diff options
Diffstat (limited to 'drivers/irqchip/irq-mbigen.c')
| -rw-r--r-- | drivers/irqchip/irq-mbigen.c | 297 |
1 files changed, 297 insertions, 0 deletions
diff --git a/drivers/irqchip/irq-mbigen.c b/drivers/irqchip/irq-mbigen.c new file mode 100644 index 000000000000..4dd3eb8a40b3 --- /dev/null +++ b/drivers/irqchip/irq-mbigen.c @@ -0,0 +1,297 @@ +/* + * Copyright (C) 2015 Hisilicon Limited, All Rights Reserved. + * Author: Jun Ma <majun258@huawei.com> + * Author: Yun Wu <wuyun.wu@huawei.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/interrupt.h> +#include <linux/irqchip.h> +#include <linux/module.h> +#include <linux/msi.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +/* Interrupt numbers per mbigen node supported */ +#define IRQS_PER_MBIGEN_NODE 128 + +/* 64 irqs (Pin0-pin63) are reserved for each mbigen chip */ +#define RESERVED_IRQ_PER_MBIGEN_CHIP 64 + +/* The maximum IRQ pin number of mbigen chip(start from 0) */ +#define MAXIMUM_IRQ_PIN_NUM 1407 + +/** + * In mbigen vector register + * bit[21:12]: event id value + * bit[11:0]: device id + */ +#define IRQ_EVENT_ID_SHIFT 12 +#define IRQ_EVENT_ID_MASK 0x3ff + +/* register range of each mbigen node */ +#define MBIGEN_NODE_OFFSET 0x1000 + +/* offset of vector register in mbigen node */ +#define REG_MBIGEN_VEC_OFFSET 0x200 + +/** + * offset of clear register in mbigen node + * This register is used to clear the status + * of interrupt + */ +#define REG_MBIGEN_CLEAR_OFFSET 0xa000 + +/** + * offset of interrupt type register + * This register is used to configure interrupt + * trigger type + */ +#define REG_MBIGEN_TYPE_OFFSET 0x0 + +/** + * struct mbigen_device - holds the information of mbigen device. + * + * @pdev: pointer to the platform device structure of mbigen chip. + * @base: mapped address of this mbigen chip. + */ +struct mbigen_device { + struct platform_device *pdev; + void __iomem *base; +}; + +static inline unsigned int get_mbigen_vec_reg(irq_hw_number_t hwirq) +{ + unsigned int nid, pin; + + hwirq -= RESERVED_IRQ_PER_MBIGEN_CHIP; + nid = hwirq / IRQS_PER_MBIGEN_NODE + 1; + pin = hwirq % IRQS_PER_MBIGEN_NODE; + + return pin * 4 + nid * MBIGEN_NODE_OFFSET + + REG_MBIGEN_VEC_OFFSET; +} + +static inline void get_mbigen_type_reg(irq_hw_number_t hwirq, + u32 *mask, u32 *addr) +{ + unsigned int nid, irq_ofst, ofst; + + hwirq -= RESERVED_IRQ_PER_MBIGEN_CHIP; + nid = hwirq / IRQS_PER_MBIGEN_NODE + 1; + irq_ofst = hwirq % IRQS_PER_MBIGEN_NODE; + + *mask = 1 << (irq_ofst % 32); + ofst = irq_ofst / 32 * 4; + + *addr = ofst + nid * MBIGEN_NODE_OFFSET + + REG_MBIGEN_TYPE_OFFSET; +} + +static inline void get_mbigen_clear_reg(irq_hw_number_t hwirq, + u32 *mask, u32 *addr) +{ + unsigned int ofst; + + hwirq -= RESERVED_IRQ_PER_MBIGEN_CHIP; + ofst = hwirq / 32 * 4; + + *mask = 1 << (hwirq % 32); + *addr = ofst + REG_MBIGEN_CLEAR_OFFSET; +} + +static void mbigen_eoi_irq(struct irq_data *data) +{ + void __iomem *base = data->chip_data; + u32 mask, addr; + + get_mbigen_clear_reg(data->hwirq, &mask, &addr); + + writel_relaxed(mask, base + addr); + + irq_chip_eoi_parent(data); +} + +static int mbigen_set_type(struct irq_data *data, unsigned int type) +{ + void __iomem *base = data->chip_data; + u32 mask, addr, val; + + if (type != IRQ_TYPE_LEVEL_HIGH && type != IRQ_TYPE_EDGE_RISING) + return -EINVAL; + + get_mbigen_type_reg(data->hwirq, &mask, &addr); + + val = readl_relaxed(base + addr); + + if (type == IRQ_TYPE_LEVEL_HIGH) + val |= mask; + else + val &= ~mask; + + writel_relaxed(val, base + addr); + + return 0; +} + +static struct irq_chip mbigen_irq_chip = { + .name = "mbigen-v2", + .irq_mask = irq_chip_mask_parent, + .irq_unmask = irq_chip_unmask_parent, + .irq_eoi = mbigen_eoi_irq, + .irq_set_type = mbigen_set_type, + .irq_set_affinity = irq_chip_set_affinity_parent, +}; + +static void mbigen_write_msg(struct msi_desc *desc, struct msi_msg *msg) +{ + struct irq_data *d = irq_get_irq_data(desc->irq); + void __iomem *base = d->chip_data; + u32 val; + + base += get_mbigen_vec_reg(d->hwirq); + val = readl_relaxed(base); + + val &= ~(IRQ_EVENT_ID_MASK << IRQ_EVENT_ID_SHIFT); + val |= (msg->data << IRQ_EVENT_ID_SHIFT); + + /* The address of doorbell is encoded in mbigen register by default + * So,we don't need to program the doorbell address at here + */ + writel_relaxed(val, base); +} + +static int mbigen_domain_translate(struct irq_domain *d, + struct irq_fwspec *fwspec, + unsigned long *hwirq, + unsigned int *type) +{ + if (is_of_node(fwspec->fwnode)) { + if (fwspec->param_count != 2) + return -EINVAL; + + if ((fwspec->param[0] > MAXIMUM_IRQ_PIN_NUM) || + (fwspec->param[0] < RESERVED_IRQ_PER_MBIGEN_CHIP)) + return -EINVAL; + else + *hwirq = fwspec->param[0]; + + /* If there is no valid irq type, just use the default type */ + if ((fwspec->param[1] == IRQ_TYPE_EDGE_RISING) || + (fwspec->param[1] == IRQ_TYPE_LEVEL_HIGH)) + *type = fwspec->param[1]; + else + return -EINVAL; + + return 0; + } + return -EINVAL; +} + +static int mbigen_irq_domain_alloc(struct irq_domain *domain, + unsigned int virq, + unsigned int nr_irqs, + void *args) +{ + struct irq_fwspec *fwspec = args; + irq_hw_number_t hwirq; + unsigned int type; + struct mbigen_device *mgn_chip; + int i, err; + + err = mbigen_domain_translate(domain, fwspec, &hwirq, &type); + if (err) + return err; + + err = platform_msi_domain_alloc(domain, virq, nr_irqs); + if (err) + return err; + + mgn_chip = platform_msi_get_host_data(domain); + + for (i = 0; i < nr_irqs; i++) + irq_domain_set_hwirq_and_chip(domain, virq + i, hwirq + i, + &mbigen_irq_chip, mgn_chip->base); + + return 0; +} + +static struct irq_domain_ops mbigen_domain_ops = { + .translate = mbigen_domain_translate, + .alloc = mbigen_irq_domain_alloc, + .free = irq_domain_free_irqs_common, +}; + +static int mbigen_device_probe(struct platform_device *pdev) +{ + struct mbigen_device *mgn_chip; + struct resource *res; + struct irq_domain *domain; + u32 num_pins; + + mgn_chip = devm_kzalloc(&pdev->dev, sizeof(*mgn_chip), GFP_KERNEL); + if (!mgn_chip) + return -ENOMEM; + + mgn_chip->pdev = pdev; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + mgn_chip->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(mgn_chip->base)) + return PTR_ERR(mgn_chip->base); + + if (of_property_read_u32(pdev->dev.of_node, "num-pins", &num_pins) < 0) { + dev_err(&pdev->dev, "No num-pins property\n"); + return -EINVAL; + } + + domain = platform_msi_create_device_domain(&pdev->dev, num_pins, + mbigen_write_msg, + &mbigen_domain_ops, + mgn_chip); + + if (!domain) + return -ENOMEM; + + platform_set_drvdata(pdev, mgn_chip); + + dev_info(&pdev->dev, "Allocated %d MSIs\n", num_pins); + + return 0; +} + +static const struct of_device_id mbigen_of_match[] = { + { .compatible = "hisilicon,mbigen-v2" }, + { /* END */ } +}; +MODULE_DEVICE_TABLE(of, mbigen_of_match); + +static struct platform_driver mbigen_platform_driver = { + .driver = { + .name = "Hisilicon MBIGEN-V2", + .owner = THIS_MODULE, + .of_match_table = mbigen_of_match, + }, + .probe = mbigen_device_probe, +}; + +module_platform_driver(mbigen_platform_driver); + +MODULE_AUTHOR("Jun Ma <majun258@huawei.com>"); +MODULE_AUTHOR("Yun Wu <wuyun.wu@huawei.com>"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Hisilicon MBI Generator driver"); |