diff options
Diffstat (limited to 'drivers/i2c/busses/i2c-mt65xx.c')
| -rw-r--r-- | drivers/i2c/busses/i2c-mt65xx.c | 27 |
1 files changed, 22 insertions, 5 deletions
diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c index 33de99b7bc20..0818d3e50734 100644 --- a/drivers/i2c/busses/i2c-mt65xx.c +++ b/drivers/i2c/busses/i2c-mt65xx.c @@ -38,6 +38,7 @@ #define I2C_IO_CONFIG_OPEN_DRAIN 0x0003 #define I2C_IO_CONFIG_PUSH_PULL 0x0000 #define I2C_SOFT_RST 0x0001 +#define I2C_HANDSHAKE_RST 0x0020 #define I2C_FIFO_ADDR_CLR 0x0001 #define I2C_DELAY_LEN 0x0002 #define I2C_TIME_CLR_VALUE 0x0000 @@ -45,6 +46,7 @@ #define I2C_WRRD_TRANAC_VALUE 0x0002 #define I2C_RD_TRANAC_VALUE 0x0001 #define I2C_SCL_MIS_COMP_VALUE 0x0000 +#define I2C_CHN_CLR_FLAG 0x0000 #define I2C_DMA_CON_TX 0x0000 #define I2C_DMA_CON_RX 0x0001 @@ -54,7 +56,9 @@ #define I2C_DMA_START_EN 0x0001 #define I2C_DMA_INT_FLAG_NONE 0x0000 #define I2C_DMA_CLR_FLAG 0x0000 +#define I2C_DMA_WARM_RST 0x0001 #define I2C_DMA_HARD_RST 0x0002 +#define I2C_DMA_HANDSHAKE_RST 0x0004 #define MAX_SAMPLE_CNT_DIV 8 #define MAX_STEP_CNT_DIV 64 @@ -475,11 +479,24 @@ static void mtk_i2c_init_hw(struct mtk_i2c *i2c) { u16 control_reg; - writel(I2C_DMA_HARD_RST, i2c->pdmabase + OFFSET_RST); - udelay(50); - writel(I2C_DMA_CLR_FLAG, i2c->pdmabase + OFFSET_RST); - - mtk_i2c_writew(i2c, I2C_SOFT_RST, OFFSET_SOFTRESET); + if (i2c->dev_comp->dma_sync) { + writel(I2C_DMA_WARM_RST, i2c->pdmabase + OFFSET_RST); + udelay(10); + writel(I2C_DMA_CLR_FLAG, i2c->pdmabase + OFFSET_RST); + udelay(10); + writel(I2C_DMA_HANDSHAKE_RST | I2C_DMA_HARD_RST, + i2c->pdmabase + OFFSET_RST); + mtk_i2c_writew(i2c, I2C_HANDSHAKE_RST | I2C_SOFT_RST, + OFFSET_SOFTRESET); + udelay(10); + writel(I2C_DMA_CLR_FLAG, i2c->pdmabase + OFFSET_RST); + mtk_i2c_writew(i2c, I2C_CHN_CLR_FLAG, OFFSET_SOFTRESET); + } else { + writel(I2C_DMA_HARD_RST, i2c->pdmabase + OFFSET_RST); + udelay(50); + writel(I2C_DMA_CLR_FLAG, i2c->pdmabase + OFFSET_RST); + mtk_i2c_writew(i2c, I2C_SOFT_RST, OFFSET_SOFTRESET); + } /* Set ioconfig */ if (i2c->use_push_pull) |