diff options
Diffstat (limited to 'drivers/clk/zynqmp')
| -rw-r--r-- | drivers/clk/zynqmp/Kconfig | 4 | ||||
| -rw-r--r-- | drivers/clk/zynqmp/pll.c | 24 |
2 files changed, 19 insertions, 9 deletions
diff --git a/drivers/clk/zynqmp/Kconfig b/drivers/clk/zynqmp/Kconfig index 17086059be8b..00df6be25c5d 100644 --- a/drivers/clk/zynqmp/Kconfig +++ b/drivers/clk/zynqmp/Kconfig @@ -2,8 +2,8 @@ config COMMON_CLK_ZYNQMP bool "Support for Xilinx ZynqMP Ultrascale+ clock controllers" - depends on ARCH_ZYNQMP || COMPILE_TEST - depends on ZYNQMP_FIRMWARE + depends on ZYNQMP_FIRMWARE || COMPILE_TEST + default ZYNQMP_FIRMWARE help Support for the Zynqmp Ultrascale clock controller. It has a dependency on the PMU firmware. diff --git a/drivers/clk/zynqmp/pll.c b/drivers/clk/zynqmp/pll.c index 92f449ed38e5..abe6afbf3407 100644 --- a/drivers/clk/zynqmp/pll.c +++ b/drivers/clk/zynqmp/pll.c @@ -14,10 +14,12 @@ * struct zynqmp_pll - PLL clock * @hw: Handle between common and hardware-specific interfaces * @clk_id: PLL clock ID + * @set_pll_mode: Whether an IOCTL_SET_PLL_FRAC_MODE request be sent to ATF */ struct zynqmp_pll { struct clk_hw hw; u32 clk_id; + bool set_pll_mode; }; #define to_zynqmp_pll(_hw) container_of(_hw, struct zynqmp_pll, hw) @@ -81,6 +83,8 @@ static inline void zynqmp_pll_set_mode(struct clk_hw *hw, bool on) if (ret) pr_warn_once("%s() PLL set frac mode failed for %s, ret = %d\n", __func__, clk_name, ret); + else + clk->set_pll_mode = true; } /** @@ -100,9 +104,7 @@ static long zynqmp_pll_round_rate(struct clk_hw *hw, unsigned long rate, /* Enable the fractional mode if needed */ rate_div = (rate * FRAC_DIV) / *prate; f = rate_div % FRAC_DIV; - zynqmp_pll_set_mode(hw, !!f); - - if (zynqmp_pll_get_mode(hw) == PLL_MODE_FRAC) { + if (f) { if (rate > PS_PLL_VCO_MAX) { fbdiv = rate / PS_PLL_VCO_MAX; rate = rate / (fbdiv + 1); @@ -173,10 +175,12 @@ static int zynqmp_pll_set_rate(struct clk_hw *hw, unsigned long rate, long rate_div, frac, m, f; int ret; - if (zynqmp_pll_get_mode(hw) == PLL_MODE_FRAC) { - rate_div = (rate * FRAC_DIV) / parent_rate; + rate_div = (rate * FRAC_DIV) / parent_rate; + f = rate_div % FRAC_DIV; + zynqmp_pll_set_mode(hw, !!f); + + if (f) { m = rate_div / FRAC_DIV; - f = rate_div % FRAC_DIV; m = clamp_t(u32, m, (PLL_FBDIV_MIN), (PLL_FBDIV_MAX)); rate = parent_rate * m; frac = (parent_rate * f) / FRAC_DIV; @@ -240,9 +244,15 @@ static int zynqmp_pll_enable(struct clk_hw *hw) u32 clk_id = clk->clk_id; int ret; - if (zynqmp_pll_is_enabled(hw)) + /* + * Don't skip enabling clock if there is an IOCTL_SET_PLL_FRAC_MODE request + * that has been sent to ATF. + */ + if (zynqmp_pll_is_enabled(hw) && (!clk->set_pll_mode)) return 0; + clk->set_pll_mode = false; + ret = zynqmp_pm_clock_enable(clk_id); if (ret) pr_warn_once("%s() clock enable failed for %s, ret = %d\n", |