diff options
Diffstat (limited to 'drivers/media/video/Kconfig')
| -rw-r--r-- | drivers/media/video/Kconfig | 427 |
1 files changed, 248 insertions, 179 deletions
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index b303a3f8a9f8..9adada0d7447 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -533,6 +533,13 @@ config VIDEO_ADP1653 This is a driver for the ADP1653 flash controller. It is used for example in Nokia N900. +config VIDEO_AS3645A + tristate "AS3645A flash driver support" + depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER + ---help--- + This is a driver for the AS3645A and LM3555 flash controllers. It has + build in control for flash, torch and indicator LEDs. + comment "Video improvement chips" config VIDEO_UPD64031A @@ -580,25 +587,6 @@ config VIDEO_M52790 endmenu # encoder / decoder chips -config VIDEO_SH_VOU - tristate "SuperH VOU video output driver" - depends on VIDEO_DEV && ARCH_SHMOBILE - select VIDEOBUF_DMA_CONTIG - help - Support for the Video Output Unit (VOU) on SuperH SoCs. - -config VIDEO_VIU - tristate "Freescale VIU Video Driver" - depends on VIDEO_V4L2 && PPC_MPC512x - select VIDEOBUF_DMA_CONTIG - default y - ---help--- - Support for Freescale VIU video driver. This device captures - video data, or overlays video on DIU frame buffer. - - Say Y here if you want to enable VIU device on MPC5121e Rev2+. - In doubt, say N. - config VIDEO_VIVI tristate "Virtual Video Driver" depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64 @@ -613,66 +601,130 @@ config VIDEO_VIVI Say Y here if you want to test video apps or debug V4L devices. In doubt, say N. -source "drivers/media/video/davinci/Kconfig" +# +# USB Multimedia device configuration +# -source "drivers/media/video/omap/Kconfig" +menuconfig V4L_USB_DRIVERS + bool "V4L USB devices" + depends on USB + default y -source "drivers/media/video/bt8xx/Kconfig" +if V4L_USB_DRIVERS -config VIDEO_PMS - tristate "Mediavision Pro Movie Studio Video For Linux" - depends on ISA && VIDEO_V4L2 - help - Say Y if you have such a thing. +source "drivers/media/video/uvc/Kconfig" + +source "drivers/media/video/gspca/Kconfig" + +source "drivers/media/video/pvrusb2/Kconfig" + +source "drivers/media/video/hdpvr/Kconfig" + +source "drivers/media/video/em28xx/Kconfig" + +source "drivers/media/video/tlg2300/Kconfig" + +source "drivers/media/video/cx231xx/Kconfig" + +source "drivers/media/video/tm6000/Kconfig" + +source "drivers/media/video/usbvision/Kconfig" + +source "drivers/media/video/et61x251/Kconfig" + +source "drivers/media/video/sn9c102/Kconfig" + +source "drivers/media/video/pwc/Kconfig" + +source "drivers/media/video/cpia2/Kconfig" + +config USB_ZR364XX + tristate "USB ZR364XX Camera support" + depends on VIDEO_V4L2 + select VIDEOBUF_GEN + select VIDEOBUF_VMALLOC + ---help--- + Say Y here if you want to connect this type of camera to your + computer's USB port. + See <file:Documentation/video4linux/zr364xx.txt> for more info + and list of supported cameras. To compile this driver as a module, choose M here: the - module will be called pms. + module will be called zr364xx. -config VIDEO_BWQCAM - tristate "Quickcam BW Video For Linux" - depends on PARPORT && VIDEO_V4L2 - help - Say Y have if you the black and white version of the QuickCam - camera. See the next option for the color version. +config USB_STKWEBCAM + tristate "USB Syntek DC1125 Camera support" + depends on VIDEO_V4L2 && EXPERIMENTAL + ---help--- + Say Y here if you want to use this type of camera. + Supported devices are typically found in some Asus laptops, + with USB id 174f:a311 and 05e1:0501. Other Syntek cameras + may be supported by the stk11xx driver, from which this is + derived, see <http://sourceforge.net/projects/syntekdriver/> To compile this driver as a module, choose M here: the - module will be called bw-qcam. + module will be called stkwebcam. -config VIDEO_CQCAM - tristate "QuickCam Colour Video For Linux (EXPERIMENTAL)" - depends on EXPERIMENTAL && PARPORT && VIDEO_V4L2 +config USB_S2255 + tristate "USB Sensoray 2255 video capture device" + depends on VIDEO_V4L2 + select VIDEOBUF_VMALLOC + default n help - This is the video4linux driver for the colour version of the - Connectix QuickCam. If you have one of these cameras, say Y here, - otherwise say N. This driver does not work with the original - monochrome QuickCam, QuickCam VC or QuickClip. It is also available - as a module (c-qcam). - Read <file:Documentation/video4linux/CQcam.txt> for more information. + Say Y here if you want support for the Sensoray 2255 USB device. + This driver can be compiled as a module, called s2255drv. -config VIDEO_W9966 - tristate "W9966CF Webcam (FlyCam Supra and others) Video For Linux" - depends on PARPORT_1284 && PARPORT && VIDEO_V4L2 - help - Video4linux driver for Winbond's w9966 based Webcams. - Currently tested with the LifeView FlyCam Supra. - If you have one of these cameras, say Y here - otherwise say N. - This driver is also available as a module (w9966). +endif # V4L_USB_DRIVERS - Check out <file:Documentation/video4linux/w9966.txt> for more - information. +# +# PCI drivers configuration +# -source "drivers/media/video/cpia2/Kconfig" +menuconfig V4L_PCI_DRIVERS + bool "V4L PCI(e) devices" + depends on PCI + default y + ---help--- + Say Y here to enable support for these PCI(e) drivers. -config VIDEO_VINO - tristate "SGI Vino Video For Linux (EXPERIMENTAL)" - depends on I2C && SGI_IP22 && EXPERIMENTAL && VIDEO_V4L2 - select VIDEO_SAA7191 if VIDEO_HELPER_CHIPS_AUTO - help - Say Y here to build in support for the Vino video input system found - on SGI Indy machines. +if V4L_PCI_DRIVERS -source "drivers/media/video/zoran/Kconfig" +source "drivers/media/video/au0828/Kconfig" + +source "drivers/media/video/bt8xx/Kconfig" + +source "drivers/media/video/cx18/Kconfig" + +source "drivers/media/video/cx23885/Kconfig" + +source "drivers/media/video/cx25821/Kconfig" + +source "drivers/media/video/cx88/Kconfig" + +config VIDEO_HEXIUM_GEMINI + tristate "Hexium Gemini frame grabber" + depends on PCI && VIDEO_V4L2 && I2C + select VIDEO_SAA7146_VV + ---help--- + This is a video4linux driver for the Hexium Gemini frame + grabber card by Hexium. Please note that the Gemini Dual + card is *not* fully supported. + + To compile this driver as a module, choose M here: the + module will be called hexium_gemini. + +config VIDEO_HEXIUM_ORION + tristate "Hexium HV-PCI6 and Orion frame grabber" + depends on PCI && VIDEO_V4L2 && I2C + select VIDEO_SAA7146_VV + ---help--- + This is a video4linux driver for the Hexium HV-PCI6 and + Orion frame grabber cards by Hexium. + + To compile this driver as a module, choose M here: the + module will be called hexium_orion. + +source "drivers/media/video/ivtv/Kconfig" config VIDEO_MEYE tristate "Sony Vaio Picturebook Motion Eye Video For Linux" @@ -688,8 +740,6 @@ config VIDEO_MEYE To compile this driver as a module, choose M here: the module will be called meye. -source "drivers/media/video/saa7134/Kconfig" - config VIDEO_MXB tristate "Siemens-Nixdorf 'Multimedia eXtension Board'" depends on PCI && VIDEO_V4L2 && I2C @@ -706,28 +756,119 @@ config VIDEO_MXB To compile this driver as a module, choose M here: the module will be called mxb. -config VIDEO_HEXIUM_ORION - tristate "Hexium HV-PCI6 and Orion frame grabber" - depends on PCI && VIDEO_V4L2 && I2C - select VIDEO_SAA7146_VV +source "drivers/media/video/saa7134/Kconfig" + +source "drivers/media/video/saa7164/Kconfig" + +source "drivers/media/video/zoran/Kconfig" + +endif # V4L_PCI_DRIVERS + +# +# ISA & parallel port drivers configuration +# + +menuconfig V4L_ISA_PARPORT_DRIVERS + bool "V4L ISA and parallel port devices" + depends on ISA || PARPORT + default n ---help--- - This is a video4linux driver for the Hexium HV-PCI6 and - Orion frame grabber cards by Hexium. + Say Y here to enable support for these ISA and parallel port drivers. + +if V4L_ISA_PARPORT_DRIVERS + +config VIDEO_BWQCAM + tristate "Quickcam BW Video For Linux" + depends on PARPORT && VIDEO_V4L2 + help + Say Y have if you the black and white version of the QuickCam + camera. See the next option for the color version. To compile this driver as a module, choose M here: the - module will be called hexium_orion. + module will be called bw-qcam. -config VIDEO_HEXIUM_GEMINI - tristate "Hexium Gemini frame grabber" - depends on PCI && VIDEO_V4L2 && I2C - select VIDEO_SAA7146_VV - ---help--- - This is a video4linux driver for the Hexium Gemini frame - grabber card by Hexium. Please note that the Gemini Dual - card is *not* fully supported. +config VIDEO_CQCAM + tristate "QuickCam Colour Video For Linux" + depends on PARPORT && VIDEO_V4L2 + help + This is the video4linux driver for the colour version of the + Connectix QuickCam. If you have one of these cameras, say Y here, + otherwise say N. This driver does not work with the original + monochrome QuickCam, QuickCam VC or QuickClip. It is also available + as a module (c-qcam). + Read <file:Documentation/video4linux/CQcam.txt> for more information. + +config VIDEO_PMS + tristate "Mediavision Pro Movie Studio Video For Linux" + depends on ISA && VIDEO_V4L2 + help + Say Y if you have the ISA Mediavision Pro Movie Studio + capture card. To compile this driver as a module, choose M here: the - module will be called hexium_gemini. + module will be called pms. + +config VIDEO_W9966 + tristate "W9966CF Webcam (FlyCam Supra and others) Video For Linux" + depends on PARPORT_1284 && PARPORT && VIDEO_V4L2 + help + Video4linux driver for Winbond's w9966 based Webcams. + Currently tested with the LifeView FlyCam Supra. + If you have one of these cameras, say Y here + otherwise say N. + This driver is also available as a module (w9966). + + Check out <file:Documentation/video4linux/w9966.txt> for more + information. + +endif # V4L_ISA_PARPORT_DRIVERS + +menuconfig V4L_PLATFORM_DRIVERS + bool "V4L platform devices" + default n + ---help--- + Say Y here to enable support for platform-specific V4L drivers. + +if V4L_PLATFORM_DRIVERS + +source "drivers/media/video/marvell-ccic/Kconfig" + +config VIDEO_VIA_CAMERA + tristate "VIAFB camera controller support" + depends on FB_VIA + select VIDEOBUF_DMA_SG + select VIDEO_OV7670 + help + Driver support for the integrated camera controller in VIA + Chrome9 chipsets. Currently only tested on OLPC xo-1.5 systems + with ov7670 sensors. + +# +# Platform multimedia device configuration +# + +source "drivers/media/video/davinci/Kconfig" + +source "drivers/media/video/omap/Kconfig" + +config VIDEO_SH_VOU + tristate "SuperH VOU video output driver" + depends on VIDEO_DEV && ARCH_SHMOBILE + select VIDEOBUF_DMA_CONTIG + help + Support for the Video Output Unit (VOU) on SuperH SoCs. + +config VIDEO_VIU + tristate "Freescale VIU Video Driver" + depends on VIDEO_V4L2 && PPC_MPC512x + select VIDEOBUF_DMA_CONTIG + default y + ---help--- + Support for Freescale VIU video driver. This device captures + video data, or overlays video on DIU frame buffer. + + Say Y here if you want to enable VIU device on MPC5121e Rev2+. + In doubt, say N. config VIDEO_TIMBERDALE tristate "Support for timberdale Video In/LogiWIN" @@ -739,21 +880,13 @@ config VIDEO_TIMBERDALE ---help--- Add support for the Video In peripherial of the timberdale FPGA. -source "drivers/media/video/cx88/Kconfig" - -source "drivers/media/video/cx23885/Kconfig" - -source "drivers/media/video/cx25821/Kconfig" - -source "drivers/media/video/au0828/Kconfig" - -source "drivers/media/video/ivtv/Kconfig" - -source "drivers/media/video/cx18/Kconfig" - -source "drivers/media/video/saa7164/Kconfig" - -source "drivers/media/video/marvell-ccic/Kconfig" +config VIDEO_VINO + tristate "SGI Vino Video For Linux" + depends on I2C && SGI_IP22 && VIDEO_V4L2 + select VIDEO_SAA7191 if VIDEO_HELPER_CHIPS_AUTO + help + Say Y here to build in support for the Vino video input system found + on SGI Indy machines. config VIDEO_M32R_AR tristate "AR devices" @@ -774,16 +907,6 @@ config VIDEO_M32R_AR_M64278 To compile this driver as a module, choose M here: the module will be called arv. -config VIDEO_VIA_CAMERA - tristate "VIAFB camera controller support" - depends on FB_VIA - select VIDEOBUF_DMA_SG - select VIDEO_OV7670 - help - Driver support for the integrated camera controller in VIA - Chrome9 chipsets. Currently only tested on OLPC xo-1.5 systems - with ov7670 sensors. - config VIDEO_OMAP3 tristate "OMAP 3 Camera support (EXPERIMENTAL)" depends on OMAP_IOVMM && VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API && ARCH_OMAP3 && EXPERIMENTAL @@ -1002,78 +1125,7 @@ config VIDEO_S5P_MIPI_CSIS source "drivers/media/video/s5p-tv/Kconfig" -# -# USB Multimedia device configuration -# - -menuconfig V4L_USB_DRIVERS - bool "V4L USB devices" - depends on USB - default y - -if V4L_USB_DRIVERS && USB - -source "drivers/media/video/uvc/Kconfig" - -source "drivers/media/video/gspca/Kconfig" - -source "drivers/media/video/pvrusb2/Kconfig" - -source "drivers/media/video/hdpvr/Kconfig" - -source "drivers/media/video/em28xx/Kconfig" - -source "drivers/media/video/tlg2300/Kconfig" - -source "drivers/media/video/cx231xx/Kconfig" - -source "drivers/media/video/tm6000/Kconfig" - -source "drivers/media/video/usbvision/Kconfig" - -source "drivers/media/video/et61x251/Kconfig" - -source "drivers/media/video/sn9c102/Kconfig" - -source "drivers/media/video/pwc/Kconfig" - -config USB_ZR364XX - tristate "USB ZR364XX Camera support" - depends on VIDEO_V4L2 - select VIDEOBUF_GEN - select VIDEOBUF_VMALLOC - ---help--- - Say Y here if you want to connect this type of camera to your - computer's USB port. - See <file:Documentation/video4linux/zr364xx.txt> for more info - and list of supported cameras. - - To compile this driver as a module, choose M here: the - module will be called zr364xx. - -config USB_STKWEBCAM - tristate "USB Syntek DC1125 Camera support" - depends on VIDEO_V4L2 && EXPERIMENTAL - ---help--- - Say Y here if you want to use this type of camera. - Supported devices are typically found in some Asus laptops, - with USB id 174f:a311 and 05e1:0501. Other Syntek cameras - may be supported by the stk11xx driver, from which this is - derived, see <http://sourceforge.net/projects/syntekdriver/> - - To compile this driver as a module, choose M here: the - module will be called stkwebcam. - -config USB_S2255 - tristate "USB Sensoray 2255 video capture device" - depends on VIDEO_V4L2 - select VIDEOBUF_VMALLOC - default n - help - Say Y here if you want support for the Sensoray 2255 USB device. - This driver can be compiled as a module, called s2255drv. - -endif # V4L_USB_DRIVERS +endif # V4L_PLATFORM_DRIVERS endif # VIDEO_CAPTURE_DRIVERS menuconfig V4L_MEM2MEM_DRIVERS @@ -1098,6 +1150,23 @@ config VIDEO_MEM2MEM_TESTDEV This is a virtual test device for the memory-to-memory driver framework. +config VIDEO_SAMSUNG_S5P_G2D + tristate "Samsung S5P and EXYNOS4 G2D 2d graphics accelerator driver" + depends on VIDEO_DEV && VIDEO_V4L2 && PLAT_S5P + select VIDEOBUF2_DMA_CONTIG + select V4L2_MEM2MEM_DEV + default n + ---help--- + This is a v4l2 driver for Samsung S5P and EXYNOS4 G2D + 2d graphics accelerator. + +config VIDEO_SAMSUNG_S5P_JPEG + tristate "Samsung S5P/Exynos4 JPEG codec driver (EXPERIMENTAL)" + depends on VIDEO_DEV && VIDEO_V4L2 && PLAT_S5P && EXPERIMENTAL + select VIDEOBUF2_DMA_CONTIG + select V4L2_MEM2MEM_DEV + ---help--- + This is a v4l2 driver for Samsung S5P and EXYNOS4 JPEG codec config VIDEO_SAMSUNG_S5P_MFC tristate "Samsung S5P MFC 5.1 Video Codec" |