diff options
Diffstat (limited to 'drivers/mtd')
44 files changed, 2490 insertions, 236 deletions
diff --git a/drivers/mtd/bcm47xxpart.c b/drivers/mtd/bcm47xxpart.c index 283ff7e17a0f..d10fa6c8f074 100644 --- a/drivers/mtd/bcm47xxpart.c +++ b/drivers/mtd/bcm47xxpart.c @@ -9,6 +9,7 @@ * */ +#include <linux/bcm47xx_nvram.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/slab.h> @@ -83,6 +84,91 @@ out_default: return "rootfs"; } +static int bcm47xxpart_parse_trx(struct mtd_info *master, + struct mtd_partition *trx, + struct mtd_partition *parts, + size_t parts_len) +{ + struct trx_header header; + size_t bytes_read; + int curr_part = 0; + int i, err; + + if (parts_len < 3) { + pr_warn("No enough space to add TRX partitions!\n"); + return -ENOMEM; + } + + err = mtd_read(master, trx->offset, sizeof(header), &bytes_read, + (uint8_t *)&header); + if (err && !mtd_is_bitflip(err)) { + pr_err("mtd_read error while reading TRX header: %d\n", err); + return err; + } + + i = 0; + + /* We have LZMA loader if offset[2] points to sth */ + if (header.offset[2]) { + bcm47xxpart_add_part(&parts[curr_part++], "loader", + trx->offset + header.offset[i], 0); + i++; + } + + if (header.offset[i]) { + bcm47xxpart_add_part(&parts[curr_part++], "linux", + trx->offset + header.offset[i], 0); + i++; + } + + if (header.offset[i]) { + size_t offset = trx->offset + header.offset[i]; + const char *name = bcm47xxpart_trx_data_part_name(master, + offset); + + bcm47xxpart_add_part(&parts[curr_part++], name, offset, 0); + i++; + } + + /* + * Assume that every partition ends at the beginning of the one it is + * followed by. + */ + for (i = 0; i < curr_part; i++) { + u64 next_part_offset = (i < curr_part - 1) ? + parts[i + 1].offset : + trx->offset + trx->size; + + parts[i].size = next_part_offset - parts[i].offset; + } + + return curr_part; +} + +/** + * bcm47xxpart_bootpartition - gets index of TRX partition used by bootloader + * + * Some devices may have more than one TRX partition. In such case one of them + * is the main one and another a failsafe one. Bootloader may fallback to the + * failsafe firmware if it detects corruption of the main image. + * + * This function provides info about currently used TRX partition. It's the one + * containing kernel started by the bootloader. + */ +static int bcm47xxpart_bootpartition(void) +{ + char buf[4]; + int bootpartition; + + /* Check CFE environment variable */ + if (bcm47xx_nvram_getenv("bootpartition", buf, sizeof(buf)) > 0) { + if (!kstrtoint(buf, 0, &bootpartition)) + return bootpartition; + } + + return 0; +} + static int bcm47xxpart_parse(struct mtd_info *master, const struct mtd_partition **pparts, struct mtd_part_parser_data *data) @@ -93,9 +179,8 @@ static int bcm47xxpart_parse(struct mtd_info *master, size_t bytes_read; uint32_t offset; uint32_t blocksize = master->erasesize; - struct trx_header *trx; - int trx_part = -1; - int last_trx_part = -1; + int trx_parts[2]; /* Array with indexes of TRX partitions */ + int trx_num = 0; /* Number of found TRX partitions */ int possible_nvram_sizes[] = { 0x8000, 0xF000, 0x10000, }; int err; @@ -182,54 +267,18 @@ static int bcm47xxpart_parse(struct mtd_info *master, /* TRX */ if (buf[0x000 / 4] == TRX_MAGIC) { - if (BCM47XXPART_MAX_PARTS - curr_part < 4) { - pr_warn("Not enough partitions left to register trx, scanning stopped!\n"); - break; - } - - trx = (struct trx_header *)buf; + struct trx_header *trx; - trx_part = curr_part; + if (trx_num >= ARRAY_SIZE(trx_parts)) + pr_warn("No enough space to store another TRX found at 0x%X\n", + offset); + else + trx_parts[trx_num++] = curr_part; bcm47xxpart_add_part(&parts[curr_part++], "firmware", offset, 0); - i = 0; - /* We have LZMA loader if offset[2] points to sth */ - if (trx->offset[2]) { - bcm47xxpart_add_part(&parts[curr_part++], - "loader", - offset + trx->offset[i], - 0); - i++; - } - - if (trx->offset[i]) { - bcm47xxpart_add_part(&parts[curr_part++], - "linux", - offset + trx->offset[i], - 0); - i++; - } - - /* - * Pure rootfs size is known and can be calculated as: - * trx->length - trx->offset[i]. We don't fill it as - * we want to have jffs2 (overlay) in the same mtd. - */ - if (trx->offset[i]) { - const char *name; - - name = bcm47xxpart_trx_data_part_name(master, offset + trx->offset[i]); - bcm47xxpart_add_part(&parts[curr_part++], - name, - offset + trx->offset[i], - 0); - i++; - } - - last_trx_part = curr_part - 1; - /* Jump to the end of TRX */ + trx = (struct trx_header *)buf; offset = roundup(offset + trx->length, blocksize); /* Next loop iteration will increase the offset */ offset -= blocksize; @@ -307,9 +356,23 @@ static int bcm47xxpart_parse(struct mtd_info *master, parts[i + 1].offset : master->size; parts[i].size = next_part_offset - parts[i].offset; - if (i == last_trx_part && trx_part >= 0) - parts[trx_part].size = next_part_offset - - parts[trx_part].offset; + } + + /* If there was TRX parse it now */ + for (i = 0; i < trx_num; i++) { + struct mtd_partition *trx = &parts[trx_parts[i]]; + + if (i == bcm47xxpart_bootpartition()) { + int num_parts; + + num_parts = bcm47xxpart_parse_trx(master, trx, + parts + curr_part, + BCM47XXPART_MAX_PARTS - curr_part); + if (num_parts > 0) + curr_part += num_parts; + } else { + trx->name = "failsafe"; + } } *pparts = parts; diff --git a/drivers/mtd/devices/bcm47xxsflash.c b/drivers/mtd/devices/bcm47xxsflash.c index 514be04c0b6c..e2bd81817df4 100644 --- a/drivers/mtd/devices/bcm47xxsflash.c +++ b/drivers/mtd/devices/bcm47xxsflash.c @@ -105,15 +105,33 @@ static int bcm47xxsflash_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf) { struct bcm47xxsflash *b47s = mtd->priv; + size_t orig_len = len; /* Check address range */ if ((from + len) > mtd->size) return -EINVAL; - memcpy_fromio(buf, b47s->window + from, len); - *retlen = len; + /* Read as much as possible using fast MMIO window */ + if (from < BCM47XXSFLASH_WINDOW_SZ) { + size_t memcpy_len; - return len; + memcpy_len = min(len, (size_t)(BCM47XXSFLASH_WINDOW_SZ - from)); + memcpy_fromio(buf, b47s->window + from, memcpy_len); + from += memcpy_len; + len -= memcpy_len; + buf += memcpy_len; + } + + /* Use indirect access for content out of the window */ + for (; len; len--) { + b47s->cc_write(b47s, BCMA_CC_FLASHADDR, from++); + bcm47xxsflash_cmd(b47s, OPCODE_ST_READ4B); + *buf++ = b47s->cc_read(b47s, BCMA_CC_FLASHDATA); + } + + *retlen = orig_len; + + return orig_len; } static int bcm47xxsflash_write_st(struct mtd_info *mtd, u32 offset, size_t len, @@ -284,7 +302,6 @@ static int bcm47xxsflash_bcma_probe(struct platform_device *pdev) b47s = devm_kzalloc(dev, sizeof(*b47s), GFP_KERNEL); if (!b47s) return -ENOMEM; - sflash->priv = b47s; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { @@ -334,6 +351,8 @@ static int bcm47xxsflash_bcma_probe(struct platform_device *pdev) b47s->size = sflash->size; bcm47xxsflash_fill_mtd(b47s, &pdev->dev); + platform_set_drvdata(pdev, b47s); + err = mtd_device_parse_register(&b47s->mtd, probes, NULL, NULL, 0); if (err) { pr_err("Failed to register MTD device: %d\n", err); @@ -349,8 +368,7 @@ static int bcm47xxsflash_bcma_probe(struct platform_device *pdev) static int bcm47xxsflash_bcma_remove(struct platform_device *pdev) { - struct bcma_sflash *sflash = dev_get_platdata(&pdev->dev); - struct bcm47xxsflash *b47s = sflash->priv; + struct bcm47xxsflash *b47s = platform_get_drvdata(pdev); mtd_device_unregister(&b47s->mtd); iounmap(b47s->window); diff --git a/drivers/mtd/devices/bcm47xxsflash.h b/drivers/mtd/devices/bcm47xxsflash.h index 1564b62b412e..b2d7b38f75fd 100644 --- a/drivers/mtd/devices/bcm47xxsflash.h +++ b/drivers/mtd/devices/bcm47xxsflash.h @@ -3,6 +3,8 @@ #include <linux/mtd/mtd.h> +#define BCM47XXSFLASH_WINDOW_SZ SZ_16M + /* Used for ST flashes only. */ #define OPCODE_ST_WREN 0x0006 /* Write Enable */ #define OPCODE_ST_WRDIS 0x0004 /* Write Disable */ @@ -16,6 +18,7 @@ #define OPCODE_ST_RES 0x03ab /* Read Electronic Signature */ #define OPCODE_ST_CSA 0x1000 /* Keep chip select asserted */ #define OPCODE_ST_SSE 0x0220 /* Sub-sector Erase */ +#define OPCODE_ST_READ4B 0x6313 /* Read Data Bytes in 4Byte addressing mode */ /* Used for Atmel flashes only. */ #define OPCODE_AT_READ 0x07e8 diff --git a/drivers/mtd/devices/lart.c b/drivers/mtd/devices/lart.c index 82bd00af5cc3..268aae45b514 100644 --- a/drivers/mtd/devices/lart.c +++ b/drivers/mtd/devices/lart.c @@ -75,18 +75,18 @@ static char module_name[] = "lart"; /* blob */ #define NUM_BLOB_BLOCKS FLASH_NUMBLOCKS_16m_PARAM -#define BLOB_START 0x00000000 -#define BLOB_LEN (NUM_BLOB_BLOCKS * FLASH_BLOCKSIZE_PARAM) +#define PART_BLOB_START 0x00000000 +#define PART_BLOB_LEN (NUM_BLOB_BLOCKS * FLASH_BLOCKSIZE_PARAM) /* kernel */ #define NUM_KERNEL_BLOCKS 7 -#define KERNEL_START (BLOB_START + BLOB_LEN) -#define KERNEL_LEN (NUM_KERNEL_BLOCKS * FLASH_BLOCKSIZE_MAIN) +#define PART_KERNEL_START (PART_BLOB_START + PART_BLOB_LEN) +#define PART_KERNEL_LEN (NUM_KERNEL_BLOCKS * FLASH_BLOCKSIZE_MAIN) /* initial ramdisk */ #define NUM_INITRD_BLOCKS 24 -#define INITRD_START (KERNEL_START + KERNEL_LEN) -#define INITRD_LEN (NUM_INITRD_BLOCKS * FLASH_BLOCKSIZE_MAIN) +#define PART_INITRD_START (PART_KERNEL_START + PART_KERNEL_LEN) +#define PART_INITRD_LEN (NUM_INITRD_BLOCKS * FLASH_BLOCKSIZE_MAIN) /* * See section 4.0 in "3 Volt Fast Boot Block Flash Memory" Intel Datasheet @@ -587,20 +587,20 @@ static struct mtd_partition lart_partitions[] = { /* blob */ { .name = "blob", - .offset = BLOB_START, - .size = BLOB_LEN, + .offset = PART_BLOB_START, + .size = PART_BLOB_LEN, }, /* kernel */ { .name = "kernel", - .offset = KERNEL_START, /* MTDPART_OFS_APPEND */ - .size = KERNEL_LEN, + .offset = PART_KERNEL_START, /* MTDPART_OFS_APPEND */ + .size = PART_KERNEL_LEN, }, /* initial ramdisk / file system */ { .name = "file system", - .offset = INITRD_START, /* MTDPART_OFS_APPEND */ - .size = INITRD_LEN, /* MTDPART_SIZ_FULL */ + .offset = PART_INITRD_START, /* MTDPART_OFS_APPEND */ + .size = PART_INITRD_LEN, /* MTDPART_SIZ_FULL */ } }; #define NUM_PARTITIONS ARRAY_SIZE(lart_partitions) diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index 9cf7fcd28034..c4df3b1bded0 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -172,7 +172,8 @@ static ssize_t m25p80_read(struct spi_nor *nor, loff_t from, size_t len, t[1].rx_buf = buf; t[1].rx_nbits = m25p80_rx_nbits(nor); - t[1].len = min(len, spi_max_transfer_size(spi)); + t[1].len = min3(len, spi_max_transfer_size(spi), + spi_max_message_size(spi) - t[0].len); spi_message_add_tail(&t[1], &m); ret = spi_sync(spi, &m); @@ -288,7 +289,6 @@ static const struct spi_device_id m25p_ids[] = { * should be kept for backward compatibility. */ {"at25df321a"}, {"at25df641"}, {"at26df081a"}, - {"mr25h256"}, {"mx25l4005a"}, {"mx25l1606e"}, {"mx25l6405d"}, {"mx25l12805d"}, {"mx25l25635e"},{"mx66l51235l"}, {"n25q064"}, {"n25q128a11"}, {"n25q128a13"}, {"n25q512a"}, @@ -305,6 +305,11 @@ static const struct spi_device_id m25p_ids[] = { {"m25p40-nonjedec"}, {"m25p80-nonjedec"}, {"m25p16-nonjedec"}, {"m25p32-nonjedec"}, {"m25p64-nonjedec"}, {"m25p128-nonjedec"}, + /* Everspin MRAMs (non-JEDEC) */ + { "mr25h256" }, /* 256 Kib, 40 MHz */ + { "mr25h10" }, /* 1 Mib, 40 MHz */ + { "mr25h40" }, /* 4 Mib, 40 MHz */ + { }, }; MODULE_DEVICE_TABLE(spi, m25p_ids); diff --git a/drivers/mtd/devices/serial_flash_cmds.h b/drivers/mtd/devices/serial_flash_cmds.h index f59a125295d0..8b81e15105dd 100644 --- a/drivers/mtd/devices/serial_flash_cmds.h +++ b/drivers/mtd/devices/serial_flash_cmds.h @@ -18,19 +18,12 @@ #define SPINOR_OP_RDVCR 0x85 /* JEDEC Standard - Serial Flash Discoverable Parmeters (SFDP) Commands */ -#define SPINOR_OP_READ_1_2_2 0xbb /* DUAL I/O READ */ -#define SPINOR_OP_READ_1_4_4 0xeb /* QUAD I/O READ */ - #define SPINOR_OP_WRITE 0x02 /* PAGE PROGRAM */ #define SPINOR_OP_WRITE_1_1_2 0xa2 /* DUAL INPUT PROGRAM */ #define SPINOR_OP_WRITE_1_2_2 0xd2 /* DUAL INPUT EXT PROGRAM */ #define SPINOR_OP_WRITE_1_1_4 0x32 /* QUAD INPUT PROGRAM */ #define SPINOR_OP_WRITE_1_4_4 0x12 /* QUAD INPUT EXT PROGRAM */ -/* READ commands with 32-bit addressing */ -#define SPINOR_OP_READ4_1_2_2 0xbc -#define SPINOR_OP_READ4_1_4_4 0xec - /* Configuration flags */ #define FLASH_FLAG_SINGLE 0x000000ff #define FLASH_FLAG_READ_WRITE 0x00000001 diff --git a/drivers/mtd/devices/st_spi_fsm.c b/drivers/mtd/devices/st_spi_fsm.c index 5454b4113589..804313a33f2b 100644 --- a/drivers/mtd/devices/st_spi_fsm.c +++ b/drivers/mtd/devices/st_spi_fsm.c @@ -507,13 +507,13 @@ static struct seq_rw_config n25q_read3_configs[] = { * - 'FAST' variants configured for 8 dummy cycles (see note above.) */ static struct seq_rw_config n25q_read4_configs[] = { - {FLASH_FLAG_READ_1_4_4, SPINOR_OP_READ4_1_4_4, 0, 4, 4, 0x00, 0, 8}, - {FLASH_FLAG_READ_1_1_4, SPINOR_OP_READ4_1_1_4, 0, 1, 4, 0x00, 0, 8}, - {FLASH_FLAG_READ_1_2_2, SPINOR_OP_READ4_1_2_2, 0, 2, 2, 0x00, 0, 8}, - {FLASH_FLAG_READ_1_1_2, SPINOR_OP_READ4_1_1_2, 0, 1, 2, 0x00, 0, 8}, - {FLASH_FLAG_READ_FAST, SPINOR_OP_READ4_FAST, 0, 1, 1, 0x00, 0, 8}, - {FLASH_FLAG_READ_WRITE, SPINOR_OP_READ4, 0, 1, 1, 0x00, 0, 0}, - {0x00, 0, 0, 0, 0, 0x00, 0, 0}, + {FLASH_FLAG_READ_1_4_4, SPINOR_OP_READ_1_4_4_4B, 0, 4, 4, 0x00, 0, 8}, + {FLASH_FLAG_READ_1_1_4, SPINOR_OP_READ_1_1_4_4B, 0, 1, 4, 0x00, 0, 8}, + {FLASH_FLAG_READ_1_2_2, SPINOR_OP_READ_1_2_2_4B, 0, 2, 2, 0x00, 0, 8}, + {FLASH_FLAG_READ_1_1_2, SPINOR_OP_READ_1_1_2_4B, 0, 1, 2, 0x00, 0, 8}, + {FLASH_FLAG_READ_FAST, SPINOR_OP_READ_FAST_4B, 0, 1, 1, 0x00, 0, 8}, + {FLASH_FLAG_READ_WRITE, SPINOR_OP_READ_4B, 0, 1, 1, 0x00, 0, 0}, + {0x00, 0, 0, 0, 0, 0x00, 0, 0}, }; /* @@ -553,13 +553,13 @@ static int stfsm_mx25_en_32bit_addr_seq(struct stfsm_seq *seq) * entering a state that is incompatible with the SPIBoot Controller. */ static struct seq_rw_config stfsm_s25fl_read4_configs[] = { - {FLASH_FLAG_READ_1_4_4, SPINOR_OP_READ4_1_4_4, 0, 4, 4, 0x00, 2, 4}, - {FLASH_FLAG_READ_1_1_4, SPINOR_OP_READ4_1_1_4, 0, 1, 4, 0x00, 0, 8}, - {FLASH_FLAG_READ_1_2_2, SPINOR_OP_READ4_1_2_2, 0, 2, 2, 0x00, 4, 0}, - {FLASH_FLAG_READ_1_1_2, SPINOR_OP_READ4_1_1_2, 0, 1, 2, 0x00, 0, 8}, - {FLASH_FLAG_READ_FAST, SPINOR_OP_READ4_FAST, 0, 1, 1, 0x00, 0, 8}, - {FLASH_FLAG_READ_WRITE, SPINOR_OP_READ4, 0, 1, 1, 0x00, 0, 0}, - {0x00, 0, 0, 0, 0, 0x00, 0, 0}, + {FLASH_FLAG_READ_1_4_4, SPINOR_OP_READ_1_4_4_4B, 0, 4, 4, 0x00, 2, 4}, + {FLASH_FLAG_READ_1_1_4, SPINOR_OP_READ_1_1_4_4B, 0, 1, 4, 0x00, 0, 8}, + {FLASH_FLAG_READ_1_2_2, SPINOR_OP_READ_1_2_2_4B, 0, 2, 2, 0x00, 4, 0}, + {FLASH_FLAG_READ_1_1_2, SPINOR_OP_READ_1_1_2_4B, 0, 1, 2, 0x00, 0, 8}, + {FLASH_FLAG_READ_FAST, SPINOR_OP_READ_FAST_4B, 0, 1, 1, 0x00, 0, 8}, + {FLASH_FLAG_READ_WRITE, SPINOR_OP_READ_4B, 0, 1, 1, 0x00, 0, 0}, + {0x00, 0, 0, 0, 0, 0x00, 0, 0}, }; static struct seq_rw_config stfsm_s25fl_write4_configs[] = { diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index 5bcc896a48c3..542fdf8e81fa 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -75,7 +75,7 @@ config MTD_PHYSMAP_OF taken from OF device tree. config MTD_PHYSMAP_OF_VERSATILE - bool "Support ARM Versatile physmap OF" + bool "ARM Versatile OF-based physical memory map handling" depends on MTD_PHYSMAP_OF depends on MFD_SYSCON default y if (ARCH_INTEGRATOR || ARCH_VERSATILE || ARCH_REALVIEW) @@ -84,6 +84,16 @@ config MTD_PHYSMAP_OF_VERSATILE platforms, basically to add a VPP (write protection) callback so the flash can be taken out of write protection. +config MTD_PHYSMAP_OF_GEMINI + bool "Cortina Gemini OF-based physical memory map handling" + depends on MTD_PHYSMAP_OF + depends on MFD_SYSCON + default ARCH_GEMINI + help + This provides some extra DT physmap parsing for the Gemini + platforms, some detection and setting up parallel mode on the + external interface. + config MTD_PMC_MSP_EVM tristate "CFI Flash device mapped on PMC-Sierra MSP" depends on PMC_MSP && MTD_CFI diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile index 644f7d36d35d..aef1846b4de2 100644 --- a/drivers/mtd/maps/Makefile +++ b/drivers/mtd/maps/Makefile @@ -17,10 +17,13 @@ obj-$(CONFIG_MTD_CK804XROM) += ck804xrom.o obj-$(CONFIG_MTD_TSUNAMI) += tsunami_flash.o obj-$(CONFIG_MTD_PXA2XX) += pxa2xx-flash.o obj-$(CONFIG_MTD_PHYSMAP) += physmap.o -obj-$(CONFIG_MTD_PHYSMAP_OF) += physmap_of.o ifdef CONFIG_MTD_PHYSMAP_OF_VERSATILE -obj-$(CONFIG_MTD_PHYSMAP_OF) += physmap_of_versatile.o +physmap_of-objs += physmap_of_versatile.o +endif +ifdef CONFIG_MTD_PHYSMAP_OF_GEMINI +physmap_of-objs += physmap_of_gemini.o endif +obj-$(CONFIG_MTD_PHYSMAP_OF) += physmap_of.o obj-$(CONFIG_MTD_PISMO) += pismo.o obj-$(CONFIG_MTD_PMC_MSP_EVM) += pmcmsp-flash.o obj-$(CONFIG_MTD_PCMCIA) += pcmciamtd.o diff --git a/drivers/mtd/maps/ichxrom.c b/drivers/mtd/maps/ichxrom.c index e17d02ae03f0..976d42f63aef 100644 --- a/drivers/mtd/maps/ichxrom.c +++ b/drivers/mtd/maps/ichxrom.c @@ -57,10 +57,12 @@ static void ichxrom_cleanup(struct ichxrom_window *window) { struct ichxrom_map_info *map, *scratch; u16 word; + int ret; /* Disable writes through the rom window */ - pci_read_config_word(window->pdev, BIOS_CNTL, &word); - pci_write_config_word(window->pdev, BIOS_CNTL, word & ~1); + ret = pci_read_config_word(window->pdev, BIOS_CNTL, &word); + if (!ret) + pci_write_config_word(window->pdev, BIOS_CNTL, word & ~1); pci_dev_put(window->pdev); /* Free all of the mtd devices */ diff --git a/drivers/mtd/maps/lantiq-flash.c b/drivers/mtd/maps/lantiq-flash.c index c8febb326fa6..3e33ab66eb24 100644 --- a/drivers/mtd/maps/lantiq-flash.c +++ b/drivers/mtd/maps/lantiq-flash.c @@ -4,7 +4,7 @@ * by the Free Software Foundation. * * Copyright (C) 2004 Liu Peng Infineon IFAP DC COM CPE - * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + * Copyright (C) 2010 John Crispin <john@phrozen.org> */ #include <linux/err.h> @@ -209,5 +209,5 @@ static struct platform_driver ltq_mtd_driver = { module_platform_driver(ltq_mtd_driver); MODULE_LICENSE("GPL"); -MODULE_AUTHOR("John Crispin <blogic@openwrt.org>"); +MODULE_AUTHOR("John Crispin <john@phrozen.org>"); MODULE_DESCRIPTION("Lantiq SoC NOR"); diff --git a/drivers/mtd/maps/physmap_of.c b/drivers/mtd/maps/physmap_of.c index 3fad35942895..14e8909c9955 100644 --- a/drivers/mtd/maps/physmap_of.c +++ b/drivers/mtd/maps/physmap_of.c @@ -24,6 +24,7 @@ #include <linux/of_address.h> #include <linux/of_platform.h> #include <linux/slab.h> +#include "physmap_of_gemini.h" #include "physmap_of_versatile.h" struct of_flash_list { @@ -241,11 +242,13 @@ static int of_flash_probe(struct platform_device *dev) info->list[i].map.size = res_size; info->list[i].map.bankwidth = be32_to_cpup(width); info->list[i].map.device_node = dp; + + err = of_flash_probe_gemini(dev, dp, &info->list[i].map); + if (err) + return err; err = of_flash_probe_versatile(dev, dp, &info->list[i].map); - if (err) { - dev_err(&dev->dev, "Can't probe Versatile VPP\n"); + if (err) return err; - } err = -ENOMEM; info->list[i].map.virt = ioremap(info->list[i].map.phys, diff --git a/drivers/mtd/maps/physmap_of_gemini.c b/drivers/mtd/maps/physmap_of_gemini.c new file mode 100644 index 000000000000..9d371cd728ea --- /dev/null +++ b/drivers/mtd/maps/physmap_of_gemini.c @@ -0,0 +1,117 @@ +/* + * Cortina Systems Gemini OF physmap add-on + * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org> + * + * This SoC has an elaborate flash control register, so we need to + * detect and set it up when booting on this platform. + */ +#include <linux/export.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/mtd/map.h> +#include <linux/mfd/syscon.h> +#include <linux/regmap.h> +#include <linux/bitops.h> +#include "physmap_of_gemini.h" + +/* + * The Flash-relevant parts of the global status register + * These would also be relevant for a NAND driver. + */ +#define GLOBAL_STATUS 0x04 +#define FLASH_TYPE_MASK (0x3 << 24) +#define FLASH_TYPE_NAND_2K (0x3 << 24) +#define FLASH_TYPE_NAND_512 (0x2 << 24) +#define FLASH_TYPE_PARALLEL (0x1 << 24) +#define FLASH_TYPE_SERIAL (0x0 << 24) +/* if parallel */ +#define FLASH_WIDTH_16BIT (1 << 23) /* else 8 bit */ +/* if serial */ +#define FLASH_ATMEL (1 << 23) /* else STM */ + +#define FLASH_SIZE_MASK (0x3 << 21) +#define NAND_256M (0x3 << 21) /* and more */ +#define NAND_128M (0x2 << 21) +#define NAND_64M (0x1 << 21) +#define NAND_32M (0x0 << 21) +#define ATMEL_16M (0x3 << 21) /* and more */ +#define ATMEL_8M (0x2 << 21) +#define ATMEL_4M_2M (0x1 << 21) +#define ATMEL_1M (0x0 << 21) /* and less */ +#define STM_32M (1 << 22) /* and more */ +#define STM_16M (0 << 22) /* and less */ + +#define FLASH_PARALLEL_HIGH_PIN_CNT (1 << 20) /* else low pin cnt */ + +/* Miscellaneous Control Register */ +#define GLOBAL_MISC_CTRL 0x30 +#define FLASH_PADS_MASK 0x07 +#define NAND_PADS_DISABLE BIT(2) +#define PFLASH_PADS_DISABLE BIT(1) +#define SFLASH_PADS_DISABLE BIT(0) + +static const struct of_device_id syscon_match[] = { + { .compatible = "cortina,gemini-syscon" }, + { }, +}; + +int of_flash_probe_gemini(struct platform_device *pdev, + struct device_node *np, + struct map_info *map) +{ + static struct regmap *rmap; + struct device *dev = &pdev->dev; + u32 val; + int ret; + + /* Multiplatform guard */ + if (!of_device_is_compatible(np, "cortina,gemini-flash")) + return 0; + + rmap = syscon_regmap_lookup_by_phandle(np, "syscon"); + if (IS_ERR(rmap)) { + dev_err(dev, "no syscon\n"); + return PTR_ERR(rmap); + } + + ret = regmap_read(rmap, GLOBAL_STATUS, &val); + if (ret) { + dev_err(dev, "failed to read global status register\n"); + return -ENODEV; + } + dev_dbg(dev, "global status reg: %08x\n", val); + + /* + * It would be contradictory if a physmap flash was NOT parallel. + */ + if ((val & FLASH_TYPE_MASK) != FLASH_TYPE_PARALLEL) { + dev_err(dev, "flash is not parallel\n"); + return -ENODEV; + } + + /* + * Complain if DT data and hardware definition is different. + */ + if (val & FLASH_WIDTH_16BIT) { + if (map->bankwidth != 2) + dev_warn(dev, "flash hardware say flash is 16 bit wide but DT says it is %d bits wide\n", + map->bankwidth * 8); + } else { + if (map->bankwidth != 1) + dev_warn(dev, "flash hardware say flash is 8 bit wide but DT says it is %d bits wide\n", + map->bankwidth * 8); + } + + /* Activate parallel (NOR flash) mode */ + ret = regmap_update_bits(rmap, GLOBAL_MISC_CTRL, + FLASH_PADS_MASK, + SFLASH_PADS_DISABLE | NAND_PADS_DISABLE); + if (ret) { + dev_err(dev, "unable to set up physmap pads\n"); + return -ENODEV; + } + + dev_info(&pdev->dev, "initialized Gemini-specific physmap control\n"); + + return 0; +} diff --git a/drivers/mtd/maps/physmap_of_gemini.h b/drivers/mtd/maps/physmap_of_gemini.h new file mode 100644 index 000000000000..c675025288dd --- /dev/null +++ b/drivers/mtd/maps/physmap_of_gemini.h @@ -0,0 +1,16 @@ +#include <linux/of.h> +#include <linux/mtd/map.h> + +#ifdef CONFIG_MTD_PHYSMAP_OF_GEMINI +int of_flash_probe_gemini(struct platform_device *pdev, + struct device_node *np, + struct map_info *map); +#else +static inline +int of_flash_probe_gemini(struct platform_device *pdev, + struct device_node *np, + struct map_info *map) +{ + return 0; +} +#endif diff --git a/drivers/mtd/maps/physmap_of_versatile.c b/drivers/mtd/maps/physmap_of_versatile.c index 0f39b2a015f4..8c6ccded9be8 100644 --- a/drivers/mtd/maps/physmap_of_versatile.c +++ b/drivers/mtd/maps/physmap_of_versatile.c @@ -252,4 +252,3 @@ int of_flash_probe_versatile(struct platform_device *pdev, return 0; } -EXPORT_SYMBOL_GPL(of_flash_probe_versatile); diff --git a/drivers/mtd/maps/pmcmsp-flash.c b/drivers/mtd/maps/pmcmsp-flash.c index f9fa3fad728e..2051f28ddac6 100644 --- a/drivers/mtd/maps/pmcmsp-flash.c +++ b/drivers/mtd/maps/pmcmsp-flash.c @@ -139,15 +139,13 @@ static int __init init_msp_flash(void) } msp_maps[i].bankwidth = 1; - msp_maps[i].name = kmalloc(7, GFP_KERNEL); + msp_maps[i].name = kstrndup(flash_name, 7, GFP_KERNEL); if (!msp_maps[i].name) { iounmap(msp_maps[i].virt); kfree(msp_parts[i]); goto cleanup_loop; } - msp_maps[i].name = strncpy(msp_maps[i].name, flash_name, 7); - for (j = 0; j < pcnt; j++) { part_name[5] = '0' + i; part_name[7] = '0' + j; diff --git a/drivers/mtd/mtd_blkdevs.c b/drivers/mtd/mtd_blkdevs.c index df8a5ef334c0..6b8d5cd7dbf6 100644 --- a/drivers/mtd/mtd_blkdevs.c +++ b/drivers/mtd/mtd_blkdevs.c @@ -84,9 +84,6 @@ static int do_blktrans_request(struct mtd_blktrans_ops *tr, nsect = blk_rq_cur_bytes(req) >> tr->blkshift; buf = bio_data(req->bio); - if (req->cmd_type != REQ_TYPE_FS) - return -EIO; - if (req_op(req) == REQ_OP_FLUSH) return tr->flush(dev); @@ -94,16 +91,16 @@ static int do_blktrans_request(struct mtd_blktrans_ops *tr, get_capacity(req->rq_disk)) return -EIO; - if (req_op(req) == REQ_OP_DISCARD) + switch (req_op(req)) { + case REQ_OP_DISCARD: return tr->discard(dev, block, nsect); - - if (rq_data_dir(req) == READ) { + case REQ_OP_READ: for (; nsect > 0; nsect--, block++, buf += tr->blksize) if (tr->readsect(dev, block, buf)) return -EIO; rq_flush_dcache_pages(req); return 0; - } else { + case REQ_OP_WRITE: if (!tr->writesect) return -EIO; @@ -112,6 +109,8 @@ static int do_blktrans_request(struct mtd_blktrans_ops *tr, if (tr->writesect(dev, block, buf)) return -EIO; return 0; + default: + return -EIO; } } diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c index ce5ccc573a9c..3568294d4854 100644 --- a/drivers/mtd/mtdchar.c +++ b/drivers/mtd/mtdchar.c @@ -451,7 +451,7 @@ static int mtdchar_readoob(struct file *file, struct mtd_info *mtd, * data. For our userspace tools it is important to dump areas * with ECC errors! * For kernel internal usage it also might return -EUCLEAN - * to signal the caller that a bitflip has occured and has + * to signal the caller that a bitflip has occurred and has * been corrected by the ECC algorithm. * * Note: currently the standard NAND function, nand_read_oob_std, diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c index 052772f7caef..66a9dedd1062 100644 --- a/drivers/mtd/mtdcore.c +++ b/drivers/mtd/mtdcore.c @@ -1128,7 +1128,7 @@ EXPORT_SYMBOL_GPL(mtd_write_oob); * @oobecc: OOB region struct filled with the appropriate ECC position * information * - * This functions return ECC section information in the OOB area. I you want + * This function returns ECC section information in the OOB area. If you want * to get all the ECC bytes information, then you should call * mtd_ooblayout_ecc(mtd, section++, oobecc) until it returns -ERANGE. * @@ -1160,7 +1160,7 @@ EXPORT_SYMBOL_GPL(mtd_ooblayout_ecc); * @oobfree: OOB region struct filled with the appropriate free position * information * - * This functions return free bytes position in the OOB area. I you want + * This function returns free bytes position in the OOB area. If you want * to get all the free bytes information, then you should call * mtd_ooblayout_free(mtd, section++, oobfree) until it returns -ERANGE. * @@ -1190,7 +1190,7 @@ EXPORT_SYMBOL_GPL(mtd_ooblayout_free); * @iter: iterator function. Should be either mtd_ooblayout_free or * mtd_ooblayout_ecc depending on the region type you're searching for * - * This functions returns the section id and oobregion information of a + * This function returns the section id and oobregion information of a * specific byte. For example, say you want to know where the 4th ECC byte is * stored, you'll use: * diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c index fccdd49bb964..ea5e5307f667 100644 --- a/drivers/mtd/mtdpart.c +++ b/drivers/mtd/mtdpart.c @@ -349,6 +349,14 @@ static const struct mtd_ooblayout_ops part_ooblayout_ops = { .free = part_ooblayout_free, }; +static int part_max_bad_blocks(struct mtd_info *mtd, loff_t ofs, size_t len) +{ + struct mtd_part *part = mtd_to_part(mtd); + + return part->master->_max_bad_blocks(part->master, + ofs + part->offset, len); +} + static inline void free_partition(struct mtd_part *p) { kfree(p->mtd.name); @@ -424,6 +432,7 @@ static struct mtd_part *allocate_partition(struct mtd_info *master, slave->mtd.dev.parent = IS_ENABLED(CONFIG_MTD_PARTITIONED_MASTER) ? &master->dev : master->dev.parent; + slave->mtd.dev.of_node = part->of_node; slave->mtd._read = part_read; slave->mtd._write = part_write; @@ -475,6 +484,8 @@ static struct mtd_part *allocate_partition(struct mtd_info *master, slave->mtd._block_isbad = part_block_isbad; if (master->_block_markbad) slave->mtd._block_markbad = part_block_markbad; + if (master->_max_bad_blocks) + slave->mtd._max_bad_blocks = part_max_bad_blocks; if (master->_get_device) slave->mtd._get_device = part_get_device; diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index 9ce5dcb4abd0..6d4d5672d1d8 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -426,6 +426,7 @@ config MTD_NAND_ORION config MTD_NAND_OXNAS tristate "NAND Flash support for Oxford Semiconductor SoC" + depends on ARCH_OXNAS || COMPILE_TEST depends on HAS_IOMEM help This enables the NAND flash controller on Oxford Semiconductor SoCs. @@ -535,6 +536,7 @@ config MTD_NAND_JZ4780 config MTD_NAND_FSMC tristate "Support for NAND on ST Micros FSMC" + depends on OF depends on PLAT_SPEAR || ARCH_NOMADIK || ARCH_U8500 || MACH_U300 help Enables support for NAND Flash chips on the ST Microelectronics diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c index 0a177b1bfe3e..d1570f512f0b 100644 --- a/drivers/mtd/nand/fsl_ifc_nand.c +++ b/drivers/mtd/nand/fsl_ifc_nand.c @@ -258,9 +258,15 @@ static void fsl_ifc_run_command(struct mtd_info *mtd) int bufnum = nctrl->page & priv->bufnum_mask; int sector = bufnum * chip->ecc.steps; int sector_end = sector + chip->ecc.steps - 1; + __be32 *eccstat_regs; + + if (ctrl->version >= FSL_IFC_VERSION_2_0_0) + eccstat_regs = ifc->ifc_nand.v2_nand_eccstat; + else + eccstat_regs = ifc->ifc_nand.v1_nand_eccstat; for (i = sector / 4; i <= sector_end / 4; i++) - eccstat[i] = ifc_in32(&ifc->ifc_nand.nand_eccstat[i]); + eccstat[i] = ifc_in32(&eccstat_regs[i]); for (i = sector; i <= sector_end; i++) { errors = check_read_ecc(mtd, ctrl, eccstat, i); diff --git a/drivers/mtd/nand/fsmc_nand.c b/drivers/mtd/nand/fsmc_nand.c index 4924b43977ef..bda1e4667138 100644 --- a/drivers/mtd/nand/fsmc_nand.c +++ b/drivers/mtd/nand/fsmc_nand.c @@ -35,10 +35,133 @@ #include <linux/mtd/partitions.h> #include <linux/io.h> #include <linux/slab.h> -#include <linux/mtd/fsmc.h> #include <linux/amba/bus.h> #include <mtd/mtd-abi.h> +#define FSMC_NAND_BW8 1 +#define FSMC_NAND_BW16 2 + +#define FSMC_MAX_NOR_BANKS 4 +#define FSMC_MAX_NAND_BANKS 4 + +#define FSMC_FLASH_WIDTH8 1 +#define FSMC_FLASH_WIDTH16 2 + +/* fsmc controller registers for NOR flash */ +#define CTRL 0x0 + /* ctrl register definitions */ + #define BANK_ENABLE (1 << 0) + #define MUXED (1 << 1) + #define NOR_DEV (2 << 2) + #define WIDTH_8 (0 << 4) + #define WIDTH_16 (1 << 4) + #define RSTPWRDWN (1 << 6) + #define WPROT (1 << 7) + #define WRT_ENABLE (1 << 12) + #define WAIT_ENB (1 << 13) + +#define CTRL_TIM 0x4 + /* ctrl_tim register definitions */ + +#define FSMC_NOR_BANK_SZ 0x8 +#define FSMC_NOR_REG_SIZE 0x40 + +#define FSMC_NOR_REG(base, bank, reg) (base + \ + FSMC_NOR_BANK_SZ * (bank) + \ + reg) + +/* fsmc controller registers for NAND flash */ +#define PC 0x00 + /* pc register definitions */ + #define FSMC_RESET (1 << 0) + #define FSMC_WAITON (1 << 1) + #define FSMC_ENABLE (1 << 2) + #define FSMC_DEVTYPE_NAND (1 << 3) + #define FSMC_DEVWID_8 (0 << 4) + #define FSMC_DEVWID_16 (1 << 4) + #define FSMC_ECCEN (1 << 6) + #define FSMC_ECCPLEN_512 (0 << 7) + #define FSMC_ECCPLEN_256 (1 << 7) + #define FSMC_TCLR_1 (1) + #define FSMC_TCLR_SHIFT (9) + #define FSMC_TCLR_MASK (0xF) + #define FSMC_TAR_1 (1) + #define FSMC_TAR_SHIFT (13) + #define FSMC_TAR_MASK (0xF) +#define STS 0x04 + /* sts register definitions */ + #define FSMC_CODE_RDY (1 << 15) +#define COMM 0x08 + /* comm register definitions */ + #define FSMC_TSET_0 0 + #define FSMC_TSET_SHIFT 0 + #define FSMC_TSET_MASK 0xFF + #define FSMC_TWAIT_6 6 + #define FSMC_TWAIT_SHIFT 8 + #define FSMC_TWAIT_MASK 0xFF + #define FSMC_THOLD_4 4 + #define FSMC_THOLD_SHIFT 16 + #define FSMC_THOLD_MASK 0xFF + #define FSMC_THIZ_1 1 + #define FSMC_THIZ_SHIFT 24 + #define FSMC_THIZ_MASK 0xFF +#define ATTRIB 0x0C +#define IOATA 0x10 +#define ECC1 0x14 +#define ECC2 0x18 +#define ECC3 0x1C +#define FSMC_NAND_BANK_SZ 0x20 + +#define FSMC_NAND_REG(base, bank, reg) (base + FSMC_NOR_REG_SIZE + \ + (FSMC_NAND_BANK_SZ * (bank)) + \ + reg) + +#define FSMC_BUSY_WAIT_TIMEOUT (1 * HZ) + +struct fsmc_nand_timings { + uint8_t tclr; + uint8_t tar; + uint8_t thiz; + uint8_t thold; + uint8_t twait; + uint8_t tset; +}; + +enum access_mode { + USE_DMA_ACCESS = 1, + USE_WORD_ACCESS, +}; + +/** + * fsmc_nand_platform_data - platform specific NAND controller config + * @nand_timings: timing setup for the physical NAND interface + * @partitions: partition table for the platform, use a default fallback + * if this is NULL + * @nr_partitions: the number of partitions in the previous entry + * @options: different options for the driver + * @width: bus width + * @bank: default bank + * @select_bank: callback to select a certain bank, this is + * platform-specific. If the controller only supports one bank + * this may be set to NULL + */ +struct fsmc_nand_platform_data { + struct fsmc_nand_timings *nand_timings; + struct mtd_partition *partitions; + unsigned int nr_partitions; + unsigned int options; + unsigned int width; + unsigned int bank; + + enum access_mode mode; + + void (*select_bank)(uint32_t bank, uint32_t busw); + + /* priv structures for dma accesses */ + void *read_dma_priv; + void *write_dma_priv; +}; + static int fsmc_ecc1_ooblayout_ecc(struct mtd_info *mtd, int section, struct mtd_oob_region *oobregion) { @@ -714,7 +837,6 @@ static bool filter(struct dma_chan *chan, void *slave) return true; } -#ifdef CONFIG_OF static int fsmc_nand_probe_config_dt(struct platform_device *pdev, struct device_node *np) { @@ -757,13 +879,6 @@ static int fsmc_nand_probe_config_dt(struct platform_device *pdev, } return 0; } -#else -static int fsmc_nand_probe_config_dt(struct platform_device *pdev, - struct device_node *np) -{ - return -ENOSYS; -} -#endif /* * fsmc_nand_probe - Probe function @@ -782,19 +897,15 @@ static int __init fsmc_nand_probe(struct platform_device *pdev) u32 pid; int i; - if (np) { - pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); - pdev->dev.platform_data = pdata; - ret = fsmc_nand_probe_config_dt(pdev, np); - if (ret) { - dev_err(&pdev->dev, "no platform data\n"); - return -ENODEV; - } - } + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return -ENOMEM; - if (!pdata) { - dev_err(&pdev->dev, "platform data is NULL\n"); - return -EINVAL; + pdev->dev.platform_data = pdata; + ret = fsmc_nand_probe_config_dt(pdev, np); + if (ret) { + dev_err(&pdev->dev, "no platform data\n"); + return -ENODEV; } /* Allocate memory for the device structure (and zero it) */ diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c index 6c062b8251d2..d52139635b67 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c @@ -20,6 +20,7 @@ */ #include <linux/clk.h> #include <linux/slab.h> +#include <linux/sched/task_stack.h> #include <linux/interrupt.h> #include <linux/module.h> #include <linux/mtd/partitions.h> diff --git a/drivers/mtd/nand/lpc32xx_slc.c b/drivers/mtd/nand/lpc32xx_slc.c index 53bafe23ab39..a0669a33f8fe 100644 --- a/drivers/mtd/nand/lpc32xx_slc.c +++ b/drivers/mtd/nand/lpc32xx_slc.c @@ -797,22 +797,17 @@ static int lpc32xx_nand_probe(struct platform_device *pdev) struct resource *rc; int res; - rc = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (rc == NULL) { - dev_err(&pdev->dev, "No memory resource found for device\n"); - return -EBUSY; - } - /* Allocate memory for the device structure (and zero it) */ host = devm_kzalloc(&pdev->dev, sizeof(*host), GFP_KERNEL); if (!host) return -ENOMEM; - host->io_base_dma = rc->start; + rc = platform_get_resource(pdev, IORESOURCE_MEM, 0); host->io_base = devm_ioremap_resource(&pdev->dev, rc); if (IS_ERR(host->io_base)) return PTR_ERR(host->io_base); + host->io_base_dma = rc->start; if (pdev->dev.of_node) host->ncfg = lpc32xx_parse_dt(&pdev->dev); if (!host->ncfg) { diff --git a/drivers/mtd/nand/mtk_nand.c b/drivers/mtd/nand/mtk_nand.c index 6c3eed3c2094..6c517c682939 100644 --- a/drivers/mtd/nand/mtk_nand.c +++ b/drivers/mtd/nand/mtk_nand.c @@ -1383,7 +1383,6 @@ static int mtk_nfc_probe(struct platform_device *pdev) nfc->regs = devm_ioremap_resource(dev, res); if (IS_ERR(nfc->regs)) { ret = PTR_ERR(nfc->regs); - dev_err(dev, "no nfi base\n"); goto release_ecc; } diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index ec1c28aaaf23..b0524f8accb6 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -36,6 +36,7 @@ #include <linux/sched.h> #include <linux/slab.h> #include <linux/mm.h> +#include <linux/nmi.h> #include <linux/types.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> @@ -3263,6 +3264,42 @@ static int nand_block_markbad(struct mtd_info *mtd, loff_t ofs) } /** + * nand_max_bad_blocks - [MTD Interface] Max number of bad blocks for an mtd + * @mtd: MTD device structure + * @ofs: offset relative to mtd start + * @len: length of mtd + */ +static int nand_max_bad_blocks(struct mtd_info *mtd, loff_t ofs, size_t len) +{ + struct nand_chip *chip = mtd_to_nand(mtd); + u32 part_start_block; + u32 part_end_block; + u32 part_start_die; + u32 part_end_die; + + /* + * max_bb_per_die and blocks_per_die used to determine + * the maximum bad block count. + */ + if (!chip->max_bb_per_die || !chip->blocks_per_die) + return -ENOTSUPP; + + /* Get the start and end of the partition in erase blocks. */ + part_start_block = mtd_div_by_eb(ofs, mtd); + part_end_block = mtd_div_by_eb(len, mtd) + part_start_block - 1; + + /* Get the start and end LUNs of the partition. */ + part_start_die = part_start_block / chip->blocks_per_die; + part_end_die = part_end_block / chip->blocks_per_die; + + /* + * Look up the bad blocks per unit and multiply by the number of units + * that the partition spans. + */ + return chip->max_bb_per_die * (part_end_die - part_start_die + 1); +} + +/** * nand_onfi_set_features- [REPLACEABLE] set features for ONFI nand * @mtd: MTD device structure * @chip: nand chip info structure @@ -3592,6 +3629,9 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip, chip->chipsize *= (uint64_t)mtd->erasesize * p->lun_count; chip->bits_per_cell = p->bits_per_cell; + chip->max_bb_per_die = le16_to_cpu(p->bb_per_lun); + chip->blocks_per_die = le32_to_cpu(p->blocks_per_lun); + if (onfi_feature(chip) & ONFI_FEATURE_16_BIT_BUS) *busw = NAND_BUSWIDTH_16; else @@ -4815,6 +4855,7 @@ int nand_scan_tail(struct mtd_info *mtd) mtd->_block_isreserved = nand_block_isreserved; mtd->_block_isbad = nand_block_isbad; mtd->_block_markbad = nand_block_markbad; + mtd->_max_bad_blocks = nand_max_bad_blocks; mtd->writebufsize = mtd->writesize; /* diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c index b3a332f37e14..4a2f75b0c200 100644 --- a/drivers/mtd/nand/nand_ids.c +++ b/drivers/mtd/nand/nand_ids.c @@ -185,6 +185,7 @@ struct nand_manufacturers nand_manuf_ids[] = { {NAND_MFR_SANDISK, "SanDisk"}, {NAND_MFR_INTEL, "Intel"}, {NAND_MFR_ATO, "ATO"}, + {NAND_MFR_WINBOND, "Winbond"}, {0x0, "Unknown"} }; diff --git a/drivers/mtd/nand/sunxi_nand.c b/drivers/mtd/nand/sunxi_nand.c index e40482a65de6..0eeeb8b889ea 100644 --- a/drivers/mtd/nand/sunxi_nand.c +++ b/drivers/mtd/nand/sunxi_nand.c @@ -321,6 +321,10 @@ static int sunxi_nfc_wait_events(struct sunxi_nfc *nfc, u32 events, ret = wait_for_completion_timeout(&nfc->complete, msecs_to_jiffies(timeout_ms)); + if (!ret) + ret = -ETIMEDOUT; + else + ret = 0; writel(0, nfc->regs + NFC_REG_INT); } else { @@ -518,6 +522,8 @@ static void sunxi_nfc_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) u32 tmp; while (len > offs) { + bool poll = false; + cnt = min(len - offs, NFC_SRAM_SIZE); ret = sunxi_nfc_wait_cmd_fifo_empty(nfc); @@ -528,7 +534,11 @@ static void sunxi_nfc_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) tmp = NFC_DATA_TRANS | NFC_DATA_SWAP_METHOD; writel(tmp, nfc->regs + NFC_REG_CMD); - ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, true, 0); + /* Arbitrary limit for polling mode */ + if (cnt < 64) + poll = true; + + ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, poll, 0); if (ret) break; @@ -551,6 +561,8 @@ static void sunxi_nfc_write_buf(struct mtd_info *mtd, const uint8_t *buf, u32 tmp; while (len > offs) { + bool poll = false; + cnt = min(len - offs, NFC_SRAM_SIZE); ret = sunxi_nfc_wait_cmd_fifo_empty(nfc); @@ -563,7 +575,11 @@ static void sunxi_nfc_write_buf(struct mtd_info *mtd, const uint8_t *buf, NFC_ACCESS_DIR; writel(tmp, nfc->regs + NFC_REG_CMD); - ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, true, 0); + /* Arbitrary limit for polling mode */ + if (cnt < 64) + poll = true; + + ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, poll, 0); if (ret) break; @@ -588,10 +604,6 @@ static void sunxi_nfc_cmd_ctrl(struct mtd_info *mtd, int dat, struct sunxi_nfc *nfc = to_sunxi_nfc(sunxi_nand->nand.controller); int ret; - ret = sunxi_nfc_wait_cmd_fifo_empty(nfc); - if (ret) - return; - if (dat == NAND_CMD_NONE && (ctrl & NAND_NCE) && !(ctrl & (NAND_CLE | NAND_ALE))) { u32 cmd = 0; @@ -621,6 +633,10 @@ static void sunxi_nfc_cmd_ctrl(struct mtd_info *mtd, int dat, writel(sunxi_nand->addr[1], nfc->regs + NFC_REG_ADDR_HIGH); + ret = sunxi_nfc_wait_cmd_fifo_empty(nfc); + if (ret) + return; + writel(cmd, nfc->regs + NFC_REG_CMD); sunxi_nand->addr[0] = 0; sunxi_nand->addr[1] = 0; @@ -957,7 +973,7 @@ static int sunxi_nfc_hw_ecc_read_chunk(struct mtd_info *mtd, writel(NFC_DATA_TRANS | NFC_DATA_SWAP_METHOD | NFC_ECC_OP, nfc->regs + NFC_REG_CMD); - ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, true, 0); + ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, false, 0); sunxi_nfc_randomizer_disable(mtd); if (ret) return ret; @@ -1069,7 +1085,7 @@ static int sunxi_nfc_hw_ecc_read_chunks_dma(struct mtd_info *mtd, uint8_t *buf, writel(NFC_PAGE_OP | NFC_DATA_SWAP_METHOD | NFC_DATA_TRANS, nfc->regs + NFC_REG_CMD); - ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, true, 0); + ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, false, 0); if (ret) dmaengine_terminate_all(nfc->dmac); @@ -1189,7 +1205,7 @@ static int sunxi_nfc_hw_ecc_write_chunk(struct mtd_info *mtd, NFC_ACCESS_DIR | NFC_ECC_OP, nfc->regs + NFC_REG_CMD); - ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, true, 0); + ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, false, 0); sunxi_nfc_randomizer_disable(mtd); if (ret) return ret; @@ -1428,7 +1444,7 @@ static int sunxi_nfc_hw_ecc_write_page_dma(struct mtd_info *mtd, NFC_DATA_TRANS | NFC_ACCESS_DIR, nfc->regs + NFC_REG_CMD); - ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, true, 0); + ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, false, 0); if (ret) dmaengine_terminate_all(nfc->dmac); diff --git a/drivers/mtd/nand/xway_nand.c b/drivers/mtd/nand/xway_nand.c index 895101a5e686..ddee4005248c 100644 --- a/drivers/mtd/nand/xway_nand.c +++ b/drivers/mtd/nand/xway_nand.c @@ -3,7 +3,7 @@ * under the terms of the GNU General Public License version 2 as published * by the Free Software Foundation. * - * Copyright © 2012 John Crispin <blogic@openwrt.org> + * Copyright © 2012 John Crispin <john@phrozen.org> * Copyright © 2016 Hauke Mehrtens <hauke@hauke-m.de> */ diff --git a/drivers/mtd/ofpart.c b/drivers/mtd/ofpart.c index ede407d6e106..464470122493 100644 --- a/drivers/mtd/ofpart.c +++ b/drivers/mtd/ofpart.c @@ -108,6 +108,7 @@ static int parse_ofpart_partitions(struct mtd_info *master, parts[i].offset = of_read_number(reg, a_cells); parts[i].size = of_read_number(reg + a_cells, s_cells); + parts[i].of_node = pp; partname = of_get_property(pp, "label", &len); if (!partname) diff --git a/drivers/mtd/spi-nor/Kconfig b/drivers/mtd/spi-nor/Kconfig index 4a682ee0f632..7252087ef407 100644 --- a/drivers/mtd/spi-nor/Kconfig +++ b/drivers/mtd/spi-nor/Kconfig @@ -29,6 +29,16 @@ config MTD_SPI_NOR_USE_4K_SECTORS Please note that some tools/drivers/filesystems may not work with 4096 B erase size (e.g. UBIFS requires 15 KiB as a minimum). +config SPI_ASPEED_SMC + tristate "Aspeed flash controllers in SPI mode" + depends on ARCH_ASPEED || COMPILE_TEST + depends on HAS_IOMEM && OF + help + This enables support for the Firmware Memory controller (FMC) + in the Aspeed AST2500/AST2400 SoCs when attached to SPI NOR chips, + and support for the SPI flash memory controller (SPI) for + the host firmware. The implementation only supports SPI NOR. + config SPI_ATMEL_QUADSPI tristate "Atmel Quad SPI Controller" depends on ARCH_AT91 || (ARM && COMPILE_TEST) @@ -40,7 +50,7 @@ config SPI_ATMEL_QUADSPI config SPI_CADENCE_QUADSPI tristate "Cadence Quad SPI controller" - depends on OF && ARM + depends on OF && (ARM || COMPILE_TEST) help Enable support for the Cadence Quad SPI Flash controller. @@ -76,4 +86,24 @@ config SPI_NXP_SPIFI Flash. Enable this option if you have a device with a SPIFI controller and want to access the Flash as a mtd device. +config SPI_INTEL_SPI + tristate + +config SPI_INTEL_SPI_PLATFORM + tristate "Intel PCH/PCU SPI flash platform driver" if EXPERT + depends on X86 + select SPI_INTEL_SPI + help + This enables platform support for the Intel PCH/PCU SPI + controller in master mode. This controller is present in modern + Intel hardware and is used to hold BIOS and other persistent + settings. Using this driver it is possible to upgrade BIOS + directly from Linux. + + Say N here unless you know what you are doing. Overwriting the + SPI flash may render the system unbootable. + + To compile this driver as a module, choose M here: the module + will be called intel-spi-platform. + endif # MTD_SPI_NOR diff --git a/drivers/mtd/spi-nor/Makefile b/drivers/mtd/spi-nor/Makefile index 121695e83542..72238a793198 100644 --- a/drivers/mtd/spi-nor/Makefile +++ b/drivers/mtd/spi-nor/Makefile @@ -1,7 +1,10 @@ obj-$(CONFIG_MTD_SPI_NOR) += spi-nor.o +obj-$(CONFIG_SPI_ASPEED_SMC) += aspeed-smc.o obj-$(CONFIG_SPI_ATMEL_QUADSPI) += atmel-quadspi.o obj-$(CONFIG_SPI_CADENCE_QUADSPI) += cadence-quadspi.o obj-$(CONFIG_SPI_FSL_QUADSPI) += fsl-quadspi.o obj-$(CONFIG_SPI_HISI_SFC) += hisi-sfc.o obj-$(CONFIG_MTD_MT81xx_NOR) += mtk-quadspi.o obj-$(CONFIG_SPI_NXP_SPIFI) += nxp-spifi.o +obj-$(CONFIG_SPI_INTEL_SPI) += intel-spi.o +obj-$(CONFIG_SPI_INTEL_SPI_PLATFORM) += intel-spi-platform.o diff --git a/drivers/mtd/spi-nor/aspeed-smc.c b/drivers/mtd/spi-nor/aspeed-smc.c new file mode 100644 index 000000000000..56051d30f000 --- /dev/null +++ b/drivers/mtd/spi-nor/aspeed-smc.c @@ -0,0 +1,754 @@ +/* + * ASPEED Static Memory Controller driver + * + * Copyright (c) 2015-2016, IBM Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/bug.h> +#include <linux/device.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/spi-nor.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/sysfs.h> + +#define DEVICE_NAME "aspeed-smc" + +/* + * The driver only support SPI flash + */ +enum aspeed_smc_flash_type { + smc_type_nor = 0, + smc_type_nand = 1, + smc_type_spi = 2, +}; + +struct aspeed_smc_chip; + +struct aspeed_smc_info { + u32 maxsize; /* maximum size of chip window */ + u8 nce; /* number of chip enables */ + bool hastype; /* flash type field exists in config reg */ + u8 we0; /* shift for write enable bit for CE0 */ + u8 ctl0; /* offset in regs of ctl for CE0 */ + + void (*set_4b)(struct aspeed_smc_chip *chip); +}; + +static void aspeed_smc_chip_set_4b_spi_2400(struct aspeed_smc_chip *chip); +static void aspeed_smc_chip_set_4b(struct aspeed_smc_chip *chip); + +static const struct aspeed_smc_info fmc_2400_info = { + .maxsize = 64 * 1024 * 1024, + .nce = 5, + .hastype = true, + .we0 = 16, + .ctl0 = 0x10, + .set_4b = aspeed_smc_chip_set_4b, +}; + +static const struct aspeed_smc_info spi_2400_info = { + .maxsize = 64 * 1024 * 1024, + .nce = 1, + .hastype = false, + .we0 = 0, + .ctl0 = 0x04, + .set_4b = aspeed_smc_chip_set_4b_spi_2400, +}; + +static const struct aspeed_smc_info fmc_2500_info = { + .maxsize = 256 * 1024 * 1024, + .nce = 3, + .hastype = true, + .we0 = 16, + .ctl0 = 0x10, + .set_4b = aspeed_smc_chip_set_4b, +}; + +static const struct aspeed_smc_info spi_2500_info = { + .maxsize = 128 * 1024 * 1024, + .nce = 2, + .hastype = false, + .we0 = 16, + .ctl0 = 0x10, + .set_4b = aspeed_smc_chip_set_4b, +}; + +enum aspeed_smc_ctl_reg_value { + smc_base, /* base value without mode for other commands */ + smc_read, /* command reg for (maybe fast) reads */ + smc_write, /* command reg for writes */ + smc_max, +}; + +struct aspeed_smc_controller; + +struct aspeed_smc_chip { + int cs; + struct aspeed_smc_controller *controller; + void __iomem *ctl; /* control register */ + void __iomem *ahb_base; /* base of chip window */ + u32 ctl_val[smc_max]; /* control settings */ + enum aspeed_smc_flash_type type; /* what type of flash */ + struct spi_nor nor; +}; + +struct aspeed_smc_controller { + struct device *dev; + + struct mutex mutex; /* controller access mutex */ + const struct aspeed_smc_info *info; /* type info of controller */ + void __iomem *regs; /* controller registers */ + void __iomem *ahb_base; /* per-chip windows resource */ + + struct aspeed_smc_chip *chips[0]; /* pointers to attached chips */ +}; + +/* + * SPI Flash Configuration Register (AST2500 SPI) + * or + * Type setting Register (AST2500 FMC). + * CE0 and CE1 can only be of type SPI. CE2 can be of type NOR but the + * driver does not support it. + */ +#define CONFIG_REG 0x0 +#define CONFIG_DISABLE_LEGACY BIT(31) /* 1 */ + +#define CONFIG_CE2_WRITE BIT(18) +#define CONFIG_CE1_WRITE BIT(17) +#define CONFIG_CE0_WRITE BIT(16) + +#define CONFIG_CE2_TYPE BIT(4) /* AST2500 FMC only */ +#define CONFIG_CE1_TYPE BIT(2) /* AST2500 FMC only */ +#define CONFIG_CE0_TYPE BIT(0) /* AST2500 FMC only */ + +/* + * CE Control Register + */ +#define CE_CONTROL_REG 0x4 + +/* + * CEx Control Register + */ +#define CONTROL_AAF_MODE BIT(31) +#define CONTROL_IO_MODE_MASK GENMASK(30, 28) +#define CONTROL_IO_DUAL_DATA BIT(29) +#define CONTROL_IO_DUAL_ADDR_DATA (BIT(29) | BIT(28)) +#define CONTROL_IO_QUAD_DATA BIT(30) +#define CONTROL_IO_QUAD_ADDR_DATA (BIT(30) | BIT(28)) +#define CONTROL_CE_INACTIVE_SHIFT 24 +#define CONTROL_CE_INACTIVE_MASK GENMASK(27, \ + CONTROL_CE_INACTIVE_SHIFT) +/* 0 = 16T ... 15 = 1T T=HCLK */ +#define CONTROL_COMMAND_SHIFT 16 +#define CONTROL_DUMMY_COMMAND_OUT BIT(15) +#define CONTROL_IO_DUMMY_HI BIT(14) +#define CONTROL_IO_DUMMY_HI_SHIFT 14 +#define CONTROL_CLK_DIV4 BIT(13) /* others */ +#define CONTROL_IO_ADDRESS_4B BIT(13) /* AST2400 SPI */ +#define CONTROL_RW_MERGE BIT(12) +#define CONTROL_IO_DUMMY_LO_SHIFT 6 +#define CONTROL_IO_DUMMY_LO GENMASK(7, \ + CONTROL_IO_DUMMY_LO_SHIFT) +#define CONTROL_IO_DUMMY_MASK (CONTROL_IO_DUMMY_HI | \ + CONTROL_IO_DUMMY_LO) +#define CONTROL_IO_DUMMY_SET(dummy) \ + (((((dummy) >> 2) & 0x1) << CONTROL_IO_DUMMY_HI_SHIFT) | \ + (((dummy) & 0x3) << CONTROL_IO_DUMMY_LO_SHIFT)) + +#define CONTROL_CLOCK_FREQ_SEL_SHIFT 8 +#define CONTROL_CLOCK_FREQ_SEL_MASK GENMASK(11, \ + CONTROL_CLOCK_FREQ_SEL_SHIFT) +#define CONTROL_LSB_FIRST BIT(5) +#define CONTROL_CLOCK_MODE_3 BIT(4) +#define CONTROL_IN_DUAL_DATA BIT(3) +#define CONTROL_CE_STOP_ACTIVE_CONTROL BIT(2) +#define CONTROL_COMMAND_MODE_MASK GENMASK(1, 0) +#define CONTROL_COMMAND_MODE_NORMAL 0 +#define CONTROL_COMMAND_MODE_FREAD 1 +#define CONTROL_COMMAND_MODE_WRITE 2 +#define CONTROL_COMMAND_MODE_USER 3 + +#define CONTROL_KEEP_MASK \ + (CONTROL_AAF_MODE | CONTROL_CE_INACTIVE_MASK | CONTROL_CLK_DIV4 | \ + CONTROL_IO_DUMMY_MASK | CONTROL_CLOCK_FREQ_SEL_MASK | \ + CONTROL_LSB_FIRST | CONTROL_CLOCK_MODE_3) + +/* + * The Segment Register uses a 8MB unit to encode the start address + * and the end address of the mapping window of a flash SPI slave : + * + * | byte 1 | byte 2 | byte 3 | byte 4 | + * +--------+--------+--------+--------+ + * | end | start | 0 | 0 | + */ +#define SEGMENT_ADDR_REG0 0x30 +#define SEGMENT_ADDR_START(_r) ((((_r) >> 16) & 0xFF) << 23) +#define SEGMENT_ADDR_END(_r) ((((_r) >> 24) & 0xFF) << 23) + +/* + * In user mode all data bytes read or written to the chip decode address + * range are transferred to or from the SPI bus. The range is treated as a + * fifo of arbitratry 1, 2, or 4 byte width but each write has to be aligned + * to its size. The address within the multiple 8kB range is ignored when + * sending bytes to the SPI bus. + * + * On the arm architecture, as of Linux version 4.3, memcpy_fromio and + * memcpy_toio on little endian targets use the optimized memcpy routines + * that were designed for well behavied memory storage. These routines + * have a stutter if the source and destination are not both word aligned, + * once with a duplicate access to the source after aligning to the + * destination to a word boundary, and again with a duplicate access to + * the source when the final byte count is not word aligned. + * + * When writing or reading the fifo this stutter discards data or sends + * too much data to the fifo and can not be used by this driver. + * + * While the low level io string routines that implement the insl family do + * the desired accesses and memory increments, the cross architecture io + * macros make them essentially impossible to use on a memory mapped address + * instead of a a token from the call to iomap of an io port. + * + * These fifo routines use readl and friends to a constant io port and update + * the memory buffer pointer and count via explicit code. The final updates + * to len are optimistically suppressed. + */ +static int aspeed_smc_read_from_ahb(void *buf, void __iomem *src, size_t len) +{ + size_t offset = 0; + + if (IS_ALIGNED((uintptr_t)src, sizeof(uintptr_t)) && + IS_ALIGNED((uintptr_t)buf, sizeof(uintptr_t))) { + ioread32_rep(src, buf, len >> 2); + offset = len & ~0x3; + len -= offset; + } + ioread8_rep(src, (u8 *)buf + offset, len); + return 0; +} + +static int aspeed_smc_write_to_ahb(void __iomem *dst, const void *buf, + size_t len) +{ + size_t offset = 0; + + if (IS_ALIGNED((uintptr_t)dst, sizeof(uintptr_t)) && + IS_ALIGNED((uintptr_t)buf, sizeof(uintptr_t))) { + iowrite32_rep(dst, buf, len >> 2); + offset = len & ~0x3; + len -= offset; + } + iowrite8_rep(dst, (const u8 *)buf + offset, len); + return 0; +} + +static inline u32 aspeed_smc_chip_write_bit(struct aspeed_smc_chip *chip) +{ + return BIT(chip->controller->info->we0 + chip->cs); +} + +static void aspeed_smc_chip_check_config(struct aspeed_smc_chip *chip) +{ + struct aspeed_smc_controller *controller = chip->controller; + u32 reg; + + reg = readl(controller->regs + CONFIG_REG); + + if (reg & aspeed_smc_chip_write_bit(chip)) + return; + + dev_dbg(controller->dev, "config write is not set ! @%p: 0x%08x\n", + controller->regs + CONFIG_REG, reg); + reg |= aspeed_smc_chip_write_bit(chip); + writel(reg, controller->regs + CONFIG_REG); +} + +static void aspeed_smc_start_user(struct spi_nor *nor) +{ + struct aspeed_smc_chip *chip = nor->priv; + u32 ctl = chip->ctl_val[smc_base]; + + /* + * When the chip is controlled in user mode, we need write + * access to send the opcodes to it. So check the config. + */ + aspeed_smc_chip_check_config(chip); + + ctl |= CONTROL_COMMAND_MODE_USER | + CONTROL_CE_STOP_ACTIVE_CONTROL; + writel(ctl, chip->ctl); + + ctl &= ~CONTROL_CE_STOP_ACTIVE_CONTROL; + writel(ctl, chip->ctl); +} + +static void aspeed_smc_stop_user(struct spi_nor *nor) +{ + struct aspeed_smc_chip *chip = nor->priv; + + u32 ctl = chip->ctl_val[smc_read]; + u32 ctl2 = ctl | CONTROL_COMMAND_MODE_USER | + CONTROL_CE_STOP_ACTIVE_CONTROL; + + writel(ctl2, chip->ctl); /* stop user CE control */ + writel(ctl, chip->ctl); /* default to fread or read mode */ +} + +static int aspeed_smc_prep(struct spi_nor *nor, enum spi_nor_ops ops) +{ + struct aspeed_smc_chip *chip = nor->priv; + + mutex_lock(&chip->controller->mutex); + return 0; +} + +static void aspeed_smc_unprep(struct spi_nor *nor, enum spi_nor_ops ops) +{ + struct aspeed_smc_chip *chip = nor->priv; + + mutex_unlock(&chip->controller->mutex); +} + +static int aspeed_smc_read_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len) +{ + struct aspeed_smc_chip *chip = nor->priv; + + aspeed_smc_start_user(nor); + aspeed_smc_write_to_ahb(chip->ahb_base, &opcode, 1); + aspeed_smc_read_from_ahb(buf, chip->ahb_base, len); + aspeed_smc_stop_user(nor); + return 0; +} + +static int aspeed_smc_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, + int len) +{ + struct aspeed_smc_chip *chip = nor->priv; + + aspeed_smc_start_user(nor); + aspeed_smc_write_to_ahb(chip->ahb_base, &opcode, 1); + aspeed_smc_write_to_ahb(chip->ahb_base, buf, len); + aspeed_smc_stop_user(nor); + return 0; +} + +static void aspeed_smc_send_cmd_addr(struct spi_nor *nor, u8 cmd, u32 addr) +{ + struct aspeed_smc_chip *chip = nor->priv; + __be32 temp; + u32 cmdaddr; + + switch (nor->addr_width) { + default: + WARN_ONCE(1, "Unexpected address width %u, defaulting to 3\n", + nor->addr_width); + /* FALLTHROUGH */ + case 3: + cmdaddr = addr & 0xFFFFFF; + cmdaddr |= cmd << 24; + + temp = cpu_to_be32(cmdaddr); + aspeed_smc_write_to_ahb(chip->ahb_base, &temp, 4); + break; + case 4: + temp = cpu_to_be32(addr); + aspeed_smc_write_to_ahb(chip->ahb_base, &cmd, 1); + aspeed_smc_write_to_ahb(chip->ahb_base, &temp, 4); + break; + } +} + +static ssize_t aspeed_smc_read_user(struct spi_nor *nor, loff_t from, + size_t len, u_char *read_buf) +{ + struct aspeed_smc_chip *chip = nor->priv; + int i; + u8 dummy = 0xFF; + + aspeed_smc_start_user(nor); + aspeed_smc_send_cmd_addr(nor, nor->read_opcode, from); + for (i = 0; i < chip->nor.read_dummy / 8; i++) + aspeed_smc_write_to_ahb(chip->ahb_base, &dummy, sizeof(dummy)); + + aspeed_smc_read_from_ahb(read_buf, chip->ahb_base, len); + aspeed_smc_stop_user(nor); + return len; +} + +static ssize_t aspeed_smc_write_user(struct spi_nor *nor, loff_t to, + size_t len, const u_char *write_buf) +{ + struct aspeed_smc_chip *chip = nor->priv; + + aspeed_smc_start_user(nor); + aspeed_smc_send_cmd_addr(nor, nor->program_opcode, to); + aspeed_smc_write_to_ahb(chip->ahb_base, write_buf, len); + aspeed_smc_stop_user(nor); + return len; +} + +static int aspeed_smc_unregister(struct aspeed_smc_controller *controller) +{ + struct aspeed_smc_chip *chip; + int n; + + for (n = 0; n < controller->info->nce; n++) { + chip = controller->chips[n]; + if (chip) + mtd_device_unregister(&chip->nor.mtd); + } + + return 0; +} + +static int aspeed_smc_remove(struct platform_device *dev) +{ + return aspeed_smc_unregister(platform_get_drvdata(dev)); +} + +static const struct of_device_id aspeed_smc_matches[] = { + { .compatible = "aspeed,ast2400-fmc", .data = &fmc_2400_info }, + { .compatible = "aspeed,ast2400-spi", .data = &spi_2400_info }, + { .compatible = "aspeed,ast2500-fmc", .data = &fmc_2500_info }, + { .compatible = "aspeed,ast2500-spi", .data = &spi_2500_info }, + { } +}; +MODULE_DEVICE_TABLE(of, aspeed_smc_matches); + +/* + * Each chip has a mapping window defined by a segment address + * register defining a start and an end address on the AHB bus. These + * addresses can be configured to fit the chip size and offer a + * contiguous memory region across chips. For the moment, we only + * check that each chip segment is valid. + */ +static void __iomem *aspeed_smc_chip_base(struct aspeed_smc_chip *chip, + struct resource *res) +{ + struct aspeed_smc_controller *controller = chip->controller; + u32 offset = 0; + u32 reg; + + if (controller->info->nce > 1) { + reg = readl(controller->regs + SEGMENT_ADDR_REG0 + + chip->cs * 4); + + if (SEGMENT_ADDR_START(reg) >= SEGMENT_ADDR_END(reg)) + return NULL; + + offset = SEGMENT_ADDR_START(reg) - res->start; + } + + return controller->ahb_base + offset; +} + +static void aspeed_smc_chip_enable_write(struct aspeed_smc_chip *chip) +{ + struct aspeed_smc_controller *controller = chip->controller; + u32 reg; + + reg = readl(controller->regs + CONFIG_REG); + + reg |= aspeed_smc_chip_write_bit(chip); + writel(reg, controller->regs + CONFIG_REG); +} + +static void aspeed_smc_chip_set_type(struct aspeed_smc_chip *chip, int type) +{ + struct aspeed_smc_controller *controller = chip->controller; + u32 reg; + + chip->type = type; + + reg = readl(controller->regs + CONFIG_REG); + reg &= ~(3 << (chip->cs * 2)); + reg |= chip->type << (chip->cs * 2); + writel(reg, controller->regs + CONFIG_REG); +} + +/* + * The AST2500 FMC flash controller should be strapped by hardware, or + * autodetected, but the AST2500 SPI flash needs to be set. + */ +static void aspeed_smc_chip_set_4b(struct aspeed_smc_chip *chip) +{ + struct aspeed_smc_controller *controller = chip->controller; + u32 reg; + + if (chip->controller->info == &spi_2500_info) { + reg = readl(controller->regs + CE_CONTROL_REG); + reg |= 1 << chip->cs; + writel(reg, controller->regs + CE_CONTROL_REG); + } +} + +/* + * The AST2400 SPI flash controller does not have a CE Control + * register. It uses the CE0 control register to set 4Byte mode at the + * controller level. + */ +static void aspeed_smc_chip_set_4b_spi_2400(struct aspeed_smc_chip *chip) +{ + chip->ctl_val[smc_base] |= CONTROL_IO_ADDRESS_4B; + chip->ctl_val[smc_read] |= CONTROL_IO_ADDRESS_4B; +} + +static int aspeed_smc_chip_setup_init(struct aspeed_smc_chip *chip, + struct resource *res) +{ + struct aspeed_smc_controller *controller = chip->controller; + const struct aspeed_smc_info *info = controller->info; + u32 reg, base_reg; + + /* + * Always turn on the write enable bit to allow opcodes to be + * sent in user mode. + */ + aspeed_smc_chip_enable_write(chip); + + /* The driver only supports SPI type flash */ + if (info->hastype) + aspeed_smc_chip_set_type(chip, smc_type_spi); + + /* + * Configure chip base address in memory + */ + chip->ahb_base = aspeed_smc_chip_base(chip, res); + if (!chip->ahb_base) { + dev_warn(chip->nor.dev, "CE segment window closed.\n"); + return -EINVAL; + } + + /* + * Get value of the inherited control register. U-Boot usually + * does some timing calibration on the FMC chip, so it's good + * to keep them. In the future, we should handle calibration + * from Linux. + */ + reg = readl(chip->ctl); + dev_dbg(controller->dev, "control register: %08x\n", reg); + + base_reg = reg & CONTROL_KEEP_MASK; + if (base_reg != reg) { + dev_dbg(controller->dev, + "control register changed to: %08x\n", + base_reg); + } + chip->ctl_val[smc_base] = base_reg; + + /* + * Retain the prior value of the control register as the + * default if it was normal access mode. Otherwise start with + * the sanitized base value set to read mode. + */ + if ((reg & CONTROL_COMMAND_MODE_MASK) == + CONTROL_COMMAND_MODE_NORMAL) + chip->ctl_val[smc_read] = reg; + else + chip->ctl_val[smc_read] = chip->ctl_val[smc_base] | + CONTROL_COMMAND_MODE_NORMAL; + + dev_dbg(controller->dev, "default control register: %08x\n", + chip->ctl_val[smc_read]); + return 0; +} + +static int aspeed_smc_chip_setup_finish(struct aspeed_smc_chip *chip) +{ + struct aspeed_smc_controller *controller = chip->controller; + const struct aspeed_smc_info *info = controller->info; + u32 cmd; + + if (chip->nor.addr_width == 4 && info->set_4b) + info->set_4b(chip); + + /* + * base mode has not been optimized yet. use it for writes. + */ + chip->ctl_val[smc_write] = chip->ctl_val[smc_base] | + chip->nor.program_opcode << CONTROL_COMMAND_SHIFT | + CONTROL_COMMAND_MODE_WRITE; + + dev_dbg(controller->dev, "write control register: %08x\n", + chip->ctl_val[smc_write]); + + /* + * TODO: Adjust clocks if fast read is supported and interpret + * SPI-NOR flags to adjust controller settings. + */ + switch (chip->nor.flash_read) { + case SPI_NOR_NORMAL: + cmd = CONTROL_COMMAND_MODE_NORMAL; + break; + case SPI_NOR_FAST: + cmd = CONTROL_COMMAND_MODE_FREAD; + break; + default: + dev_err(chip->nor.dev, "unsupported SPI read mode\n"); + return -EINVAL; + } + + chip->ctl_val[smc_read] |= cmd | + CONTROL_IO_DUMMY_SET(chip->nor.read_dummy / 8); + + dev_dbg(controller->dev, "base control register: %08x\n", + chip->ctl_val[smc_read]); + return 0; +} + +static int aspeed_smc_setup_flash(struct aspeed_smc_controller *controller, + struct device_node *np, struct resource *r) +{ + const struct aspeed_smc_info *info = controller->info; + struct device *dev = controller->dev; + struct device_node *child; + unsigned int cs; + int ret = -ENODEV; + + for_each_available_child_of_node(np, child) { + struct aspeed_smc_chip *chip; + struct spi_nor *nor; + struct mtd_info *mtd; + + /* This driver does not support NAND or NOR flash devices. */ + if (!of_device_is_compatible(child, "jedec,spi-nor")) + continue; + + ret = of_property_read_u32(child, "reg", &cs); + if (ret) { + dev_err(dev, "Couldn't not read chip select.\n"); + break; + } + + if (cs >= info->nce) { + dev_err(dev, "Chip select %d out of range.\n", + cs); + ret = -ERANGE; + break; + } + + if (controller->chips[cs]) { + dev_err(dev, "Chip select %d already in use by %s\n", + cs, dev_name(controller->chips[cs]->nor.dev)); + ret = -EBUSY; + break; + } + + chip = devm_kzalloc(controller->dev, sizeof(*chip), GFP_KERNEL); + if (!chip) { + ret = -ENOMEM; + break; + } + + chip->controller = controller; + chip->ctl = controller->regs + info->ctl0 + cs * 4; + chip->cs = cs; + + nor = &chip->nor; + mtd = &nor->mtd; + + nor->dev = dev; + nor->priv = chip; + spi_nor_set_flash_node(nor, child); + nor->read = aspeed_smc_read_user; + nor->write = aspeed_smc_write_user; + nor->read_reg = aspeed_smc_read_reg; + nor->write_reg = aspeed_smc_write_reg; + nor->prepare = aspeed_smc_prep; + nor->unprepare = aspeed_smc_unprep; + + ret = aspeed_smc_chip_setup_init(chip, r); + if (ret) + break; + + /* + * TODO: Add support for SPI_NOR_QUAD and SPI_NOR_DUAL + * attach when board support is present as determined + * by of property. + */ + ret = spi_nor_scan(nor, NULL, SPI_NOR_NORMAL); + if (ret) + break; + + ret = aspeed_smc_chip_setup_finish(chip); + if (ret) + break; + + ret = mtd_device_register(mtd, NULL, 0); + if (ret) + break; + + controller->chips[cs] = chip; + } + + if (ret) + aspeed_smc_unregister(controller); + + return ret; +} + +static int aspeed_smc_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct device *dev = &pdev->dev; + struct aspeed_smc_controller *controller; + const struct of_device_id *match; + const struct aspeed_smc_info *info; + struct resource *res; + int ret; + + match = of_match_device(aspeed_smc_matches, &pdev->dev); + if (!match || !match->data) + return -ENODEV; + info = match->data; + + controller = devm_kzalloc(&pdev->dev, sizeof(*controller) + + info->nce * sizeof(controller->chips[0]), GFP_KERNEL); + if (!controller) + return -ENOMEM; + controller->info = info; + controller->dev = dev; + + mutex_init(&controller->mutex); + platform_set_drvdata(pdev, controller); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + controller->regs = devm_ioremap_resource(dev, res); + if (IS_ERR(controller->regs)) + return PTR_ERR(controller->regs); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + controller->ahb_base = devm_ioremap_resource(dev, res); + if (IS_ERR(controller->ahb_base)) + return PTR_ERR(controller->ahb_base); + + ret = aspeed_smc_setup_flash(controller, np, res); + if (ret) + dev_err(dev, "Aspeed SMC probe failed %d\n", ret); + + return ret; +} + +static struct platform_driver aspeed_smc_driver = { + .probe = aspeed_smc_probe, + .remove = aspeed_smc_remove, + .driver = { + .name = DEVICE_NAME, + .of_match_table = aspeed_smc_matches, + } +}; + +module_platform_driver(aspeed_smc_driver); + +MODULE_DESCRIPTION("ASPEED Static Memory Controller Driver"); +MODULE_AUTHOR("Cedric Le Goater <clg@kaod.org>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mtd/spi-nor/cadence-quadspi.c b/drivers/mtd/spi-nor/cadence-quadspi.c index d489fbd07c12..9f8102de1b16 100644 --- a/drivers/mtd/spi-nor/cadence-quadspi.c +++ b/drivers/mtd/spi-nor/cadence-quadspi.c @@ -526,7 +526,8 @@ static int cqspi_indirect_read_execute(struct spi_nor *nor, bytes_to_read *= cqspi->fifo_width; bytes_to_read = bytes_to_read > remaining ? remaining : bytes_to_read; - readsl(ahb_base, rxbuf, DIV_ROUND_UP(bytes_to_read, 4)); + ioread32_rep(ahb_base, rxbuf, + DIV_ROUND_UP(bytes_to_read, 4)); rxbuf += bytes_to_read; remaining -= bytes_to_read; bytes_to_read = cqspi_get_rd_sram_level(cqspi); @@ -610,7 +611,8 @@ static int cqspi_indirect_write_execute(struct spi_nor *nor, while (remaining > 0) { write_bytes = remaining > page_size ? page_size : remaining; - writesl(cqspi->ahb_base, txbuf, DIV_ROUND_UP(write_bytes, 4)); + iowrite32_rep(cqspi->ahb_base, txbuf, + DIV_ROUND_UP(write_bytes, 4)); ret = wait_for_completion_timeout(&cqspi->transfer_complete, msecs_to_jiffies @@ -891,7 +893,7 @@ static ssize_t cqspi_write(struct spi_nor *nor, loff_t to, if (ret) return ret; - return (ret < 0) ? ret : len; + return len; } static ssize_t cqspi_read(struct spi_nor *nor, loff_t from, @@ -911,7 +913,7 @@ static ssize_t cqspi_read(struct spi_nor *nor, loff_t from, if (ret) return ret; - return (ret < 0) ? ret : len; + return len; } static int cqspi_erase(struct spi_nor *nor, loff_t offs) diff --git a/drivers/mtd/spi-nor/fsl-quadspi.c b/drivers/mtd/spi-nor/fsl-quadspi.c index b4d8953fb30a..1476135e0d50 100644 --- a/drivers/mtd/spi-nor/fsl-quadspi.c +++ b/drivers/mtd/spi-nor/fsl-quadspi.c @@ -193,7 +193,7 @@ #define QUADSPI_LUT_NUM 64 /* SEQID -- we can have 16 seqids at most. */ -#define SEQID_QUAD_READ 0 +#define SEQID_READ 0 #define SEQID_WREN 1 #define SEQID_WRDI 2 #define SEQID_RDSR 3 @@ -373,32 +373,26 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q) void __iomem *base = q->iobase; int rxfifo = q->devtype_data->rxfifo; u32 lut_base; - u8 cmd, addrlen, dummy; int i; + struct spi_nor *nor = &q->nor[0]; + u8 addrlen = (nor->addr_width == 3) ? ADDR24BIT : ADDR32BIT; + u8 read_op = nor->read_opcode; + u8 read_dm = nor->read_dummy; + fsl_qspi_unlock_lut(q); /* Clear all the LUT table */ for (i = 0; i < QUADSPI_LUT_NUM; i++) qspi_writel(q, 0, base + QUADSPI_LUT_BASE + i * 4); - /* Quad Read */ - lut_base = SEQID_QUAD_READ * 4; - - if (q->nor_size <= SZ_16M) { - cmd = SPINOR_OP_READ_1_1_4; - addrlen = ADDR24BIT; - dummy = 8; - } else { - /* use the 4-byte address */ - cmd = SPINOR_OP_READ_1_1_4; - addrlen = ADDR32BIT; - dummy = 8; - } + /* Read */ + lut_base = SEQID_READ * 4; - qspi_writel(q, LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen), + qspi_writel(q, LUT0(CMD, PAD1, read_op) | LUT1(ADDR, PAD1, addrlen), base + QUADSPI_LUT(lut_base)); - qspi_writel(q, LUT0(DUMMY, PAD1, dummy) | LUT1(FSL_READ, PAD4, rxfifo), + qspi_writel(q, LUT0(DUMMY, PAD1, read_dm) | + LUT1(FSL_READ, PAD4, rxfifo), base + QUADSPI_LUT(lut_base + 1)); /* Write enable */ @@ -409,16 +403,8 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q) /* Page Program */ lut_base = SEQID_PP * 4; - if (q->nor_size <= SZ_16M) { - cmd = SPINOR_OP_PP; - addrlen = ADDR24BIT; - } else { - /* use the 4-byte address */ - cmd = SPINOR_OP_PP; - addrlen = ADDR32BIT; - } - - qspi_writel(q, LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen), + qspi_writel(q, LUT0(CMD, PAD1, nor->program_opcode) | + LUT1(ADDR, PAD1, addrlen), base + QUADSPI_LUT(lut_base)); qspi_writel(q, LUT0(FSL_WRITE, PAD1, 0), base + QUADSPI_LUT(lut_base + 1)); @@ -432,10 +418,8 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q) /* Erase a sector */ lut_base = SEQID_SE * 4; - cmd = q->nor[0].erase_opcode; - addrlen = q->nor_size <= SZ_16M ? ADDR24BIT : ADDR32BIT; - - qspi_writel(q, LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen), + qspi_writel(q, LUT0(CMD, PAD1, nor->erase_opcode) | + LUT1(ADDR, PAD1, addrlen), base + QUADSPI_LUT(lut_base)); /* Erase the whole chip */ @@ -484,7 +468,7 @@ static int fsl_qspi_get_seqid(struct fsl_qspi *q, u8 cmd) { switch (cmd) { case SPINOR_OP_READ_1_1_4: - return SEQID_QUAD_READ; + return SEQID_READ; case SPINOR_OP_WREN: return SEQID_WREN; case SPINOR_OP_WRDI: diff --git a/drivers/mtd/spi-nor/intel-spi-platform.c b/drivers/mtd/spi-nor/intel-spi-platform.c new file mode 100644 index 000000000000..5c943df9398f --- /dev/null +++ b/drivers/mtd/spi-nor/intel-spi-platform.c @@ -0,0 +1,57 @@ +/* + * Intel PCH/PCU SPI flash platform driver. + * + * Copyright (C) 2016, Intel Corporation + * Author: Mika Westerberg <mika.westerberg@linux.intel.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/ioport.h> +#include <linux/module.h> +#include <linux/platform_device.h> + +#include "intel-spi.h" + +static int intel_spi_platform_probe(struct platform_device *pdev) +{ + struct intel_spi_boardinfo *info; + struct intel_spi *ispi; + struct resource *mem; + + info = dev_get_platdata(&pdev->dev); + if (!info) + return -EINVAL; + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + ispi = intel_spi_probe(&pdev->dev, mem, info); + if (IS_ERR(ispi)) + return PTR_ERR(ispi); + + platform_set_drvdata(pdev, ispi); + return 0; +} + +static int intel_spi_platform_remove(struct platform_device *pdev) +{ + struct intel_spi *ispi = platform_get_drvdata(pdev); + + return intel_spi_remove(ispi); +} + +static struct platform_driver intel_spi_platform_driver = { + .probe = intel_spi_platform_probe, + .remove = intel_spi_platform_remove, + .driver = { + .name = "intel-spi", + }, +}; + +module_platform_driver(intel_spi_platform_driver); + +MODULE_DESCRIPTION("Intel PCH/PCU SPI flash platform driver"); +MODULE_AUTHOR("Mika Westerberg <mika.westerberg@linux.intel.com>"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:intel-spi"); diff --git a/drivers/mtd/spi-nor/intel-spi.c b/drivers/mtd/spi-nor/intel-spi.c new file mode 100644 index 000000000000..a10f6027b386 --- /dev/null +++ b/drivers/mtd/spi-nor/intel-spi.c @@ -0,0 +1,777 @@ +/* + * Intel PCH/PCU SPI flash driver. + * + * Copyright (C) 2016, Intel Corporation + * Author: Mika Westerberg <mika.westerberg@linux.intel.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/err.h> +#include <linux/io.h> +#include <linux/iopoll.h> +#include <linux/module.h> +#include <linux/sched.h> +#include <linux/sizes.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/spi-nor.h> +#include <linux/platform_data/intel-spi.h> + +#include "intel-spi.h" + +/* Offsets are from @ispi->base */ +#define BFPREG 0x00 + +#define HSFSTS_CTL 0x04 +#define HSFSTS_CTL_FSMIE BIT(31) +#define HSFSTS_CTL_FDBC_SHIFT 24 +#define HSFSTS_CTL_FDBC_MASK (0x3f << HSFSTS_CTL_FDBC_SHIFT) + +#define HSFSTS_CTL_FCYCLE_SHIFT 17 +#define HSFSTS_CTL_FCYCLE_MASK (0x0f << HSFSTS_CTL_FCYCLE_SHIFT) +/* HW sequencer opcodes */ +#define HSFSTS_CTL_FCYCLE_READ (0x00 << HSFSTS_CTL_FCYCLE_SHIFT) +#define HSFSTS_CTL_FCYCLE_WRITE (0x02 << HSFSTS_CTL_FCYCLE_SHIFT) +#define HSFSTS_CTL_FCYCLE_ERASE (0x03 << HSFSTS_CTL_FCYCLE_SHIFT) +#define HSFSTS_CTL_FCYCLE_ERASE_64K (0x04 << HSFSTS_CTL_FCYCLE_SHIFT) +#define HSFSTS_CTL_FCYCLE_RDID (0x06 << HSFSTS_CTL_FCYCLE_SHIFT) +#define HSFSTS_CTL_FCYCLE_WRSR (0x07 << HSFSTS_CTL_FCYCLE_SHIFT) +#define HSFSTS_CTL_FCYCLE_RDSR (0x08 << HSFSTS_CTL_FCYCLE_SHIFT) + +#define HSFSTS_CTL_FGO BIT(16) +#define HSFSTS_CTL_FLOCKDN BIT(15) +#define HSFSTS_CTL_FDV BIT(14) +#define HSFSTS_CTL_SCIP BIT(5) +#define HSFSTS_CTL_AEL BIT(2) +#define HSFSTS_CTL_FCERR BIT(1) +#define HSFSTS_CTL_FDONE BIT(0) + +#define FADDR 0x08 +#define DLOCK 0x0c +#define FDATA(n) (0x10 + ((n) * 4)) + +#define FRACC 0x50 + +#define FREG(n) (0x54 + ((n) * 4)) +#define FREG_BASE_MASK 0x3fff +#define FREG_LIMIT_SHIFT 16 +#define FREG_LIMIT_MASK (0x03fff << FREG_LIMIT_SHIFT) + +/* Offset is from @ispi->pregs */ +#define PR(n) ((n) * 4) +#define PR_WPE BIT(31) +#define PR_LIMIT_SHIFT 16 +#define PR_LIMIT_MASK (0x3fff << PR_LIMIT_SHIFT) +#define PR_RPE BIT(15) +#define PR_BASE_MASK 0x3fff +/* Last PR is GPR0 */ +#define PR_NUM (5 + 1) + +/* Offsets are from @ispi->sregs */ +#define SSFSTS_CTL 0x00 +#define SSFSTS_CTL_FSMIE BIT(23) +#define SSFSTS_CTL_DS BIT(22) +#define SSFSTS_CTL_DBC_SHIFT 16 +#define SSFSTS_CTL_SPOP BIT(11) +#define SSFSTS_CTL_ACS BIT(10) +#define SSFSTS_CTL_SCGO BIT(9) +#define SSFSTS_CTL_COP_SHIFT 12 +#define SSFSTS_CTL_FRS BIT(7) +#define SSFSTS_CTL_DOFRS BIT(6) +#define SSFSTS_CTL_AEL BIT(4) +#define SSFSTS_CTL_FCERR BIT(3) +#define SSFSTS_CTL_FDONE BIT(2) +#define SSFSTS_CTL_SCIP BIT(0) + +#define PREOP_OPTYPE 0x04 +#define OPMENU0 0x08 +#define OPMENU1 0x0c + +/* CPU specifics */ +#define BYT_PR 0x74 +#define BYT_SSFSTS_CTL 0x90 +#define BYT_BCR 0xfc +#define BYT_BCR_WPD BIT(0) +#define BYT_FREG_NUM 5 + +#define LPT_PR 0x74 +#define LPT_SSFSTS_CTL 0x90 +#define LPT_FREG_NUM 5 + +#define BXT_PR 0x84 +#define BXT_SSFSTS_CTL 0xa0 +#define BXT_FREG_NUM 12 + +#define INTEL_SPI_TIMEOUT 5000 /* ms */ +#define INTEL_SPI_FIFO_SZ 64 + +/** + * struct intel_spi - Driver private data + * @dev: Device pointer + * @info: Pointer to board specific info + * @nor: SPI NOR layer structure + * @base: Beginning of MMIO space + * @pregs: Start of protection registers + * @sregs: Start of software sequencer registers + * @nregions: Maximum number of regions + * @writeable: Is the chip writeable + * @swseq: Use SW sequencer in register reads/writes + * @erase_64k: 64k erase supported + * @opcodes: Opcodes which are supported. This are programmed by BIOS + * before it locks down the controller. + * @preopcodes: Preopcodes which are supported. + */ +struct intel_spi { + struct device *dev; + const struct intel_spi_boardinfo *info; + struct spi_nor nor; + void __iomem *base; + void __iomem *pregs; + void __iomem *sregs; + size_t nregions; + bool writeable; + bool swseq; + bool erase_64k; + u8 opcodes[8]; + u8 preopcodes[2]; +}; + +static bool writeable; +module_param(writeable, bool, 0); +MODULE_PARM_DESC(writeable, "Enable write access to SPI flash chip (default=0)"); + +static void intel_spi_dump_regs(struct intel_spi *ispi) +{ + u32 value; + int i; + + dev_dbg(ispi->dev, "BFPREG=0x%08x\n", readl(ispi->base + BFPREG)); + + value = readl(ispi->base + HSFSTS_CTL); + dev_dbg(ispi->dev, "HSFSTS_CTL=0x%08x\n", value); + if (value & HSFSTS_CTL_FLOCKDN) + dev_dbg(ispi->dev, "-> Locked\n"); + + dev_dbg(ispi->dev, "FADDR=0x%08x\n", readl(ispi->base + FADDR)); + dev_dbg(ispi->dev, "DLOCK=0x%08x\n", readl(ispi->base + DLOCK)); + + for (i = 0; i < 16; i++) + dev_dbg(ispi->dev, "FDATA(%d)=0x%08x\n", + i, readl(ispi->base + FDATA(i))); + + dev_dbg(ispi->dev, "FRACC=0x%08x\n", readl(ispi->base + FRACC)); + + for (i = 0; i < ispi->nregions; i++) + dev_dbg(ispi->dev, "FREG(%d)=0x%08x\n", i, + readl(ispi->base + FREG(i))); + for (i = 0; i < PR_NUM; i++) + dev_dbg(ispi->dev, "PR(%d)=0x%08x\n", i, + readl(ispi->pregs + PR(i))); + + value = readl(ispi->sregs + SSFSTS_CTL); + dev_dbg(ispi->dev, "SSFSTS_CTL=0x%08x\n", value); + dev_dbg(ispi->dev, "PREOP_OPTYPE=0x%08x\n", + readl(ispi->sregs + PREOP_OPTYPE)); + dev_dbg(ispi->dev, "OPMENU0=0x%08x\n", readl(ispi->sregs + OPMENU0)); + dev_dbg(ispi->dev, "OPMENU1=0x%08x\n", readl(ispi->sregs + OPMENU1)); + + if (ispi->info->type == INTEL_SPI_BYT) + dev_dbg(ispi->dev, "BCR=0x%08x\n", readl(ispi->base + BYT_BCR)); + + dev_dbg(ispi->dev, "Protected regions:\n"); + for (i = 0; i < PR_NUM; i++) { + u32 base, limit; + + value = readl(ispi->pregs + PR(i)); + if (!(value & (PR_WPE | PR_RPE))) + continue; + + limit = (value & PR_LIMIT_MASK) >> PR_LIMIT_SHIFT; + base = value & PR_BASE_MASK; + + dev_dbg(ispi->dev, " %02d base: 0x%08x limit: 0x%08x [%c%c]\n", + i, base << 12, (limit << 12) | 0xfff, + value & PR_WPE ? 'W' : '.', + value & PR_RPE ? 'R' : '.'); + } + + dev_dbg(ispi->dev, "Flash regions:\n"); + for (i = 0; i < ispi->nregions; i++) { + u32 region, base, limit; + + region = readl(ispi->base + FREG(i)); + base = region & FREG_BASE_MASK; + limit = (region & FREG_LIMIT_MASK) >> FREG_LIMIT_SHIFT; + + if (base >= limit || (i > 0 && limit == 0)) + dev_dbg(ispi->dev, " %02d disabled\n", i); + else + dev_dbg(ispi->dev, " %02d base: 0x%08x limit: 0x%08x\n", + i, base << 12, (limit << 12) | 0xfff); + } + + dev_dbg(ispi->dev, "Using %cW sequencer for register access\n", + ispi->swseq ? 'S' : 'H'); +} + +/* Reads max INTEL_SPI_FIFO_SZ bytes from the device fifo */ +static int intel_spi_read_block(struct intel_spi *ispi, void *buf, size_t size) +{ + size_t bytes; + int i = 0; + + if (size > INTEL_SPI_FIFO_SZ) + return -EINVAL; + + while (size > 0) { + bytes = min_t(size_t, size, 4); + memcpy_fromio(buf, ispi->base + FDATA(i), bytes); + size -= bytes; + buf += bytes; + i++; + } + + return 0; +} + +/* Writes max INTEL_SPI_FIFO_SZ bytes to the device fifo */ +static int intel_spi_write_block(struct intel_spi *ispi, const void *buf, + size_t size) +{ + size_t bytes; + int i = 0; + + if (size > INTEL_SPI_FIFO_SZ) + return -EINVAL; + + while (size > 0) { + bytes = min_t(size_t, size, 4); + memcpy_toio(ispi->base + FDATA(i), buf, bytes); + size -= bytes; + buf += bytes; + i++; + } + + return 0; +} + +static int intel_spi_wait_hw_busy(struct intel_spi *ispi) +{ + u32 val; + + return readl_poll_timeout(ispi->base + HSFSTS_CTL, val, + !(val & HSFSTS_CTL_SCIP), 0, + INTEL_SPI_TIMEOUT * 1000); +} + +static int intel_spi_wait_sw_busy(struct intel_spi *ispi) +{ + u32 val; + + return readl_poll_timeout(ispi->sregs + SSFSTS_CTL, val, + !(val & SSFSTS_CTL_SCIP), 0, + INTEL_SPI_TIMEOUT * 1000); +} + +static int intel_spi_init(struct intel_spi *ispi) +{ + u32 opmenu0, opmenu1, val; + int i; + + switch (ispi->info->type) { + case INTEL_SPI_BYT: + ispi->sregs = ispi->base + BYT_SSFSTS_CTL; + ispi->pregs = ispi->base + BYT_PR; + ispi->nregions = BYT_FREG_NUM; + + if (writeable) { + /* Disable write protection */ + val = readl(ispi->base + BYT_BCR); + if (!(val & BYT_BCR_WPD)) { + val |= BYT_BCR_WPD; + writel(val, ispi->base + BYT_BCR); + val = readl(ispi->base + BYT_BCR); + } + + ispi->writeable = !!(val & BYT_BCR_WPD); + } + + break; + + case INTEL_SPI_LPT: + ispi->sregs = ispi->base + LPT_SSFSTS_CTL; + ispi->pregs = ispi->base + LPT_PR; + ispi->nregions = LPT_FREG_NUM; + break; + + case INTEL_SPI_BXT: + ispi->sregs = ispi->base + BXT_SSFSTS_CTL; + ispi->pregs = ispi->base + BXT_PR; + ispi->nregions = BXT_FREG_NUM; + ispi->erase_64k = true; + break; + + default: + return -EINVAL; + } + + /* Disable #SMI generation */ + val = readl(ispi->base + HSFSTS_CTL); + val &= ~HSFSTS_CTL_FSMIE; + writel(val, ispi->base + HSFSTS_CTL); + + /* + * BIOS programs allowed opcodes and then locks down the register. + * So read back what opcodes it decided to support. That's the set + * we are going to support as well. + */ + opmenu0 = readl(ispi->sregs + OPMENU0); + opmenu1 = readl(ispi->sregs + OPMENU1); + + /* + * Some controllers can only do basic operations using hardware + * sequencer. All other operations are supposed to be carried out + * using software sequencer. If we find that BIOS has programmed + * opcodes for the software sequencer we use that over the hardware + * sequencer. + */ + if (opmenu0 && opmenu1) { + for (i = 0; i < ARRAY_SIZE(ispi->opcodes) / 2; i++) { + ispi->opcodes[i] = opmenu0 >> i * 8; + ispi->opcodes[i + 4] = opmenu1 >> i * 8; + } + + val = readl(ispi->sregs + PREOP_OPTYPE); + ispi->preopcodes[0] = val; + ispi->preopcodes[1] = val >> 8; + + /* Disable #SMI generation from SW sequencer */ + val = readl(ispi->sregs + SSFSTS_CTL); + val &= ~SSFSTS_CTL_FSMIE; + writel(val, ispi->sregs + SSFSTS_CTL); + + ispi->swseq = true; + } + + intel_spi_dump_regs(ispi); + + return 0; +} + +static int intel_spi_opcode_index(struct intel_spi *ispi, u8 opcode) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(ispi->opcodes); i++) + if (ispi->opcodes[i] == opcode) + return i; + return -EINVAL; +} + +static int intel_spi_hw_cycle(struct intel_spi *ispi, u8 opcode, u8 *buf, + int len) +{ + u32 val, status; + int ret; + + val = readl(ispi->base + HSFSTS_CTL); + val &= ~(HSFSTS_CTL_FCYCLE_MASK | HSFSTS_CTL_FDBC_MASK); + + switch (opcode) { + case SPINOR_OP_RDID: + val |= HSFSTS_CTL_FCYCLE_RDID; + break; + case SPINOR_OP_WRSR: + val |= HSFSTS_CTL_FCYCLE_WRSR; + break; + case SPINOR_OP_RDSR: + val |= HSFSTS_CTL_FCYCLE_RDSR; + break; + default: + return -EINVAL; + } + + val |= (len - 1) << HSFSTS_CTL_FDBC_SHIFT; + val |= HSFSTS_CTL_FCERR | HSFSTS_CTL_FDONE; + val |= HSFSTS_CTL_FGO; + writel(val, ispi->base + HSFSTS_CTL); + + ret = intel_spi_wait_hw_busy(ispi); + if (ret) + return ret; + + status = readl(ispi->base + HSFSTS_CTL); + if (status & HSFSTS_CTL_FCERR) + return -EIO; + else if (status & HSFSTS_CTL_AEL) + return -EACCES; + + return 0; +} + +static int intel_spi_sw_cycle(struct intel_spi *ispi, u8 opcode, u8 *buf, + int len) +{ + u32 val, status; + int ret; + + ret = intel_spi_opcode_index(ispi, opcode); + if (ret < 0) + return ret; + + val = (len << SSFSTS_CTL_DBC_SHIFT) | SSFSTS_CTL_DS; + val |= ret << SSFSTS_CTL_COP_SHIFT; + val |= SSFSTS_CTL_FCERR | SSFSTS_CTL_FDONE; + val |= SSFSTS_CTL_SCGO; + writel(val, ispi->sregs + SSFSTS_CTL); + + ret = intel_spi_wait_sw_busy(ispi); + if (ret) + return ret; + + status = readl(ispi->base + SSFSTS_CTL); + if (status & SSFSTS_CTL_FCERR) + return -EIO; + else if (status & SSFSTS_CTL_AEL) + return -EACCES; + + return 0; +} + +static int intel_spi_read_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len) +{ + struct intel_spi *ispi = nor->priv; + int ret; + + /* Address of the first chip */ + writel(0, ispi->base + FADDR); + + if (ispi->swseq) + ret = intel_spi_sw_cycle(ispi, opcode, buf, len); + else + ret = intel_spi_hw_cycle(ispi, opcode, buf, len); + + if (ret) + return ret; + + return intel_spi_read_block(ispi, buf, len); +} + +static int intel_spi_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len) +{ + struct intel_spi *ispi = nor->priv; + int ret; + + /* + * This is handled with atomic operation and preop code in Intel + * controller so skip it here now. + */ + if (opcode == SPINOR_OP_WREN) + return 0; + + writel(0, ispi->base + FADDR); + + /* Write the value beforehand */ + ret = intel_spi_write_block(ispi, buf, len); + if (ret) + return ret; + + if (ispi->swseq) + return intel_spi_sw_cycle(ispi, opcode, buf, len); + return intel_spi_hw_cycle(ispi, opcode, buf, len); +} + +static ssize_t intel_spi_read(struct spi_nor *nor, loff_t from, size_t len, + u_char *read_buf) +{ + struct intel_spi *ispi = nor->priv; + size_t block_size, retlen = 0; + u32 val, status; + ssize_t ret; + + switch (nor->read_opcode) { + case SPINOR_OP_READ: + case SPINOR_OP_READ_FAST: + break; + default: + return -EINVAL; + } + + while (len > 0) { + block_size = min_t(size_t, len, INTEL_SPI_FIFO_SZ); + + writel(from, ispi->base + FADDR); + + val = readl(ispi->base + HSFSTS_CTL); + val &= ~(HSFSTS_CTL_FDBC_MASK | HSFSTS_CTL_FCYCLE_MASK); + val |= HSFSTS_CTL_AEL | HSFSTS_CTL_FCERR | HSFSTS_CTL_FDONE; + val |= (block_size - 1) << HSFSTS_CTL_FDBC_SHIFT; + val |= HSFSTS_CTL_FCYCLE_READ; + val |= HSFSTS_CTL_FGO; + writel(val, ispi->base + HSFSTS_CTL); + + ret = intel_spi_wait_hw_busy(ispi); + if (ret) + return ret; + + status = readl(ispi->base + HSFSTS_CTL); + if (status & HSFSTS_CTL_FCERR) + ret = -EIO; + else if (status & HSFSTS_CTL_AEL) + ret = -EACCES; + + if (ret < 0) { + dev_err(ispi->dev, "read error: %llx: %#x\n", from, + status); + return ret; + } + + ret = intel_spi_read_block(ispi, read_buf, block_size); + if (ret) + return ret; + + len -= block_size; + from += block_size; + retlen += block_size; + read_buf += block_size; + } + + return retlen; +} + +static ssize_t intel_spi_write(struct spi_nor *nor, loff_t to, size_t len, + const u_char *write_buf) +{ + struct intel_spi *ispi = nor->priv; + size_t block_size, retlen = 0; + u32 val, status; + ssize_t ret; + + while (len > 0) { + block_size = min_t(size_t, len, INTEL_SPI_FIFO_SZ); + + writel(to, ispi->base + FADDR); + + val = readl(ispi->base + HSFSTS_CTL); + val &= ~(HSFSTS_CTL_FDBC_MASK | HSFSTS_CTL_FCYCLE_MASK); + val |= HSFSTS_CTL_AEL | HSFSTS_CTL_FCERR | HSFSTS_CTL_FDONE; + val |= (block_size - 1) << HSFSTS_CTL_FDBC_SHIFT; + val |= HSFSTS_CTL_FCYCLE_WRITE; + + /* Write enable */ + if (ispi->preopcodes[1] == SPINOR_OP_WREN) + val |= SSFSTS_CTL_SPOP; + val |= SSFSTS_CTL_ACS; + writel(val, ispi->base + HSFSTS_CTL); + + ret = intel_spi_write_block(ispi, write_buf, block_size); + if (ret) { + dev_err(ispi->dev, "failed to write block\n"); + return ret; + } + + /* Start the write now */ + val = readl(ispi->base + HSFSTS_CTL); + writel(val | HSFSTS_CTL_FGO, ispi->base + HSFSTS_CTL); + + ret = intel_spi_wait_hw_busy(ispi); + if (ret) { + dev_err(ispi->dev, "timeout\n"); + return ret; + } + + status = readl(ispi->base + HSFSTS_CTL); + if (status & HSFSTS_CTL_FCERR) + ret = -EIO; + else if (status & HSFSTS_CTL_AEL) + ret = -EACCES; + + if (ret < 0) { + dev_err(ispi->dev, "write error: %llx: %#x\n", to, + status); + return ret; + } + + len -= block_size; + to += block_size; + retlen += block_size; + write_buf += block_size; + } + + return retlen; +} + +static int intel_spi_erase(struct spi_nor *nor, loff_t offs) +{ + size_t erase_size, len = nor->mtd.erasesize; + struct intel_spi *ispi = nor->priv; + u32 val, status, cmd; + int ret; + + /* If the hardware can do 64k erase use that when possible */ + if (len >= SZ_64K && ispi->erase_64k) { + cmd = HSFSTS_CTL_FCYCLE_ERASE_64K; + erase_size = SZ_64K; + } else { + cmd = HSFSTS_CTL_FCYCLE_ERASE; + erase_size = SZ_4K; + } + + while (len > 0) { + writel(offs, ispi->base + FADDR); + + val = readl(ispi->base + HSFSTS_CTL); + val &= ~(HSFSTS_CTL_FDBC_MASK | HSFSTS_CTL_FCYCLE_MASK); + val |= HSFSTS_CTL_AEL | HSFSTS_CTL_FCERR | HSFSTS_CTL_FDONE; + val |= cmd; + val |= HSFSTS_CTL_FGO; + writel(val, ispi->base + HSFSTS_CTL); + + ret = intel_spi_wait_hw_busy(ispi); + if (ret) + return ret; + + status = readl(ispi->base + HSFSTS_CTL); + if (status & HSFSTS_CTL_FCERR) + return -EIO; + else if (status & HSFSTS_CTL_AEL) + return -EACCES; + + offs += erase_size; + len -= erase_size; + } + + return 0; +} + +static bool intel_spi_is_protected(const struct intel_spi *ispi, + unsigned int base, unsigned int limit) +{ + int i; + + for (i = 0; i < PR_NUM; i++) { + u32 pr_base, pr_limit, pr_value; + + pr_value = readl(ispi->pregs + PR(i)); + if (!(pr_value & (PR_WPE | PR_RPE))) + continue; + + pr_limit = (pr_value & PR_LIMIT_MASK) >> PR_LIMIT_SHIFT; + pr_base = pr_value & PR_BASE_MASK; + + if (pr_base >= base && pr_limit <= limit) + return true; + } + + return false; +} + +/* + * There will be a single partition holding all enabled flash regions. We + * call this "BIOS". + */ +static void intel_spi_fill_partition(struct intel_spi *ispi, + struct mtd_partition *part) +{ + u64 end; + int i; + + memset(part, 0, sizeof(*part)); + + /* Start from the mandatory descriptor region */ + part->size = 4096; + part->name = "BIOS"; + + /* + * Now try to find where this partition ends based on the flash + * region registers. + */ + for (i = 1; i < ispi->nregions; i++) { + u32 region, base, limit; + + region = readl(ispi->base + FREG(i)); + base = region & FREG_BASE_MASK; + limit = (region & FREG_LIMIT_MASK) >> FREG_LIMIT_SHIFT; + + if (base >= limit || limit == 0) + continue; + + /* + * If any of the regions have protection bits set, make the + * whole partition read-only to be on the safe side. + */ + if (intel_spi_is_protected(ispi, base, limit)) + ispi->writeable = 0; + + end = (limit << 12) + 4096; + if (end > part->size) + part->size = end; + } +} + +struct intel_spi *intel_spi_probe(struct device *dev, + struct resource *mem, const struct intel_spi_boardinfo *info) +{ + struct mtd_partition part; + struct intel_spi *ispi; + int ret; + + if (!info || !mem) + return ERR_PTR(-EINVAL); + + ispi = devm_kzalloc(dev, sizeof(*ispi), GFP_KERNEL); + if (!ispi) + return ERR_PTR(-ENOMEM); + + ispi->base = devm_ioremap_resource(dev, mem); + if (IS_ERR(ispi->base)) + return ispi->base; + + ispi->dev = dev; + ispi->info = info; + ispi->writeable = info->writeable; + + ret = intel_spi_init(ispi); + if (ret) + return ERR_PTR(ret); + + ispi->nor.dev = ispi->dev; + ispi->nor.priv = ispi; + ispi->nor.read_reg = intel_spi_read_reg; + ispi->nor.write_reg = intel_spi_write_reg; + ispi->nor.read = intel_spi_read; + ispi->nor.write = intel_spi_write; + ispi->nor.erase = intel_spi_erase; + + ret = spi_nor_scan(&ispi->nor, NULL, SPI_NOR_NORMAL); + if (ret) { + dev_info(dev, "failed to locate the chip\n"); + return ERR_PTR(ret); + } + + intel_spi_fill_partition(ispi, &part); + + /* Prevent writes if not explicitly enabled */ + if (!ispi->writeable || !writeable) + ispi->nor.mtd.flags &= ~MTD_WRITEABLE; + + ret = mtd_device_parse_register(&ispi->nor.mtd, NULL, NULL, &part, 1); + if (ret) + return ERR_PTR(ret); + + return ispi; +} +EXPORT_SYMBOL_GPL(intel_spi_probe); + +int intel_spi_remove(struct intel_spi *ispi) +{ + return mtd_device_unregister(&ispi->nor.mtd); +} +EXPORT_SYMBOL_GPL(intel_spi_remove); + +MODULE_DESCRIPTION("Intel PCH/PCU SPI flash core driver"); +MODULE_AUTHOR("Mika Westerberg <mika.westerberg@linux.intel.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mtd/spi-nor/intel-spi.h b/drivers/mtd/spi-nor/intel-spi.h new file mode 100644 index 000000000000..5ab7dc250050 --- /dev/null +++ b/drivers/mtd/spi-nor/intel-spi.h @@ -0,0 +1,24 @@ +/* + * Intel PCH/PCU SPI flash driver. + * + * Copyright (C) 2016, Intel Corporation + * Author: Mika Westerberg <mika.westerberg@linux.intel.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef INTEL_SPI_H +#define INTEL_SPI_H + +#include <linux/platform_data/intel-spi.h> + +struct intel_spi; +struct resource; + +struct intel_spi *intel_spi_probe(struct device *dev, + struct resource *mem, const struct intel_spi_boardinfo *info); +int intel_spi_remove(struct intel_spi *ispi); + +#endif /* INTEL_SPI_H */ diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c index da7cd69d4857..1ae872bfc3ba 100644 --- a/drivers/mtd/spi-nor/spi-nor.c +++ b/drivers/mtd/spi-nor/spi-nor.c @@ -75,6 +75,16 @@ struct flash_info { * bit. Must be used with * SPI_NOR_HAS_LOCK. */ +#define SPI_S3AN BIT(10) /* + * Xilinx Spartan 3AN In-System Flash + * (MFR cannot be used for probing + * because it has the same value as + * ATMEL flashes) + */ +#define SPI_NOR_4B_OPCODES BIT(11) /* + * Use dedicated 4byte address op codes + * to support memory size above 128Mib. + */ }; #define JEDEC_MFR(info) ((info)->id[0]) @@ -122,7 +132,7 @@ static int read_fsr(struct spi_nor *nor) /* * Read configuration register, returning its value in the * location. Return the configuration register value. - * Returns negative if error occured. + * Returns negative if error occurred. */ static int read_cr(struct spi_nor *nor) { @@ -188,6 +198,78 @@ static inline struct spi_nor *mtd_to_spi_nor(struct mtd_info *mtd) return mtd->priv; } + +static u8 spi_nor_convert_opcode(u8 opcode, const u8 table[][2], size_t size) +{ + size_t i; + + for (i = 0; i < size; i++) + if (table[i][0] == opcode) + return table[i][1]; + + /* No conversion found, keep input op code. */ + return opcode; +} + +static inline u8 spi_nor_convert_3to4_read(u8 opcode) +{ + static const u8 spi_nor_3to4_read[][2] = { + { SPINOR_OP_READ, SPINOR_OP_READ_4B }, + { SPINOR_OP_READ_FAST, SPINOR_OP_READ_FAST_4B }, + { SPINOR_OP_READ_1_1_2, SPINOR_OP_READ_1_1_2_4B }, + { SPINOR_OP_READ_1_2_2, SPINOR_OP_READ_1_2_2_4B }, + { SPINOR_OP_READ_1_1_4, SPINOR_OP_READ_1_1_4_4B }, + { SPINOR_OP_READ_1_4_4, SPINOR_OP_READ_1_4_4_4B }, + }; + + return spi_nor_convert_opcode(opcode, spi_nor_3to4_read, + ARRAY_SIZE(spi_nor_3to4_read)); +} + +static inline u8 spi_nor_convert_3to4_program(u8 opcode) +{ + static const u8 spi_nor_3to4_program[][2] = { + { SPINOR_OP_PP, SPINOR_OP_PP_4B }, + { SPINOR_OP_PP_1_1_4, SPINOR_OP_PP_1_1_4_4B }, + { SPINOR_OP_PP_1_4_4, SPINOR_OP_PP_1_4_4_4B }, + }; + + return spi_nor_convert_opcode(opcode, spi_nor_3to4_program, + ARRAY_SIZE(spi_nor_3to4_program)); +} + +static inline u8 spi_nor_convert_3to4_erase(u8 opcode) +{ + static const u8 spi_nor_3to4_erase[][2] = { + { SPINOR_OP_BE_4K, SPINOR_OP_BE_4K_4B }, + { SPINOR_OP_BE_32K, SPINOR_OP_BE_32K_4B }, + { SPINOR_OP_SE, SPINOR_OP_SE_4B }, + }; + + return spi_nor_convert_opcode(opcode, spi_nor_3to4_erase, + ARRAY_SIZE(spi_nor_3to4_erase)); +} + +static void spi_nor_set_4byte_opcodes(struct spi_nor *nor, + const struct flash_info *info) +{ + /* Do some manufacturer fixups first */ + switch (JEDEC_MFR(info)) { + case SNOR_MFR_SPANSION: + /* No small sector erase for 4-byte command set */ + nor->erase_opcode = SPINOR_OP_SE; + nor->mtd.erasesize = info->sector_size; + break; + + default: + break; + } + + nor->read_opcode = spi_nor_convert_3to4_read(nor->read_opcode); + nor->program_opcode = spi_nor_convert_3to4_program(nor->program_opcode); + nor->erase_opcode = spi_nor_convert_3to4_erase(nor->erase_opcode); +} + /* Enable/disable 4-byte addressing mode. */ static inline int set_4byte(struct spi_nor *nor, const struct flash_info *info, int enable) @@ -217,6 +299,21 @@ static inline int set_4byte(struct spi_nor *nor, const struct flash_info *info, return nor->write_reg(nor, SPINOR_OP_BRWR, nor->cmd_buf, 1); } } + +static int s3an_sr_ready(struct spi_nor *nor) +{ + int ret; + u8 val; + + ret = nor->read_reg(nor, SPINOR_OP_XRDSR, &val, 1); + if (ret < 0) { + dev_err(nor->dev, "error %d reading XRDSR\n", (int) ret); + return ret; + } + + return !!(val & XSR_RDY); +} + static inline int spi_nor_sr_ready(struct spi_nor *nor) { int sr = read_sr(nor); @@ -238,7 +335,11 @@ static inline int spi_nor_fsr_ready(struct spi_nor *nor) static int spi_nor_ready(struct spi_nor *nor) { int sr, fsr; - sr = spi_nor_sr_ready(nor); + + if (nor->flags & SNOR_F_READY_XSR_RDY) + sr = s3an_sr_ready(nor); + else + sr = spi_nor_sr_ready(nor); if (sr < 0) return sr; fsr = nor->flags & SNOR_F_USE_FSR ? spi_nor_fsr_ready(nor) : 1; @@ -320,6 +421,27 @@ static void spi_nor_unlock_and_unprep(struct spi_nor *nor, enum spi_nor_ops ops) } /* + * This code converts an address to the Default Address Mode, that has non + * power of two page sizes. We must support this mode because it is the default + * mode supported by Xilinx tools, it can access the whole flash area and + * changing over to the Power-of-two mode is irreversible and corrupts the + * original data. + * Addr can safely be unsigned int, the biggest S3AN device is smaller than + * 4 MiB. + */ +static loff_t spi_nor_s3an_addr_convert(struct spi_nor *nor, unsigned int addr) +{ + unsigned int offset; + unsigned int page; + + offset = addr % nor->page_size; + page = addr / nor->page_size; + page <<= (nor->page_size > 512) ? 10 : 9; + + return page | offset; +} + +/* * Initiate the erasure of a single sector */ static int spi_nor_erase_sector(struct spi_nor *nor, u32 addr) @@ -327,6 +449,9 @@ static int spi_nor_erase_sector(struct spi_nor *nor, u32 addr) u8 buf[SPI_NOR_MAX_ADDR_WIDTH]; int i; + if (nor->flags & SNOR_F_S3AN_ADDR_DEFAULT) + addr = spi_nor_s3an_addr_convert(nor, addr); + if (nor->erase) return nor->erase(nor, addr); @@ -368,7 +493,7 @@ static int spi_nor_erase(struct mtd_info *mtd, struct erase_info *instr) return ret; /* whole-chip erase? */ - if (len == mtd->size) { + if (len == mtd->size && !(nor->flags & SNOR_F_NO_OP_CHIP_ERASE)) { unsigned long timeout; write_enable(nor); @@ -782,6 +907,19 @@ static int spi_nor_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len) .addr_width = (_addr_width), \ .flags = (_flags), +#define S3AN_INFO(_jedec_id, _n_sectors, _page_size) \ + .id = { \ + ((_jedec_id) >> 16) & 0xff, \ + ((_jedec_id) >> 8) & 0xff, \ + (_jedec_id) & 0xff \ + }, \ + .id_len = 3, \ + .sector_size = (8*_page_size), \ + .n_sectors = (_n_sectors), \ + .page_size = _page_size, \ + .addr_width = 3, \ + .flags = SPI_NOR_NO_FR | SPI_S3AN, + /* NOTE: double check command sets and memory organization when you add * more nor chips. This current list focusses on newer chips, which * have been converging on command sets which including JEDEC ID. @@ -821,7 +959,7 @@ static const struct flash_info spi_nor_ids[] = { { "en25s64", INFO(0x1c3817, 0, 64 * 1024, 128, SECT_4K) }, /* ESMT */ - { "f25l32pa", INFO(0x8c2016, 0, 64 * 1024, 64, SECT_4K) }, + { "f25l32pa", INFO(0x8c2016, 0, 64 * 1024, 64, SECT_4K | SPI_NOR_HAS_LOCK) }, /* Everspin */ { "mr25h256", CAT25_INFO( 32 * 1024, 1, 256, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) }, @@ -833,6 +971,11 @@ static const struct flash_info spi_nor_ids[] = { /* GigaDevice */ { + "gd25q16", INFO(0xc84015, 0, 64 * 1024, 32, + SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | + SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) + }, + { "gd25q32", INFO(0xc84016, 0, 64 * 1024, 64, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) @@ -1014,6 +1157,13 @@ static const struct flash_info spi_nor_ids[] = { { "cat25c09", CAT25_INFO( 128, 8, 32, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) }, { "cat25c17", CAT25_INFO( 256, 8, 32, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) }, { "cat25128", CAT25_INFO(2048, 8, 64, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) }, + + /* Xilinx S3AN Internal Flash */ + { "3S50AN", S3AN_INFO(0x1f2200, 64, 264) }, + { "3S200AN", S3AN_INFO(0x1f2400, 256, 264) }, + { "3S400AN", S3AN_INFO(0x1f2400, 256, 264) }, + { "3S700AN", S3AN_INFO(0x1f2500, 512, 264) }, + { "3S1400AN", S3AN_INFO(0x1f2600, 512, 528) }, { }, }; @@ -1054,7 +1204,12 @@ static int spi_nor_read(struct mtd_info *mtd, loff_t from, size_t len, return ret; while (len) { - ret = nor->read(nor, from, len, buf); + loff_t addr = from; + + if (nor->flags & SNOR_F_S3AN_ADDR_DEFAULT) + addr = spi_nor_s3an_addr_convert(nor, addr); + + ret = nor->read(nor, addr, len, buf); if (ret == 0) { /* We shouldn't see 0-length reads */ ret = -EIO; @@ -1175,17 +1330,32 @@ static int spi_nor_write(struct mtd_info *mtd, loff_t to, size_t len, for (i = 0; i < len; ) { ssize_t written; + loff_t addr = to + i; + + /* + * If page_size is a power of two, the offset can be quickly + * calculated with an AND operation. On the other cases we + * need to do a modulus operation (more expensive). + * Power of two numbers have only one bit set and we can use + * the instruction hweight32 to detect if we need to do a + * modulus (do_div()) or not. + */ + if (hweight32(nor->page_size) == 1) { + page_offset = addr & (nor->page_size - 1); + } else { + uint64_t aux = addr; - page_offset = (to + i) & (nor->page_size - 1); - WARN_ONCE(page_offset, - "Writing at offset %zu into a NOR page. Writing partial pages may decrease reliability and increase wear of NOR flash.", - page_offset); + page_offset = do_div(aux, nor->page_size); + } /* the size of data remaining on the first page */ page_remain = min_t(size_t, nor->page_size - page_offset, len - i); + if (nor->flags & SNOR_F_S3AN_ADDR_DEFAULT) + addr = spi_nor_s3an_addr_convert(nor, addr); + write_enable(nor); - ret = nor->write(nor, to + i, page_remain, buf + i); + ret = nor->write(nor, addr, page_remain, buf + i); if (ret < 0) goto write_err; written = ret; @@ -1216,6 +1386,9 @@ static int macronix_quad_enable(struct spi_nor *nor) val = read_sr(nor); if (val < 0) return val; + if (val & SR_QUAD_EN_MX) + return 0; + write_enable(nor); write_sr(nor, val | SR_QUAD_EN_MX); @@ -1236,7 +1409,7 @@ static int macronix_quad_enable(struct spi_nor *nor) * Write status Register and configuration register with 2 bytes * The first byte will be written to the status register, while the * second byte will be written to the configuration register. - * Return negative if error occured. + * Return negative if error occurred. */ static int write_sr_cr(struct spi_nor *nor, u16 val) { @@ -1312,6 +1485,47 @@ static int spi_nor_check(struct spi_nor *nor) return 0; } +static int s3an_nor_scan(const struct flash_info *info, struct spi_nor *nor) +{ + int ret; + u8 val; + + ret = nor->read_reg(nor, SPINOR_OP_XRDSR, &val, 1); + if (ret < 0) { + dev_err(nor->dev, "error %d reading XRDSR\n", (int) ret); + return ret; + } + + nor->erase_opcode = SPINOR_OP_XSE; + nor->program_opcode = SPINOR_OP_XPP; + nor->read_opcode = SPINOR_OP_READ; + nor->flags |= SNOR_F_NO_OP_CHIP_ERASE; + + /* + * This flashes have a page size of 264 or 528 bytes (known as + * Default addressing mode). It can be changed to a more standard + * Power of two mode where the page size is 256/512. This comes + * with a price: there is 3% less of space, the data is corrupted + * and the page size cannot be changed back to default addressing + * mode. + * + * The current addressing mode can be read from the XRDSR register + * and should not be changed, because is a destructive operation. + */ + if (val & XSR_PAGESIZE) { + /* Flash in Power of 2 mode */ + nor->page_size = (nor->page_size == 264) ? 256 : 512; + nor->mtd.writebufsize = nor->page_size; + nor->mtd.size = 8 * nor->page_size * info->n_sectors; + nor->mtd.erasesize = 8 * nor->page_size; + } else { + /* Flash in Default addressing mode */ + nor->flags |= SNOR_F_S3AN_ADDR_DEFAULT; + } + + return 0; +} + int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode) { const struct flash_info *info = NULL; @@ -1360,6 +1574,14 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode) mutex_init(&nor->lock); /* + * Make sure the XSR_RDY flag is set before calling + * spi_nor_wait_till_ready(). Xilinx S3AN share MFR + * with Atmel spi-nor + */ + if (info->flags & SPI_S3AN) + nor->flags |= SNOR_F_READY_XSR_RDY; + + /* * Atmel, SST, Intel/Numonyx, and others serial NOR tend to power up * with the software protection bits set */ @@ -1483,27 +1705,10 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode) else if (mtd->size > 0x1000000) { /* enable 4-byte addressing if the device exceeds 16MiB */ nor->addr_width = 4; - if (JEDEC_MFR(info) == SNOR_MFR_SPANSION) { - /* Dedicated 4-byte command set */ - switch (nor->flash_read) { - case SPI_NOR_QUAD: - nor->read_opcode = SPINOR_OP_READ4_1_1_4; - break; - case SPI_NOR_DUAL: - nor->read_opcode = SPINOR_OP_READ4_1_1_2; - break; - case SPI_NOR_FAST: - nor->read_opcode = SPINOR_OP_READ4_FAST; - break; - case SPI_NOR_NORMAL: - nor->read_opcode = SPINOR_OP_READ4; - break; - } - nor->program_opcode = SPINOR_OP_PP_4B; - /* No small sector erase for 4-byte command set */ - nor->erase_opcode = SPINOR_OP_SE_4B; - mtd->erasesize = info->sector_size; - } else + if (JEDEC_MFR(info) == SNOR_MFR_SPANSION || + info->flags & SPI_NOR_4B_OPCODES) + spi_nor_set_4byte_opcodes(nor, info); + else set_4byte(nor, info, 1); } else { nor->addr_width = 3; @@ -1517,6 +1722,12 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode) nor->read_dummy = spi_nor_read_dummy_cycles(nor); + if (info->flags & SPI_S3AN) { + ret = s3an_nor_scan(info, nor); + if (ret) + return ret; + } + dev_info(dev, "%s (%lld Kbytes)\n", info->name, (long long)mtd->size >> 10); diff --git a/drivers/mtd/tests/mtd_test.h b/drivers/mtd/tests/mtd_test.h index 4b7bee17c924..04afd0e7074f 100644 --- a/drivers/mtd/tests/mtd_test.h +++ b/drivers/mtd/tests/mtd_test.h @@ -1,5 +1,5 @@ #include <linux/mtd/mtd.h> -#include <linux/sched.h> +#include <linux/sched/signal.h> static inline int mtdtest_relax(void) { diff --git a/drivers/mtd/ubi/block.c b/drivers/mtd/ubi/block.c index d1e6931c132f..c80869e60909 100644 --- a/drivers/mtd/ubi/block.c +++ b/drivers/mtd/ubi/block.c @@ -323,16 +323,15 @@ static int ubiblock_queue_rq(struct blk_mq_hw_ctx *hctx, struct ubiblock *dev = hctx->queue->queuedata; struct ubiblock_pdu *pdu = blk_mq_rq_to_pdu(req); - if (req->cmd_type != REQ_TYPE_FS) + switch (req_op(req)) { + case REQ_OP_READ: + ubi_sgl_init(&pdu->usgl); + queue_work(dev->wq, &pdu->work); + return BLK_MQ_RQ_QUEUE_OK; + default: return BLK_MQ_RQ_QUEUE_ERROR; + } - if (rq_data_dir(req) != READ) - return BLK_MQ_RQ_QUEUE_ERROR; /* Write not implemented */ - - ubi_sgl_init(&pdu->usgl); - queue_work(dev->wq, &pdu->work); - - return BLK_MQ_RQ_QUEUE_OK; } static int ubiblock_init_request(void *data, struct request *req, diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c index 85d54f37e28f..77513195f50e 100644 --- a/drivers/mtd/ubi/build.c +++ b/drivers/mtd/ubi/build.c @@ -1159,7 +1159,7 @@ static struct mtd_info * __init open_mtd_by_chdev(const char *mtd_dev) if (err) return ERR_PTR(err); - err = vfs_getattr(&path, &stat); + err = vfs_getattr(&path, &stat, STATX_TYPE, AT_STATX_SYNC_AS_STAT); path_put(&path); if (err) return ERR_PTR(err); diff --git a/drivers/mtd/ubi/kapi.c b/drivers/mtd/ubi/kapi.c index 88b1897aeb40..d4b2e8744498 100644 --- a/drivers/mtd/ubi/kapi.c +++ b/drivers/mtd/ubi/kapi.c @@ -314,7 +314,7 @@ struct ubi_volume_desc *ubi_open_volume_path(const char *pathname, int mode) if (error) return ERR_PTR(error); - error = vfs_getattr(&path, &stat); + error = vfs_getattr(&path, &stat, STATX_TYPE, AT_STATX_SYNC_AS_STAT); path_put(&path); if (error) return ERR_PTR(error); |