diff options
Diffstat (limited to 'drivers/net/wireless/intel/iwlwifi/fw/api/config.h')
| -rw-r--r-- | drivers/net/wireless/intel/iwlwifi/fw/api/config.h | 184 |
1 files changed, 184 insertions, 0 deletions
diff --git a/drivers/net/wireless/intel/iwlwifi/fw/api/config.h b/drivers/net/wireless/intel/iwlwifi/fw/api/config.h new file mode 100644 index 000000000000..7f645b62804e --- /dev/null +++ b/drivers/net/wireless/intel/iwlwifi/fw/api/config.h @@ -0,0 +1,184 @@ +/****************************************************************************** + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved. + * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH + * Copyright(c) 2016 - 2017 Intel Deutschland GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * The full GNU General Public License is included in this distribution + * in the file called COPYING. + * + * Contact Information: + * Intel Linux Wireless <linuxwifi@intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + * BSD LICENSE + * + * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved. + * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH + * Copyright(c) 2016 - 2017 Intel Deutschland GmbH + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + *****************************************************************************/ + +#ifndef __iwl_fw_api_config_h__ +#define __iwl_fw_api_config_h__ + +/* + * struct iwl_dqa_enable_cmd + * @cmd_queue: the TXQ number of the command queue + */ +struct iwl_dqa_enable_cmd { + __le32 cmd_queue; +} __packed; /* DQA_CONTROL_CMD_API_S_VER_1 */ + +/* + * struct iwl_tx_ant_cfg_cmd + * @valid: valid antenna configuration + */ +struct iwl_tx_ant_cfg_cmd { + __le32 valid; +} __packed; + +/** + * struct iwl_calib_ctrl - Calibration control struct. + * Sent as part of the phy configuration command. + * @flow_trigger: bitmap for which calibrations to perform according to + * flow triggers, using &enum iwl_calib_cfg + * @event_trigger: bitmap for which calibrations to perform according to + * event triggers, using &enum iwl_calib_cfg + */ +struct iwl_calib_ctrl { + __le32 flow_trigger; + __le32 event_trigger; +} __packed; + +/* This enum defines the bitmap of various calibrations to enable in both + * init ucode and runtime ucode through CALIBRATION_CFG_CMD. + */ +enum iwl_calib_cfg { + IWL_CALIB_CFG_XTAL_IDX = BIT(0), + IWL_CALIB_CFG_TEMPERATURE_IDX = BIT(1), + IWL_CALIB_CFG_VOLTAGE_READ_IDX = BIT(2), + IWL_CALIB_CFG_PAPD_IDX = BIT(3), + IWL_CALIB_CFG_TX_PWR_IDX = BIT(4), + IWL_CALIB_CFG_DC_IDX = BIT(5), + IWL_CALIB_CFG_BB_FILTER_IDX = BIT(6), + IWL_CALIB_CFG_LO_LEAKAGE_IDX = BIT(7), + IWL_CALIB_CFG_TX_IQ_IDX = BIT(8), + IWL_CALIB_CFG_TX_IQ_SKEW_IDX = BIT(9), + IWL_CALIB_CFG_RX_IQ_IDX = BIT(10), + IWL_CALIB_CFG_RX_IQ_SKEW_IDX = BIT(11), + IWL_CALIB_CFG_SENSITIVITY_IDX = BIT(12), + IWL_CALIB_CFG_CHAIN_NOISE_IDX = BIT(13), + IWL_CALIB_CFG_DISCONNECTED_ANT_IDX = BIT(14), + IWL_CALIB_CFG_ANT_COUPLING_IDX = BIT(15), + IWL_CALIB_CFG_DAC_IDX = BIT(16), + IWL_CALIB_CFG_ABS_IDX = BIT(17), + IWL_CALIB_CFG_AGC_IDX = BIT(18), +}; + +/** + * struct iwl_phy_cfg_cmd - Phy configuration command + * @phy_cfg: PHY configuration value, uses &enum iwl_fw_phy_cfg + * @calib_control: calibration control data + */ +struct iwl_phy_cfg_cmd { + __le32 phy_cfg; + struct iwl_calib_ctrl calib_control; +} __packed; + +#define PHY_CFG_RADIO_TYPE (BIT(0) | BIT(1)) +#define PHY_CFG_RADIO_STEP (BIT(2) | BIT(3)) +#define PHY_CFG_RADIO_DASH (BIT(4) | BIT(5)) +#define PHY_CFG_PRODUCT_NUMBER (BIT(6) | BIT(7)) +#define PHY_CFG_TX_CHAIN_A BIT(8) +#define PHY_CFG_TX_CHAIN_B BIT(9) +#define PHY_CFG_TX_CHAIN_C BIT(10) +#define PHY_CFG_RX_CHAIN_A BIT(12) +#define PHY_CFG_RX_CHAIN_B BIT(13) +#define PHY_CFG_RX_CHAIN_C BIT(14) + +/* + * enum iwl_dc2dc_config_id - flag ids + * + * Ids of dc2dc configuration flags + */ +enum iwl_dc2dc_config_id { + DCDC_LOW_POWER_MODE_MSK_SET = 0x1, /* not used */ + DCDC_FREQ_TUNE_SET = 0x2, +}; /* MARKER_ID_API_E_VER_1 */ + +/** + * struct iwl_dc2dc_config_cmd - configure dc2dc values + * + * (DC2DC_CONFIG_CMD = 0x83) + * + * Set/Get & configure dc2dc values. + * The command always returns the current dc2dc values. + * + * @flags: set/get dc2dc + * @enable_low_power_mode: not used. + * @dc2dc_freq_tune0: frequency divider - digital domain + * @dc2dc_freq_tune1: frequency divider - analog domain + */ +struct iwl_dc2dc_config_cmd { + __le32 flags; + __le32 enable_low_power_mode; /* not used */ + __le32 dc2dc_freq_tune0; + __le32 dc2dc_freq_tune1; +} __packed; /* DC2DC_CONFIG_CMD_API_S_VER_1 */ + +/** + * struct iwl_dc2dc_config_resp - response for iwl_dc2dc_config_cmd + * + * Current dc2dc values returned by the FW. + * + * @dc2dc_freq_tune0: frequency divider - digital domain + * @dc2dc_freq_tune1: frequency divider - analog domain + */ +struct iwl_dc2dc_config_resp { + __le32 dc2dc_freq_tune0; + __le32 dc2dc_freq_tune1; +} __packed; /* DC2DC_CONFIG_RESP_API_S_VER_1 */ + +#endif /* __iwl_fw_api_config_h__ */ |