diff options
Diffstat (limited to 'drivers/gpu/drm/arm/malidp_crtc.c')
| -rw-r--r-- | drivers/gpu/drm/arm/malidp_crtc.c | 216 |
1 files changed, 216 insertions, 0 deletions
diff --git a/drivers/gpu/drm/arm/malidp_crtc.c b/drivers/gpu/drm/arm/malidp_crtc.c new file mode 100644 index 000000000000..08e6a71f5d05 --- /dev/null +++ b/drivers/gpu/drm/arm/malidp_crtc.c @@ -0,0 +1,216 @@ +/* + * (C) COPYRIGHT 2016 ARM Limited. All rights reserved. + * Author: Liviu Dudau <Liviu.Dudau@arm.com> + * + * This program is free software and is provided to you under the terms of the + * GNU General Public License version 2 as published by the Free Software + * Foundation, and any use by you of this program is subject to the terms + * of such GNU licence. + * + * ARM Mali DP500/DP550/DP650 driver (crtc operations) + */ + +#include <drm/drmP.h> +#include <drm/drm_atomic.h> +#include <drm/drm_atomic_helper.h> +#include <drm/drm_crtc.h> +#include <drm/drm_crtc_helper.h> +#include <linux/clk.h> +#include <video/videomode.h> + +#include "malidp_drv.h" +#include "malidp_hw.h" + +static bool malidp_crtc_mode_fixup(struct drm_crtc *crtc, + const struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + struct malidp_drm *malidp = crtc_to_malidp_device(crtc); + struct malidp_hw_device *hwdev = malidp->dev; + + /* + * check that the hardware can drive the required clock rate, + * but skip the check if the clock is meant to be disabled (req_rate = 0) + */ + long rate, req_rate = mode->crtc_clock * 1000; + + if (req_rate) { + rate = clk_round_rate(hwdev->mclk, req_rate); + if (rate < req_rate) { + DRM_DEBUG_DRIVER("mclk clock unable to reach %d kHz\n", + mode->crtc_clock); + return false; + } + + rate = clk_round_rate(hwdev->pxlclk, req_rate); + if (rate != req_rate) { + DRM_DEBUG_DRIVER("pxlclk doesn't support %ld Hz\n", + req_rate); + return false; + } + } + + return true; +} + +static void malidp_crtc_enable(struct drm_crtc *crtc) +{ + struct malidp_drm *malidp = crtc_to_malidp_device(crtc); + struct malidp_hw_device *hwdev = malidp->dev; + struct videomode vm; + + drm_display_mode_to_videomode(&crtc->state->adjusted_mode, &vm); + + clk_prepare_enable(hwdev->pxlclk); + + /* mclk needs to be set to the same or higher rate than pxlclk */ + clk_set_rate(hwdev->mclk, crtc->state->adjusted_mode.crtc_clock * 1000); + clk_set_rate(hwdev->pxlclk, crtc->state->adjusted_mode.crtc_clock * 1000); + + hwdev->modeset(hwdev, &vm); + hwdev->leave_config_mode(hwdev); + drm_crtc_vblank_on(crtc); +} + +static void malidp_crtc_disable(struct drm_crtc *crtc) +{ + struct malidp_drm *malidp = crtc_to_malidp_device(crtc); + struct malidp_hw_device *hwdev = malidp->dev; + + drm_crtc_vblank_off(crtc); + hwdev->enter_config_mode(hwdev); + clk_disable_unprepare(hwdev->pxlclk); +} + +static int malidp_crtc_atomic_check(struct drm_crtc *crtc, + struct drm_crtc_state *state) +{ + struct malidp_drm *malidp = crtc_to_malidp_device(crtc); + struct malidp_hw_device *hwdev = malidp->dev; + struct drm_plane *plane; + const struct drm_plane_state *pstate; + u32 rot_mem_free, rot_mem_usable; + int rotated_planes = 0; + + /* + * check if there is enough rotation memory available for planes + * that need 90° and 270° rotation. Each plane has set its required + * memory size in the ->plane_check() callback, here we only make + * sure that the sums are less that the total usable memory. + * + * The rotation memory allocation algorithm (for each plane): + * a. If no more rotated planes exist, all remaining rotate + * memory in the bank is available for use by the plane. + * b. If other rotated planes exist, and plane's layer ID is + * DE_VIDEO1, it can use all the memory from first bank if + * secondary rotation memory bank is available, otherwise it can + * use up to half the bank's memory. + * c. If other rotated planes exist, and plane's layer ID is not + * DE_VIDEO1, it can use half of the available memory + * + * Note: this algorithm assumes that the order in which the planes are + * checked always has DE_VIDEO1 plane first in the list if it is + * rotated. Because that is how we create the planes in the first + * place, under current DRM version things work, but if ever the order + * in which drm_atomic_crtc_state_for_each_plane() iterates over planes + * changes, we need to pre-sort the planes before validation. + */ + + /* first count the number of rotated planes */ + drm_atomic_crtc_state_for_each_plane_state(plane, pstate, state) { + if (pstate->rotation & MALIDP_ROTATED_MASK) + rotated_planes++; + } + + rot_mem_free = hwdev->rotation_memory[0]; + /* + * if we have more than 1 plane using rotation memory, use the second + * block of rotation memory as well + */ + if (rotated_planes > 1) + rot_mem_free += hwdev->rotation_memory[1]; + + /* now validate the rotation memory requirements */ + drm_atomic_crtc_state_for_each_plane_state(plane, pstate, state) { + struct malidp_plane *mp = to_malidp_plane(plane); + struct malidp_plane_state *ms = to_malidp_plane_state(pstate); + + if (pstate->rotation & MALIDP_ROTATED_MASK) { + /* process current plane */ + rotated_planes--; + + if (!rotated_planes) { + /* no more rotated planes, we can use what's left */ + rot_mem_usable = rot_mem_free; + } else { + if ((mp->layer->id != DE_VIDEO1) || + (hwdev->rotation_memory[1] == 0)) + rot_mem_usable = rot_mem_free / 2; + else + rot_mem_usable = hwdev->rotation_memory[0]; + } + + rot_mem_free -= rot_mem_usable; + + if (ms->rotmem_size > rot_mem_usable) + return -EINVAL; + } + } + + return 0; +} + +static const struct drm_crtc_helper_funcs malidp_crtc_helper_funcs = { + .mode_fixup = malidp_crtc_mode_fixup, + .enable = malidp_crtc_enable, + .disable = malidp_crtc_disable, + .atomic_check = malidp_crtc_atomic_check, +}; + +static const struct drm_crtc_funcs malidp_crtc_funcs = { + .destroy = drm_crtc_cleanup, + .set_config = drm_atomic_helper_set_config, + .page_flip = drm_atomic_helper_page_flip, + .reset = drm_atomic_helper_crtc_reset, + .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state, +}; + +int malidp_crtc_init(struct drm_device *drm) +{ + struct malidp_drm *malidp = drm->dev_private; + struct drm_plane *primary = NULL, *plane; + int ret; + + ret = malidp_de_planes_init(drm); + if (ret < 0) { + DRM_ERROR("Failed to initialise planes\n"); + return ret; + } + + drm_for_each_plane(plane, drm) { + if (plane->type == DRM_PLANE_TYPE_PRIMARY) { + primary = plane; + break; + } + } + + if (!primary) { + DRM_ERROR("no primary plane found\n"); + ret = -EINVAL; + goto crtc_cleanup_planes; + } + + ret = drm_crtc_init_with_planes(drm, &malidp->crtc, primary, NULL, + &malidp_crtc_funcs, NULL); + + if (!ret) { + drm_crtc_helper_add(&malidp->crtc, &malidp_crtc_helper_funcs); + return 0; + } + +crtc_cleanup_planes: + malidp_de_planes_destroy(drm); + + return ret; +} |