diff options
Diffstat (limited to 'drivers/net/can/usb')
| -rw-r--r-- | drivers/net/can/usb/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/net/can/usb/gs_usb.c | 4 | ||||
| -rw-r--r-- | drivers/net/can/usb/mcba_usb.c | 2 | ||||
| -rw-r--r-- | drivers/net/can/usb/peak_usb/pcan_usb_fd.c | 4 | ||||
| -rw-r--r-- | drivers/net/can/usb/peak_usb/pcan_usb_pro.c | 2 | ||||
| -rw-r--r-- | drivers/net/can/usb/ucan.c | 4 | ||||
| -rw-r--r-- | drivers/net/can/usb/usb_8dev.c | 4 |
7 files changed, 11 insertions, 11 deletions
diff --git a/drivers/net/can/usb/Kconfig b/drivers/net/can/usb/Kconfig index 77fa830fe7dd..bcb331b0c958 100644 --- a/drivers/net/can/usb/Kconfig +++ b/drivers/net/can/usb/Kconfig @@ -90,7 +90,7 @@ config CAN_PEAK_USB tristate "PEAK PCAN-USB/USB Pro interfaces for CAN 2.0b/CAN-FD" help This driver supports the PEAK-System Technik USB adapters that enable - access to the CAN bus, with repect to the CAN 2.0b and/or CAN-FD + access to the CAN bus, with respect to the CAN 2.0b and/or CAN-FD standards, that is: PCAN-USB single CAN 2.0b channel USB adapter diff --git a/drivers/net/can/usb/gs_usb.c b/drivers/net/can/usb/gs_usb.c index a4b4b742c80c..3005157059ca 100644 --- a/drivers/net/can/usb/gs_usb.c +++ b/drivers/net/can/usb/gs_usb.c @@ -828,7 +828,7 @@ static struct gs_can *gs_make_candev(unsigned int channel, netdev->flags |= IFF_ECHO; /* we support full roundtrip echo */ - /* dev settup */ + /* dev setup */ strcpy(dev->bt_const.name, "gs_usb"); dev->bt_const.tseg1_min = bt_const->tseg1_min; dev->bt_const.tseg1_max = bt_const->tseg1_max; @@ -852,7 +852,7 @@ static struct gs_can *gs_make_candev(unsigned int channel, dev->tx_context[rc].echo_id = GS_MAX_TX_URBS; } - /* can settup */ + /* can setup */ dev->can.state = CAN_STATE_STOPPED; dev->can.clock.freq = bt_const->fclk_can; dev->can.bittiming_const = &dev->bt_const; diff --git a/drivers/net/can/usb/mcba_usb.c b/drivers/net/can/usb/mcba_usb.c index 21faa2ec4632..eb6fb7435061 100644 --- a/drivers/net/can/usb/mcba_usb.c +++ b/drivers/net/can/usb/mcba_usb.c @@ -28,7 +28,7 @@ #define MCBA_CTX_FREE MCBA_MAX_TX_URBS /* RX buffer must be bigger than msg size since at the - * beggining USB messages are stacked. + * beginning USB messages are stacked. */ #define MCBA_USB_RX_BUFF_SIZE 64 #define MCBA_USB_TX_BUFF_SIZE (sizeof(struct mcba_usb_msg)) diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_fd.c b/drivers/net/can/usb/peak_usb/pcan_usb_fd.c index 47cc1ff5b88e..ab63fd9eb982 100644 --- a/drivers/net/can/usb/peak_usb/pcan_usb_fd.c +++ b/drivers/net/can/usb/peak_usb/pcan_usb_fd.c @@ -35,7 +35,7 @@ MODULE_SUPPORTED_DEVICE("PEAK-System PCAN-USB Pro FD adapter"); #define PCAN_UFD_RX_BUFFER_SIZE 2048 #define PCAN_UFD_TX_BUFFER_SIZE 512 -/* read some versions info from the hw devcie */ +/* read some versions info from the hw device */ struct __packed pcan_ufd_fw_info { __le16 size_of; /* sizeof this */ __le16 type; /* type of this structure */ @@ -796,7 +796,7 @@ static int pcan_usb_fd_start(struct peak_usb_device *dev) return err; } -/* socket callback used to copy berr counters values receieved through USB */ +/* socket callback used to copy berr counters values received through USB */ static int pcan_usb_fd_get_berr_counter(const struct net_device *netdev, struct can_berr_counter *bec) { diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_pro.c b/drivers/net/can/usb/peak_usb/pcan_usb_pro.c index 1689ab387612..f85b560e05db 100644 --- a/drivers/net/can/usb/peak_usb/pcan_usb_pro.c +++ b/drivers/net/can/usb/peak_usb/pcan_usb_pro.c @@ -973,7 +973,7 @@ int pcan_usb_pro_probe(struct usb_interface *intf) struct usb_endpoint_descriptor *ep = &if_desc->endpoint[i].desc; /* - * below is the list of valid ep addreses. Any other ep address + * below is the list of valid ep addresses. Any other ep address * is considered as not-CAN interface address => no dev created */ switch (ep->bEndpointAddress) { diff --git a/drivers/net/can/usb/ucan.c b/drivers/net/can/usb/ucan.c index 81e942f713e6..dc5290b36598 100644 --- a/drivers/net/can/usb/ucan.c +++ b/drivers/net/can/usb/ucan.c @@ -1445,7 +1445,7 @@ static int ucan_probe(struct usb_interface *intf, /* request the device information and store it in ctl_msg_buffer * - * note: ucan_ctrl_command_* wrappers connot be used yet + * note: ucan_ctrl_command_* wrappers cannot be used yet * because `up` is initialised in Stage 3 */ ret = usb_control_msg(udev, @@ -1494,7 +1494,7 @@ static int ucan_probe(struct usb_interface *intf, up = netdev_priv(netdev); - /* initialze data */ + /* initialize data */ up->udev = udev; up->intf = intf; up->netdev = netdev; diff --git a/drivers/net/can/usb/usb_8dev.c b/drivers/net/can/usb/usb_8dev.c index 8fa224b28218..62749c67c959 100644 --- a/drivers/net/can/usb/usb_8dev.c +++ b/drivers/net/can/usb/usb_8dev.c @@ -88,7 +88,7 @@ enum usb_8dev_cmd { /* status */ #define USB_8DEV_STATUSMSG_OK 0x00 /* Normal condition. */ -#define USB_8DEV_STATUSMSG_OVERRUN 0x01 /* Overrun occured when sending */ +#define USB_8DEV_STATUSMSG_OVERRUN 0x01 /* Overrun occurred when sending */ #define USB_8DEV_STATUSMSG_BUSLIGHT 0x02 /* Error counter has reached 96 */ #define USB_8DEV_STATUSMSG_BUSHEAVY 0x03 /* Error count. has reached 128 */ #define USB_8DEV_STATUSMSG_BUSOFF 0x04 /* Device is in BUSOFF */ @@ -165,7 +165,7 @@ struct __packed usb_8dev_rx_msg { /* command frame */ struct __packed usb_8dev_cmd_msg { u8 begin; - u8 channel; /* unkown - always 0 */ + u8 channel; /* unknown - always 0 */ u8 command; /* command to execute */ u8 opt1; /* optional parameter / return value */ u8 opt2; /* optional parameter 2 */ |