diff options
Diffstat (limited to 'drivers/gpu/drm/drm_mode_object.c')
| -rw-r--r-- | drivers/gpu/drm/drm_mode_object.c | 438 |
1 files changed, 438 insertions, 0 deletions
diff --git a/drivers/gpu/drm/drm_mode_object.c b/drivers/gpu/drm/drm_mode_object.c new file mode 100644 index 000000000000..9f17085b1fdd --- /dev/null +++ b/drivers/gpu/drm/drm_mode_object.c @@ -0,0 +1,438 @@ +/* + * Copyright (c) 2016 Intel Corporation + * + * Permission to use, copy, modify, distribute, and sell this software and its + * documentation for any purpose is hereby granted without fee, provided that + * the above copyright notice appear in all copies and that both that copyright + * notice and this permission notice appear in supporting documentation, and + * that the name of the copyright holders not be used in advertising or + * publicity pertaining to distribution of the software without specific, + * written prior permission. The copyright holders make no representations + * about the suitability of this software for any purpose. It is provided "as + * is" without express or implied warranty. + * + * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, + * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO + * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR + * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, + * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER + * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#include <linux/export.h> +#include <drm/drmP.h> +#include <drm/drm_mode_object.h> + +#include "drm_crtc_internal.h" + +/* + * Internal function to assign a slot in the object idr and optionally + * register the object into the idr. + */ +int drm_mode_object_get_reg(struct drm_device *dev, + struct drm_mode_object *obj, + uint32_t obj_type, + bool register_obj, + void (*obj_free_cb)(struct kref *kref)) +{ + int ret; + + mutex_lock(&dev->mode_config.idr_mutex); + ret = idr_alloc(&dev->mode_config.crtc_idr, register_obj ? obj : NULL, 1, 0, GFP_KERNEL); + if (ret >= 0) { + /* + * Set up the object linking under the protection of the idr + * lock so that other users can't see inconsistent state. + */ + obj->id = ret; + obj->type = obj_type; + if (obj_free_cb) { + obj->free_cb = obj_free_cb; + kref_init(&obj->refcount); + } + } + mutex_unlock(&dev->mode_config.idr_mutex); + + return ret < 0 ? ret : 0; +} + +/** + * drm_mode_object_get - allocate a new modeset identifier + * @dev: DRM device + * @obj: object pointer, used to generate unique ID + * @obj_type: object type + * + * Create a unique identifier based on @ptr in @dev's identifier space. Used + * for tracking modes, CRTCs and connectors. Note that despite the _get postfix + * modeset identifiers are _not_ reference counted. Hence don't use this for + * reference counted modeset objects like framebuffers. + * + * Returns: + * Zero on success, error code on failure. + */ +int drm_mode_object_get(struct drm_device *dev, + struct drm_mode_object *obj, uint32_t obj_type) +{ + return drm_mode_object_get_reg(dev, obj, obj_type, true, NULL); +} + +void drm_mode_object_register(struct drm_device *dev, + struct drm_mode_object *obj) +{ + mutex_lock(&dev->mode_config.idr_mutex); + idr_replace(&dev->mode_config.crtc_idr, obj, obj->id); + mutex_unlock(&dev->mode_config.idr_mutex); +} + +/** + * drm_mode_object_unregister - free a modeset identifer + * @dev: DRM device + * @object: object to free + * + * Free @id from @dev's unique identifier pool. + * This function can be called multiple times, and guards against + * multiple removals. + * These modeset identifiers are _not_ reference counted. Hence don't use this + * for reference counted modeset objects like framebuffers. + */ +void drm_mode_object_unregister(struct drm_device *dev, + struct drm_mode_object *object) +{ + mutex_lock(&dev->mode_config.idr_mutex); + if (object->id) { + idr_remove(&dev->mode_config.crtc_idr, object->id); + object->id = 0; + } + mutex_unlock(&dev->mode_config.idr_mutex); +} + +struct drm_mode_object *__drm_mode_object_find(struct drm_device *dev, + uint32_t id, uint32_t type) +{ + struct drm_mode_object *obj = NULL; + + mutex_lock(&dev->mode_config.idr_mutex); + obj = idr_find(&dev->mode_config.crtc_idr, id); + if (obj && type != DRM_MODE_OBJECT_ANY && obj->type != type) + obj = NULL; + if (obj && obj->id != id) + obj = NULL; + + if (obj && obj->free_cb) { + if (!kref_get_unless_zero(&obj->refcount)) + obj = NULL; + } + mutex_unlock(&dev->mode_config.idr_mutex); + + return obj; +} + +/** + * drm_mode_object_find - look up a drm object with static lifetime + * @dev: drm device + * @id: id of the mode object + * @type: type of the mode object + * + * This function is used to look up a modeset object. It will acquire a + * reference for reference counted objects. This reference must be dropped again + * by callind drm_mode_object_unreference(). + */ +struct drm_mode_object *drm_mode_object_find(struct drm_device *dev, + uint32_t id, uint32_t type) +{ + struct drm_mode_object *obj = NULL; + + obj = __drm_mode_object_find(dev, id, type); + return obj; +} +EXPORT_SYMBOL(drm_mode_object_find); + +/** + * drm_mode_object_unreference - decr the object refcnt + * @obj: mode_object + * + * This function decrements the object's refcount if it is a refcounted modeset + * object. It is a no-op on any other object. This is used to drop references + * acquired with drm_mode_object_reference(). + */ +void drm_mode_object_unreference(struct drm_mode_object *obj) +{ + if (obj->free_cb) { + DRM_DEBUG("OBJ ID: %d (%d)\n", obj->id, atomic_read(&obj->refcount.refcount)); + kref_put(&obj->refcount, obj->free_cb); + } +} +EXPORT_SYMBOL(drm_mode_object_unreference); + +/** + * drm_mode_object_reference - incr the object refcnt + * @obj: mode_object + * + * This function increments the object's refcount if it is a refcounted modeset + * object. It is a no-op on any other object. References should be dropped again + * by calling drm_mode_object_unreference(). + */ +void drm_mode_object_reference(struct drm_mode_object *obj) +{ + if (obj->free_cb) { + DRM_DEBUG("OBJ ID: %d (%d)\n", obj->id, atomic_read(&obj->refcount.refcount)); + kref_get(&obj->refcount); + } +} +EXPORT_SYMBOL(drm_mode_object_reference); + +/** + * drm_object_attach_property - attach a property to a modeset object + * @obj: drm modeset object + * @property: property to attach + * @init_val: initial value of the property + * + * This attaches the given property to the modeset object with the given initial + * value. Currently this function cannot fail since the properties are stored in + * a statically sized array. + */ +void drm_object_attach_property(struct drm_mode_object *obj, + struct drm_property *property, + uint64_t init_val) +{ + int count = obj->properties->count; + + if (count == DRM_OBJECT_MAX_PROPERTY) { + WARN(1, "Failed to attach object property (type: 0x%x). Please " + "increase DRM_OBJECT_MAX_PROPERTY by 1 for each time " + "you see this message on the same object type.\n", + obj->type); + return; + } + + obj->properties->properties[count] = property; + obj->properties->values[count] = init_val; + obj->properties->count++; +} +EXPORT_SYMBOL(drm_object_attach_property); + +/** + * drm_object_property_set_value - set the value of a property + * @obj: drm mode object to set property value for + * @property: property to set + * @val: value the property should be set to + * + * This function sets a given property on a given object. This function only + * changes the software state of the property, it does not call into the + * driver's ->set_property callback. + * + * Note that atomic drivers should not have any need to call this, the core will + * ensure consistency of values reported back to userspace through the + * appropriate ->atomic_get_property callback. Only legacy drivers should call + * this function to update the tracked value (after clamping and other + * restrictions have been applied). + * + * Returns: + * Zero on success, error code on failure. + */ +int drm_object_property_set_value(struct drm_mode_object *obj, + struct drm_property *property, uint64_t val) +{ + int i; + + for (i = 0; i < obj->properties->count; i++) { + if (obj->properties->properties[i] == property) { + obj->properties->values[i] = val; + return 0; + } + } + + return -EINVAL; +} +EXPORT_SYMBOL(drm_object_property_set_value); + +/** + * drm_object_property_get_value - retrieve the value of a property + * @obj: drm mode object to get property value from + * @property: property to retrieve + * @val: storage for the property value + * + * This function retrieves the softare state of the given property for the given + * property. Since there is no driver callback to retrieve the current property + * value this might be out of sync with the hardware, depending upon the driver + * and property. + * + * Atomic drivers should never call this function directly, the core will read + * out property values through the various ->atomic_get_property callbacks. + * + * Returns: + * Zero on success, error code on failure. + */ +int drm_object_property_get_value(struct drm_mode_object *obj, + struct drm_property *property, uint64_t *val) +{ + int i; + + /* read-only properties bypass atomic mechanism and still store + * their value in obj->properties->values[].. mostly to avoid + * having to deal w/ EDID and similar props in atomic paths: + */ + if (drm_core_check_feature(property->dev, DRIVER_ATOMIC) && + !(property->flags & DRM_MODE_PROP_IMMUTABLE)) + return drm_atomic_get_property(obj, property, val); + + for (i = 0; i < obj->properties->count; i++) { + if (obj->properties->properties[i] == property) { + *val = obj->properties->values[i]; + return 0; + } + + } + + return -EINVAL; +} +EXPORT_SYMBOL(drm_object_property_get_value); + +/* helper for getconnector and getproperties ioctls */ +int drm_mode_object_get_properties(struct drm_mode_object *obj, bool atomic, + uint32_t __user *prop_ptr, + uint64_t __user *prop_values, + uint32_t *arg_count_props) +{ + int i, ret, count; + + for (i = 0, count = 0; i < obj->properties->count; i++) { + struct drm_property *prop = obj->properties->properties[i]; + uint64_t val; + + if ((prop->flags & DRM_MODE_PROP_ATOMIC) && !atomic) + continue; + + if (*arg_count_props > count) { + ret = drm_object_property_get_value(obj, prop, &val); + if (ret) + return ret; + + if (put_user(prop->base.id, prop_ptr + count)) + return -EFAULT; + + if (put_user(val, prop_values + count)) + return -EFAULT; + } + + count++; + } + *arg_count_props = count; + + return 0; +} + +/** + * drm_mode_obj_get_properties_ioctl - get the current value of a object's property + * @dev: DRM device + * @data: ioctl data + * @file_priv: DRM file info + * + * This function retrieves the current value for an object's property. Compared + * to the connector specific ioctl this one is extended to also work on crtc and + * plane objects. + * + * Called by the user via ioctl. + * + * Returns: + * Zero on success, negative errno on failure. + */ +int drm_mode_obj_get_properties_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + struct drm_mode_obj_get_properties *arg = data; + struct drm_mode_object *obj; + int ret = 0; + + if (!drm_core_check_feature(dev, DRIVER_MODESET)) + return -EINVAL; + + drm_modeset_lock_all(dev); + + obj = drm_mode_object_find(dev, arg->obj_id, arg->obj_type); + if (!obj) { + ret = -ENOENT; + goto out; + } + if (!obj->properties) { + ret = -EINVAL; + goto out_unref; + } + + ret = drm_mode_object_get_properties(obj, file_priv->atomic, + (uint32_t __user *)(unsigned long)(arg->props_ptr), + (uint64_t __user *)(unsigned long)(arg->prop_values_ptr), + &arg->count_props); + +out_unref: + drm_mode_object_unreference(obj); +out: + drm_modeset_unlock_all(dev); + return ret; +} + +struct drm_property *drm_mode_obj_find_prop_id(struct drm_mode_object *obj, + uint32_t prop_id) +{ + int i; + + for (i = 0; i < obj->properties->count; i++) + if (obj->properties->properties[i]->base.id == prop_id) + return obj->properties->properties[i]; + + return NULL; +} + +int drm_mode_obj_set_property_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + struct drm_mode_obj_set_property *arg = data; + struct drm_mode_object *arg_obj; + struct drm_property *property; + int ret = -EINVAL; + struct drm_mode_object *ref; + + if (!drm_core_check_feature(dev, DRIVER_MODESET)) + return -EINVAL; + + drm_modeset_lock_all(dev); + + arg_obj = drm_mode_object_find(dev, arg->obj_id, arg->obj_type); + if (!arg_obj) { + ret = -ENOENT; + goto out; + } + + if (!arg_obj->properties) + goto out_unref; + + property = drm_mode_obj_find_prop_id(arg_obj, arg->prop_id); + if (!property) + goto out_unref; + + if (!drm_property_change_valid_get(property, arg->value, &ref)) + goto out_unref; + + switch (arg_obj->type) { + case DRM_MODE_OBJECT_CONNECTOR: + ret = drm_mode_connector_set_obj_prop(arg_obj, property, + arg->value); + break; + case DRM_MODE_OBJECT_CRTC: + ret = drm_mode_crtc_set_obj_prop(arg_obj, property, arg->value); + break; + case DRM_MODE_OBJECT_PLANE: + ret = drm_mode_plane_set_obj_prop(obj_to_plane(arg_obj), + property, arg->value); + break; + } + + drm_property_change_valid_put(property, ref); + +out_unref: + drm_mode_object_unreference(arg_obj); +out: + drm_modeset_unlock_all(dev); + return ret; +} |