diff options
Diffstat (limited to 'drivers/net/wireless/b43/phy_common.h')
| -rw-r--r-- | drivers/net/wireless/b43/phy_common.h | 413 |
1 files changed, 413 insertions, 0 deletions
diff --git a/drivers/net/wireless/b43/phy_common.h b/drivers/net/wireless/b43/phy_common.h new file mode 100644 index 000000000000..c9f5430d1d7d --- /dev/null +++ b/drivers/net/wireless/b43/phy_common.h @@ -0,0 +1,413 @@ +#ifndef LINUX_B43_PHY_COMMON_H_ +#define LINUX_B43_PHY_COMMON_H_ + +#include <linux/rfkill.h> + +struct b43_wldev; + + +/* PHY register routing bits */ +#define B43_PHYROUTE 0x0C00 /* PHY register routing bits mask */ +#define B43_PHYROUTE_BASE 0x0000 /* Base registers */ +#define B43_PHYROUTE_OFDM_GPHY 0x0400 /* OFDM register routing for G-PHYs */ +#define B43_PHYROUTE_EXT_GPHY 0x0800 /* Extended G-PHY registers */ +#define B43_PHYROUTE_N_BMODE 0x0C00 /* N-PHY BMODE registers */ + +/* CCK (B-PHY) registers. */ +#define B43_PHY_CCK(reg) ((reg) | B43_PHYROUTE_BASE) +/* N-PHY registers. */ +#define B43_PHY_N(reg) ((reg) | B43_PHYROUTE_BASE) +/* N-PHY BMODE registers. */ +#define B43_PHY_N_BMODE(reg) ((reg) | B43_PHYROUTE_N_BMODE) +/* OFDM (A-PHY) registers. */ +#define B43_PHY_OFDM(reg) ((reg) | B43_PHYROUTE_OFDM_GPHY) +/* Extended G-PHY registers. */ +#define B43_PHY_EXTG(reg) ((reg) | B43_PHYROUTE_EXT_GPHY) + + +/* Masks for the PHY versioning registers. */ +#define B43_PHYVER_ANALOG 0xF000 +#define B43_PHYVER_ANALOG_SHIFT 12 +#define B43_PHYVER_TYPE 0x0F00 +#define B43_PHYVER_TYPE_SHIFT 8 +#define B43_PHYVER_VERSION 0x00FF + +/** + * enum b43_interference_mitigation - Interference Mitigation mode + * + * @B43_INTERFMODE_NONE: Disabled + * @B43_INTERFMODE_NONWLAN: Non-WLAN Interference Mitigation + * @B43_INTERFMODE_MANUALWLAN: WLAN Interference Mitigation + * @B43_INTERFMODE_AUTOWLAN: Automatic WLAN Interference Mitigation + */ +enum b43_interference_mitigation { + B43_INTERFMODE_NONE, + B43_INTERFMODE_NONWLAN, + B43_INTERFMODE_MANUALWLAN, + B43_INTERFMODE_AUTOWLAN, +}; + +/* Antenna identifiers */ +enum { + B43_ANTENNA0, /* Antenna 0 */ + B43_ANTENNA1, /* Antenna 0 */ + B43_ANTENNA_AUTO1, /* Automatic, starting with antenna 1 */ + B43_ANTENNA_AUTO0, /* Automatic, starting with antenna 0 */ + B43_ANTENNA2, + B43_ANTENNA3 = 8, + + B43_ANTENNA_AUTO = B43_ANTENNA_AUTO0, + B43_ANTENNA_DEFAULT = B43_ANTENNA_AUTO, +}; + +/** + * enum b43_txpwr_result - Return value for the recalc_txpower PHY op. + * + * @B43_TXPWR_RES_NEED_ADJUST: Values changed. Hardware adjustment is needed. + * @B43_TXPWR_RES_DONE: No more work to do. Everything is done. + */ +enum b43_txpwr_result { + B43_TXPWR_RES_NEED_ADJUST, + B43_TXPWR_RES_DONE, +}; + +/** + * struct b43_phy_operations - Function pointers for PHY ops. + * + * @allocate: Allocate and initialise the PHY data structures. + * Must not be NULL. + * @free: Destroy and free the PHY data structures. + * Must not be NULL. + * + * @prepare_structs: Prepare the PHY data structures. + * The data structures allocated in @allocate are + * initialized here. + * Must not be NULL. + * @prepare_hardware: Prepare the PHY. This is called before b43_chip_init to + * do some early early PHY hardware init. + * Can be NULL, if not required. + * @init: Initialize the PHY. + * Must not be NULL. + * @exit: Shutdown the PHY. + * Can be NULL, if not required. + * + * @phy_read: Read from a PHY register. + * Must not be NULL. + * @phy_write: Write to a PHY register. + * Must not be NULL. + * @radio_read: Read from a Radio register. + * Must not be NULL. + * @radio_write: Write to a Radio register. + * Must not be NULL. + * + * @supports_hwpctl: Returns a boolean whether Hardware Power Control + * is supported or not. + * If NULL, hwpctl is assumed to be never supported. + * @software_rfkill: Turn the radio ON or OFF. + * Possible state values are + * RFKILL_STATE_SOFT_BLOCKED or + * RFKILL_STATE_UNBLOCKED + * Must not be NULL. + * @switch_analog: Turn the Analog on/off. + * Must not be NULL. + * @switch_channel: Switch the radio to another channel. + * Must not be NULL. + * @get_default_chan: Just returns the default channel number. + * Must not be NULL. + * @set_rx_antenna: Set the antenna used for RX. + * Can be NULL, if not supported. + * @interf_mitigation: Switch the Interference Mitigation mode. + * Can be NULL, if not supported. + * + * @recalc_txpower: Recalculate the transmission power parameters. + * This callback has to recalculate the TX power settings, + * but does not need to write them to the hardware, yet. + * Returns enum b43_txpwr_result to indicate whether the hardware + * needs to be adjusted. + * If B43_TXPWR_NEED_ADJUST is returned, @adjust_txpower + * will be called later. + * If the parameter "ignore_tssi" is true, the TSSI values should + * be ignored and a recalculation of the power settings should be + * done even if the TSSI values did not change. + * This callback is called with wl->irq_lock held and must not sleep. + * Must not be NULL. + * @adjust_txpower: Write the previously calculated TX power settings + * (from @recalc_txpower) to the hardware. + * This function may sleep. + * Can be NULL, if (and ONLY if) @recalc_txpower _always_ + * returns B43_TXPWR_RES_DONE. + * + * @pwork_15sec: Periodic work. Called every 15 seconds. + * Can be NULL, if not required. + * @pwork_60sec: Periodic work. Called every 60 seconds. + * Can be NULL, if not required. + */ +struct b43_phy_operations { + /* Initialisation */ + int (*allocate)(struct b43_wldev *dev); + void (*free)(struct b43_wldev *dev); + void (*prepare_structs)(struct b43_wldev *dev); + int (*prepare_hardware)(struct b43_wldev *dev); + int (*init)(struct b43_wldev *dev); + void (*exit)(struct b43_wldev *dev); + + /* Register access */ + u16 (*phy_read)(struct b43_wldev *dev, u16 reg); + void (*phy_write)(struct b43_wldev *dev, u16 reg, u16 value); + u16 (*radio_read)(struct b43_wldev *dev, u16 reg); + void (*radio_write)(struct b43_wldev *dev, u16 reg, u16 value); + + /* Radio */ + bool (*supports_hwpctl)(struct b43_wldev *dev); + void (*software_rfkill)(struct b43_wldev *dev, enum rfkill_state state); + void (*switch_analog)(struct b43_wldev *dev, bool on); + int (*switch_channel)(struct b43_wldev *dev, unsigned int new_channel); + unsigned int (*get_default_chan)(struct b43_wldev *dev); + void (*set_rx_antenna)(struct b43_wldev *dev, int antenna); + int (*interf_mitigation)(struct b43_wldev *dev, + enum b43_interference_mitigation new_mode); + + /* Transmission power adjustment */ + enum b43_txpwr_result (*recalc_txpower)(struct b43_wldev *dev, + bool ignore_tssi); + void (*adjust_txpower)(struct b43_wldev *dev); + + /* Misc */ + void (*pwork_15sec)(struct b43_wldev *dev); + void (*pwork_60sec)(struct b43_wldev *dev); +}; + +struct b43_phy_a; +struct b43_phy_g; +struct b43_phy_n; +struct b43_phy_lp; + +struct b43_phy { + /* Hardware operation callbacks. */ + const struct b43_phy_operations *ops; + + /* Most hardware context information is stored in the standard- + * specific data structures pointed to by the pointers below. + * Only one of them is valid (the currently enabled PHY). */ +#ifdef CONFIG_B43_DEBUG + /* No union for debug build to force NULL derefs in buggy code. */ + struct { +#else + union { +#endif + /* A-PHY specific information */ + struct b43_phy_a *a; + /* G-PHY specific information */ + struct b43_phy_g *g; + /* N-PHY specific information */ + struct b43_phy_n *n; + /* LP-PHY specific information */ + struct b43_phy_lp *lp; + }; + + /* Band support flags. */ + bool supports_2ghz; + bool supports_5ghz; + + /* GMODE bit enabled? */ + bool gmode; + + /* Analog Type */ + u8 analog; + /* B43_PHYTYPE_ */ + u8 type; + /* PHY revision number. */ + u8 rev; + + /* Radio versioning */ + u16 radio_manuf; /* Radio manufacturer */ + u16 radio_ver; /* Radio version */ + u8 radio_rev; /* Radio revision */ + + /* Software state of the radio */ + bool radio_on; + + /* Desired TX power level (in dBm). + * This is set by the user and adjusted in b43_phy_xmitpower(). */ + int desired_txpower; + + /* Hardware Power Control enabled? */ + bool hardware_power_control; + + /* The time (in absolute jiffies) when the next TX power output + * check is needed. */ + unsigned long next_txpwr_check_time; + + /* current channel */ + unsigned int channel; + + /* PHY TX errors counter. */ + atomic_t txerr_cnt; + +#ifdef CONFIG_B43_DEBUG + /* PHY registers locked by b43_phy_lock()? */ + bool phy_locked; +#endif /* B43_DEBUG */ +}; + + +/** + * b43_phy_allocate - Allocate PHY structs + * Allocate the PHY data structures, based on the current dev->phy.type + */ +int b43_phy_allocate(struct b43_wldev *dev); + +/** + * b43_phy_free - Free PHY structs + */ +void b43_phy_free(struct b43_wldev *dev); + +/** + * b43_phy_init - Initialise the PHY + */ +int b43_phy_init(struct b43_wldev *dev); + +/** + * b43_phy_exit - Cleanup PHY + */ +void b43_phy_exit(struct b43_wldev *dev); + +/** + * b43_has_hardware_pctl - Hardware Power Control supported? + * Returns a boolean, whether hardware power control is supported. + */ +bool b43_has_hardware_pctl(struct b43_wldev *dev); + +/** + * b43_phy_read - 16bit PHY register read access + */ +u16 b43_phy_read(struct b43_wldev *dev, u16 reg); + +/** + * b43_phy_write - 16bit PHY register write access + */ +void b43_phy_write(struct b43_wldev *dev, u16 reg, u16 value); + +/** + * b43_phy_mask - Mask a PHY register with a mask + */ +void b43_phy_mask(struct b43_wldev *dev, u16 offset, u16 mask); + +/** + * b43_phy_set - OR a PHY register with a bitmap + */ +void b43_phy_set(struct b43_wldev *dev, u16 offset, u16 set); + +/** + * b43_phy_maskset - Mask and OR a PHY register with a mask and bitmap + */ +void b43_phy_maskset(struct b43_wldev *dev, u16 offset, u16 mask, u16 set); + +/** + * b43_radio_read - 16bit Radio register read access + */ +u16 b43_radio_read(struct b43_wldev *dev, u16 reg); +#define b43_radio_read16 b43_radio_read /* DEPRECATED */ + +/** + * b43_radio_write - 16bit Radio register write access + */ +void b43_radio_write(struct b43_wldev *dev, u16 reg, u16 value); +#define b43_radio_write16 b43_radio_write /* DEPRECATED */ + +/** + * b43_radio_mask - Mask a 16bit radio register with a mask + */ +void b43_radio_mask(struct b43_wldev *dev, u16 offset, u16 mask); + +/** + * b43_radio_set - OR a 16bit radio register with a bitmap + */ +void b43_radio_set(struct b43_wldev *dev, u16 offset, u16 set); + +/** + * b43_radio_maskset - Mask and OR a radio register with a mask and bitmap + */ +void b43_radio_maskset(struct b43_wldev *dev, u16 offset, u16 mask, u16 set); + +/** + * b43_radio_lock - Lock firmware radio register access + */ +void b43_radio_lock(struct b43_wldev *dev); + +/** + * b43_radio_unlock - Unlock firmware radio register access + */ +void b43_radio_unlock(struct b43_wldev *dev); + +/** + * b43_phy_lock - Lock firmware PHY register access + */ +void b43_phy_lock(struct b43_wldev *dev); + +/** + * b43_phy_unlock - Unlock firmware PHY register access + */ +void b43_phy_unlock(struct b43_wldev *dev); + +/** + * b43_switch_channel - Switch to another channel + */ +int b43_switch_channel(struct b43_wldev *dev, unsigned int new_channel); +/** + * B43_DEFAULT_CHANNEL - Switch to the default channel. + */ +#define B43_DEFAULT_CHANNEL UINT_MAX + +/** + * b43_software_rfkill - Turn the radio ON or OFF in software. + */ +void b43_software_rfkill(struct b43_wldev *dev, enum rfkill_state state); + +/** + * b43_phy_txpower_check - Check TX power output. + * + * Compare the current TX power output to the desired power emission + * and schedule an adjustment in case it mismatches. + * Requires wl->irq_lock locked. + * + * @flags: OR'ed enum b43_phy_txpower_check_flags flags. + * See the docs below. + */ +void b43_phy_txpower_check(struct b43_wldev *dev, unsigned int flags); +/** + * enum b43_phy_txpower_check_flags - Flags for b43_phy_txpower_check() + * + * @B43_TXPWR_IGNORE_TIME: Ignore the schedule time and force-redo + * the check now. + * @B43_TXPWR_IGNORE_TSSI: Redo the recalculation, even if the average + * TSSI did not change. + */ +enum b43_phy_txpower_check_flags { + B43_TXPWR_IGNORE_TIME = (1 << 0), + B43_TXPWR_IGNORE_TSSI = (1 << 1), +}; + +struct work_struct; +void b43_phy_txpower_adjust_work(struct work_struct *work); + +/** + * b43_phy_shm_tssi_read - Read the average of the last 4 TSSI from SHM. + * + * @shm_offset: The SHM address to read the values from. + * + * Returns the average of the 4 TSSI values, or a negative error code. + */ +int b43_phy_shm_tssi_read(struct b43_wldev *dev, u16 shm_offset); + +/** + * b43_phy_switch_analog_generic - Generic PHY operation for switching the Analog. + * + * It does the switching based on the PHY0 core register. + * Do _not_ call this directly. Only use it as a switch_analog callback + * for struct b43_phy_operations. + */ +void b43_phyop_switch_analog_generic(struct b43_wldev *dev, bool on); + + +#endif /* LINUX_B43_PHY_COMMON_H_ */ |