diff options
Diffstat (limited to 'drivers/ata/libahci_platform.c')
-rw-r--r-- | drivers/ata/libahci_platform.c | 218 |
1 files changed, 164 insertions, 54 deletions
diff --git a/drivers/ata/libahci_platform.c b/drivers/ata/libahci_platform.c index 32495ae96567..ddf17e2d266c 100644 --- a/drivers/ata/libahci_platform.c +++ b/drivers/ata/libahci_platform.c @@ -94,31 +94,41 @@ void ahci_platform_disable_phys(struct ahci_host_priv *hpriv) EXPORT_SYMBOL_GPL(ahci_platform_disable_phys); /** - * ahci_platform_enable_clks - Enable platform clocks + * ahci_platform_find_clk - Find platform clock * @hpriv: host private area to store config values + * @con_id: clock connection ID * - * This function enables all the clks found in hpriv->clks, starting at - * index 0. If any clk fails to enable it disables all the clks already - * enabled in reverse order, and then returns an error. + * This function returns a pointer to the clock descriptor of the clock with + * the passed ID. * * RETURNS: - * 0 on success otherwise a negative error code + * Pointer to the clock descriptor on success otherwise NULL */ -int ahci_platform_enable_clks(struct ahci_host_priv *hpriv) +struct clk *ahci_platform_find_clk(struct ahci_host_priv *hpriv, const char *con_id) { - int c, rc; + int i; - for (c = 0; c < AHCI_MAX_CLKS && hpriv->clks[c]; c++) { - rc = clk_prepare_enable(hpriv->clks[c]); - if (rc) - goto disable_unprepare_clk; + for (i = 0; i < hpriv->n_clks; i++) { + if (!strcmp(hpriv->clks[i].id, con_id)) + return hpriv->clks[i].clk; } - return 0; -disable_unprepare_clk: - while (--c >= 0) - clk_disable_unprepare(hpriv->clks[c]); - return rc; + return NULL; +} +EXPORT_SYMBOL_GPL(ahci_platform_find_clk); + +/** + * ahci_platform_enable_clks - Enable platform clocks + * @hpriv: host private area to store config values + * + * This function enables all the clks found for the AHCI device. + * + * RETURNS: + * 0 on success otherwise a negative error code + */ +int ahci_platform_enable_clks(struct ahci_host_priv *hpriv) +{ + return clk_bulk_prepare_enable(hpriv->n_clks, hpriv->clks); } EXPORT_SYMBOL_GPL(ahci_platform_enable_clks); @@ -126,20 +136,55 @@ EXPORT_SYMBOL_GPL(ahci_platform_enable_clks); * ahci_platform_disable_clks - Disable platform clocks * @hpriv: host private area to store config values * - * This function disables all the clks found in hpriv->clks, in reverse - * order of ahci_platform_enable_clks (starting at the end of the array). + * This function disables all the clocks enabled before + * (bulk-clocks-disable function is supposed to do that in reverse + * from the enabling procedure order). */ void ahci_platform_disable_clks(struct ahci_host_priv *hpriv) { - int c; - - for (c = AHCI_MAX_CLKS - 1; c >= 0; c--) - if (hpriv->clks[c]) - clk_disable_unprepare(hpriv->clks[c]); + clk_bulk_disable_unprepare(hpriv->n_clks, hpriv->clks); } EXPORT_SYMBOL_GPL(ahci_platform_disable_clks); /** + * ahci_platform_deassert_rsts - Deassert/trigger platform resets + * @hpriv: host private area to store config values + * + * This function deasserts or triggers all the reset lines found for + * the AHCI device. + * + * RETURNS: + * 0 on success otherwise a negative error code + */ +int ahci_platform_deassert_rsts(struct ahci_host_priv *hpriv) +{ + if (hpriv->f_rsts & AHCI_PLATFORM_RST_TRIGGER) + return reset_control_reset(hpriv->rsts); + + return reset_control_deassert(hpriv->rsts); +} +EXPORT_SYMBOL_GPL(ahci_platform_deassert_rsts); + +/** + * ahci_platform_assert_rsts - Assert/rearm platform resets + * @hpriv: host private area to store config values + * + * This function asserts or rearms (for self-deasserting resets) all + * the reset controls found for the AHCI device. + * + * RETURNS: + * 0 on success otherwise a negative error code + */ +int ahci_platform_assert_rsts(struct ahci_host_priv *hpriv) +{ + if (hpriv->f_rsts & AHCI_PLATFORM_RST_TRIGGER) + return reset_control_rearm(hpriv->rsts); + + return reset_control_assert(hpriv->rsts); +} +EXPORT_SYMBOL_GPL(ahci_platform_assert_rsts); + +/** * ahci_platform_enable_regulators - Enable regulators * @hpriv: host private area to store config values * @@ -236,18 +281,18 @@ int ahci_platform_enable_resources(struct ahci_host_priv *hpriv) if (rc) goto disable_regulator; - rc = reset_control_deassert(hpriv->rsts); + rc = ahci_platform_deassert_rsts(hpriv); if (rc) goto disable_clks; rc = ahci_platform_enable_phys(hpriv); if (rc) - goto disable_resets; + goto disable_rsts; return 0; -disable_resets: - reset_control_assert(hpriv->rsts); +disable_rsts: + ahci_platform_assert_rsts(hpriv); disable_clks: ahci_platform_disable_clks(hpriv); @@ -274,7 +319,7 @@ void ahci_platform_disable_resources(struct ahci_host_priv *hpriv) { ahci_platform_disable_phys(hpriv); - reset_control_assert(hpriv->rsts); + ahci_platform_assert_rsts(hpriv); ahci_platform_disable_clks(hpriv); @@ -292,8 +337,6 @@ static void ahci_platform_put_resources(struct device *dev, void *res) pm_runtime_disable(dev); } - for (c = 0; c < AHCI_MAX_CLKS && hpriv->clks[c]; c++) - clk_put(hpriv->clks[c]); /* * The regulators are tied to child node device and not to the * SATA device itself. So we can't use devm for automatically @@ -363,6 +406,34 @@ static int ahci_platform_get_regulator(struct ahci_host_priv *hpriv, u32 port, return rc; } +static int ahci_platform_get_firmware(struct ahci_host_priv *hpriv, + struct device *dev) +{ + struct device_node *child; + u32 port; + + if (!of_property_read_u32(dev->of_node, "hba-cap", &hpriv->saved_cap)) + hpriv->saved_cap &= (HOST_CAP_SSS | HOST_CAP_MPS); + + of_property_read_u32(dev->of_node, + "ports-implemented", &hpriv->saved_port_map); + + for_each_child_of_node(dev->of_node, child) { + if (!of_device_is_available(child)) + continue; + + if (of_property_read_u32(child, "reg", &port)) { + of_node_put(child); + return -EINVAL; + } + + if (!of_property_read_u32(child, "hba-port-cap", &hpriv->saved_port_cap[port])) + hpriv->saved_port_cap[port] &= PORT_CMD_CAP; + } + + return 0; +} + /** * ahci_platform_get_resources - Get platform resources * @pdev: platform device to get resources for @@ -374,8 +445,8 @@ static int ahci_platform_get_regulator(struct ahci_host_priv *hpriv, u32 port, * 1) mmio registers (IORESOURCE_MEM 0, mandatory) * 2) regulator for controlling the targets power (optional) * regulator for controlling the AHCI controller (optional) - * 3) 0 - AHCI_MAX_CLKS clocks, as specified in the devs devicetree node, - * or for non devicetree enabled platforms a single clock + * 3) all clocks specified in the devicetree node, or a single + * clock for non-OF platforms (optional) * 4) resets, if flags has AHCI_PLATFORM_GET_RESETS (optional) * 5) phys (optional) * @@ -385,11 +456,10 @@ static int ahci_platform_get_regulator(struct ahci_host_priv *hpriv, u32 port, struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev, unsigned int flags) { + int child_nodes, rc = -ENOMEM, enabled_ports = 0; struct device *dev = &pdev->dev; struct ahci_host_priv *hpriv; - struct clk *clk; struct device_node *child; - int i, enabled_ports = 0, rc = -ENOMEM, child_nodes; u32 mask_port_map = 0; if (!devres_open_group(dev, NULL, GFP_KERNEL)) @@ -402,32 +472,51 @@ struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev, devres_add(dev, hpriv); - hpriv->mmio = devm_ioremap_resource(dev, - platform_get_resource(pdev, IORESOURCE_MEM, 0)); + /* + * If the DT provided an "ahci" named resource, use it. Otherwise, + * fallback to using the default first resource for the device node. + */ + if (platform_get_resource_byname(pdev, IORESOURCE_MEM, "ahci")) + hpriv->mmio = devm_platform_ioremap_resource_byname(pdev, "ahci"); + else + hpriv->mmio = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(hpriv->mmio)) { rc = PTR_ERR(hpriv->mmio); goto err_out; } - for (i = 0; i < AHCI_MAX_CLKS; i++) { + /* + * Bulk clocks getting procedure can fail to find any clock due to + * running on a non-OF platform or due to the clocks being defined in + * bypass of the DT firmware (like da850, spear13xx). In that case we + * fallback to getting a single clock source right from the dev clocks + * list. + */ + rc = devm_clk_bulk_get_all(dev, &hpriv->clks); + if (rc < 0) + goto err_out; + + if (rc > 0) { + /* Got clocks in bulk */ + hpriv->n_clks = rc; + } else { /* - * For now we must use clk_get(dev, NULL) for the first clock, - * because some platforms (da850, spear13xx) are not yet - * converted to use devicetree for clocks. For new platforms - * this is equivalent to of_clk_get(dev->of_node, 0). + * No clock bulk found: fallback to manually getting + * the optional clock. */ - if (i == 0) - clk = clk_get(dev, NULL); - else - clk = of_clk_get(dev->of_node, i); - - if (IS_ERR(clk)) { - rc = PTR_ERR(clk); - if (rc == -EPROBE_DEFER) - goto err_out; - break; + hpriv->clks = devm_kzalloc(dev, sizeof(*hpriv->clks), GFP_KERNEL); + if (!hpriv->clks) { + rc = -ENOMEM; + goto err_out; + } + hpriv->clks->clk = devm_clk_get_optional(dev, NULL); + if (IS_ERR(hpriv->clks->clk)) { + rc = PTR_ERR(hpriv->clks->clk); + goto err_out; + } else if (hpriv->clks->clk) { + hpriv->clks->id = "ahci"; + hpriv->n_clks = 1; } - hpriv->clks[i] = clk; } hpriv->ahci_regulator = devm_regulator_get(dev, "ahci"); @@ -449,16 +538,28 @@ struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev, rc = PTR_ERR(hpriv->rsts); goto err_out; } + + hpriv->f_rsts = flags & AHCI_PLATFORM_RST_TRIGGER; } - hpriv->nports = child_nodes = of_get_child_count(dev->of_node); + /* + * Too many sub-nodes most likely means having something wrong with + * the firmware. + */ + child_nodes = of_get_child_count(dev->of_node); + if (child_nodes > AHCI_MAX_PORTS) { + rc = -EINVAL; + goto err_out; + } /* * If no sub-node was found, we still need to set nports to * one in order to be able to use the * ahci_platform_[en|dis]able_[phys|regulators] functions. */ - if (!child_nodes) + if (child_nodes) + hpriv->nports = child_nodes; + else hpriv->nports = 1; hpriv->phys = devm_kcalloc(dev, hpriv->nports, sizeof(*hpriv->phys), GFP_KERNEL); @@ -540,6 +641,15 @@ struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev, if (rc == -EPROBE_DEFER) goto err_out; } + + /* + * Retrieve firmware-specific flags which then will be used to set + * the HW-init fields of HBA and its ports + */ + rc = ahci_platform_get_firmware(hpriv, dev); + if (rc) + goto err_out; + pm_runtime_enable(dev); pm_runtime_get_sync(dev); hpriv->got_runtime_pm = true; |