diff options
Diffstat (limited to 'drivers/net/wireless/intel/iwlwifi/mvm/fw-api-tx.h')
| -rw-r--r-- | drivers/net/wireless/intel/iwlwifi/mvm/fw-api-tx.h | 646 |
1 files changed, 646 insertions, 0 deletions
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-tx.h b/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-tx.h new file mode 100644 index 000000000000..0036d18334af --- /dev/null +++ b/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-tx.h @@ -0,0 +1,646 @@ +/****************************************************************************** + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called COPYING. + * + * Contact Information: + * Intel Linux Wireless <linuxwifi@intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + * BSD LICENSE + * + * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + *****************************************************************************/ + +#ifndef __fw_api_tx_h__ +#define __fw_api_tx_h__ + +/** + * enum iwl_tx_flags - bitmasks for tx_flags in TX command + * @TX_CMD_FLG_PROT_REQUIRE: use RTS or CTS-to-self to protect the frame + * @TX_CMD_FLG_WRITE_TX_POWER: update current tx power value in the mgmt frame + * @TX_CMD_FLG_ACK: expect ACK from receiving station + * @TX_CMD_FLG_STA_RATE: use RS table with initial index from the TX command. + * Otherwise, use rate_n_flags from the TX command + * @TX_CMD_FLG_BAR: this frame is a BA request, immediate BAR is expected + * Must set TX_CMD_FLG_ACK with this flag. + * @TX_CMD_FLG_VHT_NDPA: mark frame is NDPA for VHT beamformer sequence + * @TX_CMD_FLG_HT_NDPA: mark frame is NDPA for HT beamformer sequence + * @TX_CMD_FLG_CSI_FDBK2HOST: mark to send feedback to host (only if good CRC) + * @TX_CMD_FLG_BT_PRIO_POS: the position of the BT priority (bit 11 is ignored + * on old firmwares). + * @TX_CMD_FLG_BT_DIS: disable BT priority for this frame + * @TX_CMD_FLG_SEQ_CTL: set if FW should override the sequence control. + * Should be set for mgmt, non-QOS data, mcast, bcast and in scan command + * @TX_CMD_FLG_MORE_FRAG: this frame is non-last MPDU + * @TX_CMD_FLG_TSF: FW should calculate and insert TSF in the frame + * Should be set for beacons and probe responses + * @TX_CMD_FLG_CALIB: activate PA TX power calibrations + * @TX_CMD_FLG_KEEP_SEQ_CTL: if seq_ctl is set, don't increase inner seq count + * @TX_CMD_FLG_MH_PAD: driver inserted 2 byte padding after MAC header. + * Should be set for 26/30 length MAC headers + * @TX_CMD_FLG_RESP_TO_DRV: zero this if the response should go only to FW + * @TX_CMD_FLG_CCMP_AGG: this frame uses CCMP for aggregation acceleration + * @TX_CMD_FLG_TKIP_MIC_DONE: FW already performed TKIP MIC calculation + * @TX_CMD_FLG_DUR: disable duration overwriting used in PS-Poll Assoc-id + * @TX_CMD_FLG_FW_DROP: FW should mark frame to be dropped + * @TX_CMD_FLG_EXEC_PAPD: execute PAPD + * @TX_CMD_FLG_PAPD_TYPE: 0 for reference power, 1 for nominal power + * @TX_CMD_FLG_HCCA_CHUNK: mark start of TSPEC chunk + */ +enum iwl_tx_flags { + TX_CMD_FLG_PROT_REQUIRE = BIT(0), + TX_CMD_FLG_WRITE_TX_POWER = BIT(1), + TX_CMD_FLG_ACK = BIT(3), + TX_CMD_FLG_STA_RATE = BIT(4), + TX_CMD_FLG_BAR = BIT(6), + TX_CMD_FLG_TXOP_PROT = BIT(7), + TX_CMD_FLG_VHT_NDPA = BIT(8), + TX_CMD_FLG_HT_NDPA = BIT(9), + TX_CMD_FLG_CSI_FDBK2HOST = BIT(10), + TX_CMD_FLG_BT_PRIO_POS = 11, + TX_CMD_FLG_BT_DIS = BIT(12), + TX_CMD_FLG_SEQ_CTL = BIT(13), + TX_CMD_FLG_MORE_FRAG = BIT(14), + TX_CMD_FLG_TSF = BIT(16), + TX_CMD_FLG_CALIB = BIT(17), + TX_CMD_FLG_KEEP_SEQ_CTL = BIT(18), + TX_CMD_FLG_MH_PAD = BIT(20), + TX_CMD_FLG_RESP_TO_DRV = BIT(21), + TX_CMD_FLG_CCMP_AGG = BIT(22), + TX_CMD_FLG_TKIP_MIC_DONE = BIT(23), + TX_CMD_FLG_DUR = BIT(25), + TX_CMD_FLG_FW_DROP = BIT(26), + TX_CMD_FLG_EXEC_PAPD = BIT(27), + TX_CMD_FLG_PAPD_TYPE = BIT(28), + TX_CMD_FLG_HCCA_CHUNK = BIT(31) +}; /* TX_FLAGS_BITS_API_S_VER_1 */ + +/** + * enum iwl_tx_pm_timeouts - pm timeout values in TX command + * @PM_FRAME_NONE: no need to suspend sleep mode + * @PM_FRAME_MGMT: fw suspend sleep mode for 100TU + * @PM_FRAME_ASSOC: fw suspend sleep mode for 10sec + */ +enum iwl_tx_pm_timeouts { + PM_FRAME_NONE = 0, + PM_FRAME_MGMT = 2, + PM_FRAME_ASSOC = 3, +}; + +/* + * TX command security control + */ +#define TX_CMD_SEC_WEP 0x01 +#define TX_CMD_SEC_CCM 0x02 +#define TX_CMD_SEC_TKIP 0x03 +#define TX_CMD_SEC_EXT 0x04 +#define TX_CMD_SEC_MSK 0x07 +#define TX_CMD_SEC_WEP_KEY_IDX_POS 6 +#define TX_CMD_SEC_WEP_KEY_IDX_MSK 0xc0 +#define TX_CMD_SEC_KEY128 0x08 + +/* TODO: how does these values are OK with only 16 bit variable??? */ +/* + * TX command next frame info + * + * bits 0:2 - security control (TX_CMD_SEC_*) + * bit 3 - immediate ACK required + * bit 4 - rate is taken from STA table + * bit 5 - frame belongs to BA stream + * bit 6 - immediate BA response expected + * bit 7 - unused + * bits 8:15 - Station ID + * bits 16:31 - rate + */ +#define TX_CMD_NEXT_FRAME_ACK_MSK (0x8) +#define TX_CMD_NEXT_FRAME_STA_RATE_MSK (0x10) +#define TX_CMD_NEXT_FRAME_BA_MSK (0x20) +#define TX_CMD_NEXT_FRAME_IMM_BA_RSP_MSK (0x40) +#define TX_CMD_NEXT_FRAME_FLAGS_MSK (0xf8) +#define TX_CMD_NEXT_FRAME_STA_ID_MSK (0xff00) +#define TX_CMD_NEXT_FRAME_STA_ID_POS (8) +#define TX_CMD_NEXT_FRAME_RATE_MSK (0xffff0000) +#define TX_CMD_NEXT_FRAME_RATE_POS (16) + +/* + * TX command Frame life time in us - to be written in pm_frame_timeout + */ +#define TX_CMD_LIFE_TIME_INFINITE 0xFFFFFFFF +#define TX_CMD_LIFE_TIME_DEFAULT 2000000 /* 2000 ms*/ +#define TX_CMD_LIFE_TIME_PROBE_RESP 40000 /* 40 ms */ +#define TX_CMD_LIFE_TIME_EXPIRED_FRAME 0 + +/* + * TID for non QoS frames - to be written in tid_tspec + */ +#define IWL_TID_NON_QOS IWL_MAX_TID_COUNT + +/* + * Limits on the retransmissions - to be written in {data,rts}_retry_limit + */ +#define IWL_DEFAULT_TX_RETRY 15 +#define IWL_MGMT_DFAULT_RETRY_LIMIT 3 +#define IWL_RTS_DFAULT_RETRY_LIMIT 60 +#define IWL_BAR_DFAULT_RETRY_LIMIT 60 +#define IWL_LOW_RETRY_LIMIT 7 + +/* TODO: complete documentation for try_cnt and btkill_cnt */ +/** + * struct iwl_tx_cmd - TX command struct to FW + * ( TX_CMD = 0x1c ) + * @len: in bytes of the payload, see below for details + * @tx_flags: combination of TX_CMD_FLG_* + * @rate_n_flags: rate for *all* Tx attempts, if TX_CMD_FLG_STA_RATE_MSK is + * cleared. Combination of RATE_MCS_* + * @sta_id: index of destination station in FW station table + * @sec_ctl: security control, TX_CMD_SEC_* + * @initial_rate_index: index into the the rate table for initial TX attempt. + * Applied if TX_CMD_FLG_STA_RATE_MSK is set, normally 0 for data frames. + * @key: security key + * @next_frame_flags: TX_CMD_SEC_* and TX_CMD_NEXT_FRAME_* + * @life_time: frame life time (usecs??) + * @dram_lsb_ptr: Physical address of scratch area in the command (try_cnt + + * btkill_cnd + reserved), first 32 bits. "0" disables usage. + * @dram_msb_ptr: upper bits of the scratch physical address + * @rts_retry_limit: max attempts for RTS + * @data_retry_limit: max attempts to send the data packet + * @tid_spec: TID/tspec + * @pm_frame_timeout: PM TX frame timeout + * + * The byte count (both len and next_frame_len) includes MAC header + * (24/26/30/32 bytes) + * + 2 bytes pad if 26/30 header size + * + 8 byte IV for CCM or TKIP (not used for WEP) + * + Data payload + * + 8-byte MIC (not used for CCM/WEP) + * It does not include post-MAC padding, i.e., + * MIC (CCM) 8 bytes, ICV (WEP/TKIP/CKIP) 4 bytes, CRC 4 bytes. + * Range of len: 14-2342 bytes. + * + * After the struct fields the MAC header is placed, plus any padding, + * and then the actial payload. + */ +struct iwl_tx_cmd { + __le16 len; + __le16 next_frame_len; + __le32 tx_flags; + struct { + u8 try_cnt; + u8 btkill_cnt; + __le16 reserved; + } scratch; /* DRAM_SCRATCH_API_U_VER_1 */ + __le32 rate_n_flags; + u8 sta_id; + u8 sec_ctl; + u8 initial_rate_index; + u8 reserved2; + u8 key[16]; + __le32 reserved3; + __le32 life_time; + __le32 dram_lsb_ptr; + u8 dram_msb_ptr; + u8 rts_retry_limit; + u8 data_retry_limit; + u8 tid_tspec; + __le16 pm_frame_timeout; + __le16 reserved4; + u8 payload[0]; + struct ieee80211_hdr hdr[0]; +} __packed; /* TX_CMD_API_S_VER_3 */ + +/* + * TX response related data + */ + +/* + * enum iwl_tx_status - status that is returned by the fw after attempts to Tx + * @TX_STATUS_SUCCESS: + * @TX_STATUS_DIRECT_DONE: + * @TX_STATUS_POSTPONE_DELAY: + * @TX_STATUS_POSTPONE_FEW_BYTES: + * @TX_STATUS_POSTPONE_BT_PRIO: + * @TX_STATUS_POSTPONE_QUIET_PERIOD: + * @TX_STATUS_POSTPONE_CALC_TTAK: + * @TX_STATUS_FAIL_INTERNAL_CROSSED_RETRY: + * @TX_STATUS_FAIL_SHORT_LIMIT: + * @TX_STATUS_FAIL_LONG_LIMIT: + * @TX_STATUS_FAIL_UNDERRUN: + * @TX_STATUS_FAIL_DRAIN_FLOW: + * @TX_STATUS_FAIL_RFKILL_FLUSH: + * @TX_STATUS_FAIL_LIFE_EXPIRE: + * @TX_STATUS_FAIL_DEST_PS: + * @TX_STATUS_FAIL_HOST_ABORTED: + * @TX_STATUS_FAIL_BT_RETRY: + * @TX_STATUS_FAIL_STA_INVALID: + * @TX_TATUS_FAIL_FRAG_DROPPED: + * @TX_STATUS_FAIL_TID_DISABLE: + * @TX_STATUS_FAIL_FIFO_FLUSHED: + * @TX_STATUS_FAIL_SMALL_CF_POLL: + * @TX_STATUS_FAIL_FW_DROP: + * @TX_STATUS_FAIL_STA_COLOR_MISMATCH: mismatch between color of Tx cmd and + * STA table + * @TX_FRAME_STATUS_INTERNAL_ABORT: + * @TX_MODE_MSK: + * @TX_MODE_NO_BURST: + * @TX_MODE_IN_BURST_SEQ: + * @TX_MODE_FIRST_IN_BURST: + * @TX_QUEUE_NUM_MSK: + * + * Valid only if frame_count =1 + * TODO: complete documentation + */ +enum iwl_tx_status { + TX_STATUS_MSK = 0x000000ff, + TX_STATUS_SUCCESS = 0x01, + TX_STATUS_DIRECT_DONE = 0x02, + /* postpone TX */ + TX_STATUS_POSTPONE_DELAY = 0x40, + TX_STATUS_POSTPONE_FEW_BYTES = 0x41, + TX_STATUS_POSTPONE_BT_PRIO = 0x42, + TX_STATUS_POSTPONE_QUIET_PERIOD = 0x43, + TX_STATUS_POSTPONE_CALC_TTAK = 0x44, + /* abort TX */ + TX_STATUS_FAIL_INTERNAL_CROSSED_RETRY = 0x81, + TX_STATUS_FAIL_SHORT_LIMIT = 0x82, + TX_STATUS_FAIL_LONG_LIMIT = 0x83, + TX_STATUS_FAIL_UNDERRUN = 0x84, + TX_STATUS_FAIL_DRAIN_FLOW = 0x85, + TX_STATUS_FAIL_RFKILL_FLUSH = 0x86, + TX_STATUS_FAIL_LIFE_EXPIRE = 0x87, + TX_STATUS_FAIL_DEST_PS = 0x88, + TX_STATUS_FAIL_HOST_ABORTED = 0x89, + TX_STATUS_FAIL_BT_RETRY = 0x8a, + TX_STATUS_FAIL_STA_INVALID = 0x8b, + TX_STATUS_FAIL_FRAG_DROPPED = 0x8c, + TX_STATUS_FAIL_TID_DISABLE = 0x8d, + TX_STATUS_FAIL_FIFO_FLUSHED = 0x8e, + TX_STATUS_FAIL_SMALL_CF_POLL = 0x8f, + TX_STATUS_FAIL_FW_DROP = 0x90, + TX_STATUS_FAIL_STA_COLOR_MISMATCH = 0x91, + TX_STATUS_INTERNAL_ABORT = 0x92, + TX_MODE_MSK = 0x00000f00, + TX_MODE_NO_BURST = 0x00000000, + TX_MODE_IN_BURST_SEQ = 0x00000100, + TX_MODE_FIRST_IN_BURST = 0x00000200, + TX_QUEUE_NUM_MSK = 0x0001f000, + TX_NARROW_BW_MSK = 0x00060000, + TX_NARROW_BW_1DIV2 = 0x00020000, + TX_NARROW_BW_1DIV4 = 0x00040000, + TX_NARROW_BW_1DIV8 = 0x00060000, +}; + +/* + * enum iwl_tx_agg_status - TX aggregation status + * @AGG_TX_STATE_STATUS_MSK: + * @AGG_TX_STATE_TRANSMITTED: + * @AGG_TX_STATE_UNDERRUN: + * @AGG_TX_STATE_BT_PRIO: + * @AGG_TX_STATE_FEW_BYTES: + * @AGG_TX_STATE_ABORT: + * @AGG_TX_STATE_LAST_SENT_TTL: + * @AGG_TX_STATE_LAST_SENT_TRY_CNT: + * @AGG_TX_STATE_LAST_SENT_BT_KILL: + * @AGG_TX_STATE_SCD_QUERY: + * @AGG_TX_STATE_TEST_BAD_CRC32: + * @AGG_TX_STATE_RESPONSE: + * @AGG_TX_STATE_DUMP_TX: + * @AGG_TX_STATE_DELAY_TX: + * @AGG_TX_STATE_TRY_CNT_MSK: Retry count for 1st frame in aggregation (retries + * occur if tx failed for this frame when it was a member of a previous + * aggregation block). If rate scaling is used, retry count indicates the + * rate table entry used for all frames in the new agg. + *@ AGG_TX_STATE_SEQ_NUM_MSK: Command ID and sequence number of Tx command for + * this frame + * + * TODO: complete documentation + */ +enum iwl_tx_agg_status { + AGG_TX_STATE_STATUS_MSK = 0x00fff, + AGG_TX_STATE_TRANSMITTED = 0x000, + AGG_TX_STATE_UNDERRUN = 0x001, + AGG_TX_STATE_BT_PRIO = 0x002, + AGG_TX_STATE_FEW_BYTES = 0x004, + AGG_TX_STATE_ABORT = 0x008, + AGG_TX_STATE_LAST_SENT_TTL = 0x010, + AGG_TX_STATE_LAST_SENT_TRY_CNT = 0x020, + AGG_TX_STATE_LAST_SENT_BT_KILL = 0x040, + AGG_TX_STATE_SCD_QUERY = 0x080, + AGG_TX_STATE_TEST_BAD_CRC32 = 0x0100, + AGG_TX_STATE_RESPONSE = 0x1ff, + AGG_TX_STATE_DUMP_TX = 0x200, + AGG_TX_STATE_DELAY_TX = 0x400, + AGG_TX_STATE_TRY_CNT_POS = 12, + AGG_TX_STATE_TRY_CNT_MSK = 0xf << AGG_TX_STATE_TRY_CNT_POS, +}; + +#define AGG_TX_STATE_LAST_SENT_MSK (AGG_TX_STATE_LAST_SENT_TTL| \ + AGG_TX_STATE_LAST_SENT_TRY_CNT| \ + AGG_TX_STATE_LAST_SENT_BT_KILL) + +/* + * The mask below describes a status where we are absolutely sure that the MPDU + * wasn't sent. For BA/Underrun we cannot be that sure. All we know that we've + * written the bytes to the TXE, but we know nothing about what the DSP did. + */ +#define AGG_TX_STAT_FRAME_NOT_SENT (AGG_TX_STATE_FEW_BYTES | \ + AGG_TX_STATE_ABORT | \ + AGG_TX_STATE_SCD_QUERY) + +/* + * REPLY_TX = 0x1c (response) + * + * This response may be in one of two slightly different formats, indicated + * by the frame_count field: + * + * 1) No aggregation (frame_count == 1). This reports Tx results for a single + * frame. Multiple attempts, at various bit rates, may have been made for + * this frame. + * + * 2) Aggregation (frame_count > 1). This reports Tx results for two or more + * frames that used block-acknowledge. All frames were transmitted at + * same rate. Rate scaling may have been used if first frame in this new + * agg block failed in previous agg block(s). + * + * Note that, for aggregation, ACK (block-ack) status is not delivered + * here; block-ack has not been received by the time the device records + * this status. + * This status relates to reasons the tx might have been blocked or aborted + * within the device, rather than whether it was received successfully by + * the destination station. + */ + +/** + * struct agg_tx_status - per packet TX aggregation status + * @status: enum iwl_tx_agg_status + * @sequence: Sequence # for this frame's Tx cmd (not SSN!) + */ +struct agg_tx_status { + __le16 status; + __le16 sequence; +} __packed; + +/* + * definitions for initial rate index field + * bits [3:0] initial rate index + * bits [6:4] rate table color, used for the initial rate + * bit-7 invalid rate indication + */ +#define TX_RES_INIT_RATE_INDEX_MSK 0x0f +#define TX_RES_RATE_TABLE_COLOR_MSK 0x70 +#define TX_RES_INV_RATE_INDEX_MSK 0x80 + +#define IWL_MVM_TX_RES_GET_TID(_ra_tid) ((_ra_tid) & 0x0f) +#define IWL_MVM_TX_RES_GET_RA(_ra_tid) ((_ra_tid) >> 4) + +/** + * struct iwl_mvm_tx_resp - notifies that fw is TXing a packet + * ( REPLY_TX = 0x1c ) + * @frame_count: 1 no aggregation, >1 aggregation + * @bt_kill_count: num of times blocked by bluetooth (unused for agg) + * @failure_rts: num of failures due to unsuccessful RTS + * @failure_frame: num failures due to no ACK (unused for agg) + * @initial_rate: for non-agg: rate of the successful Tx. For agg: rate of the + * Tx of all the batch. RATE_MCS_* + * @wireless_media_time: for non-agg: RTS + CTS + frame tx attempts time + ACK. + * for agg: RTS + CTS + aggregation tx time + block-ack time. + * in usec. + * @pa_status: tx power info + * @pa_integ_res_a: tx power info + * @pa_integ_res_b: tx power info + * @pa_integ_res_c: tx power info + * @measurement_req_id: tx power info + * @tfd_info: TFD information set by the FH + * @seq_ctl: sequence control from the Tx cmd + * @byte_cnt: byte count from the Tx cmd + * @tlc_info: TLC rate info + * @ra_tid: bits [3:0] = ra, bits [7:4] = tid + * @frame_ctrl: frame control + * @status: for non-agg: frame status TX_STATUS_* + * for agg: status of 1st frame, AGG_TX_STATE_*; other frame status fields + * follow this one, up to frame_count. + * + * After the array of statuses comes the SSN of the SCD. Look at + * %iwl_mvm_get_scd_ssn for more details. + */ +struct iwl_mvm_tx_resp { + u8 frame_count; + u8 bt_kill_count; + u8 failure_rts; + u8 failure_frame; + __le32 initial_rate; + __le16 wireless_media_time; + + u8 pa_status; + u8 pa_integ_res_a[3]; + u8 pa_integ_res_b[3]; + u8 pa_integ_res_c[3]; + __le16 measurement_req_id; + u8 reduced_tpc; + u8 reserved; + + __le32 tfd_info; + __le16 seq_ctl; + __le16 byte_cnt; + u8 tlc_info; + u8 ra_tid; + __le16 frame_ctrl; + + struct agg_tx_status status; +} __packed; /* TX_RSP_API_S_VER_3 */ + +/** + * struct iwl_mvm_ba_notif - notifies about reception of BA + * ( BA_NOTIF = 0xc5 ) + * @sta_addr_lo32: lower 32 bits of the MAC address + * @sta_addr_hi16: upper 16 bits of the MAC address + * @sta_id: Index of recipient (BA-sending) station in fw's station table + * @tid: tid of the session + * @seq_ctl: + * @bitmap: the bitmap of the BA notification as seen in the air + * @scd_flow: the tx queue this BA relates to + * @scd_ssn: the index of the last contiguously sent packet + * @txed: number of Txed frames in this batch + * @txed_2_done: number of Acked frames in this batch + */ +struct iwl_mvm_ba_notif { + __le32 sta_addr_lo32; + __le16 sta_addr_hi16; + __le16 reserved; + + u8 sta_id; + u8 tid; + __le16 seq_ctl; + __le64 bitmap; + __le16 scd_flow; + __le16 scd_ssn; + u8 txed; + u8 txed_2_done; + __le16 reserved1; +} __packed; + +/* + * struct iwl_mac_beacon_cmd - beacon template command + * @tx: the tx commands associated with the beacon frame + * @template_id: currently equal to the mac context id of the coresponding + * mac. + * @tim_idx: the offset of the tim IE in the beacon + * @tim_size: the length of the tim IE + * @frame: the template of the beacon frame + */ +struct iwl_mac_beacon_cmd { + struct iwl_tx_cmd tx; + __le32 template_id; + __le32 tim_idx; + __le32 tim_size; + struct ieee80211_hdr frame[0]; +} __packed; + +struct iwl_beacon_notif { + struct iwl_mvm_tx_resp beacon_notify_hdr; + __le64 tsf; + __le32 ibss_mgr_status; +} __packed; + +/** + * struct iwl_extended_beacon_notif - notifies about beacon transmission + * @beacon_notify_hdr: tx response command associated with the beacon + * @tsf: last beacon tsf + * @ibss_mgr_status: whether IBSS is manager + * @gp2: last beacon time in gp2 + */ +struct iwl_extended_beacon_notif { + struct iwl_mvm_tx_resp beacon_notify_hdr; + __le64 tsf; + __le32 ibss_mgr_status; + __le32 gp2; +} __packed; /* BEACON_NTFY_API_S_VER_5 */ + +/** + * enum iwl_dump_control - dump (flush) control flags + * @DUMP_TX_FIFO_FLUSH: Dump MSDUs until the the FIFO is empty + * and the TFD queues are empty. + */ +enum iwl_dump_control { + DUMP_TX_FIFO_FLUSH = BIT(1), +}; + +/** + * struct iwl_tx_path_flush_cmd -- queue/FIFO flush command + * @queues_ctl: bitmap of queues to flush + * @flush_ctl: control flags + * @reserved: reserved + */ +struct iwl_tx_path_flush_cmd { + __le32 queues_ctl; + __le16 flush_ctl; + __le16 reserved; +} __packed; /* TX_PATH_FLUSH_CMD_API_S_VER_1 */ + +/** + * iwl_mvm_get_scd_ssn - returns the SSN of the SCD + * @tx_resp: the Tx response from the fw (agg or non-agg) + * + * When the fw sends an AMPDU, it fetches the MPDUs one after the other. Since + * it can't know that everything will go well until the end of the AMPDU, it + * can't know in advance the number of MPDUs that will be sent in the current + * batch. This is why it writes the agg Tx response while it fetches the MPDUs. + * Hence, it can't know in advance what the SSN of the SCD will be at the end + * of the batch. This is why the SSN of the SCD is written at the end of the + * whole struct at a variable offset. This function knows how to cope with the + * variable offset and returns the SSN of the SCD. + */ +static inline u32 iwl_mvm_get_scd_ssn(struct iwl_mvm_tx_resp *tx_resp) +{ + return le32_to_cpup((__le32 *)&tx_resp->status + + tx_resp->frame_count) & 0xfff; +} + +/** + * struct iwl_scd_txq_cfg_cmd - New txq hw scheduler config command + * @token: + * @sta_id: station id + * @tid: + * @scd_queue: scheduler queue to confiug + * @enable: 1 queue enable, 0 queue disable + * @aggregate: 1 aggregated queue, 0 otherwise + * @tx_fifo: %enum iwl_mvm_tx_fifo + * @window: BA window size + * @ssn: SSN for the BA agreement + */ +struct iwl_scd_txq_cfg_cmd { + u8 token; + u8 sta_id; + u8 tid; + u8 scd_queue; + u8 enable; + u8 aggregate; + u8 tx_fifo; + u8 window; + __le16 ssn; + __le16 reserved; +} __packed; /* SCD_QUEUE_CFG_CMD_API_S_VER_1 */ + +/** + * struct iwl_scd_txq_cfg_rsp + * @token: taken from the command + * @sta_id: station id from the command + * @tid: tid from the command + * @scd_queue: scd_queue from the command + */ +struct iwl_scd_txq_cfg_rsp { + u8 token; + u8 sta_id; + u8 tid; + u8 scd_queue; +} __packed; /* SCD_QUEUE_CFG_RSP_API_S_VER_1 */ + +#endif /* __fw_api_tx_h__ */ |