diff options
Diffstat (limited to 'drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h')
-rw-r--r-- | drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h | 377 |
1 files changed, 377 insertions, 0 deletions
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h new file mode 100644 index 000000000000..5ec7a6d87672 --- /dev/null +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h @@ -0,0 +1,377 @@ +/* + * Copyright (c) 2010 Broadcom Corporation + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY + * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION + * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN + * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef BRCMFMAC_SDIO_H +#define BRCMFMAC_SDIO_H + +#include <linux/skbuff.h> +#include <linux/firmware.h> +#include "firmware.h" + +#define SDIO_FUNC_0 0 +#define SDIO_FUNC_1 1 +#define SDIO_FUNC_2 2 + +#define SDIOD_FBR_SIZE 0x100 + +/* io_en */ +#define SDIO_FUNC_ENABLE_1 0x02 +#define SDIO_FUNC_ENABLE_2 0x04 + +/* io_rdys */ +#define SDIO_FUNC_READY_1 0x02 +#define SDIO_FUNC_READY_2 0x04 + +/* intr_status */ +#define INTR_STATUS_FUNC1 0x2 +#define INTR_STATUS_FUNC2 0x4 + +/* Maximum number of I/O funcs */ +#define SDIOD_MAX_IOFUNCS 7 + +/* mask of register map */ +#define REG_F0_REG_MASK 0x7FF +#define REG_F1_MISC_MASK 0x1FFFF + +/* as of sdiod rev 0, supports 3 functions */ +#define SBSDIO_NUM_FUNCTION 3 + +/* function 0 vendor specific CCCR registers */ +#define SDIO_CCCR_BRCM_CARDCAP 0xf0 +#define SDIO_CCCR_BRCM_CARDCAP_CMD14_SUPPORT 0x02 +#define SDIO_CCCR_BRCM_CARDCAP_CMD14_EXT 0x04 +#define SDIO_CCCR_BRCM_CARDCAP_CMD_NODEC 0x08 +#define SDIO_CCCR_BRCM_CARDCTRL 0xf1 +#define SDIO_CCCR_BRCM_CARDCTRL_WLANRESET 0x02 +#define SDIO_CCCR_BRCM_SEPINT 0xf2 + +#define SDIO_SEPINT_MASK 0x01 +#define SDIO_SEPINT_OE 0x02 +#define SDIO_SEPINT_ACT_HI 0x04 + +/* function 1 miscellaneous registers */ + +/* sprom command and status */ +#define SBSDIO_SPROM_CS 0x10000 +/* sprom info register */ +#define SBSDIO_SPROM_INFO 0x10001 +/* sprom indirect access data byte 0 */ +#define SBSDIO_SPROM_DATA_LOW 0x10002 +/* sprom indirect access data byte 1 */ +#define SBSDIO_SPROM_DATA_HIGH 0x10003 +/* sprom indirect access addr byte 0 */ +#define SBSDIO_SPROM_ADDR_LOW 0x10004 +/* gpio select */ +#define SBSDIO_GPIO_SELECT 0x10005 +/* gpio output */ +#define SBSDIO_GPIO_OUT 0x10006 +/* gpio enable */ +#define SBSDIO_GPIO_EN 0x10007 +/* rev < 7, watermark for sdio device */ +#define SBSDIO_WATERMARK 0x10008 +/* control busy signal generation */ +#define SBSDIO_DEVICE_CTL 0x10009 + +/* SB Address Window Low (b15) */ +#define SBSDIO_FUNC1_SBADDRLOW 0x1000A +/* SB Address Window Mid (b23:b16) */ +#define SBSDIO_FUNC1_SBADDRMID 0x1000B +/* SB Address Window High (b31:b24) */ +#define SBSDIO_FUNC1_SBADDRHIGH 0x1000C +/* Frame Control (frame term/abort) */ +#define SBSDIO_FUNC1_FRAMECTRL 0x1000D +/* ChipClockCSR (ALP/HT ctl/status) */ +#define SBSDIO_FUNC1_CHIPCLKCSR 0x1000E +/* SdioPullUp (on cmd, d0-d2) */ +#define SBSDIO_FUNC1_SDIOPULLUP 0x1000F +/* Write Frame Byte Count Low */ +#define SBSDIO_FUNC1_WFRAMEBCLO 0x10019 +/* Write Frame Byte Count High */ +#define SBSDIO_FUNC1_WFRAMEBCHI 0x1001A +/* Read Frame Byte Count Low */ +#define SBSDIO_FUNC1_RFRAMEBCLO 0x1001B +/* Read Frame Byte Count High */ +#define SBSDIO_FUNC1_RFRAMEBCHI 0x1001C +/* MesBusyCtl (rev 11) */ +#define SBSDIO_FUNC1_MESBUSYCTRL 0x1001D +/* Sdio Core Rev 12 */ +#define SBSDIO_FUNC1_WAKEUPCTRL 0x1001E +#define SBSDIO_FUNC1_WCTRL_ALPWAIT_MASK 0x1 +#define SBSDIO_FUNC1_WCTRL_ALPWAIT_SHIFT 0 +#define SBSDIO_FUNC1_WCTRL_HTWAIT_MASK 0x2 +#define SBSDIO_FUNC1_WCTRL_HTWAIT_SHIFT 1 +#define SBSDIO_FUNC1_SLEEPCSR 0x1001F +#define SBSDIO_FUNC1_SLEEPCSR_KSO_MASK 0x1 +#define SBSDIO_FUNC1_SLEEPCSR_KSO_SHIFT 0 +#define SBSDIO_FUNC1_SLEEPCSR_KSO_EN 1 +#define SBSDIO_FUNC1_SLEEPCSR_DEVON_MASK 0x2 +#define SBSDIO_FUNC1_SLEEPCSR_DEVON_SHIFT 1 + +#define SBSDIO_FUNC1_MISC_REG_START 0x10000 /* f1 misc register start */ +#define SBSDIO_FUNC1_MISC_REG_LIMIT 0x1001F /* f1 misc register end */ + +/* function 1 OCP space */ + +/* sb offset addr is <= 15 bits, 32k */ +#define SBSDIO_SB_OFT_ADDR_MASK 0x07FFF +#define SBSDIO_SB_OFT_ADDR_LIMIT 0x08000 +/* with b15, maps to 32-bit SB access */ +#define SBSDIO_SB_ACCESS_2_4B_FLAG 0x08000 + +/* valid bits in SBSDIO_FUNC1_SBADDRxxx regs */ + +#define SBSDIO_SBADDRLOW_MASK 0x80 /* Valid bits in SBADDRLOW */ +#define SBSDIO_SBADDRMID_MASK 0xff /* Valid bits in SBADDRMID */ +#define SBSDIO_SBADDRHIGH_MASK 0xffU /* Valid bits in SBADDRHIGH */ +/* Address bits from SBADDR regs */ +#define SBSDIO_SBWINDOW_MASK 0xffff8000 + +#define SDIOH_READ 0 /* Read request */ +#define SDIOH_WRITE 1 /* Write request */ + +#define SDIOH_DATA_FIX 0 /* Fixed addressing */ +#define SDIOH_DATA_INC 1 /* Incremental addressing */ + +/* internal return code */ +#define SUCCESS 0 +#define ERROR 1 + +/* Packet alignment for most efficient SDIO (can change based on platform) */ +#define BRCMF_SDALIGN (1 << 6) + +/* watchdog polling interval */ +#define BRCMF_WD_POLL msecs_to_jiffies(10) + +/** + * enum brcmf_sdiod_state - the state of the bus. + * + * @BRCMF_SDIOD_DOWN: Device can be accessed, no DPC. + * @BRCMF_SDIOD_DATA: Ready for data transfers, DPC enabled. + * @BRCMF_SDIOD_NOMEDIUM: No medium access to dongle possible. + */ +enum brcmf_sdiod_state { + BRCMF_SDIOD_DOWN, + BRCMF_SDIOD_DATA, + BRCMF_SDIOD_NOMEDIUM +}; + +struct brcmf_sdreg { + int func; + int offset; + int value; +}; + +struct brcmf_sdio; +struct brcmf_sdiod_freezer; + +struct brcmf_sdio_dev { + struct sdio_func *func[SDIO_MAX_FUNCS]; + u8 num_funcs; /* Supported funcs on client */ + u32 sbwad; /* Save backplane window address */ + struct brcmf_sdio *bus; + struct device *dev; + struct brcmf_bus *bus_if; + struct brcmfmac_sdio_platform_data *pdata; + bool oob_irq_requested; + bool irq_en; /* irq enable flags */ + spinlock_t irq_en_lock; + bool irq_wake; /* irq wake enable flags */ + bool sg_support; + uint max_request_size; + ushort max_segment_count; + uint max_segment_size; + uint txglomsz; + struct sg_table sgtable; + char fw_name[BRCMF_FW_NAME_LEN]; + char nvram_name[BRCMF_FW_NAME_LEN]; + bool wowl_enabled; + enum brcmf_sdiod_state state; + struct brcmf_sdiod_freezer *freezer; +}; + +/* sdio core registers */ +struct sdpcmd_regs { + u32 corecontrol; /* 0x00, rev8 */ + u32 corestatus; /* rev8 */ + u32 PAD[1]; + u32 biststatus; /* rev8 */ + + /* PCMCIA access */ + u16 pcmciamesportaladdr; /* 0x010, rev8 */ + u16 PAD[1]; + u16 pcmciamesportalmask; /* rev8 */ + u16 PAD[1]; + u16 pcmciawrframebc; /* rev8 */ + u16 PAD[1]; + u16 pcmciaunderflowtimer; /* rev8 */ + u16 PAD[1]; + + /* interrupt */ + u32 intstatus; /* 0x020, rev8 */ + u32 hostintmask; /* rev8 */ + u32 intmask; /* rev8 */ + u32 sbintstatus; /* rev8 */ + u32 sbintmask; /* rev8 */ + u32 funcintmask; /* rev4 */ + u32 PAD[2]; + u32 tosbmailbox; /* 0x040, rev8 */ + u32 tohostmailbox; /* rev8 */ + u32 tosbmailboxdata; /* rev8 */ + u32 tohostmailboxdata; /* rev8 */ + + /* synchronized access to registers in SDIO clock domain */ + u32 sdioaccess; /* 0x050, rev8 */ + u32 PAD[3]; + + /* PCMCIA frame control */ + u8 pcmciaframectrl; /* 0x060, rev8 */ + u8 PAD[3]; + u8 pcmciawatermark; /* rev8 */ + u8 PAD[155]; + + /* interrupt batching control */ + u32 intrcvlazy; /* 0x100, rev8 */ + u32 PAD[3]; + + /* counters */ + u32 cmd52rd; /* 0x110, rev8 */ + u32 cmd52wr; /* rev8 */ + u32 cmd53rd; /* rev8 */ + u32 cmd53wr; /* rev8 */ + u32 abort; /* rev8 */ + u32 datacrcerror; /* rev8 */ + u32 rdoutofsync; /* rev8 */ + u32 wroutofsync; /* rev8 */ + u32 writebusy; /* rev8 */ + u32 readwait; /* rev8 */ + u32 readterm; /* rev8 */ + u32 writeterm; /* rev8 */ + u32 PAD[40]; + u32 clockctlstatus; /* rev8 */ + u32 PAD[7]; + + u32 PAD[128]; /* DMA engines */ + + /* SDIO/PCMCIA CIS region */ + char cis[512]; /* 0x400-0x5ff, rev6 */ + + /* PCMCIA function control registers */ + char pcmciafcr[256]; /* 0x600-6ff, rev6 */ + u16 PAD[55]; + + /* PCMCIA backplane access */ + u16 backplanecsr; /* 0x76E, rev6 */ + u16 backplaneaddr0; /* rev6 */ + u16 backplaneaddr1; /* rev6 */ + u16 backplaneaddr2; /* rev6 */ + u16 backplaneaddr3; /* rev6 */ + u16 backplanedata0; /* rev6 */ + u16 backplanedata1; /* rev6 */ + u16 backplanedata2; /* rev6 */ + u16 backplanedata3; /* rev6 */ + u16 PAD[31]; + + /* sprom "size" & "blank" info */ + u16 spromstatus; /* 0x7BE, rev2 */ + u32 PAD[464]; + + u16 PAD[0x80]; +}; + +/* Register/deregister interrupt handler. */ +int brcmf_sdiod_intr_register(struct brcmf_sdio_dev *sdiodev); +int brcmf_sdiod_intr_unregister(struct brcmf_sdio_dev *sdiodev); + +/* sdio device register access interface */ +u8 brcmf_sdiod_regrb(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret); +u32 brcmf_sdiod_regrl(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret); +void brcmf_sdiod_regwb(struct brcmf_sdio_dev *sdiodev, u32 addr, u8 data, + int *ret); +void brcmf_sdiod_regwl(struct brcmf_sdio_dev *sdiodev, u32 addr, u32 data, + int *ret); + +/* Buffer transfer to/from device (client) core via cmd53. + * fn: function number + * flags: backplane width, address increment, sync/async + * buf: pointer to memory data buffer + * nbytes: number of bytes to transfer to/from buf + * pkt: pointer to packet associated with buf (if any) + * complete: callback function for command completion (async only) + * handle: handle for completion callback (first arg in callback) + * Returns 0 or error code. + * NOTE: Async operation is not currently supported. + */ +int brcmf_sdiod_send_pkt(struct brcmf_sdio_dev *sdiodev, + struct sk_buff_head *pktq); +int brcmf_sdiod_send_buf(struct brcmf_sdio_dev *sdiodev, u8 *buf, uint nbytes); + +int brcmf_sdiod_recv_pkt(struct brcmf_sdio_dev *sdiodev, struct sk_buff *pkt); +int brcmf_sdiod_recv_buf(struct brcmf_sdio_dev *sdiodev, u8 *buf, uint nbytes); +int brcmf_sdiod_recv_chain(struct brcmf_sdio_dev *sdiodev, + struct sk_buff_head *pktq, uint totlen); + +/* Flags bits */ + +/* Four-byte target (backplane) width (vs. two-byte) */ +#define SDIO_REQ_4BYTE 0x1 +/* Fixed address (FIFO) (vs. incrementing address) */ +#define SDIO_REQ_FIXED 0x2 + +/* Read/write to memory block (F1, no FIFO) via CMD53 (sync only). + * rw: read or write (0/1) + * addr: direct SDIO address + * buf: pointer to memory data buffer + * nbytes: number of bytes to transfer to/from buf + * Returns 0 or error code. + */ +int brcmf_sdiod_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address, + u8 *data, uint size); + +/* Issue an abort to the specified function */ +int brcmf_sdiod_abort(struct brcmf_sdio_dev *sdiodev, uint fn); +void brcmf_sdiod_change_state(struct brcmf_sdio_dev *sdiodev, + enum brcmf_sdiod_state state); +#ifdef CONFIG_PM_SLEEP +bool brcmf_sdiod_freezing(struct brcmf_sdio_dev *sdiodev); +void brcmf_sdiod_try_freeze(struct brcmf_sdio_dev *sdiodev); +void brcmf_sdiod_freezer_count(struct brcmf_sdio_dev *sdiodev); +void brcmf_sdiod_freezer_uncount(struct brcmf_sdio_dev *sdiodev); +#else +static inline bool brcmf_sdiod_freezing(struct brcmf_sdio_dev *sdiodev) +{ + return false; +} +static inline void brcmf_sdiod_try_freeze(struct brcmf_sdio_dev *sdiodev) +{ +} +static inline void brcmf_sdiod_freezer_count(struct brcmf_sdio_dev *sdiodev) +{ +} +static inline void brcmf_sdiod_freezer_uncount(struct brcmf_sdio_dev *sdiodev) +{ +} +#endif /* CONFIG_PM_SLEEP */ + +struct brcmf_sdio *brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev); +void brcmf_sdio_remove(struct brcmf_sdio *bus); +void brcmf_sdio_isr(struct brcmf_sdio *bus); + +void brcmf_sdio_wd_timer(struct brcmf_sdio *bus, bool active); +void brcmf_sdio_wowl_config(struct device *dev, bool enabled); +int brcmf_sdio_sleep(struct brcmf_sdio *bus, bool sleep); +void brcmf_sdio_trigger_dpc(struct brcmf_sdio *bus); + +#endif /* BRCMFMAC_SDIO_H */ |