IRQ_L1 bool "Locate frequently called do_irq dispatcher function in L1 Memory" default y help - If enabled frequently called do_irq dispatcher function is linked - into L1 instruction memory.(less latency) + If enabled, the frequently called do_irq dispatcher function is linked + into L1 instruction memory. (less latency) config CORE_TIMER_IRQ_L1 bool "Locate frequently called timer_interrupt() function in L1 Memory" default y help - If enabled frequently called timer_interrupt() function is linked - into L1 instruction memory.(less latency) + If enabled, the frequently called timer_interrupt() function is linked + into L1 instruction memory. (less latency) config IDLE_L1 bool "Locate frequently idle function in L1 Memory" default y help - If enabled frequently called idle function is linked - into L1 instruction memory.(less latency) + If enabled, the frequently called idle function is linked + into L1 instruction memory. (less latency) config SCHEDULE_L1 bool "Locate kernel schedule function in L1 Memory" default y help - If enabled frequently called kernel schedule is linked - into L1 instruction memory.(less latency) + If enabled, the frequently called kernel schedule is linked + into L1 instruction memory. (less latency) config ARITHMETIC_OPS_L1 bool "Locate kernel owned arithmetic functions in L1 Memory" default y help - If enabled arithmetic functions are linked - into L1 instruction memory.(less latency) + If enabled, arithmetic functions are linked + into L1 instruction memory. (less latency) config ACCESS_OK_L1 bool "Locate access_ok function in L1 Memory" default y help - If enabled access_ok function is linked - into L1 instruction memory.(less latency) + If enabled, the access_ok function is linked + into L1 instruction memory. (less latency) config MEMSET_L1 bool "Locate memset function in L1 Memory" default y help - If enabled memset function is linked - into L1 instruction memory.(less latency) + If enabled, the memset function is linked + into L1 instruction memory. (less latency) config MEMCPY_L1 bool "Locate memcpy function in L1 Memory" default y help - If enabled memcpy function is linked - into L1 instruction memory.(less latency) + If enabled, the memcpy function is linked + into L1 instruction memory. (less latency) config SYS_BFIN_SPINLOCK_L1 bool "Locate sys_bfin_spinlock function in L1 Memory" default y help - If enabled sys_bfin_spinlock function is linked - into L1 instruction memory.(less latency) + If enabled, sys_bfin_spinlock function is linked + into L1 instruction memory. (less latency) config IP_CHECKSUM_L1 bool "Locate IP Checksum function in L1 Memory" default n help - If enabled IP Checksum function is linked - into L1 instruction memory.(less latency) + If enabled, the IP Checksum function is linked + into L1 instruction memory. (less latency) config CACHELINE_ALIGNED_L1 bool "Locate cacheline_aligned data to L1 Data Memory" @@ -699,24 +700,24 @@ config CACHELINE_ALIGNED_L1 default n if BF54x depends on !BF531 help - If enabled cacheline_anligned data is linked - into L1 data memory.(less latency) + If enabled, cacheline_anligned data is linked + into L1 data memory. (less latency) config SYSCALL_TAB_L1 bool "Locate Syscall Table L1 Data Memory" default n depends on !BF531 help - If enabled the Syscall LUT is linked - into L1 data memory.(less latency) + If enabled, the Syscall LUT is linked + into L1 data memory. (less latency) config CPLB_SWITCH_TAB_L1 bool "Locate CPLB Switch Tables L1 Data Memory" default n depends on !BF531 help - If enabled the CPLB Switch Tables are linked - into L1 data memory.(less latency) + If enabled, the CPLB Switch Tables are linked + into L1 data memory. (less latency) endmenu @@ -1029,13 +1030,13 @@ config DEBUG_HWERR from. config DEBUG_ICACHE_CHECK - bool "Check Instruction cache coherancy" + bool "Check Instruction cache coherency" depends on DEBUG_KERNEL depends on DEBUG_HWERR help - Say Y here if you are getting wierd unexplained errors. This will - ensure that icache is what SDRAM says it should be, by doing a - byte wise comparision between SDRAM and instruction cache. This + Say Y here if you are getting weird unexplained errors. This will + ensure that icache is what SDRAM says it should be by doing a + byte wise comparison between SDRAM and instruction cache. This also relocates the irq_panic() function to L1 memory, (which is un-cached). diff --git a/arch/cris/arch-v10/Kconfig b/arch/cris/arch-v10/Kconfig index c7ea9efd0104..f1ce6f64401d 100644 --- a/arch/cris/arch-v10/Kconfig +++ b/arch/cris/arch-v10/Kconfig @@ -182,7 +182,7 @@ config ETRAX_LED7G set this to same as CONFIG_ETRAX_LED1G (normally 2). config ETRAX_LED8Y - int "Eigth yellow LED bit" + int "Eighth yellow LED bit" depends on ETRAX_CSP0_LEDS default "2" help diff --git a/arch/cris/arch-v10/boot/compressed/misc.c b/arch/cris/arch-v10/boot/compressed/misc.c index ffb8d21b2f83..e205d2e7e089 100644 --- a/arch/cris/arch-v10/boot/compressed/misc.c +++ b/arch/cris/arch-v10/boot/compressed/misc.c @@ -8,7 +8,7 @@ * * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994 * puts by Nick Holloway 1993, better puts by Martin Mares 1995 - * adoptation for Linux/CRIS Axis Communications AB, 1999 + * adaptation for Linux/CRIS Axis Communications AB, 1999 * */ diff --git a/arch/cris/arch-v10/drivers/pcf8563.c b/arch/cris/arch-v10/drivers/pcf8563.c index 1de0026bb94e..c263b8232dbc 100644 --- a/arch/cris/arch-v10/drivers/pcf8563.c +++ b/arch/cris/arch-v10/drivers/pcf8563.c @@ -4,7 +4,7 @@ * From Phillips' datasheet: * * The PCF8563 is a CMOS real-time clock/calendar optimized for low power - * consumption. A programmable clock output, interupt output and voltage + * consumption. A programmable clock output, interrupt output and voltage * low detector are also provided. All address and data are transferred * serially via two-line bidirectional I2C-bus. Maximum bus speed is * 400 kbits/s. The built-in word address register is incremented diff --git a/arch/cris/arch-v10/kernel/debugport.c b/arch/cris/arch-v10/kernel/debugport.c index 2b536ca6f444..93679a48c791 100644 --- a/arch/cris/arch-v10/kernel/debugport.c +++ b/arch/cris/arch-v10/kernel/debugport.c @@ -83,7 +83,7 @@ * * Revision 1.4 2002/11/19 14:35:24 starvik * Changes from linux 2.4 - * Changed struct initializer syntax to the currently prefered notation + * Changed struct initializer syntax to the currently preferred notation * * Revision 1.3 2002/11/06 09:47:03 starvik * Modified for new interrupt macros diff --git a/arch/cris/arch-v10/kernel/entry.S b/arch/cris/arch-v10/kernel/entry.S index ae45d4522e65..c5844cb70f09 100644 --- a/arch/cris/arch-v10/kernel/entry.S +++ b/arch/cris/arch-v10/kernel/entry.S @@ -97,7 +97,7 @@ * * Revision 1.36 2001/11/22 13:36:36 bjornw * * In ret_from_intr, check regs->dccr for usermode reentrance instead of - * DCCR explicitely (because the latter might not reflect current reality) + * DCCR explicitly (because the latter might not reflect current reality) * * In mmu_bus_fault, set $r9 _after_ calling the C-code instead of before * since $r9 is call-clobbered and is potentially needed afterwards * diff --git a/arch/cris/arch-v10/kernel/fasttimer.c b/arch/cris/arch-v10/kernel/fasttimer.c index 8cbdf594b369..d3ea052e5ee1 100644 --- a/arch/cris/arch-v10/kernel/fasttimer.c +++ b/arch/cris/arch-v10/kernel/fasttimer.c @@ -84,7 +84,7 @@ * with time based on jiffies and *R_TIMER0_DATA, uses a table * for fast conversion of timer value to microseconds. * (Much faster the standard do_gettimeofday() and we don't really - * wan't to use the true time - we wan't the "uptime" so timers don't screw up + * want to use the true time - we want the "uptime" so timers don't screw up * when we change the time. * TODO: Add efficient support for continuous timers as well. * diff --git a/arch/cris/arch-v10/kernel/irq.c b/arch/cris/arch-v10/kernel/irq.c index 96094cbf1255..845c95f6e871 100644 --- a/arch/cris/arch-v10/kernel/irq.c +++ b/arch/cris/arch-v10/kernel/irq.c @@ -169,7 +169,7 @@ init_IRQ(void) for (i = 0; i < 256; i++) etrax_irv->v[i] = weird_irq; - /* Initialize IRQ handler descriptiors. */ + /* Initialize IRQ handler descriptors. */ for(i = 2; i < NR_IRQS; i++) { irq_desc[i].chip = &crisv10_irq_type; set_int_vector(i, interrupt[i]); diff --git a/arch/cris/arch-v10/kernel/kgdb.c b/arch/cris/arch-v10/kernel/kgdb.c index 07628a13c6c4..77f4b1423725 100644 --- a/arch/cris/arch-v10/kernel/kgdb.c +++ b/arch/cris/arch-v10/kernel/kgdb.c @@ -959,7 +959,7 @@ stub_is_stopped(int sigval) /* Send register contents. We probably only need to send the * PC, frame pointer and stack pointer here. Other registers will be - * explicitely asked for. But for now, send all. + * explicitly asked for. But for now, send all. */ for (regno = R0; regno <= USP; regno++) { diff --git a/arch/cris/arch-v10/kernel/process.c b/arch/cris/arch-v10/kernel/process.c index b6831ceb6a62..1a3760c94f85 100644 --- a/arch/cris/arch-v10/kernel/process.c +++ b/arch/cris/arch-v10/kernel/process.c @@ -64,7 +64,7 @@ void hard_reset_now (void) #if defined(CONFIG_ETRAX_WATCHDOG) && !defined(CONFIG_SVINTO_SIM) cause_of_death = 0xbedead; #else - /* Since we dont plan to keep on reseting the watchdog, + /* Since we dont plan to keep on resetting the watchdog, the key can be arbitrary hence three */ *R_WATCHDOG = IO_FIELD(R_WATCHDOG, key, 3) | IO_STATE(R_WATCHDOG, enable, start); diff --git a/arch/cris/arch-v10/kernel/shadows.c b/arch/cris/arch-v10/kernel/shadows.c index 38fd44dfbc5b..326178aef6ee 100644 --- a/arch/cris/arch-v10/kernel/shadows.c +++ b/arch/cris/arch-v10/kernel/shadows.c @@ -20,7 +20,7 @@ unsigned long r_timer_ctrl_shadow; * These are only usable if there actually IS a latch connected * to the corresponding external chip-select pin. * - * A common usage is that CSP0 controls LED's and CSP4 video chips. + * A common usage is that CSP0 controls LEDs and CSP4 video chips. */ unsigned long port_cse1_shadow; diff --git a/arch/cris/arch-v10/lib/dram_init.S b/arch/cris/arch-v10/lib/dram_init.S index 9cf83932cd5d..6a6bdfd6984d 100644 --- a/arch/cris/arch-v10/lib/dram_init.S +++ b/arch/cris/arch-v10/lib/dram_init.S @@ -40,7 +40,7 @@ * Copy warning from head.S about r8 and r9 * * Revision 1.7 2001/04/18 12:05:39 bjornw - * Fixed comments, and explicitely include config.h to be sure its there + * Fixed comments, and explicitly include config.h to be sure its there * * Revision 1.6 2001/04/10 06:20:16 starvik * Delay should be 200us, not 200ns @@ -66,7 +66,7 @@ */ /* Just to be certain the config file is included, we include it here - * explicitely instead of depending on it being included in the file that + * explicitly instead of depending on it being included in the file that * uses this code. */ diff --git a/arch/cris/arch-v10/lib/string.c b/arch/cris/arch-v10/lib/string.c index 8ffde4901b57..15d6662b03b1 100644 --- a/arch/cris/arch-v10/lib/string.c +++ b/arch/cris/arch-v10/lib/string.c @@ -41,7 +41,7 @@ void *memcpy(void *pdst, Make sure the compiler is able to make something useful of this. As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop). - If gcc was allright, it really would need no temporaries, and no + If gcc was alright, it really would need no temporaries, and no stack space to save stuff on. */ register void *return_dst __asm__ ("r10") = pdst; diff --git a/arch/cris/arch-v10/lib/usercopy.c b/arch/cris/arch-v10/lib/usercopy.c index 43778d53c254..a12c708afc9a 100644 --- a/arch/cris/arch-v10/lib/usercopy.c +++ b/arch/cris/arch-v10/lib/usercopy.c @@ -38,7 +38,7 @@ __copy_user (void __user *pdst, const void *psrc, unsigned long pn) As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop). FIXME: Comment for old gcc version. Check. - If gcc was allright, it really would need no temporaries, and no + If gcc was alright, it really would need no temporaries, and no stack space to save stuff on. */ register char *dst __asm__ ("r13") = pdst; @@ -200,7 +200,7 @@ __copy_user_zeroing (void __user *pdst, const void *psrc, unsigned long pn) As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop). FIXME: Comment for old gcc version. Check. - If gcc was allright, it really would need no temporaries, and no + If gcc was alright, it really would need no temporaries, and no stack space to save stuff on. */ register char *dst __asm__ ("r13") = pdst; @@ -380,7 +380,7 @@ __do_clear_user (void __user *pto, unsigned long pn) As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop). FIXME: Comment for old gcc version. Check. - If gcc was allright, it really would need no temporaries, and no + If gcc was alright, it really would need no temporaries, and no stack space to save stuff on. */ register char *dst __asm__ ("r13") = pto; diff --git a/arch/cris/arch-v32/boot/compressed/misc.c b/arch/cris/arch-v32/boot/compressed/misc.c index 11902697196d..0169ba1ca9c9 100644 --- a/arch/cris/arch-v32/boot/compressed/misc.c +++ b/arch/cris/arch-v32/boot/compressed/misc.c @@ -8,7 +8,7 @@ * * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994 * puts by Nick Holloway 1993, better puts by Martin Mares 1995 - * adoptation for Linux/CRIS Axis Communications AB, 1999 + * adaptation for Linux/CRIS Axis Communications AB, 1999 * */ @@ -151,7 +151,7 @@ serout(const char *s, reg_scope_instances regi_ser) do { rs = REG_RD(ser, regi_ser, rs_stat_din); } - while (!rs.tr_rdy);/* Wait for tranceiver. */ + while (!rs.tr_rdy);/* Wait for transceiver. */ REG_WR(ser, regi_ser, rw_dout, dout); } @@ -264,7 +264,7 @@ serial_setup(reg_scope_instances regi_ser) tr_ctrl.stop_bits = 1; /* 2 stop bits. */ /* - * The baudrate setup is a bit fishy, but in the end the tranceiver is + * The baudrate setup is a bit fishy, but in the end the transceiver is * set to 4800 and the receiver to 115200. The magic value is * 29.493 MHz. */ diff --git a/arch/cris/arch-v32/drivers/axisflashmap.c b/arch/cris/arch-v32/drivers/axisflashmap.c index 5180d45412fc..3ec12ea44e8e 100644 --- a/arch/cris/arch-v32/drivers/axisflashmap.c +++ b/arch/cris/arch-v32/drivers/axisflashmap.c @@ -205,7 +205,7 @@ static struct mtd_info *probe_cs(struct map_info *map_cs) /* * Probe each chip select individually for flash chips. If there are chips on * both cse0 and cse1, the mtd_info structs will be concatenated to one struct - * so that MTD partitions can cross chip boundries. + * so that MTD partitions can cross chip boundaries. * * The only known restriction to how you can mount your chips is that each * chip select must hold similar flash chips. But you need external hardware diff --git a/arch/cris/arch-v32/drivers/i2c.c b/arch/cris/arch-v32/drivers/i2c.c index e12f6cc6f4a2..f1edd2e359b2 100644 --- a/arch/cris/arch-v32/drivers/i2c.c +++ b/arch/cris/arch-v32/drivers/i2c.c @@ -275,7 +275,7 @@ i2c_getack(void) ack = 0; i2c_delay(CLOCK_HIGH_TIME/2); if(!ack){ - if(!i2c_getbit()) /* receiver pulld SDA low */ + if(!i2c_getbit()) /* receiver pulled SDA low */ ack = 1; i2c_delay(CLOCK_HIGH_TIME/2); } diff --git a/arch/cris/arch-v32/drivers/nandflash.c b/arch/cris/arch-v32/drivers/nandflash.c index 93ddea4d9564..5ce015c6bb0d 100644 --- a/arch/cris/arch-v32/drivers/nandflash.c +++ b/arch/cris/arch-v32/drivers/nandflash.c @@ -138,7 +138,7 @@ struct mtd_info* __init crisv32_nand_flash_probe (void) /* Enable the following for a flash based bad block table */ this->options = NAND_USE_FLASH_BBT; - /* Scan to find existance of the device */ + /* Scan to find existence of the device */ if (nand_scan (crisv32_mtd, 1)) { err = -ENXIO; goto out_ior; diff --git a/arch/cris/arch-v32/drivers/pcf8563.c b/arch/cris/arch-v32/drivers/pcf8563.c index da479a14f836..6dbd700d3d66 100644 --- a/arch/cris/arch-v32/drivers/pcf8563.c +++ b/arch/cris/arch-v32/drivers/pcf8563.c @@ -4,7 +4,7 @@ * From Phillips' datasheet: * * The PCF8563 is a CMOS real-time clock/calendar optimized for low power - * consumption. A programmable clock output, interupt output and voltage + * consumption. A programmable clock output, interrupt output and voltage * low detector are also provided. All address and data are transferred * serially via two-line bidirectional I2C-bus. Maximum bus speed is * 400 kbits/s. The built-in word address register is incremented diff --git a/arch/cris/arch-v32/kernel/fasttimer.c b/arch/cris/arch-v32/kernel/fasttimer.c index 79e1e4c2ca1d..b40551f9f40d 100644 --- a/arch/cris/arch-v32/kernel/fasttimer.c +++ b/arch/cris/arch-v32/kernel/fasttimer.c @@ -97,7 +97,7 @@ * with time based on jiffies and *R_TIMER0_DATA, uses a table * for fast conversion of timer value to microseconds. * (Much faster the standard do_gettimeofday() and we don't really - * wan't to use the true time - we wan't the "uptime" so timers don't screw up + * want to use the true time - we want the "uptime" so timers don't screw up * when we change the time. * TODO: Add efficient support for continuous timers as well. * diff --git a/arch/cris/arch-v32/kernel/irq.c b/arch/cris/arch-v32/kernel/irq.c index cc361bf578ae..a9acaa270243 100644 --- a/arch/cris/arch-v32/kernel/irq.c +++ b/arch/cris/arch-v32/kernel/irq.c @@ -140,7 +140,7 @@ block_irq(int irq, int cpu) spin_lock_irqsave(&irq_lock, flags); intr_mask = REG_RD_INT(intr_vect, irq_regs[cpu], rw_mask); - /* Remember; 1 let thru, 0 block. */ + /* Remember; 1 let through, 0 block. */ intr_mask &= ~(1 << (irq - FIRST_IRQ)); REG_WR_INT(intr_vect, irq_regs[cpu], rw_mask, intr_mask); @@ -156,7 +156,7 @@ unblock_irq(int irq, int cpu) spin_lock_irqsave(&irq_lock, flags); intr_mask = REG_RD_INT(intr_vect, irq_regs[cpu], rw_mask); - /* Remember; 1 let thru, 0 block. */ + /* Remember; 1 let through, 0 block. */ intr_mask |= (1 << (irq - FIRST_IRQ)); REG_WR_INT(intr_vect, irq_regs[cpu], rw_mask, intr_mask); @@ -308,7 +308,7 @@ crisv32_do_multiple(struct pt_regs* regs) */ irq_enter(); - /* Get which IRQs that happend. */ + /* Get which IRQs that happened. */ masked = REG_RD_INT(intr_vect, irq_regs[cpu], r_masked_vect); /* Calculate new IRQ mask with these IRQs disabled. */ @@ -366,7 +366,7 @@ init_IRQ(void) for (i = 0; i < 256; i++) etrax_irv->v[i] = weird_irq; - /* Point all IRQ's to bad handlers. */ + /* Point all IRQs to bad handlers. */ for (i = FIRST_IRQ, j = 0; j < NR_IRQS; i++, j++) { irq_desc[j].chip = &crisv32_irq_type; set_exception_vector(i, interrupt[j]); diff --git a/arch/cris/arch-v32/kernel/process.c b/arch/cris/arch-v32/kernel/process.c index 6326351af252..b72a15580dc7 100644 --- a/arch/cris/arch-v32/kernel/process.c +++ b/arch/cris/arch-v32/kernel/process.c @@ -162,7 +162,7 @@ copy_thread(int nr, unsigned long clone_flags, unsigned long usp, /* Put the switch stack right below the pt_regs. */ swstack = ((struct switch_stack *) childregs) - 1; - /* Paramater to ret_from_sys_call. 0 is don't restart the syscall. */ + /* Parameter to ret_from_sys_call. 0 is don't restart the syscall. */ swstack->r9 = 0; /* diff --git a/arch/cris/arch-v32/kernel/signal.c b/arch/cris/arch-v32/kernel/signal.c index 7cd6ac803409..024cc6901974 100644 --- a/arch/cris/arch-v32/kernel/signal.c +++ b/arch/cris/arch-v32/kernel/signal.c @@ -347,7 +347,7 @@ get_sigframe(struct k_sigaction *ka, struct pt_regs * regs, size_t frame_size) /* Grab and setup a signal frame. * * Basically a lot of state-info is stacked, and arranged for the - * user-mode program to return to the kernel using either a trampiline + * user-mode program to return to the kernel using either a trampoline * which performs the syscall sigreturn(), or a provided user-mode * trampoline. */ @@ -641,7 +641,7 @@ ugdb_trap_user(struct thread_info *ti, int sig) user_regs(ti)->spc = 0; } /* FIXME: Filter out false h/w breakpoint hits (i.e. EDA - not withing any configured h/w breakpoint range). Synchronize with + not within any configured h/w breakpoint range). Synchronize with what already exists for kernel debugging. */ if (((user_regs(ti)->exs & 0xff00) >> 8) == BREAK_8_INTR_VECT) { /* Break 8: subtract 2 from ERP unless in a delay slot. */ diff --git a/arch/cris/arch-v32/kernel/smp.c b/arch/cris/arch-v32/kernel/smp.c index 697494bc2de1..171c96e0a5d3 100644 --- a/arch/cris/arch-v32/kernel/smp.c +++ b/arch/cris/arch-v32/kernel/smp.c @@ -142,7 +142,7 @@ smp_boot_one_cpu(int cpuid) return -1; } -/* Secondary CPUs starts uing C here. Here we need to setup CPU +/* Secondary CPUs starts using C here. Here we need to setup CPU * specific stuff such as the local timer and the MMU. */ void __init smp_callin(void) { diff --git a/arch/cris/arch-v32/kernel/time.c b/arch/cris/arch-v32/kernel/time.c index be0a01657d4f..2f7e8e200f2c 100644 --- a/arch/cris/arch-v32/kernel/time.c +++ b/arch/cris/arch-v32/kernel/time.c @@ -99,7 +99,7 @@ unsigned long do_slow_gettimeoffset(void) /* From timer MDS describing the hardware watchdog: * 4.3.1 Watchdog Operation * The watchdog timer is an 8-bit timer with a configurable start value. - * Once started the whatchdog counts downwards with a frequency of 763 Hz + * Once started the watchdog counts downwards with a frequency of 763 Hz * (100/131072 MHz). When the watchdog counts down to 1, it generates an * NMI (Non Maskable Interrupt), and when it counts down to 0, it resets the * chip. diff --git a/arch/cris/arch-v32/kernel/traps.c b/arch/cris/arch-v32/kernel/traps.c index 2462b1ef1fbb..17fd3dbd1c80 100644 --- a/arch/cris/arch-v32/kernel/traps.c +++ b/arch/cris/arch-v32/kernel/traps.c @@ -105,7 +105,7 @@ bad_value: /* * This gets called from entry.S when the watchdog has bitten. Show something - * similiar to an Oops dump, and if the kernel if configured to be a nice doggy; + * similar to an Oops dump, and if the kernel is configured to be a nice doggy; * halt instead of reboot. */ void diff --git a/arch/cris/arch-v32/lib/dram_init.S b/arch/cris/arch-v32/lib/dram_init.S index 158b3dbb4d9d..218fbe259ee5 100644 --- a/arch/cris/arch-v32/lib/dram_init.S +++ b/arch/cris/arch-v32/lib/dram_init.S @@ -12,7 +12,7 @@ */ /* Just to be certain the config file is included, we include it here - * explicitely instead of depending on it being included in the file that + * explicitly instead of depending on it being included in the file that * uses this code. */ diff --git a/arch/cris/arch-v32/lib/string.c b/arch/cris/arch-v32/lib/string.c index 98e282ac824a..6740b2cebae5 100644 --- a/arch/cris/arch-v32/lib/string.c +++ b/arch/cris/arch-v32/lib/string.c @@ -41,7 +41,7 @@ void *memcpy(void *pdst, Make sure the compiler is able to make something useful of this. As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop). - If gcc was allright, it really would need no temporaries, and no + If gcc was alright, it really would need no temporaries, and no stack space to save stuff on. */ register void *return_dst __asm__ ("r10") = pdst; diff --git a/arch/cris/arch-v32/lib/usercopy.c b/arch/cris/arch-v32/lib/usercopy.c index f0b08460c1be..04d0cf35a276 100644 --- a/arch/cris/arch-v32/lib/usercopy.c +++ b/arch/cris/arch-v32/lib/usercopy.c @@ -34,7 +34,7 @@ __copy_user (void __user *pdst, const void *psrc, unsigned long pn) As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop). FIXME: Comment for old gcc version. Check. - If gcc was allright, it really would need no temporaries, and no + If gcc was alright, it really would need no temporaries, and no stack space to save stuff on. */ register char *dst __asm__ ("r13") = pdst; @@ -168,7 +168,7 @@ __copy_user_zeroing (void __user *pdst, const void *psrc, unsigned long pn) As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop). FIXME: Comment for old gcc version. Check. - If gcc was allright, it really would need no temporaries, and no + If gcc was alright, it really would need no temporaries, and no stack space to save stuff on. */ register char *dst __asm__ ("r13") = pdst; @@ -332,7 +332,7 @@ __do_clear_user (void __user *pto, unsigned long pn) As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop). FIXME: Comment for old gcc version. Check. - If gcc was allright, it really would need no temporaries, and no + If gcc was alright, it really would need no temporaries, and no stack space to save stuff on. */ register char *dst __asm__ ("r13") = pto; diff --git a/arch/cris/arch-v32/mm/tlb.c b/arch/cris/arch-v32/mm/tlb.c index c2d12e9c40d7..a076ef6e9389 100644 --- a/arch/cris/arch-v32/mm/tlb.c +++ b/arch/cris/arch-v32/mm/tlb.c @@ -30,8 +30,8 @@ do { \ * The TLB can host up to 256 different mm contexts at the same time. The running * context is found in the PID register. Each TLB entry contains a page_id that * has to match the PID register to give a hit. page_id_map keeps track of which - * mm's is assigned to which page_id's, making sure it's known when to - * invalidate TLB entries. + * mm is assigned to which page_id, making sure it's known when to invalidate TLB + * entries. * * The last page_id is never running, it is used as an invalid page_id so that * it's possible to make TLB entries that will nerver match. @@ -188,7 +188,7 @@ switch_mm(struct mm_struct *prev, struct mm_struct *next, spin_unlock(&mmu_context_lock); /* - * Remember the pgd for the fault handlers. Keep a seperate copy of it + * Remember the pgd for the fault handlers. Keep a separate copy of it * because current and active_mm might be invalid at points where * there's still a need to derefer the pgd. */ diff --git a/arch/cris/kernel/irq.c b/arch/cris/kernel/irq.c index 903ea62c6e21..5c27ff86121b 100644 --- a/arch/cris/kernel/irq.c +++ b/arch/cris/kernel/irq.c @@ -7,7 +7,7 @@ * Authors: Bjorn Wesen (bjornw@axis.com) * * This file contains the code used by various IRQ handling routines: - * asking for different IRQ's should be done through these routines + * asking for different IRQs should be done through these routines * instead of just grabbing them. Thus setups with different IRQ numbers * shouldn't result in any weird surprises, and installing new handlers * should be easier. @@ -15,7 +15,7 @@ */ /* - * IRQ's are in fact implemented a bit like signal handlers for the kernel. + * IRQs are in fact implemented a bit like signal handlers for the kernel. * Naturally it's not a 1:1 relation, but there are similarities. */ @@ -83,9 +83,9 @@ skip: /* called by the assembler IRQ entry functions defined in irq.h - * to dispatch the interrupts to registred handlers + * to dispatch the interrupts to registered handlers * interrupts are disabled upon entry - depending on if the - * interrupt was registred with IRQF_DISABLED or not, interrupts + * interrupt was registered with IRQF_DISABLED or not, interrupts * are re-enabled or not. */ diff --git a/arch/cris/mm/fault.c b/arch/cris/mm/fault.c index 8aab81430695..3034f3ff950c 100644 --- a/arch/cris/mm/fault.c +++ b/arch/cris/mm/fault.c @@ -13,7 +13,7 @@ * Fixed warning. * * Revision 1.18 2005/01/12 08:10:14 starvik - * Readded the change of frametype when handling kernel page fault fixup + * Re-added the change of frametype when handling kernel page fault fixup * for v10. This is necessary to avoid that the CPU remakes the faulting * access. * @@ -49,7 +49,7 @@ * * Revision 1.8 2003/07/04 13:02:48 tobiasa * Moved code snippet from arch/cris/mm/fault.c that searches for fixup code - * to seperate function in arch-specific files. + * to separate function in arch-specific files. * * Revision 1.7 2003/01/22 06:48:38 starvik * Fixed warnings issued by GCC 3.2.1 diff --git a/arch/cris/mm/init.c b/arch/cris/mm/init.c index b7842ff213a6..0c833d176226 100644 --- a/arch/cris/mm/init.c +++ b/arch/cris/mm/init.c @@ -8,7 +8,7 @@ * * $Log: init.c,v $ * Revision 1.11 2004/05/28 09:28:56 starvik - * Calculation of loops_per_usec moved because initalization order has changed + * Calculation of loops_per_usec moved because initialization order has changed * in Linux 2.6. * * Revision 1.10 2004/05/14 07:58:05 starvik diff --git a/arch/cris/mm/tlb.c b/arch/cris/mm/tlb.c index c4a98e2e529e..b7f8de576777 100644 --- a/arch/cris/mm/tlb.c +++ b/arch/cris/mm/tlb.c @@ -16,7 +16,7 @@ /* The TLB can host up to 64 different mm contexts at the same time. * The running context is R_MMU_CONTEXT, and each TLB entry contains a * page_id that has to match to give a hit. In page_id_map, we keep track - * of which mm's we have assigned which page_id's, so that we know when + * of which mm we have assigned to which page_id, so that we know when * to invalidate TLB entries. * * The last page_id is never running - it is used as an invalid page_id diff --git a/arch/frv/kernel/irq.c b/arch/frv/kernel/irq.c index 7ddb69089ed4..73abae767fdc 100644 --- a/arch/frv/kernel/irq.c +++ b/arch/frv/kernel/irq.c @@ -134,7 +134,7 @@ static struct irq_chip frv_cpu_pic = { }; /* - * handles all normal device IRQ's + * handles all normal device IRQs * - registers are referred to by the __frame variable (GR28) * - IRQ distribution is complicated in this arch because of the many PICs, the * way they work and the way they cascade diff --git a/arch/frv/kernel/semaphore.c b/arch/frv/kernel/semaphore.c index 8e182ced1a0f..7ee3a147b471 100644 --- a/arch/frv/kernel/semaphore.c +++ b/arch/frv/kernel/semaphore.c @@ -139,7 +139,7 @@ void __up(struct semaphore *sem) waiter = list_entry(sem->wait_list.next, struct sem_waiter, list); /* We must be careful not to touch 'waiter' after we set ->task = NULL. - * It is an allocated on the waiter's stack and may become invalid at + * It is allocated on the waiter's stack and may become invalid at * any time after that point (due to a wakeup from another source). */ list_del_init(&waiter->list); diff --git a/arch/frv/kernel/time.c b/arch/frv/kernel/time.c index e83e0bccfab9..925fb0199a0f 100644 --- a/arch/frv/kernel/time.c +++ b/arch/frv/kernel/time.c @@ -66,7 +66,7 @@ static irqreturn_t timer_interrupt(int irq, void *dummy) /* * Here we are in the timer irq handler. We just have irqs locally * disabled but we don't know if the timer_bh is running on the other - * CPU. We need to avoid to SMP race with it. NOTE: we don' t need + * CPU. We need to avoid to SMP race with it. NOTE: we don't need * the irq version of write_lock because as just said we have irq * locally disabled. -arca */ @@ -126,7 +126,7 @@ void time_init(void) /* FIX by dqg : Set to zero for platforms that don't have tod */ /* without this time is undefined and can overflow time_t, causing */ - /* very stange errors */ + /* very strange errors */ year = 1980; mon = day = 1; hour = min = sec = 0; diff --git a/arch/h8300/Kconfig.debug b/arch/h8300/Kconfig.debug index 996d97e953b0..ee671c3f2c74 100644 --- a/arch/h8300/Kconfig.debug +++ b/arch/h8300/Kconfig.debug @@ -42,16 +42,16 @@ config SH_STANDARD_BIOS Require eCos/RedBoot config DEFAULT_CMDLINE - bool "Use buildin commandline" + bool "Use builtin commandline" default n help - buildin kernel commandline enabled. + builtin kernel commandline enabled. config KERNEL_COMMAND string "Buildin commmand string" depends on DEFAULT_CMDLINE help - buildin kernel commandline strings. + builtin kernel commandline strings. config BLKDEV_RESERVE bool "BLKDEV Reserved Memory" diff --git a/arch/h8300/kernel/irq.c b/arch/h8300/kernel/irq.c index 43d21e93f41f..8dec4dd57b4e 100644 --- a/arch/h8300/kernel/irq.c +++ b/arch/h8300/kernel/irq.c @@ -68,7 +68,7 @@ static void h8300_shutdown_irq(unsigned int irq) } /* - * h8300 interrupt controler implementation + * h8300 interrupt controller implementation */ struct irq_chip h8300irq_chip = { .name = "H8300-INTC", diff --git a/arch/h8300/kernel/time.c b/arch/h8300/kernel/time.c index 330638220a2e..e37c835e67cf 100644 --- a/arch/h8300/kernel/time.c +++ b/arch/h8300/kernel/time.c @@ -53,7 +53,7 @@ void time_init(void) /* FIX by dqg : Set to zero for platforms that don't have tod */ /* without this time is undefined and can overflow time_t, causing */ - /* very stange errors */ + /* very strange errors */ year = 1980; mon = day = 1; hour = min = sec = 0; diff --git a/arch/h8300/kernel/traps.c b/arch/h8300/kernel/traps.c index f97183011c2c..f8f7d7ea97f1 100644 --- a/arch/h8300/kernel/traps.c +++ b/arch/h8300/kernel/traps.c @@ -5,7 +5,7 @@ * Cloned from Linux/m68k. * * No original Copyright holder listed, - * Probabily original (C) Roman Zippel (assigned DJD, 1999) + * Probable original (C) Roman Zippel (assigned DJD, 1999) * * Copyright 1999-2000 D. Jeff Dionne, <jeff@rt-control.com> * diff --git a/arch/h8300/platform/h8s/ints.c b/arch/h8300/platform/h8s/ints.c index a71d6e2a3919..551fd5f30d82 100644 --- a/arch/h8300/platform/h8s/ints.c +++ b/arch/h8300/platform/h8s/ints.c @@ -179,7 +179,7 @@ int request_irq(unsigned int irq, if (use_kmalloc) irq_handle = kmalloc(sizeof(irq_handler_t), GFP_ATOMIC); else { - /* use bootmem allocater */ + /* use bootmem allocator */ irq_handle = (irq_handler_t *)alloc_bootmem(sizeof(irq_handler_t)); irq_handle = (irq_handler_t *)((unsigned long)irq_handle | 0x80000000); } diff --git a/arch/h8300/platform/h8s/ints_h8s.c b/arch/h8300/platform/h8s/ints_h8s.c index 93395d2a8a07..faa8a459d952 100644 --- a/arch/h8300/platform/h8s/ints_h8s.c +++ b/arch/h8300/platform/h8s/ints_h8s.c @@ -63,7 +63,7 @@ static const struct irq_pins irq_assign_table1[16]={ {H8300_GPIO_P2,H8300_GPIO_B6},{H8300_GPIO_P2,H8300_GPIO_B7}, }; -/* IRQ to GPIO pinno transrate */ +/* IRQ to GPIO pin translation */ #define IRQ_GPIO_MAP(irqbit,irq,port,bit) \ do { \ if (*(volatile unsigned short *)ITSR & irqbit) { \ diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig index d1bedbf9deb8..f6e44fc5283c 100644 --- a/arch/i386/Kconfig +++ b/arch/i386/Kconfig @@ -392,7 +392,7 @@ config X86_MCE_NONFATAL will look at the machine check registers to see if anything happened. Non-fatal problems automatically get corrected (but still logged). Disable this if you don't want to see these messages. - Seeing the messages this option prints out may be indicative of dying hardware, + Seeing the messages this option prints out may be indicative of dying or out-of-spec (ie, overclocked) hardware. This option only does something on certain CPUs. (AMD Athlon/Duron and Intel Pentium 4) @@ -631,7 +631,7 @@ config NUMA default n if X86_PC default y if (X86_NUMAQ || X86_SUMMIT) help - NUMA support for i386. This is currently high experimental + NUMA support for i386. This is currently highly experimental and should be only used for kernel development. It might also cause boot failures. diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index c89108e9770d..bef47725d4ad 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -452,9 +452,9 @@ config IA64_PALINFO config IA64_MC_ERR_INJECT tristate "MC error injection support" help - Selets whether support for MC error injection. By enabling the - support, kernel provide sysfs interface for user application to - call MC error injection PAL procedure to inject various errors. + Adds support for MC error injection. If enabled, the kernel + will provide a sysfs interface for user applications to + call MC error injection PAL procedures to inject various errors. This is a useful tool for MCA testing. If you're unsure, do not select this option. @@ -491,7 +491,7 @@ config KEXEC but it is independent of the system firmware. And like a reboot you can start any kernel with it, not just Linux. - The name comes from the similiarity to the exec system call. + The name comes from the similarity to the exec system call. It is an ongoing process to be certain the hardware in a machine is properly shutdown, so do not be surprised if this code does not diff --git a/arch/m32r/kernel/irq.c b/arch/m32r/kernel/irq.c index f8d8650383e0..d0c5b0b7da2f 100644 --- a/arch/m32r/kernel/irq.c +++ b/arch/m32r/kernel/irq.c @@ -71,7 +71,7 @@ skip: } /* - * do_IRQ handles all normal device IRQ's (the special + * do_IRQ handles all normal device IRQs (the special * SMP cross-CPU interrupts have their own specific * handlers). */ diff --git a/arch/m32r/kernel/signal.c b/arch/m32r/kernel/signal.c index 916faf6070af..a753d79c4e89 100644 --- a/arch/m32r/kernel/signal.c +++ b/arch/m32r/kernel/signal.c @@ -358,7 +358,7 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset) signr = get_signal_to_deliver(&info, &ka, regs, NULL); if (signr > 0) { - /* Reenable any watchpoints before delivering the + /* Re-enable any watchpoints before delivering the * signal to user space. The processor register will * have been cleared if the watchpoint triggered * inside the kernel. diff --git a/arch/m32r/kernel/smp.c b/arch/m32r/kernel/smp.c index 360129174b2b..c837bc13b015 100644 --- a/arch/m32r/kernel/smp.c +++ b/arch/m32r/kernel/smp.c @@ -202,7 +202,7 @@ void smp_flush_cache_all_interrupt(void) } /*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/ -/* TLB flush request Routins */ +/* TLB flush request Routines */ /*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/ /*==========================================================================* @@ -378,7 +378,7 @@ void smp_flush_tlb_page(struct vm_area_struct *vma, unsigned long va) * Name: flush_tlb_others * * Description: This routine requests other CPU to execute flush TLB. - * 1.Setup parmeters. + * 1.Setup parameters. * 2.Send 'INVALIDATE_TLB_IPI' to other CPU. * Request other CPU to execute 'smp_invalidate_interrupt()'. * 3.Wait for other CPUs operation finished. @@ -502,7 +502,7 @@ void smp_invalidate_interrupt(void) } /*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/ -/* Stop CPU request Routins */ +/* Stop CPU request Routines */ /*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/ /*==========================================================================* @@ -566,7 +566,7 @@ static void stop_this_cpu(void *dummy) } /*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/ -/* Call function Routins */ +/* Call function Routines */ /*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/ /*==========================================================================* @@ -690,7 +690,7 @@ void smp_call_function_interrupt(void) } /*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/ -/* Timer Routins */ +/* Timer Routines */ /*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/ /*==========================================================================* @@ -802,7 +802,7 @@ void smp_local_timer_interrupt(void) } /*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/ -/* Send IPI Routins */ +/* Send IPI Routines */ /*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/ /*==========================================================================* @@ -814,7 +814,7 @@ void smp_local_timer_interrupt(void) * * Arguments: ipi_num - Number of IPI * try - 0 : Send IPI certainly. - * !0 : The following IPI is not sended when Target CPU + * !0 : The following IPI is not sent when Target CPU * has not received the before IPI. * * Returns: void (cannot fail) @@ -844,7 +844,7 @@ void send_IPI_allbutself(int ipi_num, int try) * Arguments: cpu_mask - Bitmap of target CPUs logical ID * ipi_num - Number of IPI * try - 0 : Send IPI certainly. - * !0 : The following IPI is not sended when Target CPU + * !0 : The following IPI is not sent when Target CPU * has not received the before IPI. * * Returns: void (cannot fail) @@ -885,7 +885,7 @@ static void send_IPI_mask(cpumask_t cpumask, int ipi_num, int try) * Arguments: cpu_mask - Bitmap of target CPUs physical ID * ipi_num - Number of IPI * try - 0 : Send IPI certainly. - * !0 : The following IPI is not sended when Target CPU + * !0 : The following IPI is not sent when Target CPU * has not received the before IPI. * * Returns: IPICRi regster value. diff --git a/arch/m32r/kernel/smpboot.c b/arch/m32r/kernel/smpboot.c index 9dae410014d8..0e383da158e9 100644 --- a/arch/m32r/kernel/smpboot.c +++ b/arch/m32r/kernel/smpboot.c @@ -133,7 +133,7 @@ static void map_cpu_to_physid(int, int); static void unmap_cpu_to_physid(int, int); /*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/ -/* Boot up APs Routins : BSP */ +/* Boot up APs Routines : BSP */ /*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/ void __devinit smp_prepare_boot_cpu(void) { @@ -404,7 +404,7 @@ void __init smp_cpus_done(unsigned int max_cpus) } /*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/ -/* Activate a secondary processor Routins */ +/* Activate a secondary processor Routines */ /*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/ /*==========================================================================* @@ -509,7 +509,7 @@ static void __init smp_online(void) } /*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/ -/* Boot up CPUs common Routins */ +/* Boot up CPUs common Routines */ /*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/ static void __init show_mp_info(int nr_cpu) { diff --git a/arch/m32r/kernel/sys_m32r.c b/arch/m32r/kernel/sys_m32r.c index 0fc2efec18f6..6d7a80fdad48 100644 --- a/arch/m32r/kernel/sys_m32r.c +++ b/arch/m32r/kernel/sys_m32r.c @@ -214,7 +214,7 @@ asmlinkage int sys_uname(struct old_utsname __user * name) asmlinkage int sys_cacheflush(void *addr, int bytes, int cache) { - /* This should flush more selectivly ... */ + /* This should flush more selectively ... */ _flush_cache_all(); return 0; } diff --git a/arch/m68k/amiga/pcmcia.c b/arch/m68k/amiga/pcmcia.c index fc57c6e72acf..186662ca1a89 100644 --- a/arch/m68k/amiga/pcmcia.c +++ b/arch/m68k/amiga/pcmcia.c @@ -33,7 +33,7 @@ void pcmcia_reset(void) /* copy a tuple, including tuple header. return nb bytes copied */ -/* be carefull as this may trigger a GAYLE_IRQ_WR interrupt ! */ +/* be careful as this may trigger a GAYLE_IRQ_WR interrupt ! */ int pcmcia_copy_tuple(unsigned char tuple_id, void *tuple, int max_len) { diff --git a/arch/m68k/ifpsp060/CHANGES b/arch/m68k/ifpsp060/CHANGES index c1e712dfc2e7..ba96596910fd 100644 --- a/arch/m68k/ifpsp060/CHANGES +++ b/arch/m68k/ifpsp060/CHANGES @@ -4,7 +4,7 @@ M68000 Hi-Performance Microprocessor Division M68060 Software Package Production Release P1.00 -- October 10, 1994 -M68060 Software Package Copyright © 1993, 1994 Motorola Inc. All rights reserved. +M68060 Software Package Copyright © 1993, 1994 Motorola Inc. All rights reserved. THE SOFTWARE is provided on an "AS IS" basis and without warranty. To the maximum extent permitted by applicable law, diff --git a/arch/m68k/ifpsp060/MISC b/arch/m68k/ifpsp060/MISC index b7e644b94ae2..1a63913daa16 100644 --- a/arch/m68k/ifpsp060/MISC +++ b/arch/m68k/ifpsp060/MISC @@ -4,7 +4,7 @@ M68000 Hi-Performance Microprocessor Division M68060 Software Package Production Release P1.00 -- October 10, 1994 -M68060 Software Package Copyright © 1993, 1994 Motorola Inc. All rights reserved. +M68060 Software Package Copyright © 1993, 1994 Motorola Inc. All rights reserved. THE SOFTWARE is provided on an "AS IS" basis and without warranty. To the maximum extent permitted by applicable law, diff --git a/arch/m68k/ifpsp060/README b/arch/m68k/ifpsp060/README index e3bced429bd3..f6f8f5c59419 100644 --- a/arch/m68k/ifpsp060/README +++ b/arch/m68k/ifpsp060/README @@ -4,7 +4,7 @@ M68000 Hi-Performance Microprocessor Division M68060 Software Package Production Release P1.00 -- October 10, 1994 -M68060 Software Package Copyright © 1993, 1994 Motorola Inc. All rights reserved. +M68060 Software Package Copyright © 1993, 1994 Motorola Inc. All rights reserved. THE SOFTWARE is provided on an "AS IS" basis and without warranty. To the maximum extent permitted by applicable law, diff --git a/arch/m68k/ifpsp060/TEST.DOC b/arch/m68k/ifpsp060/TEST.DOC index 5e5900cb2dc4..1ba3aef1500f 100644 --- a/arch/m68k/ifpsp060/TEST.DOC +++ b/arch/m68k/ifpsp060/TEST.DOC @@ -4,7 +4,7 @@ M68000 Hi-Performance Microprocessor Division M68060 Software Package Production Release P1.00 -- October 10, 1994 -M68060 Software Package Copyright © 1993, 1994 Motorola Inc. All rights reserved. +M68060 Software Package Copyright © 1993, 1994 Motorola Inc. All rights reserved. THE SOFTWARE is provided on an "AS IS" basis and without warranty. To the maximum extent permitted by applicable law, diff --git a/arch/m68k/ifpsp060/fplsp.doc b/arch/m68k/ifpsp060/fplsp.doc index fb637c436762..89730a934c5e 100644 --- a/arch/m68k/ifpsp060/fplsp.doc +++ b/arch/m68k/ifpsp060/fplsp.doc @@ -4,7 +4,7 @@ M68000 Hi-Performance Microprocessor Division M68060 Software Package Production Release P1.00 -- October 10, 1994 -M68060 Software Package Copyright © 1993, 1994 Motorola Inc. All rights reserved. +M68060 Software Package Copyright © 1993, 1994 Motorola Inc. All rights reserved. THE SOFTWARE is provided on an "AS IS" basis and without warranty. To the maximum extent permitted by applicable law, diff --git a/arch/m68k/ifpsp060/fpsp.doc b/arch/m68k/ifpsp060/fpsp.doc index 408315209e62..23d513f72ed9 100644 --- a/arch/m68k/ifpsp060/fpsp.doc +++ b/arch/m68k/ifpsp060/fpsp.doc @@ -4,7 +4,7 @@ M68000 Hi-Performance Microprocessor Division M68060 Software Package Production Release P1.00 -- October 10, 1994 -M68060 Software Package Copyright © 1993, 1994 Motorola Inc. All rights reserved. +M68060 Software Package Copyright © 1993, 1994 Motorola Inc. All rights reserved. THE SOFTWARE is provided on an "AS IS" basis and without warranty. To the maximum extent permitted by applicable law, diff --git a/arch/m68k/ifpsp060/fskeleton.S b/arch/m68k/ifpsp060/fskeleton.S index a45a4ff9d2af..0a1ae4f44130 100644 --- a/arch/m68k/ifpsp060/fskeleton.S +++ b/arch/m68k/ifpsp060/fskeleton.S @@ -4,7 +4,7 @@ |M68060 Software Package |Production Release P1.00 -- October 10, 1994 | -|M68060 Software Package Copyright © 1993, 1994 Motorola Inc. All rights reserved. +|M68060 Software Package Copyright © 1993, 1994 Motorola Inc. All rights reserved. | |THE SOFTWARE is provided on an "AS IS" basis and without warranty. |To the maximum extent permitted by applicable law, diff --git a/arch/m68k/ifpsp060/ilsp.doc b/arch/m68k/ifpsp060/ilsp.doc index f6fae6d900ae..4e6292f095aa 100644 --- a/arch/m68k/ifpsp060/ilsp.doc +++ b/arch/m68k/ifpsp060/ilsp.doc @@ -4,7 +4,7 @@ M68000 Hi-Performance Microprocessor Division M68060 Software Package Production Release P1.00 -- October 10, 1994 -M68060 Software Package Copyright © 1993, 1994 Motorola Inc. All rights reserved. +M68060 Software Package Copyright © 1993, 1994 Motorola Inc. All rights reserved. THE SOFTWARE is provided on an "AS IS" basis and without warranty. To the maximum extent permitted by applicable law, diff --git a/arch/m68k/ifpsp060/iskeleton.S b/arch/m68k/ifpsp060/iskeleton.S index b2dbdf5ee309..91a9c65fee8a 100644 --- a/arch/m68k/ifpsp060/iskeleton.S +++ b/arch/m68k/ifpsp060/iskeleton.S @@ -4,7 +4,7 @@ |M68060 Software Package |Production Release P1.00 -- October 10, 1994 | -|M68060 Software Package Copyright © 1993, 1994 Motorola Inc. All rights reserved. +|M68060 Software Package Copyright © 1993, 1994 Motorola Inc. All rights reserved. | |THE SOFTWARE is provided on an "AS IS" basis and without warranty. |To the maximum extent permitted by applicable law, diff --git a/arch/m68k/ifpsp060/isp.doc b/arch/m68k/ifpsp060/isp.doc index 5a90fded3f0b..9dadd727fc50 100644 --- a/arch/m68k/ifpsp060/isp.doc +++ b/arch/m68k/ifpsp060/isp.doc @@ -4,7 +4,7 @@ M68000 Hi-Performance Microprocessor Division M68060 Software Package Production Release P1.00 -- October 10, 1994 -M68060 Software Package Copyright © 1993, 1994 Motorola Inc. All rights reserved. +M68060 Software Package Copyright © 1993, 1994 Motorola Inc. All rights reserved. THE SOFTWARE is provided on an "AS IS" basis and without warranty. To the maximum extent permitted by applicable law, diff --git a/arch/m68k/ifpsp060/os.S b/arch/m68k/ifpsp060/os.S index aa4df87a6c42..7a0d6e428066 100644 --- a/arch/m68k/ifpsp060/os.S +++ b/arch/m68k/ifpsp060/os.S @@ -4,7 +4,7 @@ |M68060 Software Package |Production Release P1.00 -- October 10, 1994 | -|M68060 Software Package Copyright © 1993, 1994 Motorola Inc. All rights reserved. +|M68060 Software Package Copyright © 1993, 1994 Motorola Inc. All rights reserved. | |THE SOFTWARE is provided on an "AS IS" basis and without warranty. |To the maximum extent permitted by applicable law, diff --git a/arch/m68k/ifpsp060/src/fplsp.S b/arch/m68k/ifpsp060/src/fplsp.S index fdb79b927ef1..3b7ea2dc9f1b 100644 --- a/arch/m68k/ifpsp060/src/fplsp.S +++ b/arch/m68k/ifpsp060/src/fplsp.S @@ -4,7 +4,7 @@ M68000 Hi-Performance Microprocessor Division M68060 Software Package Production Release P1.00 -- October 10, 1994 -M68060 Software Package Copyright © 1993, 1994 Motorola Inc. All rights reserved. +M68060 Software Package Copyright © 1993, 1994 Motorola Inc. All rights reserved. THE SOFTWARE is provided on an "AS IS" basis and without warranty. To the maximum extent permitted by applicable law, diff --git a/arch/m68k/ifpsp060/src/fpsp.S b/arch/m68k/ifpsp060/src/fpsp.S index 3b597a9bbf43..6c1a9a217887 100644 --- a/arch/m68k/ifpsp060/src/fpsp.S +++ b/arch/m68k/ifpsp060/src/fpsp.S @@ -4,7 +4,7 @@ M68000 Hi-Performance Microprocessor Division M68060 Software Package Production Release P1.00 -- October 10, 1994 -M68060 Software Package Copyright © 1993, 1994 Motorola Inc. All rights reserved. +M68060 Software Package Copyright © 1993, 1994 Motorola Inc. All rights reserved. THE SOFTWARE is provided on an "AS IS" basis and without warranty. To the maximum extent permitted by applicable law, diff --git a/arch/m68k/ifpsp060/src/ftest.S b/arch/m68k/ifpsp060/src/ftest.S index 2edcbae0fd53..1f947915d81e 100644 --- a/arch/m68k/ifpsp060/src/ftest.S +++ b/arch/m68k/ifpsp060/src/ftest.S @@ -4,7 +4,7 @@ M68000 Hi-Performance Microprocessor Division M68060 Software Package Production Release P1.00 -- October 10, 1994 -M68060 Software Package Copyright © 1993, 1994 Motorola Inc. All rights reserved. +M68060 Software Package Copyright © 1993, 1994 Motorola Inc. All rights reserved. THE SOFTWARE is provided on an "AS IS" basis and without warranty. To the maximum extent permitted by applicable law, diff --git a/arch/m68k/ifpsp060/src/ilsp.S b/arch/m68k/ifpsp060/src/ilsp.S index afa7422cddb5..970abaf3303e 100644 --- a/arch/m68k/ifpsp060/src/ilsp.S +++ b/arch/m68k/ifpsp060/src/ilsp.S @@ -4,7 +4,7 @@ M68000 Hi-Performance Microprocessor Division M68060 Software Package Production Release P1.00 -- October 10, 1994 -M68060 Software Package Copyright © 1993, 1994 Motorola Inc. All rights reserved. +M68060 Software Package Copyright © 1993, 1994 Motorola Inc. All rights reserved. THE SOFTWARE is provided on an "AS IS" basis and without warranty. To the maximum extent permitted by applicable law, diff --git a/arch/m68k/ifpsp060/src/isp.S b/arch/m68k/ifpsp060/src/isp.S index b269091d9df6..6dccda766e22 100644 --- a/arch/m68k/ifpsp060/src/isp.S +++ b/arch/m68k/ifpsp060/src/isp.S @@ -4,7 +4,7 @@ M68000 Hi-Performance Microprocessor Division M68060 Software Package Production Release P1.00 -- October 10, 1994 -M68060 Software Package Copyright © 1993, 1994 Motorola Inc. All rights reserved. +M68060 Software Package Copyright © 1993, 1994 Motorola Inc. All rights reserved. THE SOFTWARE is provided on an "AS IS" basis and without warranty. To the maximum extent permitted by applicable law, diff --git a/arch/m68k/ifpsp060/src/itest.S b/arch/m68k/ifpsp060/src/itest.S index ba4a30cbcbea..beca47e7d514 100644 --- a/arch/m68k/ifpsp060/src/itest.S +++ b/arch/m68k/ifpsp060/src/itest.S @@ -4,7 +4,7 @@ M68000 Hi-Performance Microprocessor Division M68060 Software Package Production Release P1.00 -- October 10, 1994 -M68060 Software Package Copyright © 1993, 1994 Motorola Inc. All rights reserved. +M68060 Software Package Copyright © 1993, 1994 Motorola Inc. All rights reserved. THE SOFTWARE is provided on an "AS IS" basis and without warranty. To the maximum extent permitted by applicable law, diff --git a/arch/m68k/ifpsp060/src/pfpsp.S b/arch/m68k/ifpsp060/src/pfpsp.S index 0c997c436beb..51b9f7d879dd 100644 --- a/arch/m68k/ifpsp060/src/pfpsp.S +++ b/arch/m68k/ifpsp060/src/pfpsp.S @@ -4,7 +4,7 @@ M68000 Hi-Performance Microprocessor Division M68060 Software Package Production Release P1.00 -- October 10, 1994 -M68060 Software Package Copyright © 1993, 1994 Motorola Inc. All rights reserved. +M68060 Software Package Copyright © 1993, 1994 Motorola Inc. All rights reserved. THE SOFTWARE is provided on an "AS IS" basis and without warranty. To the maximum extent permitted by applicable law, diff --git a/arch/m68k/mac/config.c b/arch/m68k/mac/config.c index 8547dbc5e8d7..01b468b9392e 100644 --- a/arch/m68k/mac/config.c +++ b/arch/m68k/mac/config.c @@ -284,7 +284,7 @@ static struct mac_model mac_data_table[] = { }, /* - * Weirdified MacII hardware - all subtley different. Gee thanks + * Weirdified MacII hardware - all subtly different. Gee thanks * Apple. All these boxes seem to have VIA2 in a different place to * the MacII (+1A000 rather than +4000) * CSA: see http://developer.apple.com/technotes/hw/hw_09.html @@ -707,7 +707,7 @@ static struct mac_model mac_data_table[] = { * All of these probably have onboard SONIC in the Dock which * means we'll have to probe for it eventually. * - * Are these reallly MAC_VIA_IIci? The developer notes for the + * Are these really MAC_VIA_IIci? The developer notes for the * Duos show pretty much the same custom parts as in most of * the other PowerBooks which would imply MAC_VIA_QUADRA. */ diff --git a/arch/m68k/mac/iop.c b/arch/m68k/mac/iop.c index 0cea21f58192..5b2799eb96a6 100644 --- a/arch/m68k/mac/iop.c +++ b/arch/m68k/mac/iop.c @@ -100,7 +100,7 @@ * finished; this function moves the message state to MSG_COMPLETE and signals * the IOP. This two-step process is provided to allow the handler to defer * message processing to a bottom-half handler if the processing will take - * a signifigant amount of time (handlers are called at interrupt time so they + * a significant amount of time (handlers are called at interrupt time so they * should execute quickly.) */ @@ -120,7 +120,7 @@ /*#define DEBUG_IOP*/ -/* Set to nonezero if the IOPs are present. Set by iop_init() */ +/* Set to non-zero if the IOPs are present. Set by iop_init() */ int iop_scc_present,iop_ism_present; diff --git a/arch/m68k/mac/oss.c b/arch/m68k/mac/oss.c index d7be16917efd..50603d3dce84 100644 --- a/arch/m68k/mac/oss.c +++ b/arch/m68k/mac/oss.c @@ -8,7 +8,7 @@ * * 990502 (jmt) - Major rewrite for new interrupt architecture as well as some * recent insights into OSS operational details. - * 990610 (jmt) - Now taking fulll advantage of the OSS. Interrupts are mapped + * 990610 (jmt) - Now taking full advantage of the OSS. Interrupts are mapped * to mostly match the A/UX interrupt scheme supported on the * VIA side. Also added support for enabling the ISM irq again * since we now have a functional IOP manager. diff --git a/arch/m68k/mac/via.c b/arch/m68k/mac/via.c index d5cac72eb3db..8df270e950fa 100644 --- a/arch/m68k/mac/via.c +++ b/arch/m68k/mac/via.c @@ -1,7 +1,7 @@ /* * 6522 Versatile Interface Adapter (VIA) * - * There are two of these on the Mac II. Some IRQ's are vectored + * There are two of these on the Mac II. Some IRQs are vectored * via them as are assorted bits and bobs - eg RTC, ADB. * * CSA: Motorola seems to have removed documentation on the 6522 from diff --git a/arch/m68k/math-emu/fp_log.c b/arch/m68k/math-emu/fp_log.c index 87b4f0158560..b1033ae0d6f0 100644 --- a/arch/m68k/math-emu/fp_log.c +++ b/arch/m68k/math-emu/fp_log.c @@ -65,7 +65,7 @@ fp_fsqrt(struct fp_ext *dest, struct fp_ext *src) fp_copy_ext(&src2, dest); /* - * The taylor row arround a for sqrt(x) is: + * The taylor row around a for sqrt(x) is: * sqrt(x) = sqrt(a) + 1/(2*sqrt(a))*(x-a) + R * With a=1 this gives: * sqrt(x) = 1 + 1/2*(x-1) diff --git a/arch/m68k/q40/q40ints.c b/arch/m68k/q40/q40ints.c index ad3ed1fb8879..46161cef08b9 100644 --- a/arch/m68k/q40/q40ints.c +++ b/arch/m68k/q40/q40ints.c @@ -184,7 +184,7 @@ static struct IRQ_TABLE eirqs[] = { }; /* complain only this many times about spurious ints : */ -static int ccleirq=60; /* ISA dev IRQ's*/ +static int ccleirq=60; /* ISA dev IRQs*/ /*static int cclirq=60;*/ /* internal */ /* FIXME: add shared ints,mask,unmask,probing.... */ @@ -234,7 +234,7 @@ static void q40_irq_handler(unsigned int irq, struct pt_regs *fp) * There is a little mess wrt which IRQ really caused this irq request. The * main problem is that IIRQ_REG and EIRQ_REG reflect the state when they * are read - which is long after the request came in. In theory IRQs should - * not just go away but they occassionally do + * not just go away but they occasionally do */ if (irq > 4 && irq <= 15 && mext_disabled) { /*aliased_irq++;*/ diff --git a/arch/m68k/sun3/mmu_emu.c b/arch/m68k/sun3/mmu_emu.c index 7a0e3a220687..fb0f6a20cc3c 100644 --- a/arch/m68k/sun3/mmu_emu.c +++ b/arch/m68k/sun3/mmu_emu.c @@ -239,7 +239,7 @@ void clear_context(unsigned long context) /* gets an empty context. if full, kills the next context listed to die first */ /* This context invalidation scheme is, well, totally arbitrary, I'm - sure it could be much more intellegent... but it gets the job done + sure it could be much more intelligent... but it gets the job done for now without much overhead in making it's decision. */ /* todo: come up with optimized scheme for flushing contexts */ unsigned long get_free_context(struct mm_struct *mm) diff --git a/arch/m68k/tools/amiga/dmesg.c b/arch/m68k/tools/amiga/dmesg.c index e892748e7386..7340f5b6cf6d 100644 --- a/arch/m68k/tools/amiga/dmesg.c +++ b/arch/m68k/tools/amiga/dmesg.c @@ -3,7 +3,7 @@ * in Chip RAM with the kernel command * line option `debug=mem'. * - * © Copyright 1996 by Geert Uytterhoeven <geert@linux-m68k.org> + * © Copyright 1996 by Geert Uytterhoeven <geert@linux-m68k.org> * * * Usage: diff --git a/arch/m68knommu/platform/5307/pit.c b/arch/m68knommu/platform/5307/pit.c index e53c446d10e4..f18352fa35a6 100644 --- a/arch/m68knommu/platform/5307/pit.c +++ b/arch/m68knommu/platform/5307/pit.c @@ -83,7 +83,7 @@ unsigned long coldfire_pit_offset(void) /* * If we are still in the first half of the upcount and a - * timer interupt is pending, then add on a ticks worth of time. + * timer interrupt is pending, then add on a ticks worth of time. */ offset = ((pmr - pcntr) * (1000000 / HZ)) / pmr; if ((offset < (1000000 / HZ / 2)) && (*ipr & MCFPIT_IMR_IBIT)) diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 4dc142d394a3..3ecff5e9e4f3 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -1812,7 +1812,7 @@ config KEXEC but it is independent of the system firmware. And like a reboot you can start any kernel with it, not just Linux. - The name comes from the similiarity to the exec system call. + The name comes from the similarity to the exec system call. It is an ongoing process to be certain the hardware in a machine is properly shutdown, so do not be surprised if this code does not diff --git a/arch/mips/kernel/module.c b/arch/mips/kernel/module.c index cb0801437b66..e7ed0ac48537 100644 --- a/arch/mips/kernel/module.c +++ b/arch/mips/kernel/module.c @@ -381,7 +381,7 @@ const struct exception_table_entry *search_module_dbetables(unsigned long addr) return e; } -/* Put in dbe list if neccessary. */ +/* Put in dbe list if necessary. */ int module_finalize(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs, struct module *me) diff --git a/arch/mips/pci/pci-excite.c b/arch/mips/pci/pci-excite.c index 3c86c77cb74f..8a56876afcc6 100644 --- a/arch/mips/pci/pci-excite.c +++ b/arch/mips/pci/pci-excite.c @@ -131,7 +131,7 @@ static int __init basler_excite_pci_setup(void) ocd_writel(0x00000000, bar + 0x100); } - /* Finally, enable the PCI interupt */ + /* Finally, enable the PCI interrupt */ #if USB_IRQ > 7 set_c0_intcontrol(1 << USB_IRQ); #else diff --git a/arch/mips/sni/pcimt.c b/arch/mips/sni/pcimt.c index 39bb15f1f2a6..4df070f2ff5d 100644 --- a/arch/mips/sni/pcimt.c +++ b/arch/mips/sni/pcimt.c @@ -246,7 +246,7 @@ static void pcimt_hwint1(void) /* * Note: ASIC PCI's builtin interrupt achknowledge feature is * broken. Using it may result in loss of some or all i8259 - * interupts, so don't use PCIMT_INT_ACKNOWLEDGE ... + * interrupts, so don't use PCIMT_INT_ACKNOWLEDGE ... */ irq = i8259_irq(); if (unlikely(irq < 0)) diff --git a/arch/powerpc/kernel/cpu_setup_6xx.S b/arch/powerpc/kernel/cpu_setup_6xx.S index 8b4a4ee85eca..f1ee0b3f78f2 100644 --- a/arch/powerpc/kernel/cpu_setup_6xx.S +++ b/arch/powerpc/kernel/cpu_setup_6xx.S @@ -113,7 +113,7 @@ setup_604_hid0: * around #3 and with the same fix we use. We may want to * check if the CPU is using 60x bus mode in which case * the workaround for errata #4 is useless. Also, we may - * want to explicitely clear HID0_NOPDST as this is not + * want to explicitly clear HID0_NOPDST as this is not * needed once we have applied workaround #5 (though it's * not set by Apple's firmware at least). */ diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 2250f9e6c5ca..b0e5deb4274f 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -491,7 +491,7 @@ struct irq_host *irq_alloc_host(struct device_node *of_node, /* Legacy flags are left to default at this point, * one can then use irq_create_mapping() to - * explicitely change them + * explicitly change them */ ops->map(host, i, i); } diff --git a/arch/powerpc/kernel/l2cr_6xx.S b/arch/powerpc/kernel/l2cr_6xx.S index 858f28ac8a06..2a2f3c3f6d80 100644 --- a/arch/powerpc/kernel/l2cr_6xx.S +++ b/arch/powerpc/kernel/l2cr_6xx.S @@ -1,6 +1,6 @@ /* L2CR functions - Copyright © 1997-1998 by PowerLogix R & D, Inc. + Copyright © 1997-1998 by PowerLogix R & D, Inc. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig index 229d355ed86a..ea22cad2cd0a 100644 --- a/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig @@ -120,7 +120,7 @@ config PPC_PMI depends on PPC_IBM_CELL_BLADE help PMI (Platform Management Interrupt) is a way to - communicate with the BMC (Baseboard Mangement Controller). + communicate with the BMC (Baseboard Management Controller). It is used in some IBM Cell blades. default m diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c index d72b16d6816e..d9e56a503795 100644 --- a/arch/powerpc/platforms/cell/spufs/file.c +++ b/arch/powerpc/platforms/cell/spufs/file.c @@ -748,7 +748,7 @@ static ssize_t spufs_wbox_write(struct file *file, const char __user *buf, if (count) goto out; - /* write aÑ• much as possible */ + /* write as much as possible */ for (count = 4, udata++; (count + 4) <= len; count += 4, udata++) { int ret; ret = __get_user(wbox_data, udata); diff --git a/arch/powerpc/platforms/celleb/scc_uhc.c b/arch/powerpc/platforms/celleb/scc_uhc.c index a7c548bde2e3..b59c38a06e3e 100644 --- a/arch/powerpc/platforms/celleb/scc_uhc.c +++ b/arch/powerpc/platforms/celleb/scc_uhc.c @@ -36,7 +36,7 @@ static inline int uhc_clkctrl_ready(u32 val) } /* - * UHC(usb host controler) enable function. + * UHC(usb host controller) enable function. * affect to both of OHCI and EHCI core module. */ static void enable_scc_uhc(struct pci_dev *dev) diff --git a/arch/sh64/kernel/pci_sh5.c b/arch/sh64/kernel/pci_sh5.c index 388bb711f1b0..b4d9534d2b0e 100644 --- a/arch/sh64/kernel/pci_sh5.c +++ b/arch/sh64/kernel/pci_sh5.c @@ -480,7 +480,7 @@ static int __init pcibios_init(void) return -EINVAL; } - /* The pci subsytem needs to know where memory is and how much + /* The pci subsystem needs to know where memory is and how much * of it there is. I've simply made these globals. A better mechanism * is probably needed. */ diff --git a/arch/um/Kconfig b/arch/um/Kconfig index d8925d285573..dd1689b814cb 100644 --- a/arch/um/Kconfig +++ b/arch/um/Kconfig @@ -3,7 +3,7 @@ config DEFCONFIG_LIST option defconfig_list default "arch/$ARCH/defconfig" -# UML uses the generic IRQ sugsystem +# UML uses the generic IRQ subsystem config GENERIC_HARDIRQS bool default y diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c index 76fe0b0da996..83bf15a3dda8 100644 --- a/arch/um/drivers/line.c +++ b/arch/um/drivers/line.c @@ -35,7 +35,7 @@ static void line_timer_cb(struct work_struct *work) /* * Returns the free space inside the ring buffer of this line. * - * Should be called while holding line->lock (this does not modify datas). + * Should be called while holding line->lock (this does not modify data). */ static int write_room(struct line *line) { diff --git a/arch/um/drivers/null.c b/arch/um/drivers/null.c index 21ad3d7932b3..2b45a1446c86 100644 --- a/arch/um/drivers/null.c +++ b/arch/um/drivers/null.c @@ -9,7 +9,7 @@ #include "chan_user.h" #include "os.h" -/* This address is used only as a unique identifer */ +/* This address is used only as a unique identifier */ static int null_chan; static void *null_init(char *str, int device, const struct chan_opts *opts) diff --git a/arch/um/drivers/stderr_console.c b/arch/um/drivers/stderr_console.c index 4739dd527b43..d07a97f8b994 100644 --- a/arch/um/drivers/stderr_console.c +++ b/arch/um/drivers/stderr_console.c @@ -8,7 +8,7 @@ /* trivial console driver -- simply dump everything to stderr */ /* - * Don't register by default -- as this registeres very early in the + * Don't register by default -- as this registers very early in the * boot process it becomes the default console. * * Initialized at init time. diff --git a/arch/um/kernel/gmon_syms.c b/arch/um/kernel/gmon_syms.c index 13aa115cd1b4..734f873cab12 100644 --- a/arch/um/kernel/gmon_syms.c +++ b/arch/um/kernel/gmon_syms.c @@ -12,8 +12,8 @@ EXPORT_SYMBOL(__bb_init_func); * versions in libgcov. * * Since SuSE backported the fix, we cannot handle it depending on GCC version. - * So, unconditinally export it. But also give it a weak declaration, which will - * be overriden by any other one. + * So, unconditionally export it. But also give it a weak declaration, which will + * be overridden by any other one. */ extern void __gcov_init(void *) __attribute__((weak)); diff --git a/arch/um/kernel/irq.c b/arch/um/kernel/irq.c index 277fce17b088..70c2d625b070 100644 --- a/arch/um/kernel/irq.c +++ b/arch/um/kernel/irq.c @@ -326,7 +326,7 @@ int deactivate_all_fds(void) } /* - * do_IRQ handles all normal device IRQ's (the special + * do_IRQ handles all normal device IRQs (the special * SMP cross-CPU interrupts have their own specific * handlers). */ diff --git a/arch/um/kernel/ptrace.c b/arch/um/kernel/ptrace.c index a0eba0833068..47b57b497d55 100644 --- a/arch/um/kernel/ptrace.c +++ b/arch/um/kernel/ptrace.c @@ -237,7 +237,7 @@ void send_sigtrap(struct task_struct *tsk, struct uml_pt_regs *regs, /* User-mode eip? */ info.si_addr = UPT_IS_USER(regs) ? (void __user *) UPT_IP(regs) : NULL; - /* Send us the fakey SIGTRAP */ + /* Send us the fake SIGTRAP */ force_sig_info(SIGTRAP, &info, tsk); } diff --git a/arch/um/sys-i386/bug.c b/arch/um/sys-i386/bug.c index 200c8ba2879b..a4360b5207db 100644 --- a/arch/um/sys-i386/bug.c +++ b/arch/um/sys-i386/bug.c @@ -6,7 +6,7 @@ #include <linux/uaccess.h> /* Mostly copied from i386/x86_86 - eliminated the eip < PAGE_OFFSET because - * that's not relevent in skas mode. + * that's not relevant in skas mode. */ int is_valid_bugaddr(unsigned long eip) diff --git a/arch/um/sys-i386/tls.c b/arch/um/sys-i386/tls.c index b02266ab5c55..fcaff86b000c 100644 --- a/arch/um/sys-i386/tls.c +++ b/arch/um/sys-i386/tls.c @@ -45,7 +45,7 @@ int do_get_thread_area(struct user_desc *info) * XXX: Consider leaving one free slot for glibc usage at first place. This must * be done here (and by changing GDT_ENTRY_TLS_* macros) and nowhere else. * - * Also, this must be tested when compiling in SKAS mode with dinamic linking + * Also, this must be tested when compiling in SKAS mode with dynamic linking * and running against NPTL. */ static int get_free_idx(struct task_struct* task) diff --git a/arch/um/sys-x86_64/bug.c b/arch/um/sys-x86_64/bug.c index 200c8ba2879b..a4360b5207db 100644 --- a/arch/um/sys-x86_64/bug.c +++ b/arch/um/sys-x86_64/bug.c @@ -6,7 +6,7 @@ #include <linux/uaccess.h> /* Mostly copied from i386/x86_86 - eliminated the eip < PAGE_OFFSET because - * that's not relevent in skas mode. + * that's not relevant in skas mode. */ int is_valid_bugaddr(unsigned long eip) diff --git a/arch/v850/kernel/me2.c b/arch/v850/kernel/me2.c index 38be5c194f6b..007115dc9ce0 100644 --- a/arch/v850/kernel/me2.c +++ b/arch/v850/kernel/me2.c @@ -58,13 +58,13 @@ void __init me2_init_irqs (void) void me2_uart_pre_configure (unsigned chan, unsigned cflags, unsigned baud) { if (chan == 0) { - /* Specify that the relevent pins on the chip should do + /* Specify that the relevant pins on the chip should do serial I/O, not direct I/O. */ ME2_PORT1_PMC |= 0xC; /* Specify that we're using the UART, not the CSI device. */ ME2_PORT1_PFC |= 0xC; } else if (chan == 1) { - /* Specify that the relevent pins on the chip should do + /* Specify that the relevant pins on the chip should do serial I/O, not direct I/O. */ ME2_PORT2_PMC |= 0x6; /* Specify that we're using the UART, not the CSI device. */ diff --git a/arch/v850/kernel/rte_mb_a_pci.c b/arch/v850/kernel/rte_mb_a_pci.c index 35a4bd5515cb..7165478824e7 100644 --- a/arch/v850/kernel/rte_mb_a_pci.c +++ b/arch/v850/kernel/rte_mb_a_pci.c @@ -179,7 +179,7 @@ static int __devinit pcibios_init (void) default uses. */ /* Significant address bits used for decoding PCI GCS5 space - accessess. */ + accesses. */ MB_A_PCI_DMRR = ~(MB_A_PCI_MEM_SIZE - 1); /* I don't understand this, but the SolutionGear example code @@ -775,7 +775,7 @@ pci_alloc_consistent (struct pci_dev *pdev, size_t size, dma_addr_t *dma_addr) /* Free and unmap a consistent DMA buffer. CPU_ADDR and DMA_ADDR must be values that were returned from pci_alloc_consistent. SIZE must be the same as what as passed into pci_alloc_consistent. References to - the memory and mappings assosciated with CPU_ADDR or DMA_ADDR past + the memory and mappings associated with CPU_ADDR or DMA_ADDR past this call are illegal. */ void pci_free_consistent (struct pci_dev *pdev, size_t size, void *cpu_addr, diff --git a/arch/x86/boot/compressed/misc_32.c b/arch/x86/boot/compressed/misc_32.c index b28505c544c9..1dc1e19c0a9f 100644 --- a/arch/x86/boot/compressed/misc_32.c +++ b/arch/x86/boot/compressed/misc_32.c @@ -25,7 +25,7 @@ /* * Getting to provable safe in place decompression is hard. - * Worst case behaviours need to be analized. + * Worst case behaviours need to be analyzed. * Background information: * * The file layout is: @@ -94,7 +94,7 @@ * Adding 32768 instead of 32767 just makes for round numbers. * Adding the decompressor_size is necessary as it musht live after all * of the data as well. Last I measured the decompressor is about 14K. - * 10K of actuall data and 4K of bss. + * 10K of actual data and 4K of bss. * */ diff --git a/arch/x86/boot/compressed/misc_64.c b/arch/x86/boot/compressed/misc_64.c index f932b0e89096..6ea015aa65e4 100644 --- a/arch/x86/boot/compressed/misc_64.c +++ b/arch/x86/boot/compressed/misc_64.c @@ -25,7 +25,7 @@ /* * Getting to provable safe in place decompression is hard. - * Worst case behaviours need to be analized. + * Worst case behaviours need to be analyzed. * Background information: * * The file layout is: @@ -94,7 +94,7 @@ * Adding 32768 instead of 32767 just makes for round numbers. * Adding the decompressor_size is necessary as it musht live after all * of the data as well. Last I measured the decompressor is about 14K. - * 10K of actuall data and 4K of bss. + * 10K of actual data and 4K of bss. * */ diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index f28b2e251b1d..289247d974c6 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -99,7 +99,7 @@ static u64 acpi_lapic_addr __initdata = APIC_DEFAULT_PHYS_BASE; /* * The default interrupt routing model is PIC (8259). This gets - * overriden if IOAPICs are enumerated (below). + * overridden if IOAPICs are enumerated (below). */ enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_PIC; @@ -414,8 +414,8 @@ acpi_parse_nmi_src(struct acpi_subtable_header * header, const unsigned long end * * Port 0x4d0-4d1 are ECLR1 and ECLR2, the Edge/Level Control Registers * for the 8259 PIC. bit[n] = 1 means irq[n] is Level, otherwise Edge. - * ECLR1 is IRQ's 0-7 (IRQ 0, 1, 2 must be 0) - * ECLR2 is IRQ's 8-15 (IRQ 8, 13 must be 0) + * ECLR1 is IRQs 0-7 (IRQ 0, 1, 2 must be 0) + * ECLR2 is IRQs 8-15 (IRQ 8, 13 must be 0) */ void __init acpi_pic_sci_set_trigger(unsigned int irq, u16 trigger) @@ -427,7 +427,7 @@ void __init acpi_pic_sci_set_trigger(unsigned int irq, u16 trigger) old = inb(0x4d0) | (inb(0x4d1) << 8); /* - * If we use ACPI to set PCI irq's, then we should clear ELCR + * If we use ACPI to set PCI IRQs, then we should clear ELCR * since we will set it correctly as we enable the PCI irq * routing. */ diff --git a/arch/x86/kernel/apic_32.c b/arch/x86/kernel/apic_32.c index 793341fffc81..08b07c176962 100644 --- a/arch/x86/kernel/apic_32.c +++ b/arch/x86/kernel/apic_32.c @@ -947,7 +947,7 @@ void __devinit setup_local_APIC(void) * Set up LVT0, LVT1: * * set up through-local-APIC on the BP's LINT0. This is not - * strictly necessery in pure symmetric-IO mode, but sometimes + * strictly necessary in pure symmetric-IO mode, but sometimes * we delegate interrupts to the 8259A. */ /* @@ -998,7 +998,7 @@ void __devinit setup_local_APIC(void) } else { if (esr_disable) /* - * Something untraceble is creating bad interrupts on + * Something untraceable is creating bad interrupts on * secondary quads ... for the moment, just leave the * ESR disabled - we can't do anything useful with the * errors anyway - mbligh diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c index 32f2365c26ed..17089a041028 100644 --- a/arch/x86/kernel/apm_32.c +++ b/arch/x86/kernel/apm_32.c @@ -57,7 +57,7 @@ * screen-blanking and gpm (Stephen Rothwell); Linux 1.99.4 * 1.2a:Simple change to stop mysterious bug reports with SMP also added * levels to the printk calls. APM is not defined for SMP machines. - * The new replacment for it is, but Linux doesn't yet support this. + * The new replacement for it is, but Linux doesn't yet support this. * Alan Cox Linux 2.1.55 * 1.3: Set up a valid data descriptor 0x40 for buggy BIOS's * 1.4: Upgraded to support APM 1.2. Integrated ThinkPad suspend patch by diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index 5f8af875f457..1ff88c7f45cf 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -266,7 +266,7 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c) #ifdef CONFIG_X86_HT /* * On a AMD multi core setup the lower bits of the APIC id - * distingush the cores. + * distinguish the cores. */ if (c->x86_max_cores > 1) { int cpu = smp_processor_id(); diff --git a/arch/x86/kernel/cpu/centaur.c b/arch/x86/kernel/cpu/centaur.c index 473eac883c7b..9681fa15ddf0 100644 --- a/arch/x86/kernel/cpu/centaur.c +++ b/arch/x86/kernel/cpu/centaur.c @@ -53,7 +53,7 @@ static u32 __cpuinit ramtop(void) /* 16388 */ continue; /* * Don't MCR over reserved space. Ignore the ISA hole - * we frob around that catastrophy already + * we frob around that catastrophe already */ if (e820.map[i].type == E820_RESERVED) @@ -287,7 +287,7 @@ static void __cpuinit init_c3(struct cpuinfo_x86 *c) c->x86_capability[5] = cpuid_edx(0xC0000001); } - /* Cyrix III family needs CX8 & PGE explicity enabled. */ + /* Cyrix III family needs CX8 & PGE explicitly enabled. */ if (c->x86_model >=6 && c->x86_model <= 9) { rdmsr (MSR_VIA_FCR, lo, hi); lo |= (1<<1 | 1<<7); diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index d506201d397c..e2fcf2051bdb 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -207,7 +207,7 @@ static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c, int early) static int __init x86_fxsr_setup(char * s) { - /* Tell all the other CPU's to not use it... */ + /* Tell all the other CPUs to not use it... */ disable_x86_fxsr = 1; /* diff --git a/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c b/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c index 32f0bda3fc95..f03e9153618e 100644 --- a/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c +++ b/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c @@ -260,7 +260,7 @@ static int nforce2_target(struct cpufreq_policy *policy, freqs.old = nforce2_get(policy->cpu); freqs.new = target_fsb * fid * 100; - freqs.cpu = 0; /* Only one CPU on nForce2 plattforms */ + freqs.cpu = 0; /* Only one CPU on nForce2 platforms */ if (freqs.old == freqs.new) return 0; diff --git a/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c b/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c index ed2bda127c44..2ed7db2fd257 100644 --- a/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c +++ b/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c @@ -12,12 +12,12 @@ * of any nature resulting due to the use of this software. This * software is provided AS-IS with no warranties. * - * Theoritical note: + * Theoretical note: * * (see Geode(tm) CS5530 manual (rev.4.1) page.56) * * CPU frequency control on NatSemi Geode GX1/GXLV processor and CS55x0 - * are based on Suspend Moduration. + * are based on Suspend Modulation. * * Suspend Modulation works by asserting and de-asserting the SUSP# pin * to CPU(GX1/GXLV) for configurable durations. When asserting SUSP# @@ -101,11 +101,11 @@ /* SUSCFG bits */ #define SUSMOD (1<<0) /* enable/disable suspend modulation */ -/* the belows support only with cs5530 (after rev.1.2)/cs5530A */ +/* the below is supported only with cs5530 (after rev.1.2)/cs5530A */ #define SMISPDUP (1<<1) /* select how SMI re-enable suspend modulation: */ /* IRQTC timer or read SMI speedup disable reg.(F1BAR[08-09h]) */ #define SUSCFG (1<<2) /* enable powering down a GXLV processor. "Special 3Volt Suspend" mode */ -/* the belows support only with cs5530A */ +/* the below is supported only with cs5530A */ #define PWRSVE_ISA (1<<3) /* stop ISA clock */ #define PWRSVE (1<<4) /* active idle */ diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k6.c b/arch/x86/kernel/cpu/cpufreq/powernow-k6.c index 42405b4e34ed..eb9b62b0830c 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k6.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k6.c @@ -1,6 +1,6 @@ /* * This file was based upon code in Powertweak Linux (http://powertweak.sf.net) - * (C) 2000-2003 Dave Jones, Arjan van de Ven, Janne Pänkälä, Dominik Brodowski. + * (C) 2000-2003 Dave Jones, Arjan van de Ven, Janne Pänkälä, Dominik Brodowski. * * Licensed under the terms of the GNU GPL License version 2. * diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c index c06ac680c9ca..9c36a53676b7 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c @@ -168,7 +168,7 @@ static void count_off_irt(struct powernow_k8_data *data) return; } -/* the voltage stabalization time */ +/* the voltage stabilization time */ static void count_off_vst(struct powernow_k8_data *data) { udelay(data->vstable * VST_UNITS_20US); diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h index b06c812208ca..7c4f6e0faed4 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h @@ -148,10 +148,10 @@ struct powernow_k8_data { #define PLL_LOCK_CONVERSION (1000/5) /* ms to ns, then divide by clock period */ #define MAXIMUM_VID_STEPS 1 /* Current cpus only allow a single step of 25mV */ -#define VST_UNITS_20US 20 /* Voltage Stabalization Time is in units of 20us */ +#define VST_UNITS_20US 20 /* Voltage Stabilization Time is in units of 20us */ /* - * Most values of interest are enocoded in a single field of the _PSS + * Most values of interest are encoded in a single field of the _PSS * entries: the "control" value. */ diff --git a/arch/x86/kernel/cpu/cyrix.c b/arch/x86/kernel/cpu/cyrix.c index 122d2d75aa9f..88d66fb8411d 100644 --- a/arch/x86/kernel/cpu/cyrix.c +++ b/arch/x86/kernel/cpu/cyrix.c @@ -93,7 +93,7 @@ static void __cpuinit check_cx686_slop(struct cpuinfo_x86 *c) local_irq_save(flags); ccr3 = getCx86(CX86_CCR3); - setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */ + setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */ ccr5 = getCx86(CX86_CCR5); if (ccr5 & 2) setCx86(CX86_CCR5, ccr5 & 0xfd); /* reset SLOP */ @@ -115,9 +115,9 @@ static void __cpuinit set_cx86_reorder(void) printk(KERN_INFO "Enable Memory access reorder on Cyrix/NSC processor.\n"); ccr3 = getCx86(CX86_CCR3); - setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */ + setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */ - /* Load/Store Serialize to mem access disable (=reorder it) */ + /* Load/Store Serialize to mem access disable (=reorder it) */ setCx86(CX86_PCR0, getCx86(CX86_PCR0) & ~0x80); /* set load/store serialize from 1GB to 4GB */ ccr3 |= 0xe0; @@ -146,7 +146,7 @@ static void __cpuinit set_cx86_inc(void) printk(KERN_INFO "Enable Incrementor on Cyrix/NSC processor.\n"); ccr3 = getCx86(CX86_CCR3); - setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */ + setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */ /* PCR1 -- Performance Control */ /* Incrementor on, whatever that is */ setCx86(CX86_PCR1, getCx86(CX86_PCR1) | 0x02); @@ -256,7 +256,7 @@ static void __cpuinit init_cyrix(struct cpuinfo_x86 *c) u32 vendor, device; /* It isn't really a PCI quirk directly, but the cure is the same. The MediaGX has deep magic SMM stuff that handles the - SB emulation. It thows away the fifo on disable_dma() which + SB emulation. It throws away the fifo on disable_dma() which is wrong and ruins the audio. Bug2: VSA1 has a wrap bug so that using maximum sized DMA diff --git a/arch/x86/kernel/cpu/mtrr/cyrix.c b/arch/x86/kernel/cpu/mtrr/cyrix.c index 2287d4863a8a..9964be3de2b7 100644 --- a/arch/x86/kernel/cpu/mtrr/cyrix.c +++ b/arch/x86/kernel/cpu/mtrr/cyrix.c @@ -147,10 +147,10 @@ static void prepare_set(void) write_cr0(cr0); wbinvd(); - /* Cyrix ARRs - everything else were excluded at the top */ + /* Cyrix ARRs - everything else was excluded at the top */ ccr3 = getCx86(CX86_CCR3); - /* Cyrix ARRs - everything else were excluded at the top */ + /* Cyrix ARRs - everything else was excluded at the top */ setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); } diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c index 56f64e34829f..992f08dfbb6c 100644 --- a/arch/x86/kernel/cpu/mtrr/generic.c +++ b/arch/x86/kernel/cpu/mtrr/generic.c @@ -182,7 +182,7 @@ static inline void k8_enable_fixed_iorrs(void) /** * Checks and updates an fixed-range MTRR if it differs from the value it - * should have. If K8 extenstions are wanted, update the K8 SYSCFG MSR also. + * should have. If K8 extentions are wanted, update the K8 SYSCFG MSR also. * see AMD publication no. 24593, chapter 7.8.1, page 233 for more information * \param msr MSR address of the MTTR which should be checked and updated * \param changed pointer which indicates whether the MTRR needed to be changed diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c index 5e4be30ff903..9abbdf7562c5 100644 --- a/arch/x86/kernel/cpu/mtrr/main.c +++ b/arch/x86/kernel/cpu/mtrr/main.c @@ -748,7 +748,7 @@ static int __init mtrr_init_finialize(void) if (use_intel()) mtrr_state_warn(); else { - /* The CPUs haven't MTRR and seemes not support SMP. They have + /* The CPUs haven't MTRR and seem to not support SMP. They have * specific drivers, we use a tricky method to support * suspend/resume for them. * TBD: is there any system with such CPU which supports diff --git a/arch/x86/kernel/e820_32.c b/arch/x86/kernel/e820_32.c index d58039e8de74..58fd54eb5577 100644 --- a/arch/x86/kernel/e820_32.c +++ b/arch/x86/kernel/e820_32.c @@ -706,7 +706,7 @@ void __init e820_register_memory(void) int i; /* - * Search for the bigest gap in the low 32 bits of the e820 + * Search for the biggest gap in the low 32 bits of the e820 * memory space. */ last = 0x100000000ull; diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c index 22d8f00c80dc..53303f2e5475 100644 --- a/arch/x86/kernel/hpet.c +++ b/arch/x86/kernel/hpet.c @@ -353,7 +353,7 @@ static int hpet_clocksource_register(void) * * hpet period is in femto seconds per cycle * so we need to convert this to ns/cyc units - * aproximated by mult/2^shift + * approximated by mult/2^shift * * fsec/cyc * 1nsec/1000000fsec = nsec/cyc = mult/2^shift * fsec/cyc * 1ns/1000000fsec * 2^shift = mult diff --git a/arch/x86/kernel/i8253.c b/arch/x86/kernel/i8253.c index 5cc8841ca2c6..a42c80745325 100644 --- a/arch/x86/kernel/i8253.c +++ b/arch/x86/kernel/i8253.c @@ -86,7 +86,7 @@ static int pit_next_event(unsigned long delta, struct clock_event_device *evt) * On UP the PIT can serve all of the possible timer functions. On SMP systems * it can be solely used for the global tick. * - * The profiling and update capabilites are switched off once the local apic is + * The profiling and update capabilities are switched off once the local apic is * registered. This mechanism replaces the previous #ifdef LOCAL_APIC - * !using_apic_timer decisions in do_timer_interrupt_hook() */ diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c index 0c55e9d86f69..f35c6eb33da9 100644 --- a/arch/x86/kernel/io_apic_32.c +++ b/arch/x86/kernel/io_apic_32.c @@ -584,7 +584,7 @@ tryanotherirq: imbalance = move_this_load; - /* For physical_balance case, we accumlated both load + /* For physical_balance case, we accumulated both load * values in the one of the siblings cpu_irq[], * to use the same code for physical and logical processors * as much as possible. @@ -2475,7 +2475,7 @@ void destroy_irq(unsigned int irq) } /* - * MSI mesage composition + * MSI message composition */ #ifdef CONFIG_PCI_MSI static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_msg *msg) diff --git a/arch/x86/kernel/io_apic_64.c b/arch/x86/kernel/io_apic_64.c index 1c2c7bf6a9d3..b3c2d268d708 100644 --- a/arch/x86/kernel/io_apic_64.c +++ b/arch/x86/kernel/io_apic_64.c @@ -1770,7 +1770,7 @@ __setup("no_timer_check", notimercheck); /* * - * IRQ's that are handled by the PIC in the MPS IOAPIC case. + * IRQs that are handled by the PIC in the MPS IOAPIC case. * - IRQ2 is the cascade IRQ, and cannot be a io-apic IRQ. * Linux doesn't really care, as it's not actually used * for any interrupt handling anyway. @@ -1921,7 +1921,7 @@ void destroy_irq(unsigned int irq) } /* - * MSI mesage composition + * MSI message composition */ #ifdef CONFIG_PCI_MSI static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_msg *msg) diff --git a/arch/x86/kernel/mce_64.c b/arch/x86/kernel/mce_64.c index 2cf20de5beca..07bbfe7aa7f7 100644 --- a/arch/x86/kernel/mce_64.c +++ b/arch/x86/kernel/mce_64.c @@ -320,7 +320,7 @@ void do_machine_check(struct pt_regs * regs, long error_code) #ifdef CONFIG_X86_MCE_INTEL /*** * mce_log_therm_throt_event - Logs the thermal throttling event to mcelog - * @cpu: The CPU on which the event occured. + * @cpu: The CPU on which the event occurred. * @status: Event status information * * This function should be called by the thermal interrupt after the @@ -688,7 +688,7 @@ static int __init mcheck_disable(char *str) return 1; } -/* mce=off disables machine check. Note you can reenable it later +/* mce=off disables machine check. Note you can re-enable it later using sysfs. mce=TOLERANCELEVEL (number, see above) mce=bootlog Log MCEs from before booting. Disabled by default on AMD. diff --git a/arch/x86/kernel/mpparse_32.c b/arch/x86/kernel/mpparse_32.c index 13abb4ebfb79..7a05a7f6099a 100644 --- a/arch/x86/kernel/mpparse_32.c +++ b/arch/x86/kernel/mpparse_32.c @@ -1001,7 +1001,7 @@ void __init mp_config_acpi_legacy_irqs (void) /* * Use the default configuration for the IRQs 0-15. Unless - * overriden by (MADT) interrupt source override entries. + * overridden by (MADT) interrupt source override entries. */ for (i = 0; i < 16; i++) { int idx; diff --git a/arch/x86/kernel/ptrace_32.c b/arch/x86/kernel/ptrace_32.c index 99102ec5fade..ff5431cc03ee 100644 --- a/arch/x86/kernel/ptrace_32.c +++ b/arch/x86/kernel/ptrace_32.c @@ -632,7 +632,7 @@ void send_sigtrap(struct task_struct *tsk, struct pt_regs *regs, int error_code) /* User-mode eip? */ info.si_addr = user_mode_vm(regs) ? (void __user *) regs->eip : NULL; - /* Send us the fakey SIGTRAP */ + /* Send us the fake SIGTRAP */ force_sig_info(SIGTRAP, &info, tsk); } diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c index e4f199124761..ba2e165a8a0f 100644 --- a/arch/x86/kernel/setup_32.c +++ b/arch/x86/kernel/setup_32.c @@ -624,7 +624,7 @@ void __init setup_arch(char **cmdline_p) /* * NOTE: before this point _nobody_ is allowed to allocate * any memory using the bootmem allocator. Although the - * alloctor is now initialised only the first 8Mb of the kernel + * allocator is now initialised only the first 8Mb of the kernel * virtual address space has been mapped. All allocations before * paging_init() has completed must use the alloc_bootmem_low_pages() * variant (which allocates DMA'able memory) and care must be taken diff --git a/arch/x86/kernel/signal_32.c b/arch/x86/kernel/signal_32.c index 6dc394b87255..9bdd83022f5f 100644 --- a/arch/x86/kernel/signal_32.c +++ b/arch/x86/kernel/signal_32.c @@ -594,7 +594,7 @@ static void fastcall do_signal(struct pt_regs *regs) signr = get_signal_to_deliver(&info, &ka, regs, NULL); if (signr > 0) { - /* Reenable any watchpoints before delivering the + /* Re-enable any watchpoints before delivering the * signal to user space. The processor register will * have been cleared if the watchpoint triggered * inside the kernel. diff --git a/arch/x86/kernel/signal_64.c b/arch/x86/kernel/signal_64.c index 683802bec419..ab086b0357fc 100644 --- a/arch/x86/kernel/signal_64.c +++ b/arch/x86/kernel/signal_64.c @@ -410,7 +410,7 @@ static void do_signal(struct pt_regs *regs) signr = get_signal_to_deliver(&info, &ka, regs, NULL); if (signr > 0) { - /* Reenable any watchpoints before delivering the + /* Re-enable any watchpoints before delivering the * signal to user space. The processor register will * have been cleared if the watchpoint triggered * inside the kernel. diff --git a/arch/x86/kernel/smp_32.c b/arch/x86/kernel/smp_32.c index 2621ca3b2e4d..f32115308399 100644 --- a/arch/x86/kernel/smp_32.c +++ b/arch/x86/kernel/smp_32.c @@ -69,7 +69,7 @@ * * B stepping CPUs may hang. There are hardware work arounds * for this. We warn about it in case your board doesn't have the work - * arounds. Basically thats so I can tell anyone with a B stepping + * arounds. Basically that's so I can tell anyone with a B stepping * CPU and SMP problems "tough". * * Specific items [From Pentium Processor Specification Update] @@ -273,7 +273,7 @@ void leave_mm(unsigned long cpu) * 1a1) cpu_clear(cpu, old_mm->cpu_vm_mask); * Stop ipi delivery for the old mm. This is not synchronized with * the other cpus, but smp_invalidate_interrupt ignore flush ipis - * for the wrong mm, and in the worst case we perform a superflous + * for the wrong mm, and in the worst case we perform a superfluous * tlb flush. * 1a2) set cpu_tlbstate to TLBSTATE_OK * Now the smp_invalidate_interrupt won't call leave_mm if cpu0 diff --git a/arch/x86/kernel/smpboot_32.c b/arch/x86/kernel/smpboot_32.c index 7b8fdfa169dd..ef0f34ede1ab 100644 --- a/arch/x86/kernel/smpboot_32.c +++ b/arch/x86/kernel/smpboot_32.c @@ -421,7 +421,7 @@ static void __cpuinit start_secondary(void *unused) /* * We need to hold call_lock, so there is no inconsistency * between the time smp_call_function() determines number of - * IPI receipients, and the time when the determination is made + * IPI recipients, and the time when the determination is made * for which cpus receive the IPI. Holding this * lock helps us to not include this cpu in a currently in progress * smp_call_function(). diff --git a/arch/x86/kernel/smpboot_64.c b/arch/x86/kernel/smpboot_64.c index fd1fff6a35a2..b7e768dd87c9 100644 --- a/arch/x86/kernel/smpboot_64.c +++ b/arch/x86/kernel/smpboot_64.c @@ -351,7 +351,7 @@ void __cpuinit start_secondary(void) /* * We need to hold call_lock, so there is no inconsistency * between the time smp_call_function() determines number of - * IPI receipients, and the time when the determination is made + * IPI recipients, and the time when the determination is made * for which cpus receive the IPI in genapic_flat.c. Holding this * lock helps us to not include this cpu in a currently in progress * smp_call_function(). diff --git a/arch/x86/kernel/summit_32.c b/arch/x86/kernel/summit_32.c index 91c7acc8d999..72f463401592 100644 --- a/arch/x86/kernel/summit_32.c +++ b/arch/x86/kernel/summit_32.c @@ -64,7 +64,7 @@ static int __init setup_pci_node_map_for_wpeg(int wpeg_num, int last_bus) switch (rio_devs[wpeg_num]->type){ case CompatWPEG: - /* The Compatability Winnipeg controls the 2 legacy buses, + /* The Compatibility Winnipeg controls the 2 legacy buses, * the 66MHz PCI bus [2 slots] and the 2 "extra" buses in case * a PCI-PCI bridge card is used in either slot: total 5 buses. */ diff --git a/arch/x86/kernel/suspend_64.c b/arch/x86/kernel/suspend_64.c index 622bb0268284..bc9f59c246fd 100644 --- a/arch/x86/kernel/suspend_64.c +++ b/arch/x86/kernel/suspend_64.c @@ -124,7 +124,7 @@ void fix_processor_context(void) int cpu = smp_processor_id(); struct tss_struct *t = &per_cpu(init_tss, cpu); - set_tss_desc(cpu,t); /* This just modifies memory; should not be neccessary. But... This is neccessary, because 386 hardware has concept of busy TSS or some similar stupidity. */ + set_tss_desc(cpu,t); /* This just modifies memory; should not be necessary. But... This is necessary, because 386 hardware has concept of busy TSS or some similar stupidity. */ cpu_gdt(cpu)[GDT_ENTRY_TSS].type = 9; diff --git a/arch/x86/kernel/traps_64.c b/arch/x86/kernel/traps_64.c index df690c3fa458..d0c2bc7ab2ec 100644 --- a/arch/x86/kernel/traps_64.c +++ b/arch/x86/kernel/traps_64.c @@ -201,7 +201,7 @@ static unsigned long *in_exception_stack(unsigned cpu, unsigned long stack, #define MSG(txt) ops->warning(data, txt) /* - * x86-64 can have upto three kernel stacks: + * x86-64 can have up to three kernel stacks: * process stack * interrupt stack * severe exception (double fault, nmi, stack fault, debug, mce) hardware stack diff --git a/arch/x86/kernel/tsc_32.c b/arch/x86/kernel/tsc_32.c index b8a7cf671432..d78444c788a3 100644 --- a/arch/x86/kernel/tsc_32.c +++ b/arch/x86/kernel/tsc_32.c @@ -59,7 +59,7 @@ int check_tsc_unstable(void) } EXPORT_SYMBOL_GPL(check_tsc_unstable); -/* Accellerators for sched_clock() +/* Accelerators for sched_clock() * convert from cycles(64bits) => nanoseconds (64bits) * basic equation: * ns = cycles / (freq / ns_per_sec) @@ -74,7 +74,7 @@ EXPORT_SYMBOL_GPL(check_tsc_unstable); * And since SC is a constant power of two, we can convert the div * into a shift. * - * We can use khz divisor instead of mhz to keep a better percision, since + * We can use khz divisor instead of mhz to keep a better precision, since * cyc2ns_scale is limited to 10^6 * 2^10, which fits in 32 bits. * (mathieu.desnoyers@polymtl.ca) * diff --git a/arch/x86/kernel/vsyscall_64.c b/arch/x86/kernel/vsyscall_64.c index 78f2250963ae..ad4005c6d4a1 100644 --- a/arch/x86/kernel/vsyscall_64.c +++ b/arch/x86/kernel/vsyscall_64.c @@ -53,7 +53,7 @@ /* * vsyscall_gtod_data contains data that is : * - readonly from vsyscalls - * - writen by timer interrupt or systcl (/proc/sys/kernel/vsyscall64) + * - written by timer interrupt or systcl (/proc/sys/kernel/vsyscall64) * Try to keep this structure as small as possible to avoid cache line ping pongs */ int __vgetcpu_mode __section_vgetcpu_mode; diff --git a/arch/x86/mach-default/setup.c b/arch/x86/mach-default/setup.c index 3f08010f3517..0c28a071824c 100644 --- a/arch/x86/mach-default/setup.c +++ b/arch/x86/mach-default/setup.c @@ -108,7 +108,7 @@ void __init time_init_hook(void) * mca_nmi_hook - hook into MCA specific NMI chain * * Description: - * The MCA (Microchannel Arcitecture) has an NMI chain for NMI sources + * The MCA (Microchannel Architecture) has an NMI chain for NMI sources * along the MCA bus. Use this to hook into that chain if you will need * it. **/ @@ -131,7 +131,7 @@ static __init int no_ipi_broadcast(char *str) return 1; } -__setup("no_ipi_broadcast", no_ipi_broadcast); +__setup("no_ipi_broadcast=", no_ipi_broadcast); static int __init print_ipi_mode(void) { diff --git a/arch/x86/mach-generic/default.c b/arch/x86/mach-generic/default.c index 8685208d8512..1af0cc7648f0 100644 --- a/arch/x86/mach-generic/default.c +++ b/arch/x86/mach-generic/default.c @@ -1,5 +1,5 @@ /* - * Default generic APIC driver. This handles upto 8 CPUs. + * Default generic APIC driver. This handles up to 8 CPUs. */ #define APIC_DEFINITION 1 #include <linux/threads.h> diff --git a/arch/x86/mach-generic/probe.c b/arch/x86/mach-generic/probe.c index 4121d1551800..f410d3cb5659 100644 --- a/arch/x86/mach-generic/probe.c +++ b/arch/x86/mach-generic/probe.c @@ -56,7 +56,7 @@ void __init generic_bigsmp_probe(void) /* * This routine is used to switch to bigsmp mode when * - There is no apic= option specified by the user - * - generic_apic_probe() has choosen apic_default as the sub_arch + * - generic_apic_probe() has chosen apic_default as the sub_arch * - we find more than 8 CPUs in acpi LAPIC listing with xAPIC support */ diff --git a/arch/x86/mach-voyager/voyager_smp.c b/arch/x86/mach-voyager/voyager_smp.c index f93a730b44d0..361ac5107b33 100644 --- a/arch/x86/mach-voyager/voyager_smp.c +++ b/arch/x86/mach-voyager/voyager_smp.c @@ -389,7 +389,7 @@ find_smp_config(void) /* The boot CPU must be extended */ voyager_extended_vic_processors = 1<<boot_cpu_id; - /* initially, all of the first 8 cpu's can boot */ + /* initially, all of the first 8 CPUs can boot */ voyager_allowed_boot_processors = 0xff; /* set up everything for just this CPU, we can alter * this as we start the other CPUs later */ @@ -1010,7 +1010,7 @@ static struct call_data_struct * call_data; /* execute a thread on a new CPU. The function to be called must be * previously set up. This is used to schedule a function for - * execution on all CPU's - set up the function then broadcast a + * execution on all CPUs - set up the function then broadcast a * function_interrupt CPI to come here on each CPU */ static void smp_call_function_interrupt(void) @@ -1095,7 +1095,7 @@ voyager_smp_call_function_mask (cpumask_t cpumask, * CPI here. We don't use this actually for counting so losing * ticks doesn't matter * - * FIXME: For those CPU's which actually have a local APIC, we could + * FIXME: For those CPUs which actually have a local APIC, we could * try to use it to trigger this interrupt instead of having to * broadcast the timer tick. Unfortunately, all my pentium DYADs have * no local APIC, so I can't do this @@ -1287,7 +1287,7 @@ smp_local_timer_interrupt(void) /* * We take the 'long' return path, and there every subsystem - * grabs the apropriate locks (kernel lock/ irq lock). + * grabs the appropriate locks (kernel lock/ irq lock). * * we might want to decouple profiling from the 'long path', * and do the profiling totally in assembly. @@ -1759,7 +1759,7 @@ set_vic_irq_affinity(unsigned int irq, cpumask_t mask) real_mask = cpus_addr(mask)[0] & voyager_extended_vic_processors; if(cpus_addr(mask)[0] == 0) - /* can't have no cpu's to accept the interrupt -- extremely + /* can't have no CPUs to accept the interrupt -- extremely * bad things will happen */ return; @@ -1791,7 +1791,7 @@ set_vic_irq_affinity(unsigned int irq, cpumask_t mask) } /* this is magic, we now have the correct affinity maps, so * enable the interrupt. This will send an enable CPI to - * those cpu's who need to enable it in their local masks, + * those CPUs who need to enable it in their local masks, * causing them to correct for the new affinity . If the * interrupt is currently globally disabled, it will simply be * disabled again as it comes in (voyager lazy disable). If diff --git a/arch/x86/mach-voyager/voyager_thread.c b/arch/x86/mach-voyager/voyager_thread.c index f9d595338159..50f9366c411e 100644 --- a/arch/x86/mach-voyager/voyager_thread.c +++ b/arch/x86/mach-voyager/voyager_thread.c @@ -64,7 +64,7 @@ check_from_kernel(void) { if(voyager_status.switch_off) { - /* FIXME: This should be configureable via proc */ + /* FIXME: This should be configurable via proc */ execute("umask 600; echo 0 > /etc/initrunlvl; kill -HUP 1"); } else if(voyager_status.power_fail) { VDEBUG(("Voyager daemon detected AC power failure\n")); diff --git a/arch/x86/mm/boot_ioremap_32.c b/arch/x86/mm/boot_ioremap_32.c index 4de95a17a7d4..f14da2a53ece 100644 --- a/arch/x86/mm/boot_ioremap_32.c +++ b/arch/x86/mm/boot_ioremap_32.c @@ -10,7 +10,7 @@ /* * We need to use the 2-level pagetable functions, but CONFIG_X86_PAE - * keeps that from happenning. If anyone has a better way, I'm listening. + * keeps that from happening. If anyone has a better way, I'm listening. * * boot_pte_t is defined only if this all works correctly */ diff --git a/arch/x86/mm/discontig_32.c b/arch/x86/mm/discontig_32.c index 13893772cc48..fe608a45ffb6 100644 --- a/arch/x86/mm/discontig_32.c +++ b/arch/x86/mm/discontig_32.c @@ -273,7 +273,7 @@ unsigned long __init setup_memory(void) * When mapping a NUMA machine we allocate the node_mem_map arrays * from node local memory. They are then mapped directly into KVA * between zone normal and vmalloc space. Calculate the size of - * this space and use it to adjust the boundry between ZONE_NORMAL + * this space and use it to adjust the boundary between ZONE_NORMAL * and ZONE_HIGHMEM. */ find_max_pfn(); diff --git a/arch/x86/mm/fault_32.c b/arch/x86/mm/fault_32.c index b695d70e998c..503dfc05111b 100644 --- a/arch/x86/mm/fault_32.c +++ b/arch/x86/mm/fault_32.c @@ -354,7 +354,7 @@ fastcall void __kprobes do_page_fault(struct pt_regs *regs, /* When running in the kernel we expect faults to occur only to * addresses in user space. All other faults represent errors in the - * kernel and should generate an OOPS. Unfortunatly, in the case of an + * kernel and should generate an OOPS. Unfortunately, in the case of an * erroneous fault occurring in a code path which already holds mmap_sem * we will deadlock attempting to validate the fault against the * address space. Luckily the kernel only validly references user @@ -362,7 +362,7 @@ fastcall void __kprobes do_page_fault(struct pt_regs *regs, * exceptions table. * * As the vast majority of faults will be valid we will only perform - * the source reference check when there is a possibilty of a deadlock. + * the source reference check when there is a possibility of a deadlock. * Attempt to lock the address space, if we cannot we then validate the * source. If this is invalid we can skip the address space check, * thus avoiding the deadlock. diff --git a/arch/x86/mm/fault_64.c b/arch/x86/mm/fault_64.c index 00be7f0a71b2..644b4f7ece10 100644 --- a/arch/x86/mm/fault_64.c +++ b/arch/x86/mm/fault_64.c @@ -373,7 +373,7 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, again: /* When running in the kernel we expect faults to occur only to * addresses in user space. All other faults represent errors in the - * kernel and should generate an OOPS. Unfortunatly, in the case of an + * kernel and should generate an OOPS. Unfortunately, in the case of an * erroneous fault occurring in a code path which already holds mmap_sem * we will deadlock attempting to validate the fault against the * address space. Luckily the kernel only validly references user @@ -381,7 +381,7 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, * exceptions table. * * As the vast majority of faults will be valid we will only perform - * the source reference check when there is a possibilty of a deadlock. + * the source reference check when there is a possibility of a deadlock. * Attempt to lock the address space, if we cannot we then validate the * source. If this is invalid we can skip the address space check, * thus avoiding the deadlock. diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c index 56089ccc3949..ea85172fc0cc 100644 --- a/arch/x86/mm/srat_64.c +++ b/arch/x86/mm/srat_64.c @@ -218,7 +218,7 @@ static inline int save_add_info(void) {return 0;} /* * Update nodes_add and decide if to include add are in the zone. * Both SPARSE and RESERVE need nodes_add infomation. - * This code supports one contigious hot add area per node. + * This code supports one contiguous hot add area per node. */ static int reserve_hotadd(int node, unsigned long start, unsigned long end) { diff --git a/arch/x86/oprofile/op_x86_model.h b/arch/x86/oprofile/op_x86_model.h index abb1aa95b979..45b605fa71d0 100644 --- a/arch/x86/oprofile/op_x86_model.h +++ b/arch/x86/oprofile/op_x86_model.h @@ -29,7 +29,7 @@ struct op_msrs { struct pt_regs; /* The model vtable abstracts the differences between - * various x86 CPU model's perfctr support. + * various x86 CPU models' perfctr support. */ struct op_x86_model_spec { unsigned int const num_counters; diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c index c52150fdf82b..88d8f5c0ecb5 100644 --- a/arch/x86/pci/irq.c +++ b/arch/x86/pci/irq.c @@ -169,7 +169,7 @@ void eisa_set_level_irq(unsigned int irq) } /* - * Common IRQ routing practice: nybbles in config space, + * Common IRQ routing practice: nibbles in config space, * offset by some magic constant. */ static unsigned int read_config_nybble(struct pci_dev *router, unsigned offset, unsigned nr) @@ -585,7 +585,7 @@ static __init int via_router_probe(struct irq_router *r, /* FIXME: We should move some of the quirk fixup stuff here */ /* - * work arounds for some buggy BIOSes + * workarounds for some buggy BIOSes */ if (device == PCI_DEVICE_ID_VIA_82C586_0) { switch(router->device) { diff --git a/arch/xtensa/platform-iss/network.c b/arch/xtensa/platform-iss/network.c index f09962fa98c0..b61fb36674e7 100644 --- a/arch/xtensa/platform-iss/network.c +++ b/arch/xtensa/platform-iss/network.c @@ -798,7 +798,7 @@ static int iss_net_setup(char *str) #undef ERR -__setup("eth", iss_net_setup); +__setup("eth=", iss_net_setup); /* * Initialize all ISS Ethernet devices previously registered in iss_net_setup. |