diff options
Diffstat (limited to 'drivers/media/usb/em28xx/em28xx-cards.c')
| -rw-r--r-- | drivers/media/usb/em28xx/em28xx-cards.c | 553 |
1 files changed, 222 insertions, 331 deletions
diff --git a/drivers/media/usb/em28xx/em28xx-cards.c b/drivers/media/usb/em28xx/em28xx-cards.c index a5196697627f..4d97a76cc3b0 100644 --- a/drivers/media/usb/em28xx/em28xx-cards.c +++ b/drivers/media/usb/em28xx/em28xx-cards.c @@ -36,7 +36,6 @@ #include <media/tvaudio.h> #include <media/i2c-addr.h> #include <media/tveeprom.h> -#include <media/v4l2-clk.h> #include <media/v4l2-common.h> #include "em28xx.h" @@ -67,7 +66,7 @@ MODULE_PARM_DESC(usb_xfer_mode, /* Bitmask marking allocated devices from 0 to EM28XX_MAXBOARDS - 1 */ -static unsigned long em28xx_devused; +DECLARE_BITMAP(em28xx_devused, EM28XX_MAXBOARDS); struct em28xx_hash_table { unsigned long hash; @@ -356,6 +355,28 @@ static struct em28xx_reg_seq c3tech_digital_duo_digital[] = { { -1, -1, -1, -1}, }; +/* + * 2013:0258 PCTV DVB-S2 Stick (461e) + * GPIO 0 = POWER_ON + * GPIO 1 = BOOST + * GPIO 2 = VUV_LNB (red LED) + * GPIO 3 = #EXT_12V + * GPIO 4 = INT_DEM + * GPIO 5 = INT_LNB + * GPIO 6 = #RESET_DEM + * GPIO 7 = P07_LED (green LED) + */ +static struct em28xx_reg_seq pctv_461e[] = { + {EM2874_R80_GPIO_P0_CTRL, 0x7f, 0xff, 0}, + {0x0d, 0xff, 0xff, 0}, + {EM2874_R80_GPIO_P0_CTRL, 0x3f, 0xff, 100}, /* reset demod */ + {EM2874_R80_GPIO_P0_CTRL, 0x7f, 0xff, 200}, /* reset demod */ + {0x0d, 0x42, 0xff, 0}, + {EM2874_R80_GPIO_P0_CTRL, 0xeb, 0xff, 0}, + {EM2874_R5F_TS_ENABLE, 0x84, 0x84, 0}, /* parallel? | null discard */ + { -1, -1, -1, -1}, +}; + #if 0 static struct em28xx_reg_seq hauppauge_930c_gpio[] = { {EM2874_R80_GPIO_P0_CTRL, 0x6f, 0xff, 10}, @@ -412,6 +433,70 @@ static struct em28xx_reg_seq pctv_520e[] = { { -1, -1, -1, -1}, }; +/* 1ae7:9003/9004 SpeedLink Vicious And Devine Laplace webcam + * reg 0x80/0x84: + * GPIO_0: capturing LED, 0=on, 1=off + * GPIO_2: AV mute button, 0=pressed, 1=unpressed + * GPIO 3: illumination button, 0=pressed, 1=unpressed + * GPIO_6: illumination/flash LED, 0=on, 1=off + * reg 0x81/0x85: + * GPIO_7: snapshot button, 0=pressed, 1=unpressed + */ +static struct em28xx_reg_seq speedlink_vad_laplace_reg_seq[] = { + {EM2820_R08_GPIO_CTRL, 0xf7, 0xff, 10}, + {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xb2, 10}, + { -1, -1, -1, -1}, +}; + +/* + * Button definitions + */ +static struct em28xx_button std_snapshot_button[] = { + { + .role = EM28XX_BUTTON_SNAPSHOT, + .reg_r = EM28XX_R0C_USBSUSP, + .reg_clearing = EM28XX_R0C_USBSUSP, + .mask = EM28XX_R0C_USBSUSP_SNAPSHOT, + .inverted = 0, + }, + {-1, 0, 0, 0, 0}, +}; + +static struct em28xx_button speedlink_vad_laplace_buttons[] = { + { + .role = EM28XX_BUTTON_SNAPSHOT, + .reg_r = EM2874_R85_GPIO_P1_STATE, + .mask = 0x80, + .inverted = 1, + }, + { + .role = EM28XX_BUTTON_ILLUMINATION, + .reg_r = EM2874_R84_GPIO_P0_STATE, + .mask = 0x08, + .inverted = 1, + }, + {-1, 0, 0, 0, 0}, +}; + +/* + * LED definitions + */ +static struct em28xx_led speedlink_vad_laplace_leds[] = { + { + .role = EM28XX_LED_ANALOG_CAPTURING, + .gpio_reg = EM2874_R80_GPIO_P0_CTRL, + .gpio_mask = 0x01, + .inverted = 1, + }, + { + .role = EM28XX_LED_ILLUMINATION, + .gpio_reg = EM2874_R80_GPIO_P0_CTRL, + .gpio_mask = 0x40, + .inverted = 1, + }, + {-1, 0, 0, 0}, +}; + /* * Board definitions */ @@ -1391,7 +1476,7 @@ struct em28xx_board em28xx_boards[] = { }, [EM2820_BOARD_PROLINK_PLAYTV_USB2] = { .name = "SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0", - .has_snapshot_button = 1, + .buttons = std_snapshot_button, .tda9887_conf = TDA9887_PRESENT, .tuner_type = TUNER_YMEC_TVF_5533MF, .decoder = EM28XX_SAA711X, @@ -1413,7 +1498,7 @@ struct em28xx_board em28xx_boards[] = { }, [EM2860_BOARD_SAA711X_REFERENCE_DESIGN] = { .name = "EM2860/SAA711X Reference Design", - .has_snapshot_button = 1, + .buttons = std_snapshot_button, .tuner_type = TUNER_ABSENT, .decoder = EM28XX_SAA711X, .input = { { @@ -2020,7 +2105,7 @@ struct em28xx_board em28xx_boards[] = { }, /* 1b80:e1cc Delock 61959 * Empia EM2874B + Micronas DRX 3913KA2 + NXP TDA18271HDC2 - * mostly the same as MaxMedia UB-425-TC but different remote */ + * mostly the same as MaxMedia UB-425-TC but different remote */ [EM2874_BOARD_DELOCK_61959] = { .name = "Delock 61959", .tuner_type = TUNER_ABSENT, @@ -2043,7 +2128,38 @@ struct em28xx_board em28xx_boards[] = { .tuner_gpio = default_tuner_gpio, .def_i2c_bus = 1, }, + /* 1ae7:9003/9004 SpeedLink Vicious And Devine Laplace webcam + * Empia EM2765 + OmniVision OV2640 */ + [EM2765_BOARD_SPEEDLINK_VAD_LAPLACE] = { + .name = "SpeedLink Vicious And Devine Laplace webcam", + .xclk = EM28XX_XCLK_FREQUENCY_24MHZ, + .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | + EM28XX_I2C_FREQ_100_KHZ, + .def_i2c_bus = 1, + .tuner_type = TUNER_ABSENT, + .is_webcam = 1, + .input = { { + .type = EM28XX_VMUX_COMPOSITE1, + .amux = EM28XX_AMUX_VIDEO, + .gpio = speedlink_vad_laplace_reg_seq, + } }, + .buttons = speedlink_vad_laplace_buttons, + .leds = speedlink_vad_laplace_leds, + }, + /* 2013:0258 PCTV DVB-S2 Stick (461e) + * Empia EM28178, Montage M88DS3103, Montage M88TS2022, Allegro A8293 */ + [EM28178_BOARD_PCTV_461E] = { + .def_i2c_bus = 1, + .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ, + .name = "PCTV DVB-S2 Stick (461e)", + .tuner_type = TUNER_ABSENT, + .tuner_gpio = pctv_461e, + .has_dvb = 1, + .ir_codes = RC_MAP_PINNACLE_PCTV_HD, + }, }; +EXPORT_SYMBOL_GPL(em28xx_boards); + const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards); /* table of devices that work with this driver */ @@ -2208,6 +2324,12 @@ struct usb_device_id em28xx_id_table[] = { .driver_info = EM2884_BOARD_PCTV_520E }, { USB_DEVICE(0x1b80, 0xe1cc), .driver_info = EM2874_BOARD_DELOCK_61959 }, + { USB_DEVICE(0x1ae7, 0x9003), + .driver_info = EM2765_BOARD_SPEEDLINK_VAD_LAPLACE }, + { USB_DEVICE(0x1ae7, 0x9004), + .driver_info = EM2765_BOARD_SPEEDLINK_VAD_LAPLACE }, + { USB_DEVICE(0x2013, 0x0258), + .driver_info = EM28178_BOARD_PCTV_461E }, { }, }; MODULE_DEVICE_TABLE(usb, em28xx_id_table); @@ -2239,24 +2361,6 @@ static struct em28xx_hash_table em28xx_i2c_hash[] = { }; /* NOTE: introduce a separate hash table for devices with 16 bit eeproms */ -/* I2C possible address to saa7115, tvp5150, msp3400, tvaudio */ -static unsigned short saa711x_addrs[] = { - 0x4a >> 1, 0x48 >> 1, /* SAA7111, SAA7111A and SAA7113 */ - 0x42 >> 1, 0x40 >> 1, /* SAA7114, SAA7115 and SAA7118 */ - I2C_CLIENT_END }; - -static unsigned short tvp5150_addrs[] = { - 0xb8 >> 1, - 0xba >> 1, - I2C_CLIENT_END -}; - -static unsigned short msp3400_addrs[] = { - 0x80 >> 1, - 0x88 >> 1, - I2C_CLIENT_END -}; - int em28xx_tuner_callback(void *ptr, int component, int command, int arg) { struct em28xx_i2c_bus *i2c_bus = ptr; @@ -2408,113 +2512,6 @@ static void em28xx_pre_card_setup(struct em28xx *dev) em28xx_set_mode(dev, EM28XX_SUSPEND); } -static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl) -{ - memset(ctl, 0, sizeof(*ctl)); - - ctl->fname = XC2028_DEFAULT_FIRMWARE; - ctl->max_len = 64; - ctl->mts = em28xx_boards[dev->model].mts_firmware; - - switch (dev->model) { - case EM2880_BOARD_EMPIRE_DUAL_TV: - case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900: - case EM2882_BOARD_TERRATEC_HYBRID_XS: - ctl->demod = XC3028_FE_ZARLINK456; - break; - case EM2880_BOARD_TERRATEC_HYBRID_XS: - case EM2880_BOARD_TERRATEC_HYBRID_XS_FR: - case EM2881_BOARD_PINNACLE_HYBRID_PRO: - ctl->demod = XC3028_FE_ZARLINK456; - break; - case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2: - case EM2882_BOARD_PINNACLE_HYBRID_PRO_330E: - ctl->demod = XC3028_FE_DEFAULT; - break; - case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600: - ctl->demod = XC3028_FE_DEFAULT; - ctl->fname = XC3028L_DEFAULT_FIRMWARE; - break; - case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850: - case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950: - case EM2880_BOARD_PINNACLE_PCTV_HD_PRO: - /* FIXME: Better to specify the needed IF */ - ctl->demod = XC3028_FE_DEFAULT; - break; - case EM2883_BOARD_KWORLD_HYBRID_330U: - case EM2882_BOARD_DIKOM_DK300: - case EM2882_BOARD_KWORLD_VS_DVBT: - ctl->demod = XC3028_FE_CHINA; - ctl->fname = XC2028_DEFAULT_FIRMWARE; - break; - case EM2882_BOARD_EVGA_INDTUBE: - ctl->demod = XC3028_FE_CHINA; - ctl->fname = XC3028L_DEFAULT_FIRMWARE; - break; - default: - ctl->demod = XC3028_FE_OREN538; - } -} - -static void em28xx_tuner_setup(struct em28xx *dev) -{ - struct tuner_setup tun_setup; - struct v4l2_frequency f; - - if (dev->tuner_type == TUNER_ABSENT) - return; - - memset(&tun_setup, 0, sizeof(tun_setup)); - - tun_setup.mode_mask = T_ANALOG_TV | T_RADIO; - tun_setup.tuner_callback = em28xx_tuner_callback; - - if (dev->board.radio.type) { - tun_setup.type = dev->board.radio.type; - tun_setup.addr = dev->board.radio_addr; - - v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup); - } - - if ((dev->tuner_type != TUNER_ABSENT) && (dev->tuner_type)) { - tun_setup.type = dev->tuner_type; - tun_setup.addr = dev->tuner_addr; - - v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup); - } - - if (dev->tda9887_conf) { - struct v4l2_priv_tun_config tda9887_cfg; - - tda9887_cfg.tuner = TUNER_TDA9887; - tda9887_cfg.priv = &dev->tda9887_conf; - - v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config, &tda9887_cfg); - } - - if (dev->tuner_type == TUNER_XC2028) { - struct v4l2_priv_tun_config xc2028_cfg; - struct xc2028_ctrl ctl; - - memset(&xc2028_cfg, 0, sizeof(xc2028_cfg)); - memset(&ctl, 0, sizeof(ctl)); - - em28xx_setup_xc3028(dev, &ctl); - - xc2028_cfg.tuner = TUNER_XC2028; - xc2028_cfg.priv = &ctl; - - v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config, &xc2028_cfg); - } - - /* configure tuner */ - f.tuner = 0; - f.type = V4L2_TUNER_ANALOG_TV; - f.frequency = 9076; /* just a magic number */ - dev->ctl_freq = f.frequency; - v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, &f); -} - static int em28xx_hint_board(struct em28xx *dev) { int i; @@ -2768,57 +2765,56 @@ static void em28xx_card_setup(struct em28xx *dev) /* Allow override tuner type by a module parameter */ if (tuner >= 0) dev->tuner_type = tuner; +} - /* request some modules */ - if (dev->board.has_msp34xx) - v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap[dev->def_i2c_bus], - "msp3400", 0, msp3400_addrs); - - if (dev->board.decoder == EM28XX_SAA711X) - v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap[dev->def_i2c_bus], - "saa7115_auto", 0, saa711x_addrs); - - if (dev->board.decoder == EM28XX_TVP5150) - v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap[dev->def_i2c_bus], - "tvp5150", 0, tvp5150_addrs); - - if (dev->board.adecoder == EM28XX_TVAUDIO) - v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap[dev->def_i2c_bus], - "tvaudio", dev->board.tvaudio_addr, NULL); - - if (dev->board.tuner_type != TUNER_ABSENT) { - int has_demod = (dev->tda9887_conf & TDA9887_PRESENT); - - if (dev->board.radio.type) - v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap[dev->def_i2c_bus], - "tuner", dev->board.radio_addr, NULL); - - if (has_demod) - v4l2_i2c_new_subdev(&dev->v4l2_dev, - &dev->i2c_adap[dev->def_i2c_bus], "tuner", - 0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD)); - if (dev->tuner_addr == 0) { - enum v4l2_i2c_tuner_type type = - has_demod ? ADDRS_TV_WITH_DEMOD : ADDRS_TV; - struct v4l2_subdev *sd; - - sd = v4l2_i2c_new_subdev(&dev->v4l2_dev, - &dev->i2c_adap[dev->def_i2c_bus], "tuner", - 0, v4l2_i2c_tuner_addrs(type)); - - if (sd) - dev->tuner_addr = v4l2_i2c_subdev_addr(sd); - } else { - v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap[dev->def_i2c_bus], - "tuner", dev->tuner_addr, NULL); - } - } +void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl) +{ + memset(ctl, 0, sizeof(*ctl)); - em28xx_tuner_setup(dev); + ctl->fname = XC2028_DEFAULT_FIRMWARE; + ctl->max_len = 64; + ctl->mts = em28xx_boards[dev->model].mts_firmware; - em28xx_init_camera(dev); + switch (dev->model) { + case EM2880_BOARD_EMPIRE_DUAL_TV: + case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900: + case EM2882_BOARD_TERRATEC_HYBRID_XS: + ctl->demod = XC3028_FE_ZARLINK456; + break; + case EM2880_BOARD_TERRATEC_HYBRID_XS: + case EM2880_BOARD_TERRATEC_HYBRID_XS_FR: + case EM2881_BOARD_PINNACLE_HYBRID_PRO: + ctl->demod = XC3028_FE_ZARLINK456; + break; + case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2: + case EM2882_BOARD_PINNACLE_HYBRID_PRO_330E: + ctl->demod = XC3028_FE_DEFAULT; + break; + case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600: + ctl->demod = XC3028_FE_DEFAULT; + ctl->fname = XC3028L_DEFAULT_FIRMWARE; + break; + case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850: + case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950: + case EM2880_BOARD_PINNACLE_PCTV_HD_PRO: + /* FIXME: Better to specify the needed IF */ + ctl->demod = XC3028_FE_DEFAULT; + break; + case EM2883_BOARD_KWORLD_HYBRID_330U: + case EM2882_BOARD_DIKOM_DK300: + case EM2882_BOARD_KWORLD_VS_DVBT: + ctl->demod = XC3028_FE_CHINA; + ctl->fname = XC2028_DEFAULT_FIRMWARE; + break; + case EM2882_BOARD_EVGA_INDTUBE: + ctl->demod = XC3028_FE_CHINA; + ctl->fname = XC3028L_DEFAULT_FIRMWARE; + break; + default: + ctl->demod = XC3028_FE_OREN538; + } } - +EXPORT_SYMBOL_GPL(em28xx_setup_xc3028); static void request_module_async(struct work_struct *work) { @@ -2831,17 +2827,30 @@ static void request_module_async(struct work_struct *work) * can be initialised right now. Otherwise, the module init * code will do it. */ + + /* + * Devicdes with an audio-only interface also have a V4L/DVB/RC + * interface. Don't register extensions twice on those devices. + */ + if (dev->is_audio_only) { +#if defined(CONFIG_MODULES) && defined(MODULE) + request_module("em28xx-alsa"); +#endif + return; + } + em28xx_init_extension(dev); #if defined(CONFIG_MODULES) && defined(MODULE) + if (dev->has_video) + request_module("em28xx-v4l"); if (dev->has_audio_class) request_module("snd-usb-audio"); else if (dev->has_alsa_audio) request_module("em28xx-alsa"); - if (dev->board.has_dvb) request_module("em28xx-dvb"); - if (dev->board.has_snapshot_button || + if (dev->board.buttons || ((dev->board.ir_codes || dev->board.has_ir_i2c) && !disable_ir)) request_module("em28xx-rc"); #endif /* CONFIG_MODULES */ @@ -2867,23 +2876,20 @@ void em28xx_release_resources(struct em28xx *dev) { /*FIXME: I2C IR should be disconnected */ - em28xx_release_analog_resources(dev); + mutex_lock(&dev->lock); if (dev->def_i2c_bus) em28xx_i2c_unregister(dev, 1); em28xx_i2c_unregister(dev, 0); - if (dev->clk) - v4l2_clk_unregister_fixed(dev->clk); - - v4l2_ctrl_handler_free(&dev->ctrl_handler); - - v4l2_device_unregister(&dev->v4l2_dev); usb_put_dev(dev->udev); /* Mark device as unused */ - clear_bit(dev->devno, &em28xx_devused); + clear_bit(dev->devno, em28xx_devused); + + mutex_unlock(&dev->lock); }; +EXPORT_SYMBOL_GPL(em28xx_release_resources); /* * em28xx_init_dev() @@ -2893,7 +2899,6 @@ static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev, struct usb_interface *interface, int minor) { - struct v4l2_ctrl_handler *hdl = &dev->ctrl_handler; int retval; static const char *default_chip_name = "em28xx"; const char *chip_name = default_chip_name; @@ -2968,6 +2973,11 @@ static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev, dev->wait_after_write = 0; dev->eeprom_addrwidth_16bit = 1; break; + case CHIP_ID_EM28178: + chip_name = "em28178"; + dev->wait_after_write = 0; + dev->eeprom_addrwidth_16bit = 1; + break; case CHIP_ID_EM2883: chip_name = "em2882/3"; dev->wait_after_write = 0; @@ -2983,6 +2993,16 @@ static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev, } } + if (dev->chip_id == CHIP_ID_EM2870 || + dev->chip_id == CHIP_ID_EM2874 || + dev->chip_id == CHIP_ID_EM28174 || + dev->chip_id == CHIP_ID_EM28178) { + /* Digital only device - don't load any alsa module */ + dev->audio_mode.has_audio = false; + dev->has_audio_class = false; + dev->has_alsa_audio = false; + } + if (chip_name != default_chip_name) printk(KERN_INFO DRIVER_NAME ": chip ID is %s\n", chip_name); @@ -3015,15 +3035,6 @@ static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev, } } - retval = v4l2_device_register(&interface->dev, &dev->v4l2_dev); - if (retval < 0) { - em28xx_errdev("Call to v4l2_device_register() failed!\n"); - return retval; - } - - v4l2_ctrl_handler_init(hdl, 8); - dev->v4l2_dev.ctrl_handler = hdl; - rt_mutex_init(&dev->i2c_bus_lock); /* register i2c bus 0 */ @@ -3034,7 +3045,7 @@ static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev, if (retval < 0) { em28xx_errdev("%s: em28xx_i2c_register bus 0 - error [%d]!\n", __func__, retval); - goto unregister_dev; + return retval; } /* register i2c bus 1 */ @@ -3048,88 +3059,17 @@ static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev, if (retval < 0) { em28xx_errdev("%s: em28xx_i2c_register bus 1 - error [%d]!\n", __func__, retval); - goto unregister_dev; - } - } - - /* - * Default format, used for tvp5150 or saa711x output formats - */ - dev->vinmode = 0x10; - dev->vinctl = EM28XX_VINCTRL_INTERLACED | - EM28XX_VINCTRL_CCIR656_ENABLE; - /* Do board specific init and eeprom reading */ - em28xx_card_setup(dev); + em28xx_i2c_unregister(dev, 0); - /* Configure audio */ - retval = em28xx_audio_setup(dev); - if (retval < 0) { - em28xx_errdev("%s: Error while setting audio - error [%d]!\n", - __func__, retval); - goto fail; - } - if (dev->audio_mode.ac97 != EM28XX_NO_AC97) { - v4l2_ctrl_new_std(hdl, &em28xx_ctrl_ops, - V4L2_CID_AUDIO_MUTE, 0, 1, 1, 1); - v4l2_ctrl_new_std(hdl, &em28xx_ctrl_ops, - V4L2_CID_AUDIO_VOLUME, 0, 0x1f, 1, 0x1f); - } else { - /* install the em28xx notify callback */ - v4l2_ctrl_notify(v4l2_ctrl_find(hdl, V4L2_CID_AUDIO_MUTE), - em28xx_ctrl_notify, dev); - v4l2_ctrl_notify(v4l2_ctrl_find(hdl, V4L2_CID_AUDIO_VOLUME), - em28xx_ctrl_notify, dev); - } - - /* wake i2c devices */ - em28xx_wake_i2c(dev); - - /* init video dma queues */ - INIT_LIST_HEAD(&dev->vidq.active); - INIT_LIST_HEAD(&dev->vbiq.active); - - if (dev->board.has_msp34xx) { - /* Send a reset to other chips via gpio */ - retval = em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xf7); - if (retval < 0) { - em28xx_errdev("%s: em28xx_write_reg - " - "msp34xx(1) failed! error [%d]\n", - __func__, retval); - goto fail; - } - msleep(3); - - retval = em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff); - if (retval < 0) { - em28xx_errdev("%s: em28xx_write_reg - " - "msp34xx(2) failed! error [%d]\n", - __func__, retval); - goto fail; + return retval; } - msleep(3); - } - - retval = em28xx_register_analog_devices(dev); - if (retval < 0) { - goto fail; } - /* Save some power by putting tuner to sleep */ - v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_power, 0); + /* Do board specific init and eeprom reading */ + em28xx_card_setup(dev); return 0; - -fail: - if (dev->def_i2c_bus) - em28xx_i2c_unregister(dev, 1); - em28xx_i2c_unregister(dev, 0); - v4l2_ctrl_handler_free(&dev->ctrl_handler); - -unregister_dev: - v4l2_device_unregister(&dev->v4l2_dev); - - return retval; } /* high bandwidth multiplier, as encoded in highspeed endpoint descriptors */ @@ -3154,7 +3094,7 @@ static int em28xx_usb_probe(struct usb_interface *interface, /* Check to see next free device and mark as used */ do { - nr = find_first_zero_bit(&em28xx_devused, EM28XX_MAXBOARDS); + nr = find_first_zero_bit(em28xx_devused, EM28XX_MAXBOARDS); if (nr >= EM28XX_MAXBOARDS) { /* No free device slots */ printk(DRIVER_NAME ": Supports only %i em28xx boards.\n", @@ -3162,7 +3102,7 @@ static int em28xx_usb_probe(struct usb_interface *interface, retval = -ENOMEM; goto err_no_slot; } - } while (test_and_set_bit(nr, &em28xx_devused)); + } while (test_and_set_bit(nr, em28xx_devused)); /* Don't register audio interfaces */ if (interface->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) { @@ -3332,7 +3272,9 @@ static int em28xx_usb_probe(struct usb_interface *interface, dev->alt = -1; dev->is_audio_only = has_audio && !(has_video || has_dvb); dev->has_alsa_audio = has_audio; - dev->audio_ifnum = ifnum; + dev->audio_mode.has_audio = has_audio; + dev->has_video = has_video; + dev->ifnum = ifnum; /* Checks if audio is provided by some interface */ for (i = 0; i < udev->config->desc.bNumInterfaces; i++) { @@ -3369,15 +3311,11 @@ static int em28xx_usb_probe(struct usb_interface *interface, /* save our data pointer in this interface device */ usb_set_intfdata(interface, dev); - /* initialize videobuf2 stuff */ - em28xx_vb2_setup(dev); - /* allocate device struct */ mutex_init(&dev->lock); - mutex_lock(&dev->lock); retval = em28xx_init_dev(dev, udev, interface, nr); if (retval) { - goto unlock_and_free; + goto err_free; } if (usb_xfer_mode < 0) { @@ -3402,26 +3340,6 @@ static int em28xx_usb_probe(struct usb_interface *interface, em28xx_info("dvb set to %s mode.\n", dev->dvb_xfer_bulk ? "bulk" : "isoc"); - - /* pre-allocate DVB usb transfer buffers */ - if (dev->dvb_xfer_bulk) { - retval = em28xx_alloc_urbs(dev, EM28XX_DIGITAL_MODE, - dev->dvb_xfer_bulk, - EM28XX_DVB_NUM_BUFS, - 512, - EM28XX_DVB_BULK_PACKET_MULTIPLIER); - } else { - retval = em28xx_alloc_urbs(dev, EM28XX_DIGITAL_MODE, - dev->dvb_xfer_bulk, - EM28XX_DVB_NUM_BUFS, - dev->dvb_max_pkt_size_isoc, - EM28XX_DVB_NUM_ISOC_PACKETS); - } - if (retval) { - printk(DRIVER_NAME - ": Failed to pre-allocate USB transfer buffers for DVB.\n"); - goto unlock_and_free; - } } request_modules(dev); @@ -3429,19 +3347,15 @@ static int em28xx_usb_probe(struct usb_interface *interface, /* Should be the last thing to do, to avoid newer udev's to open the device before fully initializing it */ - mutex_unlock(&dev->lock); return 0; -unlock_and_free: - mutex_unlock(&dev->lock); - err_free: kfree(dev->alt_max_pkt_size_isoc); kfree(dev); err: - clear_bit(nr, &em28xx_devused); + clear_bit(nr, em28xx_devused); err_no_slot: usb_put_dev(udev); @@ -3465,36 +3379,13 @@ static void em28xx_usb_disconnect(struct usb_interface *interface) dev->disconnected = 1; - if (dev->is_audio_only) { - mutex_lock(&dev->lock); - em28xx_close_extension(dev); - mutex_unlock(&dev->lock); - return; - } - - em28xx_info("disconnecting %s\n", dev->vdev->name); + em28xx_info("Disconnecting %s\n", dev->name); flush_request_modules(dev); - mutex_lock(&dev->lock); - - v4l2_device_disconnect(&dev->v4l2_dev); - - if (dev->users) { - em28xx_warn("device %s is open! Deregistration and memory deallocation are deferred on close.\n", - video_device_node_name(dev->vdev)); - - em28xx_uninit_usb_xfer(dev, EM28XX_ANALOG_MODE); - em28xx_uninit_usb_xfer(dev, EM28XX_DIGITAL_MODE); - } - em28xx_close_extension(dev); - /* NOTE: must be called BEFORE the resources are released */ - - if (!dev->users) - em28xx_release_resources(dev); - mutex_unlock(&dev->lock); + em28xx_release_resources(dev); if (!dev->users) { kfree(dev->alt_max_pkt_size_isoc); |