summaryrefslogtreecommitdiffstats
path: root/drivers/ata
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata')
-rw-r--r--drivers/ata/ahci.c5
-rw-r--r--drivers/ata/ahci.h1
-rw-r--r--drivers/ata/ahci_brcm.c46
-rw-r--r--drivers/ata/ahci_ceva.c41
-rw-r--r--drivers/ata/ahci_tegra.c66
-rw-r--r--drivers/ata/ahci_xgene.c2
-rw-r--r--drivers/ata/ata_generic.c2
-rw-r--r--drivers/ata/libahci.c5
-rw-r--r--drivers/ata/libahci_platform.c4
-rw-r--r--drivers/ata/libata-acpi.c3
-rw-r--r--drivers/ata/libata-eh.c3
-rw-r--r--drivers/ata/libata-pmp.c2
-rw-r--r--drivers/ata/libata-sata.c4
-rw-r--r--drivers/ata/libata-scsi.c3
-rw-r--r--drivers/ata/libata-transport.c6
-rw-r--r--drivers/ata/pata_acpi.c6
-rw-r--r--drivers/ata/pata_ali.c6
-rw-r--r--drivers/ata/pata_amd.c6
-rw-r--r--drivers/ata/pata_arasan_cf.c15
-rw-r--r--drivers/ata/pata_artop.c4
-rw-r--r--drivers/ata/pata_atiixp.c3
-rw-r--r--drivers/ata/pata_cs5520.c2
-rw-r--r--drivers/ata/pata_cs5530.c2
-rw-r--r--drivers/ata/pata_hpt366.c1
-rw-r--r--drivers/ata/pata_hpt37x.c6
-rw-r--r--drivers/ata/pata_hpt3x2n.c2
-rw-r--r--drivers/ata/pata_it821x.c4
-rw-r--r--drivers/ata/pata_ixp4xx_cf.c8
-rw-r--r--drivers/ata/pata_jmicron.c2
-rw-r--r--drivers/ata/pata_legacy.c106
-rw-r--r--drivers/ata/pata_marvell.c2
-rw-r--r--drivers/ata/pata_ns87415.c4
-rw-r--r--drivers/ata/pata_opti.c2
-rw-r--r--drivers/ata/pata_optidma.c5
-rw-r--r--drivers/ata/pata_pdc2027x.c10
-rw-r--r--drivers/ata/pata_pdc202xx_old.c4
-rw-r--r--drivers/ata/pata_piccolo.c2
-rw-r--r--drivers/ata/pata_platform.c4
-rw-r--r--drivers/ata/pata_sil680.c2
-rw-r--r--drivers/ata/pata_sis.c2
-rw-r--r--drivers/ata/pata_sl82c105.c2
-rw-r--r--drivers/ata/pata_triflex.c7
-rw-r--r--drivers/ata/pata_via.c2
-rw-r--r--drivers/ata/sata_dwc_460ex.c10
-rw-r--r--drivers/ata/sata_mv.c18
45 files changed, 293 insertions, 149 deletions
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 00ba8e5a1ccc..33192a8f687d 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1772,6 +1772,11 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
hpriv->flags |= AHCI_HFLAG_NO_DEVSLP;
#ifdef CONFIG_ARM64
+ if (pdev->vendor == PCI_VENDOR_ID_HUAWEI &&
+ pdev->device == 0xa235 &&
+ pdev->revision < 0x30)
+ hpriv->flags |= AHCI_HFLAG_NO_SXS;
+
if (pdev->vendor == 0x177d && pdev->device == 0xa01c)
hpriv->irq_handler = ahci_thunderx_irq_handler;
#endif
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index 98b8baa47dc5..d1f284f0c83d 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -242,6 +242,7 @@ enum {
suspend/resume */
AHCI_HFLAG_IGN_NOTSUPP_POWER_ON = (1 << 27), /* ignore -EOPNOTSUPP
from phy_power_on() */
+ AHCI_HFLAG_NO_SXS = (1 << 28), /* SXS not supported */
/* ap->flags bits */
diff --git a/drivers/ata/ahci_brcm.c b/drivers/ata/ahci_brcm.c
index 5b32df5d33ad..6e9c5ade4c2e 100644
--- a/drivers/ata/ahci_brcm.c
+++ b/drivers/ata/ahci_brcm.c
@@ -86,7 +86,8 @@ struct brcm_ahci_priv {
u32 port_mask;
u32 quirks;
enum brcm_ahci_version version;
- struct reset_control *rcdev;
+ struct reset_control *rcdev_rescal;
+ struct reset_control *rcdev_ahci;
};
static inline u32 brcm_sata_readreg(void __iomem *addr)
@@ -352,8 +353,8 @@ static int brcm_ahci_suspend(struct device *dev)
else
ret = 0;
- if (priv->version != BRCM_SATA_BCM7216)
- reset_control_assert(priv->rcdev);
+ reset_control_assert(priv->rcdev_ahci);
+ reset_control_rearm(priv->rcdev_rescal);
return ret;
}
@@ -365,10 +366,10 @@ static int __maybe_unused brcm_ahci_resume(struct device *dev)
struct brcm_ahci_priv *priv = hpriv->plat_data;
int ret = 0;
- if (priv->version == BRCM_SATA_BCM7216)
- ret = reset_control_reset(priv->rcdev);
- else
- ret = reset_control_deassert(priv->rcdev);
+ ret = reset_control_deassert(priv->rcdev_ahci);
+ if (ret)
+ return ret;
+ ret = reset_control_reset(priv->rcdev_rescal);
if (ret)
return ret;
@@ -434,7 +435,6 @@ static int brcm_ahci_probe(struct platform_device *pdev)
{
const struct of_device_id *of_id;
struct device *dev = &pdev->dev;
- const char *reset_name = NULL;
struct brcm_ahci_priv *priv;
struct ahci_host_priv *hpriv;
struct resource *res;
@@ -456,15 +456,15 @@ static int brcm_ahci_probe(struct platform_device *pdev)
if (IS_ERR(priv->top_ctrl))
return PTR_ERR(priv->top_ctrl);
- /* Reset is optional depending on platform and named differently */
- if (priv->version == BRCM_SATA_BCM7216)
- reset_name = "rescal";
- else
- reset_name = "ahci";
-
- priv->rcdev = devm_reset_control_get_optional(&pdev->dev, reset_name);
- if (IS_ERR(priv->rcdev))
- return PTR_ERR(priv->rcdev);
+ if (priv->version == BRCM_SATA_BCM7216) {
+ priv->rcdev_rescal = devm_reset_control_get_optional_shared(
+ &pdev->dev, "rescal");
+ if (IS_ERR(priv->rcdev_rescal))
+ return PTR_ERR(priv->rcdev_rescal);
+ }
+ priv->rcdev_ahci = devm_reset_control_get_optional(&pdev->dev, "ahci");
+ if (IS_ERR(priv->rcdev_ahci))
+ return PTR_ERR(priv->rcdev_ahci);
hpriv = ahci_platform_get_resources(pdev, 0);
if (IS_ERR(hpriv))
@@ -485,10 +485,10 @@ static int brcm_ahci_probe(struct platform_device *pdev)
break;
}
- if (priv->version == BRCM_SATA_BCM7216)
- ret = reset_control_reset(priv->rcdev);
- else
- ret = reset_control_deassert(priv->rcdev);
+ ret = reset_control_reset(priv->rcdev_rescal);
+ if (ret)
+ return ret;
+ ret = reset_control_deassert(priv->rcdev_ahci);
if (ret)
return ret;
@@ -539,8 +539,8 @@ out_disable_regulators:
out_disable_clks:
ahci_platform_disable_clks(hpriv);
out_reset:
- if (priv->version != BRCM_SATA_BCM7216)
- reset_control_assert(priv->rcdev);
+ reset_control_assert(priv->rcdev_ahci);
+ reset_control_rearm(priv->rcdev_rescal);
return ret;
}
diff --git a/drivers/ata/ahci_ceva.c b/drivers/ata/ahci_ceva.c
index b10fd4c8c853..50b56cd0039d 100644
--- a/drivers/ata/ahci_ceva.c
+++ b/drivers/ata/ahci_ceva.c
@@ -12,6 +12,7 @@
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
+#include <linux/reset.h>
#include "ahci.h"
/* Vendor Specific Register Offsets */
@@ -87,6 +88,7 @@ struct ceva_ahci_priv {
u32 axicc;
bool is_cci_enabled;
int flags;
+ struct reset_control *rst;
};
static unsigned int ceva_ahci_read_id(struct ata_device *dev,
@@ -202,13 +204,46 @@ static int ceva_ahci_probe(struct platform_device *pdev)
cevapriv->ahci_pdev = pdev;
+ cevapriv->rst = devm_reset_control_get_optional_exclusive(&pdev->dev,
+ NULL);
+ if (IS_ERR(cevapriv->rst))
+ dev_err_probe(&pdev->dev, PTR_ERR(cevapriv->rst),
+ "failed to get reset\n");
+
hpriv = ahci_platform_get_resources(pdev, 0);
if (IS_ERR(hpriv))
return PTR_ERR(hpriv);
- rc = ahci_platform_enable_resources(hpriv);
- if (rc)
- return rc;
+ if (!cevapriv->rst) {
+ rc = ahci_platform_enable_resources(hpriv);
+ if (rc)
+ return rc;
+ } else {
+ int i;
+
+ rc = ahci_platform_enable_clks(hpriv);
+ if (rc)
+ return rc;
+ /* Assert the controller reset */
+ reset_control_assert(cevapriv->rst);
+
+ for (i = 0; i < hpriv->nports; i++) {
+ rc = phy_init(hpriv->phys[i]);
+ if (rc)
+ return rc;
+ }
+
+ /* De-assert the controller reset */
+ reset_control_deassert(cevapriv->rst);
+
+ for (i = 0; i < hpriv->nports; i++) {
+ rc = phy_power_on(hpriv->phys[i]);
+ if (rc) {
+ phy_exit(hpriv->phys[i]);
+ return rc;
+ }
+ }
+ }
if (of_property_read_bool(np, "ceva,broken-gen2"))
cevapriv->flags = CEVA_FLAG_BROKEN_GEN2;
diff --git a/drivers/ata/ahci_tegra.c b/drivers/ata/ahci_tegra.c
index cb55ebc1725b..4fb94db1217d 100644
--- a/drivers/ata/ahci_tegra.c
+++ b/drivers/ata/ahci_tegra.c
@@ -59,8 +59,6 @@
#define T_SATA0_CFG_PHY_1_PAD_PLL_IDDQ_EN BIT(22)
#define T_SATA0_NVOOB 0x114
-#define T_SATA0_NVOOB_COMMA_CNT_MASK (0xff << 16)
-#define T_SATA0_NVOOB_COMMA_CNT (0x07 << 16)
#define T_SATA0_NVOOB_SQUELCH_FILTER_MODE_MASK (0x3 << 24)
#define T_SATA0_NVOOB_SQUELCH_FILTER_MODE (0x1 << 24)
#define T_SATA0_NVOOB_SQUELCH_FILTER_LENGTH_MASK (0x3 << 26)
@@ -154,11 +152,18 @@ struct tegra_ahci_ops {
int (*init)(struct ahci_host_priv *hpriv);
};
+struct tegra_ahci_regs {
+ unsigned int nvoob_comma_cnt_mask;
+ unsigned int nvoob_comma_cnt_val;
+};
+
struct tegra_ahci_soc {
const char *const *supply_names;
u32 num_supplies;
bool supports_devslp;
+ bool has_sata_oob_rst;
const struct tegra_ahci_ops *ops;
+ const struct tegra_ahci_regs *regs;
};
struct tegra_ahci_priv {
@@ -240,11 +245,13 @@ static int tegra_ahci_power_on(struct ahci_host_priv *hpriv)
if (ret)
return ret;
- ret = tegra_powergate_sequence_power_up(TEGRA_POWERGATE_SATA,
- tegra->sata_clk,
- tegra->sata_rst);
- if (ret)
- goto disable_regulators;
+ if (!tegra->pdev->dev.pm_domain) {
+ ret = tegra_powergate_sequence_power_up(TEGRA_POWERGATE_SATA,
+ tegra->sata_clk,
+ tegra->sata_rst);
+ if (ret)
+ goto disable_regulators;
+ }
reset_control_assert(tegra->sata_oob_rst);
reset_control_assert(tegra->sata_cold_rst);
@@ -261,7 +268,8 @@ static int tegra_ahci_power_on(struct ahci_host_priv *hpriv)
disable_power:
clk_disable_unprepare(tegra->sata_clk);
- tegra_powergate_power_off(TEGRA_POWERGATE_SATA);
+ if (!tegra->pdev->dev.pm_domain)
+ tegra_powergate_power_off(TEGRA_POWERGATE_SATA);
disable_regulators:
regulator_bulk_disable(tegra->soc->num_supplies, tegra->supplies);
@@ -280,7 +288,8 @@ static void tegra_ahci_power_off(struct ahci_host_priv *hpriv)
reset_control_assert(tegra->sata_cold_rst);
clk_disable_unprepare(tegra->sata_clk);
- tegra_powergate_power_off(TEGRA_POWERGATE_SATA);
+ if (!tegra->pdev->dev.pm_domain)
+ tegra_powergate_power_off(TEGRA_POWERGATE_SATA);
regulator_bulk_disable(tegra->soc->num_supplies, tegra->supplies);
}
@@ -330,10 +339,10 @@ static int tegra_ahci_controller_init(struct ahci_host_priv *hpriv)
writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA_CFG_PHY_0);
val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA0_NVOOB);
- val &= ~(T_SATA0_NVOOB_COMMA_CNT_MASK |
+ val &= ~(tegra->soc->regs->nvoob_comma_cnt_mask |
T_SATA0_NVOOB_SQUELCH_FILTER_LENGTH_MASK |
T_SATA0_NVOOB_SQUELCH_FILTER_MODE_MASK);
- val |= (T_SATA0_NVOOB_COMMA_CNT |
+ val |= (tegra->soc->regs->nvoob_comma_cnt_val |
T_SATA0_NVOOB_SQUELCH_FILTER_LENGTH |
T_SATA0_NVOOB_SQUELCH_FILTER_MODE);
writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_NVOOB);
@@ -449,15 +458,35 @@ static const struct tegra_ahci_ops tegra124_ahci_ops = {
.init = tegra124_ahci_init,
};
+static const struct tegra_ahci_regs tegra124_ahci_regs = {
+ .nvoob_comma_cnt_mask = GENMASK(30, 28),
+ .nvoob_comma_cnt_val = (7 << 28),
+};
+
static const struct tegra_ahci_soc tegra124_ahci_soc = {
.supply_names = tegra124_supply_names,
.num_supplies = ARRAY_SIZE(tegra124_supply_names),
.supports_devslp = false,
+ .has_sata_oob_rst = true,
.ops = &tegra124_ahci_ops,
+ .regs = &tegra124_ahci_regs,
};
static const struct tegra_ahci_soc tegra210_ahci_soc = {
.supports_devslp = false,
+ .has_sata_oob_rst = true,
+ .regs = &tegra124_ahci_regs,
+};
+
+static const struct tegra_ahci_regs tegra186_ahci_regs = {
+ .nvoob_comma_cnt_mask = GENMASK(23, 16),
+ .nvoob_comma_cnt_val = (7 << 16),
+};
+
+static const struct tegra_ahci_soc tegra186_ahci_soc = {
+ .supports_devslp = false,
+ .has_sata_oob_rst = false,
+ .regs = &tegra186_ahci_regs,
};
static const struct of_device_id tegra_ahci_of_match[] = {
@@ -469,6 +498,10 @@ static const struct of_device_id tegra_ahci_of_match[] = {
.compatible = "nvidia,tegra210-ahci",
.data = &tegra210_ahci_soc
},
+ {
+ .compatible = "nvidia,tegra186-ahci",
+ .data = &tegra186_ahci_soc
+ },
{}
};
MODULE_DEVICE_TABLE(of, tegra_ahci_of_match);
@@ -518,10 +551,13 @@ static int tegra_ahci_probe(struct platform_device *pdev)
return PTR_ERR(tegra->sata_rst);
}
- tegra->sata_oob_rst = devm_reset_control_get(&pdev->dev, "sata-oob");
- if (IS_ERR(tegra->sata_oob_rst)) {
- dev_err(&pdev->dev, "Failed to get sata-oob reset\n");
- return PTR_ERR(tegra->sata_oob_rst);
+ if (tegra->soc->has_sata_oob_rst) {
+ tegra->sata_oob_rst = devm_reset_control_get(&pdev->dev,
+ "sata-oob");
+ if (IS_ERR(tegra->sata_oob_rst)) {
+ dev_err(&pdev->dev, "Failed to get sata-oob reset\n");
+ return PTR_ERR(tegra->sata_oob_rst);
+ }
}
tegra->sata_cold_rst = devm_reset_control_get(&pdev->dev, "sata-cold");
diff --git a/drivers/ata/ahci_xgene.c b/drivers/ata/ahci_xgene.c
index 16246c843365..dffc432b9d54 100644
--- a/drivers/ata/ahci_xgene.c
+++ b/drivers/ata/ahci_xgene.c
@@ -537,7 +537,7 @@ softreset_retry:
/**
* xgene_ahci_handle_broken_edge_irq - Handle the broken irq.
- * @ata_host: Host that recieved the irq
+ * @host: Host that recieved the irq
* @irq_masked: HOST_IRQ_STAT value
*
* For hardware with broken edge trigger latch
diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c
index 9ff545ce8da3..20a32e4d501d 100644
--- a/drivers/ata/ata_generic.c
+++ b/drivers/ata/ata_generic.c
@@ -151,7 +151,7 @@ static int is_intel_ider(struct pci_dev *dev)
}
/**
- * ata_generic_init - attach generic IDE
+ * ata_generic_init_one - attach generic IDE
* @dev: PCI device found
* @id: match entry
*
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index ea5bf5f4cbed..fec2e9754aed 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -493,6 +493,11 @@ void ahci_save_initial_config(struct device *dev, struct ahci_host_priv *hpriv)
cap |= HOST_CAP_ALPM;
}
+ if ((cap & HOST_CAP_SXS) && (hpriv->flags & AHCI_HFLAG_NO_SXS)) {
+ dev_info(dev, "controller does not support SXS, disabling CAP_SXS\n");
+ cap &= ~HOST_CAP_SXS;
+ }
+
if (hpriv->force_port_map && port_map != hpriv->force_port_map) {
dev_info(dev, "forcing port_map 0x%x -> 0x%x\n",
port_map, hpriv->force_port_map);
diff --git a/drivers/ata/libahci_platform.c b/drivers/ata/libahci_platform.c
index de638dafce21..b2f552088291 100644
--- a/drivers/ata/libahci_platform.c
+++ b/drivers/ata/libahci_platform.c
@@ -582,11 +582,13 @@ int ahci_platform_init_host(struct platform_device *pdev,
int i, irq, n_ports, rc;
irq = platform_get_irq(pdev, 0);
- if (irq <= 0) {
+ if (irq < 0) {
if (irq != -EPROBE_DEFER)
dev_err(dev, "no irq\n");
return irq;
}
+ if (!irq)
+ return -EINVAL;
hpriv->irq = irq;
diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c
index 224e3486e9a5..7a7d6642edcc 100644
--- a/drivers/ata/libata-acpi.c
+++ b/drivers/ata/libata-acpi.c
@@ -476,7 +476,7 @@ static int ata_dev_get_GTF(struct ata_device *dev, struct ata_acpi_gtf **gtf)
}
/**
- * ata_acpi_gtm_xfermode - determine xfermode from GTM parameter
+ * ata_acpi_gtm_xfermask - determine xfermode from GTM parameter
* @dev: target device
* @gtm: GTM parameter to use
*
@@ -624,6 +624,7 @@ static int ata_acpi_filter_tf(struct ata_device *dev,
* ata_acpi_run_tf - send taskfile registers to host controller
* @dev: target ATA device
* @gtf: raw ATA taskfile register set (0x1f1 - 0x1f7)
+ * @prev_gtf: previous command
*
* Outputs ATA taskfile to standard ATA host controller.
* Writes the control, feature, nsect, lbal, lbam, and lbah registers.
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index b6f92050e60c..bb3637762985 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1599,7 +1599,7 @@ static unsigned int ata_eh_analyze_tf(struct ata_queued_cmd *qc,
}
if (qc->flags & ATA_QCFLAG_SENSE_VALID) {
- int ret = scsi_check_sense(qc->scsicmd);
+ enum scsi_disposition ret = scsi_check_sense(qc->scsicmd);
/*
* SUCCESS here means that the sense code could be
* evaluated and should be passed to the upper layers
@@ -2613,6 +2613,7 @@ int ata_eh_reset(struct ata_link *link, int classify,
switch (tmp) {
case -EAGAIN:
rc = -EAGAIN;
+ break;
case 0:
break;
default:
diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c
index 79f2aeeb482a..ba7be3f38617 100644
--- a/drivers/ata/libata-pmp.c
+++ b/drivers/ata/libata-pmp.c
@@ -62,7 +62,7 @@ static unsigned int sata_pmp_read(struct ata_link *link, int reg, u32 *r_val)
* sata_pmp_write - write PMP register
* @link: link to write PMP register for
* @reg: register to write
- * @r_val: value to write
+ * @val: value to write
*
* Write PMP register.
*
diff --git a/drivers/ata/libata-sata.c b/drivers/ata/libata-sata.c
index c16423e44525..8adeab76dd38 100644
--- a/drivers/ata/libata-sata.c
+++ b/drivers/ata/libata-sata.c
@@ -1067,7 +1067,7 @@ int ata_scsi_change_queue_depth(struct scsi_device *sdev, int queue_depth)
EXPORT_SYMBOL_GPL(ata_scsi_change_queue_depth);
/**
- * port_alloc - Allocate port for a SAS attached SATA device
+ * ata_sas_port_alloc - Allocate port for a SAS attached SATA device
* @host: ATA host container for all SAS ports
* @port_info: Information from low-level host driver
* @shost: SCSI host that the scsi device is attached to
@@ -1127,7 +1127,7 @@ int ata_sas_port_start(struct ata_port *ap)
EXPORT_SYMBOL_GPL(ata_sas_port_start);
/**
- * ata_port_stop - Undo ata_sas_port_start()
+ * ata_sas_port_stop - Undo ata_sas_port_start()
* @ap: Port to shut down
*
* May be used as the port_stop() entry in ata_port_operations.
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 48b8934970f3..fd8b6febbf70 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -1043,8 +1043,7 @@ int ata_scsi_dev_config(struct scsi_device *sdev, struct ata_device *dev)
blk_queue_max_segments(q, queue_max_segments(q) - 1);
sdev->dma_drain_len = ATAPI_MAX_DRAIN;
- sdev->dma_drain_buf = kmalloc(sdev->dma_drain_len,
- q->bounce_gfp | GFP_KERNEL);
+ sdev->dma_drain_buf = kmalloc(sdev->dma_drain_len, GFP_NOIO);
if (!sdev->dma_drain_buf) {
ata_dev_err(dev, "drain buffer allocation failed\n");
return -ENOMEM;
diff --git a/drivers/ata/libata-transport.c b/drivers/ata/libata-transport.c
index 6a40e3c6cf49..34bb4608bdc6 100644
--- a/drivers/ata/libata-transport.c
+++ b/drivers/ata/libata-transport.c
@@ -250,7 +250,7 @@ static int ata_tport_match(struct attribute_container *cont,
/**
* ata_tport_delete -- remove ATA PORT
- * @port: ATA PORT to remove
+ * @ap: ATA PORT to remove
*
* Removes the specified ATA PORT. Remove the associated link as well.
*/
@@ -376,7 +376,7 @@ static int ata_tlink_match(struct attribute_container *cont,
/**
* ata_tlink_delete -- remove ATA LINK
- * @port: ATA LINK to remove
+ * @link: ATA LINK to remove
*
* Removes the specified ATA LINK. remove associated ATA device(s) as well.
*/
@@ -632,7 +632,7 @@ static void ata_tdev_free(struct ata_device *dev)
/**
* ata_tdev_delete -- remove ATA device
- * @port: ATA PORT to remove
+ * @ata_dev: ATA device to remove
*
* Removes the specified ATA device.
*/
diff --git a/drivers/ata/pata_acpi.c b/drivers/ata/pata_acpi.c
index fa2bfc344a97..ade4c3eee230 100644
--- a/drivers/ata/pata_acpi.c
+++ b/drivers/ata/pata_acpi.c
@@ -28,7 +28,7 @@ struct pata_acpi {
/**
* pacpi_pre_reset - check for 40/80 pin
- * @ap: Port
+ * @link: ATA link
* @deadline: deadline jiffies for the operation
*
* Perform the PATA port setup we need.
@@ -63,8 +63,8 @@ static int pacpi_cable_detect(struct ata_port *ap)
/**
* pacpi_discover_modes - filter non ACPI modes
+ * @ap: ATA port
* @adev: ATA device
- * @mask: proposed modes
*
* Try the modes available and see which ones the ACPI method will
* set up sensibly. From this we get a mask of ACPI modes we can use
@@ -224,7 +224,7 @@ static struct ata_port_operations pacpi_ops = {
/**
* pacpi_init_one - Register ACPI ATA PCI device with kernel services
* @pdev: PCI device to register
- * @ent: Entry in pacpi_pci_tbl matching with @pdev
+ * @id: PCI device ID
*
* Called from kernel PCI layer.
*
diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
index 0b122f903b8a..557ecf466102 100644
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c
@@ -108,8 +108,8 @@ static int ali_c2_cable_detect(struct ata_port *ap)
/**
* ali_20_filter - filter for earlier ALI DMA
- * @ap: ALi ATA port
- * @adev: attached device
+ * @adev: ATA device
+ * @mask: received mask to manipulate and pass back
*
* Ensure that we do not do DMA on CD devices. We may be able to
* fix that later on. Also ensure we do not do UDMA on WDC drives
@@ -313,7 +313,7 @@ static void ali_lock_sectors(struct ata_device *adev)
/**
* ali_check_atapi_dma - DMA check for most ALi controllers
- * @adev: Device
+ * @qc: Command to complete
*
* Called to decide whether commands should be sent by DMA or PIO
*/
diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c
index 987967f976cb..c8acba162d02 100644
--- a/drivers/ata/pata_amd.c
+++ b/drivers/ata/pata_amd.c
@@ -167,7 +167,6 @@ static int amd_cable_detect(struct ata_port *ap)
/**
* amd_fifo_setup - set the PIO FIFO for ATA/ATAPI
* @ap: ATA interface
- * @adev: ATA device
*
* Set the PCI fifo for this device according to the devices present
* on the bus at this point in time. We need to turn the post write buffer
@@ -320,8 +319,9 @@ static unsigned long nv_mode_filter(struct ata_device *dev,
}
/**
- * nv_probe_init - cable detection
- * @lin: ATA link
+ * nv_pre_reset - cable detection
+ * @link: ATA link
+ * @deadline: deadline jiffies for the operation
*
* Perform cable detection. The BIOS stores this in PCI config
* space for us.
diff --git a/drivers/ata/pata_arasan_cf.c b/drivers/ata/pata_arasan_cf.c
index e9cf31f38450..63f39440a9b4 100644
--- a/drivers/ata/pata_arasan_cf.c
+++ b/drivers/ata/pata_arasan_cf.c
@@ -818,12 +818,19 @@ static int arasan_cf_probe(struct platform_device *pdev)
else
quirk = CF_BROKEN_UDMA; /* as it is on spear1340 */
- /* if irq is 0, support only PIO */
- acdev->irq = platform_get_irq(pdev, 0);
- if (acdev->irq)
+ /*
+ * If there's an error getting IRQ (or we do get IRQ0),
+ * support only PIO
+ */
+ ret = platform_get_irq(pdev, 0);
+ if (ret > 0) {
+ acdev->irq = ret;
irq_handler = arasan_cf_interrupt;
- else
+ } else if (ret == -EPROBE_DEFER) {
+ return ret;
+ } else {
quirk |= CF_BROKEN_MWDMA | CF_BROKEN_UDMA;
+ }
acdev->pbase = res->start;
acdev->vbase = devm_ioremap(&pdev->dev, res->start,
diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c
index 6bd2228bb6ff..ad3c5808aaad 100644
--- a/drivers/ata/pata_artop.c
+++ b/drivers/ata/pata_artop.c
@@ -268,7 +268,7 @@ static void artop6260_set_dmamode (struct ata_port *ap, struct ata_device *adev)
}
/**
- * artop_6210_qc_defer - implement serialization
+ * artop6210_qc_defer - implement serialization
* @qc: command
*
* Issue commands per host on this chip.
@@ -344,7 +344,7 @@ static void atp8xx_fixup(struct pci_dev *pdev)
/**
* artop_init_one - Register ARTOP ATA PCI device with kernel services
* @pdev: PCI device to register
- * @ent: Entry in artop_pci_tbl matching with @pdev
+ * @id: PCI device ID
*
* Called from kernel PCI layer.
*
diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c
index c68aa3f585f2..d671d33ef287 100644
--- a/drivers/ata/pata_atiixp.c
+++ b/drivers/ata/pata_atiixp.c
@@ -93,6 +93,7 @@ static int atiixp_prereset(struct ata_link *link, unsigned long deadline)
* atiixp_set_pio_timing - set initial PIO mode data
* @ap: ATA interface
* @adev: ATA device
+ * @pio: Requested PIO
*
* Called by both the pio and dma setup functions to set the controller
* timings for PIO transfers. We must load both the mode number and
@@ -227,7 +228,7 @@ static void atiixp_bmdma_start(struct ata_queued_cmd *qc)
}
/**
- * atiixp_dma_stop - DMA stop callback
+ * atiixp_bmdma_stop - DMA stop callback
* @qc: Command in progress
*
* DMA has completed. Clear the UDMA flag as the next operations will
diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c
index 9052148b306d..d09d432d3c44 100644
--- a/drivers/ata/pata_cs5520.c
+++ b/drivers/ata/pata_cs5520.c
@@ -52,6 +52,7 @@ static const struct pio_clocks cs5520_pio_clocks[]={
* cs5520_set_timings - program PIO timings
* @ap: ATA port
* @adev: ATA device
+ * @pio: PIO ID
*
* Program the PIO mode timings for the controller according to the pio
* clocking table.
@@ -246,6 +247,7 @@ static int cs5520_reinit_one(struct pci_dev *pdev)
/**
* cs5520_pci_device_suspend - device suspend
* @pdev: PCI device
+ * @mesg: PM event message
*
* We have to cut and waste bits from the standard method because
* the 5520 is a bit odd and not just a pure ATA device. As a result
diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c
index ad75d02b6dac..a1b4aaccaa50 100644
--- a/drivers/ata/pata_cs5530.c
+++ b/drivers/ata/pata_cs5530.c
@@ -271,7 +271,7 @@ fail_put:
/**
* cs5530_init_one - Initialise a CS5530
- * @dev: PCI device
+ * @pdev: PCI device
* @id: Entry in match table
*
* Install a driver for the newly found CS5530 companion chip. Most of
diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c
index 2574d6fbb1ad..06b7c4a9ec95 100644
--- a/drivers/ata/pata_hpt366.c
+++ b/drivers/ata/pata_hpt366.c
@@ -192,6 +192,7 @@ static int hpt_dma_blacklisted(const struct ata_device *dev, char *modestr,
/**
* hpt366_filter - mode selection filter
* @adev: ATA device
+ * @mask: Current mask to manipulate and pass back
*
* Block UDMA on devices that cause trouble with this controller.
*/
diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
index fad6c6a87313..f242157bc81b 100644
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -275,6 +275,7 @@ static const char * const bad_ata100_5[] = {
/**
* hpt370_filter - mode selection filter
* @adev: ATA device
+ * @mask: mode mask
*
* Block UDMA on devices that cause trouble with this controller.
*/
@@ -293,6 +294,7 @@ static unsigned long hpt370_filter(struct ata_device *adev, unsigned long mask)
/**
* hpt370a_filter - mode selection filter
* @adev: ATA device
+ * @mask: mode mask
*
* Block UDMA on devices that cause trouble with this controller.
*/
@@ -463,7 +465,7 @@ static void hpt370_set_dmamode(struct ata_port *ap, struct ata_device *adev)
}
/**
- * hpt370_bmdma_end - DMA engine stop
+ * hpt370_bmdma_stop - DMA engine stop
* @qc: ATA command
*
* Work around the HPT370 DMA engine.
@@ -557,7 +559,7 @@ static void hpt372_set_dmamode(struct ata_port *ap, struct ata_device *adev)
}
/**
- * hpt37x_bmdma_end - DMA engine stop
+ * hpt37x_bmdma_stop - DMA engine stop
* @qc: ATA command
*
* Clean up after the HPT372 and later DMA engine
diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c
index 9cb2d50db876..48eef338e050 100644
--- a/drivers/ata/pata_hpt3x2n.c
+++ b/drivers/ata/pata_hpt3x2n.c
@@ -237,7 +237,7 @@ static void hpt3x2n_set_dmamode(struct ata_port *ap, struct ata_device *adev)
}
/**
- * hpt3x2n_bmdma_end - DMA engine stop
+ * hpt3x2n_bmdma_stop - DMA engine stop
* @qc: ATA command
*
* Clean up after the HPT3x2n and later DMA engine
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index 9bac79edbc2c..0e2265978a34 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -334,7 +334,7 @@ static void it821x_passthru_set_dmamode(struct ata_port *ap, struct ata_device *
}
/**
- * it821x_passthru_dma_start - DMA start callback
+ * it821x_passthru_bmdma_start - DMA start callback
* @qc: Command in progress
*
* Usually drivers set the DMA timing at the point the set_dmamode call
@@ -357,7 +357,7 @@ static void it821x_passthru_bmdma_start(struct ata_queued_cmd *qc)
}
/**
- * it821x_passthru_dma_stop - DMA stop callback
+ * it821x_passthru_bmdma_stop - DMA stop callback
* @qc: ATA command
*
* We loaded new timings in dma_start, as a result we need to restore
diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c
index d1644a8ef9fa..43215a4c1e54 100644
--- a/drivers/ata/pata_ixp4xx_cf.c
+++ b/drivers/ata/pata_ixp4xx_cf.c
@@ -135,12 +135,12 @@ static void ixp4xx_setup_port(struct ata_port *ap,
static int ixp4xx_pata_probe(struct platform_device *pdev)
{
- unsigned int irq;
struct resource *cs0, *cs1;
struct ata_host *host;
struct ata_port *ap;
struct ixp4xx_pata_data *data = dev_get_platdata(&pdev->dev);
int ret;
+ int irq;
cs0 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
cs1 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
@@ -165,8 +165,12 @@ static int ixp4xx_pata_probe(struct platform_device *pdev)
return -ENOMEM;
irq = platform_get_irq(pdev, 0);
- if (irq)
+ if (irq > 0)
irq_set_irq_type(irq, IRQ_TYPE_EDGE_RISING);
+ else if (irq < 0)
+ return irq;
+ else
+ return -EINVAL;
/* Setup expansion bus chip selects */
*data->cs0_cfg = data->cs0_bits;
diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c
index c3dedd3e71fb..d1b3ce8958dd 100644
--- a/drivers/ata/pata_jmicron.c
+++ b/drivers/ata/pata_jmicron.c
@@ -120,7 +120,7 @@ static struct ata_port_operations jmicron_ops = {
/**
* jmicron_init_one - Register Jmicron ATA PCI device with kernel services
* @pdev: PCI device to register
- * @ent: Entry in jmicron_pci_tbl matching with @pdev
+ * @id: PCI device ID
*
* Called from kernel PCI layer.
*
diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c
index 4fd12b20df23..c3e6592712c4 100644
--- a/drivers/ata/pata_legacy.c
+++ b/drivers/ata/pata_legacy.c
@@ -63,7 +63,66 @@
static int all;
module_param(all, int, 0444);
-MODULE_PARM_DESC(all, "Grab all legacy port devices, even if PCI(0=off, 1=on)");
+MODULE_PARM_DESC(all,
+ "Set to probe unclaimed pri/sec ISA port ranges even if PCI");
+
+static int probe_all;
+module_param(probe_all, int, 0);
+MODULE_PARM_DESC(probe_all,
+ "Set to probe tertiary+ ISA port ranges even if PCI");
+
+static int probe_mask = ~0;
+module_param(probe_mask, int, 0);
+MODULE_PARM_DESC(probe_mask, "Probe mask for legacy ISA PATA ports");
+
+static int autospeed;
+module_param(autospeed, int, 0);
+MODULE_PARM_DESC(autospeed, "Chip present that snoops speed changes");
+
+static int pio_mask = ATA_PIO4;
+module_param(pio_mask, int, 0);
+MODULE_PARM_DESC(pio_mask, "PIO range for autospeed devices");
+
+static int iordy_mask = 0xFFFFFFFF;
+module_param(iordy_mask, int, 0);
+MODULE_PARM_DESC(iordy_mask, "Use IORDY if available");
+
+static int ht6560a;
+module_param(ht6560a, int, 0);
+MODULE_PARM_DESC(ht6560a, "HT 6560A on primary 1, second 2, both 3");
+
+static int ht6560b;
+module_param(ht6560b, int, 0);
+MODULE_PARM_DESC(ht6560b, "HT 6560B on primary 1, secondary 2, both 3");
+
+static int opti82c611a;
+module_param(opti82c611a, int, 0);
+MODULE_PARM_DESC(opti82c611a,
+ "Opti 82c611A on primary 1, secondary 2, both 3");
+
+static int opti82c46x;
+module_param(opti82c46x, int, 0);
+MODULE_PARM_DESC(opti82c46x,
+ "Opti 82c465MV on primary 1, secondary 2, both 3");
+
+#ifdef CONFIG_PATA_QDI_MODULE
+static int qdi = 1;
+#else
+static int qdi;
+#endif
+module_param(qdi, int, 0);
+MODULE_PARM_DESC(qdi, "Set to probe QDI controllers");
+
+#ifdef CONFIG_PATA_WINBOND_VLB_MODULE
+static int winbond = 1;
+#else
+static int winbond;
+#endif
+module_param(winbond, int, 0);
+MODULE_PARM_DESC(winbond,
+ "Set to probe Winbond controllers, "
+ "give I/O port if non standard");
+
enum controller {
BIOS = 0,
@@ -117,30 +176,6 @@ static struct ata_host *legacy_host[NR_HOST];
static int nr_legacy_host;
-static int probe_all; /* Set to check all ISA port ranges */
-static int ht6560a; /* HT 6560A on primary 1, second 2, both 3 */
-static int ht6560b; /* HT 6560A on primary 1, second 2, both 3 */
-static int opti82c611a; /* Opti82c611A on primary 1, sec 2, both 3 */
-static int opti82c46x; /* Opti 82c465MV present(pri/sec autodetect) */
-static int autospeed; /* Chip present which snoops speed changes */
-static int pio_mask = ATA_PIO4; /* PIO range for autospeed devices */
-static int iordy_mask = 0xFFFFFFFF; /* Use iordy if available */
-
-/* Set to probe QDI controllers */
-#ifdef CONFIG_PATA_QDI_MODULE
-static int qdi = 1;
-#else
-static int qdi;
-#endif
-
-#ifdef CONFIG_PATA_WINBOND_VLB_MODULE
-static int winbond = 1; /* Set to probe Winbond controllers,
- give I/O port if non standard */
-#else
-static int winbond; /* Set to probe Winbond controllers,
- give I/O port if non standard */
-#endif
-
/**
* legacy_probe_add - Add interface to probe list
* @port: Controller port
@@ -168,6 +203,8 @@ static int legacy_probe_add(unsigned long port, unsigned int irq,
free = lp;
/* Matching port, or the correct slot for ordering */
if (lp->port == port || legacy_port[i] == port) {
+ if (!(probe_mask & 1 << i))
+ return -1;
free = lp;
break;
}
@@ -588,7 +625,7 @@ static void opti82c46x_set_piomode(struct ata_port *ap, struct ata_device *adev)
}
/**
- * opt82c465mv_qc_issue - command issue
+ * opti82c46x_qc_issue - command issue
* @qc: command pending
*
* Called when the libata layer is about to issue a command. We wrap
@@ -923,7 +960,7 @@ static __init int probe_chip_type(struct legacy_probe *probe)
/**
* legacy_init_one - attach a legacy interface
- * @pl: probe record
+ * @probe: probe record
*
* Register an ISA bus IDE interface. Such interfaces are PIO and we
* assume do not support IRQ sharing.
@@ -1009,8 +1046,8 @@ fail:
/**
* legacy_check_special_cases - ATA special cases
* @p: PCI device to check
- * @master: set this if we find an ATA master
- * @master: set this if we find an ATA secondary
+ * @primary: set this if we find an ATA master
+ * @secondary: set this if we find an ATA secondary
*
* A small number of vendors implemented early PCI ATA interfaces
* on bridge logic without the ATA interface being PCI visible.
@@ -1250,16 +1287,5 @@ MODULE_VERSION(DRV_VERSION);
MODULE_ALIAS("pata_qdi");
MODULE_ALIAS("pata_winbond");
-module_param(probe_all, int, 0);
-module_param(autospeed, int, 0);
-module_param(ht6560a, int, 0);
-module_param(ht6560b, int, 0);
-module_param(opti82c611a, int, 0);
-module_param(opti82c46x, int, 0);
-module_param(qdi, int, 0);
-module_param(winbond, int, 0);
-module_param(pio_mask, int, 0);
-module_param(iordy_mask, int, 0);
-
module_init(legacy_init);
module_exit(legacy_exit);
diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c
index b066809ba9a1..361597d14c56 100644
--- a/drivers/ata/pata_marvell.c
+++ b/drivers/ata/pata_marvell.c
@@ -110,7 +110,7 @@ static struct ata_port_operations marvell_ops = {
/**
* marvell_init_one - Register Marvell ATA PCI device with kernel services
* @pdev: PCI device to register
- * @ent: Entry in marvell_pci_tbl matching with @pdev
+ * @id: PCI device ID
*
* Called from kernel PCI layer.
*
diff --git a/drivers/ata/pata_ns87415.c b/drivers/ata/pata_ns87415.c
index 1532b2e3c672..f4949e704356 100644
--- a/drivers/ata/pata_ns87415.c
+++ b/drivers/ata/pata_ns87415.c
@@ -113,7 +113,7 @@ static void ns87415_set_piomode(struct ata_port *ap, struct ata_device *adev)
* ns87415_bmdma_setup - Set up DMA
* @qc: Command block
*
- * Set up for bus masterng DMA. We have to do this ourselves
+ * Set up for bus mastering DMA. We have to do this ourselves
* rather than use the helper due to a chip erratum
*/
@@ -174,7 +174,7 @@ static void ns87415_bmdma_stop(struct ata_queued_cmd *qc)
* ns87415_irq_clear - Clear interrupt
* @ap: Channel to clear
*
- * Erratum: Due to a chip bug regisers 02 and 0A bit 1 and 2 (the
+ * Erratum: Due to a chip bug registers 02 and 0A bit 1 and 2 (the
* error bits) are reset by writing to register 00 or 08.
*/
diff --git a/drivers/ata/pata_opti.c b/drivers/ata/pata_opti.c
index 06a800a3b070..01976c4e4033 100644
--- a/drivers/ata/pata_opti.c
+++ b/drivers/ata/pata_opti.c
@@ -69,7 +69,7 @@ static int opti_pre_reset(struct ata_link *link, unsigned long deadline)
/**
* opti_write_reg - control register setup
* @ap: ATA port
- * @value: value
+ * @val: value
* @reg: control register number
*
* The Opti uses magic 'trapdoor' register accesses to do configuration
diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c
index fbcf0af34924..f6278d9de348 100644
--- a/drivers/ata/pata_optidma.c
+++ b/drivers/ata/pata_optidma.c
@@ -287,7 +287,7 @@ static void optiplus_set_dma_mode(struct ata_port *ap, struct ata_device *adev)
}
/**
- * optidma_make_bits - PCI setup helper
+ * optidma_make_bits43 - PCI setup helper
* @adev: ATA device
*
* Turn the ATA device setup into PCI configuration bits
@@ -309,6 +309,7 @@ static u8 optidma_make_bits43(struct ata_device *adev)
/**
* optidma_set_mode - mode setup
* @link: link to set up
+ * @r_failed: out parameter for failed device
*
* Use the standard setup to tune the chipset and then finalise the
* configuration by writing the nibble of extra bits of data into
@@ -354,7 +355,7 @@ static struct ata_port_operations optiplus_port_ops = {
/**
* optiplus_with_udma - Look for UDMA capable setup
- * @pdev; ATA controller
+ * @pdev: ATA controller
*/
static int optiplus_with_udma(struct pci_dev *pdev)
diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c
index de834fbb6dfe..effc1a09444d 100644
--- a/drivers/ata/pata_pdc2027x.c
+++ b/drivers/ata/pata_pdc2027x.c
@@ -196,7 +196,7 @@ static inline void __iomem *dev_mmio(struct ata_port *ap, struct ata_device *ade
}
/**
- * pdc2027x_pata_cable_detect - Probe host controller cable detect info
+ * pdc2027x_cable_detect - Probe host controller cable detect info
* @ap: Port for which cable detect info is desired
*
* Read 80c cable indicator from Promise extended register.
@@ -251,7 +251,7 @@ static int pdc2027x_prereset(struct ata_link *link, unsigned long deadline)
}
/**
- * pdc2720x_mode_filter - mode selection filter
+ * pdc2027x_mode_filter - mode selection filter
* @adev: ATA device
* @mask: list of modes proposed
*
@@ -503,11 +503,11 @@ retry:
}
/**
- * adjust_pll - Adjust the PLL input clock in Hz.
+ * pdc_adjust_pll - Adjust the PLL input clock in Hz.
*
- * @pdc_controller: controller specific information
* @host: target ATA host
* @pll_clock: The input of PLL in HZ
+ * @board_idx: board identifier
*/
static void pdc_adjust_pll(struct ata_host *host, long pll_clock, unsigned int board_idx)
{
@@ -590,7 +590,7 @@ static void pdc_adjust_pll(struct ata_host *host, long pll_clock, unsigned int b
}
/**
- * detect_pll_input_clock - Detect the PLL input clock in Hz.
+ * pdc_detect_pll_input_clock - Detect the PLL input clock in Hz.
* @host: target ATA host
* Ex. 16949000 on 33MHz PCI bus for pdc20275.
* Half of the PCI clock.
diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c
index 378ed9ea97e9..0c5cbcd28d0d 100644
--- a/drivers/ata/pata_pdc202xx_old.c
+++ b/drivers/ata/pata_pdc202xx_old.c
@@ -115,7 +115,7 @@ static void pdc202xx_set_piomode(struct ata_port *ap, struct ata_device *adev)
}
/**
- * pdc202xx_configure_dmamode - set DMA mode in chip
+ * pdc202xx_set_dmamode - set DMA mode in chip
* @ap: ATA interface
* @adev: ATA device
*
@@ -214,7 +214,7 @@ static void pdc2026x_bmdma_start(struct ata_queued_cmd *qc)
}
/**
- * pdc2026x_bmdma_end - DMA engine stop
+ * pdc2026x_bmdma_stop - DMA engine stop
* @qc: ATA command
*
* After a DMA completes we need to put the clock back to 33MHz for
diff --git a/drivers/ata/pata_piccolo.c b/drivers/ata/pata_piccolo.c
index 35cb0e263237..389b63b13c70 100644
--- a/drivers/ata/pata_piccolo.c
+++ b/drivers/ata/pata_piccolo.c
@@ -74,7 +74,7 @@ static struct ata_port_operations tosh_port_ops = {
};
/**
- * ata_tosh_init - attach generic IDE
+ * ata_tosh_init_one - attach generic IDE
* @dev: PCI device found
* @id: match entry
*
diff --git a/drivers/ata/pata_platform.c b/drivers/ata/pata_platform.c
index 5aba691f09af..028329428b75 100644
--- a/drivers/ata/pata_platform.c
+++ b/drivers/ata/pata_platform.c
@@ -24,6 +24,8 @@
#define DRV_VERSION "1.2"
static int pio_mask = 1;
+module_param(pio_mask, int, 0);
+MODULE_PARM_DESC(pio_mask, "PIO modes supported, mode 0 only by default");
/*
* Provide our own set_mode() as we don't want to change anything that has
@@ -233,8 +235,6 @@ static struct platform_driver pata_platform_driver = {
module_platform_driver(pata_platform_driver);
-module_param(pio_mask, int, 0);
-
MODULE_AUTHOR("Paul Mundt");
MODULE_DESCRIPTION("low-level driver for platform device ATA");
MODULE_LICENSE("GPL");
diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
index 7ab9aea3b630..43215a664b96 100644
--- a/drivers/ata/pata_sil680.c
+++ b/drivers/ata/pata_sil680.c
@@ -57,6 +57,7 @@ static unsigned long sil680_selreg(struct ata_port *ap, int r)
/**
* sil680_seldev - return register base
* @ap: ATA interface
+ * @adev: ATA device
* @r: config offset
*
* Turn a config register offset into the right address in PCI space
@@ -244,6 +245,7 @@ static struct ata_port_operations sil680_port_ops = {
/**
* sil680_init_chip - chip setup
* @pdev: PCI device
+ * @try_mmio: Indicates to caller whether MMIO should be attempted
*
* Perform all the chip setup which must be done both when the device
* is powered up on boot and when we resume in case we resumed from RAM.
diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
index d7cd39a9888a..b5b764e18adf 100644
--- a/drivers/ata/pata_sis.c
+++ b/drivers/ata/pata_sis.c
@@ -114,7 +114,6 @@ static int sis_port_base(struct ata_device *adev)
/**
* sis_133_cable_detect - check for 40/80 pin
* @ap: Port
- * @deadline: deadline jiffies for the operation
*
* Perform cable detection for the later UDMA133 capable
* SiS chipset.
@@ -521,6 +520,7 @@ static void sis_133_set_dmamode (struct ata_port *ap, struct ata_device *adev)
/**
* sis_133_mode_filter - mode selection filter
* @adev: ATA device
+ * @mask: received mask to manipulate and pass back
*
* Block UDMA6 on devices that do not support it.
*/
diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c
index ac7ddd87f188..8487470e2e01 100644
--- a/drivers/ata/pata_sl82c105.c
+++ b/drivers/ata/pata_sl82c105.c
@@ -173,7 +173,7 @@ static void sl82c105_bmdma_start(struct ata_queued_cmd *qc)
}
/**
- * sl82c105_bmdma_end - DMA engine stop
+ * sl82c105_bmdma_stop - DMA engine stop
* @qc: ATA command
*
* Reset the DMA engine each use as recommended by the errata
diff --git a/drivers/ata/pata_triflex.c b/drivers/ata/pata_triflex.c
index 2a4d38b98026..8a033598e7e1 100644
--- a/drivers/ata/pata_triflex.c
+++ b/drivers/ata/pata_triflex.c
@@ -129,7 +129,7 @@ static void triflex_set_piomode(struct ata_port *ap, struct ata_device *adev)
}
/**
- * triflex_dma_start - DMA start callback
+ * triflex_bmdma_start - DMA start callback
* @qc: Command in progress
*
* Usually drivers set the DMA timing at the point the set_dmamode call
@@ -146,9 +146,8 @@ static void triflex_bmdma_start(struct ata_queued_cmd *qc)
}
/**
- * triflex_dma_stop - DMA stop callback
- * @ap: ATA interface
- * @adev: ATA device
+ * triflex_bmdma_stop - DMA stop callback
+ * @qc: ATA command
*
* We loaded new timings in dma_start, as a result we need to restore
* the PIO timings in dma_stop so that the next command issue gets the
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index 38044e679795..475032048984 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -663,7 +663,7 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
#ifdef CONFIG_PM_SLEEP
/**
* via_reinit_one - reinit after resume
- * @pdev; PCI device
+ * @pdev: PCI device
*
* Called when the VIA PATA device is resumed. We must then
* reconfigure the fifo and other setup we may have altered. In
diff --git a/drivers/ata/sata_dwc_460ex.c b/drivers/ata/sata_dwc_460ex.c
index 9dcef6ac643b..f0ef844428bb 100644
--- a/drivers/ata/sata_dwc_460ex.c
+++ b/drivers/ata/sata_dwc_460ex.c
@@ -543,6 +543,11 @@ static irqreturn_t sata_dwc_isr(int irq, void *dev_instance)
hsdev->sactive_issued |= qcmd_tag_to_mask(tag);
qc = ata_qc_from_tag(ap, tag);
+ if (unlikely(!qc)) {
+ dev_err(ap->dev, "failed to get qc");
+ handled = 1;
+ goto DONE;
+ }
/*
* Start FP DMA for NCQ command. At this point the tag is the
* active tag. It is the tag that matches the command about to
@@ -658,6 +663,11 @@ DRVSTILLBUSY:
tag_mask &= (~0x00000001);
qc = ata_qc_from_tag(ap, tag);
+ if (unlikely(!qc)) {
+ dev_err(ap->dev, "failed to get qc");
+ handled = 1;
+ goto DONE;
+ }
/* To be picked up by completion functions */
qc->ap->link.active_tag = tag;
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 664ef658a955..c8867c12c0b8 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -1146,9 +1146,8 @@ static void mv_set_irq_coalescing(struct ata_host *host,
spin_unlock_irqrestore(&host->lock, flags);
}
-/**
+/*
* mv_start_edma - Enable eDMA engine
- * @base: port base address
* @pp: port private data
*
* Verify the local cache of the eDMA state is accurate with a
@@ -1519,7 +1518,7 @@ static void mv_60x1_errata_sata25(struct ata_port *ap, int want_ncq)
writel(new, hpriv->base + GPIO_PORT_CTL);
}
-/**
+/*
* mv_bmdma_enable - set a magic bit on GEN_IIE to allow bmdma
* @ap: Port being initialized
*
@@ -1918,8 +1917,8 @@ static void mv_bmdma_start(struct ata_queued_cmd *qc)
}
/**
- * mv_bmdma_stop - Stop BMDMA transfer
- * @qc: queued command to stop DMA on.
+ * mv_bmdma_stop_ap - Stop BMDMA transfer
+ * @ap: port to stop
*
* Clears the ATA_DMA_START flag in the bmdma control register
*
@@ -2221,6 +2220,7 @@ static u8 mv_sff_check_status(struct ata_port *ap)
/**
* mv_send_fis - Send a FIS, using the "Vendor-Unique FIS" register
+ * @ap: ATA port to send a FIS
* @fis: fis to be sent
* @nwords: number of 32-bit words in the fis
*/
@@ -3249,7 +3249,7 @@ static void mv6_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio)
writel(tmp, mmio + GPIO_PORT_CTL);
}
-/**
+/*
* mv6_reset_hc - Perform the 6xxx global soft reset
* @mmio: base address of the HBA
*
@@ -3530,7 +3530,7 @@ static void mv_soc_65n_phy_errata(struct mv_host_priv *hpriv,
writel(reg, port_mmio + PHY_MODE9_GEN1);
}
-/**
+/*
* soc_is_65 - check if the soc is 65 nano device
*
* Detect the type of the SoC, this is done by reading the PHYCFG_OFS
@@ -4097,6 +4097,10 @@ static int mv_platform_probe(struct platform_device *pdev)
n_ports = mv_platform_data->n_ports;
irq = platform_get_irq(pdev, 0);
}
+ if (irq < 0)
+ return irq;
+ if (!irq)
+ return -EINVAL;
host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports);
hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL);