diff options
Diffstat (limited to 'drivers/gpu/drm/i915/intel_dp.c')
| -rw-r--r-- | drivers/gpu/drm/i915/intel_dp.c | 581 |
1 files changed, 524 insertions, 57 deletions
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 2a00cb828d20..52fda950fd2a 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -64,6 +64,24 @@ static const struct dp_link_dpll vlv_dpll[] = { { .p1 = 2, .p2 = 2, .n = 1, .m1 = 2, .m2 = 27 } } }; +/* + * CHV supports eDP 1.4 that have more link rates. + * Below only provides the fixed rate but exclude variable rate. + */ +static const struct dp_link_dpll chv_dpll[] = { + /* + * CHV requires to program fractional division for m2. + * m2 is stored in fixed point format using formula below + * (m2_int << 22) | m2_fraction + */ + { DP_LINK_BW_1_62, /* m2_int = 32, m2_fraction = 1677722 */ + { .p1 = 4, .p2 = 2, .n = 1, .m1 = 2, .m2 = 0x819999a } }, + { DP_LINK_BW_2_7, /* m2_int = 27, m2_fraction = 0 */ + { .p1 = 4, .p2 = 1, .n = 1, .m1 = 2, .m2 = 0x6c00000 } }, + { DP_LINK_BW_5_4, /* m2_int = 27, m2_fraction = 0 */ + { .p1 = 2, .p2 = 1, .n = 1, .m1 = 2, .m2 = 0x6c00000 } } +}; + /** * is_edp - is the given port attached to an eDP panel (either CPU or PCH) * @intel_dp: DP struct @@ -330,8 +348,12 @@ static bool edp_have_panel_vdd(struct intel_dp *intel_dp) { struct drm_device *dev = intel_dp_to_dev(intel_dp); struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); + struct intel_encoder *intel_encoder = &intel_dig_port->base; + enum intel_display_power_domain power_domain; - return !dev_priv->pm.suspended && + power_domain = intel_display_port_power_domain(intel_encoder); + return intel_display_power_enabled(dev_priv, power_domain) && (I915_READ(_pp_ctrl_reg(intel_dp)) & EDP_FORCE_VDD) != 0; } @@ -697,9 +719,9 @@ intel_dp_aux_init(struct intel_dp *intel_dp, struct intel_connector *connector) DRM_DEBUG_KMS("registering %s bus for %s\n", name, connector->base.kdev->kobj.name); - ret = drm_dp_aux_register_i2c_bus(&intel_dp->aux); + ret = drm_dp_aux_register(&intel_dp->aux); if (ret < 0) { - DRM_ERROR("drm_dp_aux_register_i2c_bus() for %s failed (%d)\n", + DRM_ERROR("drm_dp_aux_register() for %s failed (%d)\n", name, ret); return; } @@ -709,7 +731,7 @@ intel_dp_aux_init(struct intel_dp *intel_dp, struct intel_connector *connector) intel_dp->aux.ddc.dev.kobj.name); if (ret < 0) { DRM_ERROR("sysfs_create_link() for %s failed (%d)\n", name, ret); - drm_dp_aux_unregister_i2c_bus(&intel_dp->aux); + drm_dp_aux_unregister(&intel_dp->aux); } } @@ -739,6 +761,9 @@ intel_dp_set_clock(struct intel_encoder *encoder, } else if (HAS_PCH_SPLIT(dev)) { divisor = pch_dpll; count = ARRAY_SIZE(pch_dpll); + } else if (IS_CHERRYVIEW(dev)) { + divisor = chv_dpll; + count = ARRAY_SIZE(chv_dpll); } else if (IS_VALLEYVIEW(dev)) { divisor = vlv_dpll; count = ARRAY_SIZE(vlv_dpll); @@ -755,6 +780,20 @@ intel_dp_set_clock(struct intel_encoder *encoder, } } +static void +intel_dp_set_m2_n2(struct intel_crtc *crtc, struct intel_link_m_n *m_n) +{ + struct drm_device *dev = crtc->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + enum transcoder transcoder = crtc->config.cpu_transcoder; + + I915_WRITE(PIPE_DATA_M2(transcoder), + TU_SIZE(m_n->tu) | m_n->gmch_m); + I915_WRITE(PIPE_DATA_N2(transcoder), m_n->gmch_n); + I915_WRITE(PIPE_LINK_M2(transcoder), m_n->link_m); + I915_WRITE(PIPE_LINK_N2(transcoder), m_n->link_n); +} + bool intel_dp_compute_config(struct intel_encoder *encoder, struct intel_crtc_config *pipe_config) @@ -780,6 +819,7 @@ intel_dp_compute_config(struct intel_encoder *encoder, pipe_config->has_pch_encoder = true; pipe_config->has_dp_encoder = true; + pipe_config->has_audio = intel_dp->has_audio; if (is_edp(intel_dp) && intel_connector->panel.fixed_mode) { intel_fixed_panel_mode(intel_connector->panel.fixed_mode, @@ -880,6 +920,14 @@ found: pipe_config->port_clock, &pipe_config->dp_m_n); + if (intel_connector->panel.downclock_mode != NULL && + intel_dp->drrs_state.type == SEAMLESS_DRRS_SUPPORT) { + intel_link_compute_m_n(bpp, lane_count, + intel_connector->panel.downclock_mode->clock, + pipe_config->port_clock, + &pipe_config->dp_m2_n2); + } + intel_dp_set_clock(encoder, pipe_config, intel_dp->link_bw); return true; @@ -915,7 +963,7 @@ static void ironlake_set_pll_cpu_edp(struct intel_dp *intel_dp) udelay(500); } -static void intel_dp_mode_set(struct intel_encoder *encoder) +static void intel_dp_prepare(struct intel_encoder *encoder) { struct drm_device *dev = encoder->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; @@ -950,7 +998,7 @@ static void intel_dp_mode_set(struct intel_encoder *encoder) intel_dp->DP |= DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0; intel_dp->DP |= DP_PORT_WIDTH(intel_dp->lane_count); - if (intel_dp->has_audio) { + if (crtc->config.has_audio) { DRM_DEBUG_DRIVER("Enabling DP audio on pipe %c\n", pipe_name(crtc->pipe)); intel_dp->DP |= DP_AUDIO_OUTPUT_ENABLE; @@ -983,14 +1031,15 @@ static void intel_dp_mode_set(struct intel_encoder *encoder) if (drm_dp_enhanced_frame_cap(intel_dp->dpcd)) intel_dp->DP |= DP_ENHANCED_FRAMING; - if (crtc->pipe == 1) - intel_dp->DP |= DP_PIPEB_SELECT; + if (!IS_CHERRYVIEW(dev)) { + if (crtc->pipe == 1) + intel_dp->DP |= DP_PIPEB_SELECT; + } else { + intel_dp->DP |= DP_PIPE_SELECT_CHV(crtc->pipe); + } } else { intel_dp->DP |= DP_LINK_TRAIN_OFF_CPT; } - - if (port == PORT_A && !IS_VALLEYVIEW(dev)) - ironlake_set_pll_cpu_edp(intel_dp); } #define IDLE_ON_MASK (PP_ON | PP_SEQUENCE_MASK | 0 | PP_SEQUENCE_STATE_MASK) @@ -1082,7 +1131,10 @@ static u32 ironlake_get_pp_control(struct intel_dp *intel_dp) static bool _edp_panel_vdd_on(struct intel_dp *intel_dp) { struct drm_device *dev = intel_dp_to_dev(intel_dp); + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); + struct intel_encoder *intel_encoder = &intel_dig_port->base; struct drm_i915_private *dev_priv = dev->dev_private; + enum intel_display_power_domain power_domain; u32 pp; u32 pp_stat_reg, pp_ctrl_reg; bool need_to_disable = !intel_dp->want_panel_vdd; @@ -1095,7 +1147,8 @@ static bool _edp_panel_vdd_on(struct intel_dp *intel_dp) if (edp_have_panel_vdd(intel_dp)) return need_to_disable; - intel_runtime_pm_get(dev_priv); + power_domain = intel_display_port_power_domain(intel_encoder); + intel_display_power_get(dev_priv, power_domain); DRM_DEBUG_KMS("Turning eDP VDD on\n"); @@ -1139,9 +1192,14 @@ static void edp_panel_vdd_off_sync(struct intel_dp *intel_dp) u32 pp; u32 pp_stat_reg, pp_ctrl_reg; - WARN_ON(!mutex_is_locked(&dev->mode_config.mutex)); + WARN_ON(!drm_modeset_is_locked(&dev->mode_config.connection_mutex)); if (!intel_dp->want_panel_vdd && edp_have_panel_vdd(intel_dp)) { + struct intel_digital_port *intel_dig_port = + dp_to_dig_port(intel_dp); + struct intel_encoder *intel_encoder = &intel_dig_port->base; + enum intel_display_power_domain power_domain; + DRM_DEBUG_KMS("Turning eDP VDD off\n"); pp = ironlake_get_pp_control(intel_dp); @@ -1160,7 +1218,8 @@ static void edp_panel_vdd_off_sync(struct intel_dp *intel_dp) if ((pp & POWER_TARGET_ON) == 0) intel_dp->last_power_cycle = jiffies; - intel_runtime_pm_put(dev_priv); + power_domain = intel_display_port_power_domain(intel_encoder); + intel_display_power_put(dev_priv, power_domain); } } @@ -1170,9 +1229,9 @@ static void edp_panel_vdd_work(struct work_struct *__work) struct intel_dp, panel_vdd_work); struct drm_device *dev = intel_dp_to_dev(intel_dp); - mutex_lock(&dev->mode_config.mutex); + drm_modeset_lock(&dev->mode_config.connection_mutex, NULL); edp_panel_vdd_off_sync(intel_dp); - mutex_unlock(&dev->mode_config.mutex); + drm_modeset_unlock(&dev->mode_config.connection_mutex); } static void edp_panel_vdd_off(struct intel_dp *intel_dp, bool sync) @@ -1244,8 +1303,11 @@ void intel_edp_panel_on(struct intel_dp *intel_dp) void intel_edp_panel_off(struct intel_dp *intel_dp) { + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); + struct intel_encoder *intel_encoder = &intel_dig_port->base; struct drm_device *dev = intel_dp_to_dev(intel_dp); struct drm_i915_private *dev_priv = dev->dev_private; + enum intel_display_power_domain power_domain; u32 pp; u32 pp_ctrl_reg; @@ -1275,7 +1337,8 @@ void intel_edp_panel_off(struct intel_dp *intel_dp) wait_panel_off(intel_dp); /* We got a reference when we enabled the VDD. */ - intel_runtime_pm_put(dev_priv); + power_domain = intel_display_port_power_domain(intel_encoder); + intel_display_power_put(dev_priv, power_domain); } void intel_edp_backlight_on(struct intel_dp *intel_dp) @@ -1432,6 +1495,8 @@ static bool intel_dp_get_hw_state(struct intel_encoder *encoder, if (port == PORT_A && IS_GEN7(dev) && !IS_VALLEYVIEW(dev)) { *pipe = PORT_TO_PIPE_CPT(tmp); + } else if (IS_CHERRYVIEW(dev)) { + *pipe = DP_PORT_TO_PIPE_CHV(tmp); } else if (!HAS_PCH_CPT(dev) || port == PORT_A) { *pipe = PORT_TO_PIPE(tmp); } else { @@ -1479,8 +1544,11 @@ static void intel_dp_get_config(struct intel_encoder *encoder, struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc); int dotclock; + tmp = I915_READ(intel_dp->output_reg); + if (tmp & DP_AUDIO_OUTPUT_ENABLE) + pipe_config->has_audio = true; + if ((port == PORT_A) || !HAS_PCH_CPT(dev)) { - tmp = I915_READ(intel_dp->output_reg); if (tmp & DP_SYNC_HS_HIGH) flags |= DRM_MODE_FLAG_PHSYNC; else @@ -1816,17 +1884,59 @@ static void intel_disable_dp(struct intel_encoder *encoder) intel_dp_link_down(intel_dp); } -static void intel_post_disable_dp(struct intel_encoder *encoder) +static void g4x_post_disable_dp(struct intel_encoder *encoder) { struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); enum port port = dp_to_dig_port(intel_dp)->port; + + if (port != PORT_A) + return; + + intel_dp_link_down(intel_dp); + ironlake_edp_pll_off(intel_dp); +} + +static void vlv_post_disable_dp(struct intel_encoder *encoder) +{ + struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); + + intel_dp_link_down(intel_dp); +} + +static void chv_post_disable_dp(struct intel_encoder *encoder) +{ + struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); + struct intel_digital_port *dport = dp_to_dig_port(intel_dp); struct drm_device *dev = encoder->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = + to_intel_crtc(encoder->base.crtc); + enum dpio_channel ch = vlv_dport_to_channel(dport); + enum pipe pipe = intel_crtc->pipe; + u32 val; - if (port == PORT_A || IS_VALLEYVIEW(dev)) { - intel_dp_link_down(intel_dp); - if (!IS_VALLEYVIEW(dev)) - ironlake_edp_pll_off(intel_dp); - } + intel_dp_link_down(intel_dp); + + mutex_lock(&dev_priv->dpio_lock); + + /* Propagate soft reset to data lane reset */ + val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW1(ch)); + val |= CHV_PCS_REQ_SOFTRESET_EN; + vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW1(ch), val); + + val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW1(ch)); + val |= CHV_PCS_REQ_SOFTRESET_EN; + vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW1(ch), val); + + val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW0(ch)); + val &= ~(DPIO_PCS_TX_LANE2_RESET | DPIO_PCS_TX_LANE1_RESET); + vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW0(ch), val); + + val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW0(ch)); + val &= ~(DPIO_PCS_TX_LANE2_RESET | DPIO_PCS_TX_LANE1_RESET); + vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW0(ch), val); + + mutex_unlock(&dev_priv->dpio_lock); } static void intel_enable_dp(struct intel_encoder *encoder) @@ -1868,8 +1978,13 @@ static void g4x_pre_enable_dp(struct intel_encoder *encoder) struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); struct intel_digital_port *dport = dp_to_dig_port(intel_dp); - if (dport->port == PORT_A) + intel_dp_prepare(encoder); + + /* Only ilk+ has port A */ + if (dport->port == PORT_A) { + ironlake_set_pll_cpu_edp(intel_dp); ironlake_edp_pll_on(intel_dp); + } } static void vlv_pre_enable_dp(struct intel_encoder *encoder) @@ -1921,6 +2036,8 @@ static void vlv_dp_pre_pll_enable(struct intel_encoder *encoder) enum dpio_channel port = vlv_dport_to_channel(dport); int pipe = intel_crtc->pipe; + intel_dp_prepare(encoder); + /* Program Tx lane resets to default */ mutex_lock(&dev_priv->dpio_lock); vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW0(port), @@ -1939,6 +2056,69 @@ static void vlv_dp_pre_pll_enable(struct intel_encoder *encoder) mutex_unlock(&dev_priv->dpio_lock); } +static void chv_pre_enable_dp(struct intel_encoder *encoder) +{ + struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); + struct intel_digital_port *dport = dp_to_dig_port(intel_dp); + struct drm_device *dev = encoder->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct edp_power_seq power_seq; + struct intel_crtc *intel_crtc = + to_intel_crtc(encoder->base.crtc); + enum dpio_channel ch = vlv_dport_to_channel(dport); + int pipe = intel_crtc->pipe; + int data, i; + u32 val; + + mutex_lock(&dev_priv->dpio_lock); + + /* Deassert soft data lane reset*/ + val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW1(ch)); + val |= CHV_PCS_REQ_SOFTRESET_EN; + vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW1(ch), val); + + val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW1(ch)); + val |= CHV_PCS_REQ_SOFTRESET_EN; + vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW1(ch), val); + + val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW0(ch)); + val |= (DPIO_PCS_TX_LANE2_RESET | DPIO_PCS_TX_LANE1_RESET); + vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW0(ch), val); + + val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW0(ch)); + val |= (DPIO_PCS_TX_LANE2_RESET | DPIO_PCS_TX_LANE1_RESET); + vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW0(ch), val); + + /* Program Tx lane latency optimal setting*/ + for (i = 0; i < 4; i++) { + /* Set the latency optimal bit */ + data = (i == 1) ? 0x0 : 0x6; + vlv_dpio_write(dev_priv, pipe, CHV_TX_DW11(ch, i), + data << DPIO_FRC_LATENCY_SHFIT); + + /* Set the upar bit */ + data = (i == 1) ? 0x0 : 0x1; + vlv_dpio_write(dev_priv, pipe, CHV_TX_DW14(ch, i), + data << DPIO_UPAR_SHIFT); + } + + /* Data lane stagger programming */ + /* FIXME: Fix up value only after power analysis */ + + mutex_unlock(&dev_priv->dpio_lock); + + if (is_edp(intel_dp)) { + /* init power sequencer on this pipe and port */ + intel_dp_init_panel_power_sequencer(dev, intel_dp, &power_seq); + intel_dp_init_panel_power_sequencer_registers(dev, intel_dp, + &power_seq); + } + + intel_enable_dp(encoder); + + vlv_wait_port_ready(dev_priv, dport); +} + /* * Native read with retry for link status and receiver capability reads for * cases where the sink may still be asleep. @@ -2163,6 +2343,166 @@ static uint32_t intel_vlv_signal_levels(struct intel_dp *intel_dp) return 0; } +static uint32_t intel_chv_signal_levels(struct intel_dp *intel_dp) +{ + struct drm_device *dev = intel_dp_to_dev(intel_dp); + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_digital_port *dport = dp_to_dig_port(intel_dp); + struct intel_crtc *intel_crtc = to_intel_crtc(dport->base.base.crtc); + u32 deemph_reg_value, margin_reg_value, val; + uint8_t train_set = intel_dp->train_set[0]; + enum dpio_channel ch = vlv_dport_to_channel(dport); + enum pipe pipe = intel_crtc->pipe; + int i; + + switch (train_set & DP_TRAIN_PRE_EMPHASIS_MASK) { + case DP_TRAIN_PRE_EMPHASIS_0: + switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) { + case DP_TRAIN_VOLTAGE_SWING_400: + deemph_reg_value = 128; + margin_reg_value = 52; + break; + case DP_TRAIN_VOLTAGE_SWING_600: + deemph_reg_value = 128; + margin_reg_value = 77; + break; + case DP_TRAIN_VOLTAGE_SWING_800: + deemph_reg_value = 128; + margin_reg_value = 102; + break; + case DP_TRAIN_VOLTAGE_SWING_1200: + deemph_reg_value = 128; + margin_reg_value = 154; + /* FIXME extra to set for 1200 */ + break; + default: + return 0; + } + break; + case DP_TRAIN_PRE_EMPHASIS_3_5: + switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) { + case DP_TRAIN_VOLTAGE_SWING_400: + deemph_reg_value = 85; + margin_reg_value = 78; + break; + case DP_TRAIN_VOLTAGE_SWING_600: + deemph_reg_value = 85; + margin_reg_value = 116; + break; + case DP_TRAIN_VOLTAGE_SWING_800: + deemph_reg_value = 85; + margin_reg_value = 154; + break; + default: + return 0; + } + break; + case DP_TRAIN_PRE_EMPHASIS_6: + switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) { + case DP_TRAIN_VOLTAGE_SWING_400: + deemph_reg_value = 64; + margin_reg_value = 104; + break; + case DP_TRAIN_VOLTAGE_SWING_600: + deemph_reg_value = 64; + margin_reg_value = 154; + break; + default: + return 0; + } + break; + case DP_TRAIN_PRE_EMPHASIS_9_5: + switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) { + case DP_TRAIN_VOLTAGE_SWING_400: + deemph_reg_value = 43; + margin_reg_value = 154; + break; + default: + return 0; + } + break; + default: + return 0; + } + + mutex_lock(&dev_priv->dpio_lock); + + /* Clear calc init */ + val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW10(ch)); + val &= ~(DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3); + vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW10(ch), val); + + val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW10(ch)); + val &= ~(DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3); + vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW10(ch), val); + + /* Program swing deemph */ + for (i = 0; i < 4; i++) { + val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW4(ch, i)); + val &= ~DPIO_SWING_DEEMPH9P5_MASK; + val |= deemph_reg_value << DPIO_SWING_DEEMPH9P5_SHIFT; + vlv_dpio_write(dev_priv, pipe, CHV_TX_DW4(ch, i), val); + } + + /* Program swing margin */ + for (i = 0; i < 4; i++) { + val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW2(ch, i)); + val &= ~DPIO_SWING_MARGIN_MASK; + val |= margin_reg_value << DPIO_SWING_MARGIN_SHIFT; + vlv_dpio_write(dev_priv, pipe, CHV_TX_DW2(ch, i), val); + } + + /* Disable unique transition scale */ + for (i = 0; i < 4; i++) { + val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW3(ch, i)); + val &= ~DPIO_TX_UNIQ_TRANS_SCALE_EN; + vlv_dpio_write(dev_priv, pipe, CHV_TX_DW3(ch, i), val); + } + + if (((train_set & DP_TRAIN_PRE_EMPHASIS_MASK) + == DP_TRAIN_PRE_EMPHASIS_0) && + ((train_set & DP_TRAIN_VOLTAGE_SWING_MASK) + == DP_TRAIN_VOLTAGE_SWING_1200)) { + + /* + * The document said it needs to set bit 27 for ch0 and bit 26 + * for ch1. Might be a typo in the doc. + * For now, for this unique transition scale selection, set bit + * 27 for ch0 and ch1. + */ + for (i = 0; i < 4; i++) { + val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW3(ch, i)); + val |= DPIO_TX_UNIQ_TRANS_SCALE_EN; + vlv_dpio_write(dev_priv, pipe, CHV_TX_DW3(ch, i), val); + } + + for (i = 0; i < 4; i++) { + val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW2(ch, i)); + val &= ~(0xff << DPIO_UNIQ_TRANS_SCALE_SHIFT); + val |= (0x9a << DPIO_UNIQ_TRANS_SCALE_SHIFT); + vlv_dpio_write(dev_priv, pipe, CHV_TX_DW2(ch, i), val); + } + } + + /* Start swing calculation */ + val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW10(ch)); + val |= DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3; + vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW10(ch), val); + + val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW10(ch)); + val |= DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3; + vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW10(ch), val); + + /* LRC Bypass */ + val = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW30); + val |= DPIO_LRC_BYPASS; + vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW30, val); + + mutex_unlock(&dev_priv->dpio_lock); + + return 0; +} + static void intel_get_adjust_train(struct intel_dp *intel_dp, const uint8_t link_status[DP_LINK_STATUS_SIZE]) @@ -2377,6 +2717,9 @@ intel_dp_set_signal_levels(struct intel_dp *intel_dp, uint32_t *DP) } else if (IS_HASWELL(dev)) { signal_levels = intel_hsw_signal_levels(train_set); mask = DDI_BUF_EMP_MASK; + } else if (IS_CHERRYVIEW(dev)) { + signal_levels = intel_chv_signal_levels(intel_dp); + mask = 0; } else if (IS_VALLEYVIEW(dev)) { signal_levels = intel_vlv_signal_levels(intel_dp); mask = 0; @@ -2743,22 +3086,7 @@ intel_dp_link_down(struct intel_dp *intel_dp) to_intel_crtc(intel_dig_port->base.base.crtc); uint32_t DP = intel_dp->DP; - /* - * DDI code has a strict mode set sequence and we should try to respect - * it, otherwise we might hang the machine in many different ways. So we - * really should be disabling the port only on a complete crtc_disable - * sequence. This function is just called under two conditions on DDI - * code: - * - Link train failed while doing crtc_enable, and on this case we - * really should respect the mode set sequence and wait for a - * crtc_disable. - * - Someone turned the monitor off and intel_dp_check_link_status - * called us. We don't need to disable the whole port on this case, so - * when someone turns the monitor on again, - * intel_ddi_prepare_link_retrain will take care of redoing the link - * train. - */ - if (HAS_DDI(dev)) + if (WARN_ON(HAS_DDI(dev))) return; if (WARN_ON((I915_READ(intel_dp->output_reg) & DP_PORT_EN) == 0)) @@ -2775,9 +3103,6 @@ intel_dp_link_down(struct intel_dp *intel_dp) } POSTING_READ(intel_dp->output_reg); - /* We don't really know why we're doing this */ - intel_wait_for_vblank(dev, intel_crtc->pipe); - if (HAS_PCH_IBX(dev) && I915_READ(intel_dp->output_reg) & DP_PIPEB_SELECT) { struct drm_crtc *crtc = intel_dig_port->base.base.crtc; @@ -2948,6 +3273,7 @@ intel_dp_check_link_status(struct intel_dp *intel_dp) u8 sink_irq_vector; u8 link_status[DP_LINK_STATUS_SIZE]; + /* FIXME: This access isn't protected by any locks. */ if (!intel_encoder->connectors_active) return; @@ -2980,7 +3306,7 @@ intel_dp_check_link_status(struct intel_dp *intel_dp) if (!drm_dp_channel_eq_ok(link_status, intel_dp->lane_count)) { DRM_DEBUG_KMS("%s: channel EQ not ok, retraining\n", - drm_get_encoder_name(&intel_encoder->base)); + intel_encoder->base.name); intel_dp_start_link_train(intel_dp); intel_dp_complete_link_train(intel_dp); intel_dp_stop_link_train(intel_dp); @@ -3166,7 +3492,7 @@ intel_dp_detect(struct drm_connector *connector, bool force) intel_display_power_get(dev_priv, power_domain); DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n", - connector->base.id, drm_get_connector_name(connector)); + connector->base.id, connector->name); intel_dp->has_audio = false; @@ -3374,13 +3700,13 @@ void intel_dp_encoder_destroy(struct drm_encoder *encoder) struct intel_dp *intel_dp = &intel_dig_port->dp; struct drm_device *dev = intel_dp_to_dev(intel_dp); - drm_dp_aux_unregister_i2c_bus(&intel_dp->aux); + drm_dp_aux_unregister(&intel_dp->aux); drm_encoder_cleanup(encoder); if (is_edp(intel_dp)) { cancel_delayed_work_sync(&intel_dp->panel_vdd_work); - mutex_lock(&dev->mode_config.mutex); + drm_modeset_lock(&dev->mode_config.connection_mutex, NULL); edp_panel_vdd_off_sync(intel_dp); - mutex_unlock(&dev->mode_config.mutex); + drm_modeset_unlock(&dev->mode_config.connection_mutex); } kfree(intel_dig_port); } @@ -3651,6 +3977,130 @@ intel_dp_init_panel_power_sequencer_registers(struct drm_device *dev, I915_READ(pp_div_reg)); } +void intel_dp_set_drrs_state(struct drm_device *dev, int refresh_rate) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_encoder *encoder; + struct intel_dp *intel_dp = NULL; + struct intel_crtc_config *config = NULL; + struct intel_crtc *intel_crtc = NULL; + struct intel_connector *intel_connector = dev_priv->drrs.connector; + u32 reg, val; + enum edp_drrs_refresh_rate_type index = DRRS_HIGH_RR; + + if (refresh_rate <= 0) { + DRM_DEBUG_KMS("Refresh rate should be positive non-zero.\n"); + return; + } + + if (intel_connector == NULL) { + DRM_DEBUG_KMS("DRRS supported for eDP only.\n"); + return; + } + + if (INTEL_INFO(dev)->gen < 8 && intel_edp_is_psr_enabled(dev)) { + DRM_DEBUG_KMS("DRRS is disabled as PSR is enabled\n"); + return; + } + + encoder = intel_attached_encoder(&intel_connector->base); + intel_dp = enc_to_intel_dp(&encoder->base); + intel_crtc = encoder->new_crtc; + + if (!intel_crtc) { + DRM_DEBUG_KMS("DRRS: intel_crtc not initialized\n"); + return; + } + + config = &intel_crtc->config; + + if (intel_dp->drrs_state.type < SEAMLESS_DRRS_SUPPORT) { + DRM_DEBUG_KMS("Only Seamless DRRS supported.\n"); + return; + } + + if (intel_connector->panel.downclock_mode->vrefresh == refresh_rate) + index = DRRS_LOW_RR; + + if (index == intel_dp->drrs_state.refresh_rate_type) { + DRM_DEBUG_KMS( + "DRRS requested for previously set RR...ignoring\n"); + return; + } + + if (!intel_crtc->active) { + DRM_DEBUG_KMS("eDP encoder disabled. CRTC not Active\n"); + return; + } + + if (INTEL_INFO(dev)->gen > 6 && INTEL_INFO(dev)->gen < 8) { + reg = PIPECONF(intel_crtc->config.cpu_transcoder); + val = I915_READ(reg); + if (index > DRRS_HIGH_RR) { + val |= PIPECONF_EDP_RR_MODE_SWITCH; + intel_dp_set_m2_n2(intel_crtc, &config->dp_m2_n2); + } else { + val &= ~PIPECONF_EDP_RR_MODE_SWITCH; + } + I915_WRITE(reg, val); + } + + /* + * mutex taken to ensure that there is no race between differnt + * drrs calls trying to update refresh rate. This scenario may occur + * in future when idleness detection based DRRS in kernel and + * possible calls from user space to set differnt RR are made. + */ + + mutex_lock(&intel_dp->drrs_state.mutex); + + intel_dp->drrs_state.refresh_rate_type = index; + + mutex_unlock(&intel_dp->drrs_state.mutex); + + DRM_DEBUG_KMS("eDP Refresh Rate set to : %dHz\n", refresh_rate); +} + +static struct drm_display_mode * +intel_dp_drrs_init(struct intel_digital_port *intel_dig_port, + struct intel_connector *intel_connector, + struct drm_display_mode *fixed_mode) +{ + struct drm_connector *connector = &intel_connector->base; + struct intel_dp *intel_dp = &intel_dig_port->dp; + struct drm_device *dev = intel_dig_port->base.base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct drm_display_mode *downclock_mode = NULL; + + if (INTEL_INFO(dev)->gen <= 6) { + DRM_DEBUG_KMS("DRRS supported for Gen7 and above\n"); + return NULL; + } + + if (dev_priv->vbt.drrs_type != SEAMLESS_DRRS_SUPPORT) { + DRM_INFO("VBT doesn't support DRRS\n"); + return NULL; + } + + downclock_mode = intel_find_panel_downclock + (dev, fixed_mode, connector); + + if (!downclock_mode) { + DRM_INFO("DRRS not supported\n"); + return NULL; + } + + dev_priv->drrs.connector = intel_connector; + + mutex_init(&intel_dp->drrs_state.mutex); + + intel_dp->drrs_state.type = dev_priv->vbt.drrs_type; + + intel_dp->drrs_state.refresh_rate_type = DRRS_HIGH_RR; + DRM_INFO("seamless DRRS supported for eDP panel.\n"); + return downclock_mode; +} + static bool intel_edp_init_connector(struct intel_dp *intel_dp, struct intel_connector *intel_connector, struct edp_power_seq *power_seq) @@ -3661,10 +4111,13 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp, struct drm_device *dev = intel_encoder->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; struct drm_display_mode *fixed_mode = NULL; + struct drm_display_mode *downclock_mode = NULL; bool has_dpcd; struct drm_display_mode *scan; struct edid *edid; + intel_dp->drrs_state.type = DRRS_NOT_SUPPORTED; + if (!is_edp(intel_dp)) return true; @@ -3715,6 +4168,9 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp, list_for_each_entry(scan, &connector->probed_modes, head) { if ((scan->type & DRM_MODE_TYPE_PREFERRED)) { fixed_mode = drm_mode_duplicate(dev, scan); + downclock_mode = intel_dp_drrs_init( + intel_dig_port, + intel_connector, fixed_mode); break; } } @@ -3728,7 +4184,7 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp, } mutex_unlock(&dev->mode_config.mutex); - intel_panel_init(&intel_connector->panel, fixed_mode, NULL); + intel_panel_init(&intel_connector->panel, fixed_mode, downclock_mode); intel_panel_setup_backlight(connector); return true; @@ -3826,12 +4282,12 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port, intel_dp->psr_setup_done = false; if (!intel_edp_init_connector(intel_dp, intel_connector, &power_seq)) { - drm_dp_aux_unregister_i2c_bus(&intel_dp->aux); + drm_dp_aux_unregister(&intel_dp->aux); if (is_edp(intel_dp)) { cancel_delayed_work_sync(&intel_dp->panel_vdd_work); - mutex_lock(&dev->mode_config.mutex); + drm_modeset_lock(&dev->mode_config.connection_mutex, NULL); edp_panel_vdd_off_sync(intel_dp); - mutex_unlock(&dev->mode_config.mutex); + drm_modeset_unlock(&dev->mode_config.connection_mutex); } drm_sysfs_connector_remove(connector); drm_connector_cleanup(connector); @@ -3877,25 +4333,36 @@ intel_dp_init(struct drm_device *dev, int output_reg, enum port port) DRM_MODE_ENCODER_TMDS); intel_encoder->compute_config = intel_dp_compute_config; - intel_encoder->mode_set = intel_dp_mode_set; intel_encoder->disable = intel_disable_dp; - intel_encoder->post_disable = intel_post_disable_dp; intel_encoder->get_hw_state = intel_dp_get_hw_state; intel_encoder->get_config = intel_dp_get_config; - if (IS_VALLEYVIEW(dev)) { + if (IS_CHERRYVIEW(dev)) { + intel_encoder->pre_enable = chv_pre_enable_dp; + intel_encoder->enable = vlv_enable_dp; + intel_encoder->post_disable = chv_post_disable_dp; + } else if (IS_VALLEYVIEW(dev)) { intel_encoder->pre_pll_enable = vlv_dp_pre_pll_enable; intel_encoder->pre_enable = vlv_pre_enable_dp; intel_encoder->enable = vlv_enable_dp; + intel_encoder->post_disable = vlv_post_disable_dp; } else { intel_encoder->pre_enable = g4x_pre_enable_dp; intel_encoder->enable = g4x_enable_dp; + intel_encoder->post_disable = g4x_post_disable_dp; } intel_dig_port->port = port; intel_dig_port->dp.output_reg = output_reg; intel_encoder->type = INTEL_OUTPUT_DISPLAYPORT; - intel_encoder->crtc_mask = (1 << 0) | (1 << 1) | (1 << 2); + if (IS_CHERRYVIEW(dev)) { + if (port == PORT_D) + intel_encoder->crtc_mask = 1 << 2; + else + intel_encoder->crtc_mask = (1 << 0) | (1 << 1); + } else { + intel_encoder->crtc_mask = (1 << 0) | (1 << 1) | (1 << 2); + } intel_encoder->cloneable = 0; intel_encoder->hot_plug = intel_dp_hot_plug; |