diff options
Diffstat (limited to 'drivers/power/supply/twl4030_charger.c')
| -rw-r--r-- | drivers/power/supply/twl4030_charger.c | 1162 |
1 files changed, 1162 insertions, 0 deletions
diff --git a/drivers/power/supply/twl4030_charger.c b/drivers/power/supply/twl4030_charger.c new file mode 100644 index 000000000000..bcd4dc304f27 --- /dev/null +++ b/drivers/power/supply/twl4030_charger.c @@ -0,0 +1,1162 @@ +/* + * TWL4030/TPS65950 BCI (Battery Charger Interface) driver + * + * Copyright (C) 2010 Gražvydas Ignotas <notasas@gmail.com> + * + * based on twl4030_bci_battery.c by TI + * Copyright (C) 2008 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/err.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/i2c/twl.h> +#include <linux/power_supply.h> +#include <linux/notifier.h> +#include <linux/usb/otg.h> +#include <linux/iio/consumer.h> + +#define TWL4030_BCIMDEN 0x00 +#define TWL4030_BCIMDKEY 0x01 +#define TWL4030_BCIMSTATEC 0x02 +#define TWL4030_BCIICHG 0x08 +#define TWL4030_BCIVAC 0x0a +#define TWL4030_BCIVBUS 0x0c +#define TWL4030_BCIMFSTS3 0x0F +#define TWL4030_BCIMFSTS4 0x10 +#define TWL4030_BCICTL1 0x23 +#define TWL4030_BB_CFG 0x12 +#define TWL4030_BCIIREF1 0x27 +#define TWL4030_BCIIREF2 0x28 +#define TWL4030_BCIMFKEY 0x11 +#define TWL4030_BCIMFEN3 0x14 +#define TWL4030_BCIMFTH8 0x1d +#define TWL4030_BCIMFTH9 0x1e +#define TWL4030_BCIWDKEY 0x21 + +#define TWL4030_BCIMFSTS1 0x01 + +#define TWL4030_BCIAUTOWEN BIT(5) +#define TWL4030_CONFIG_DONE BIT(4) +#define TWL4030_CVENAC BIT(2) +#define TWL4030_BCIAUTOUSB BIT(1) +#define TWL4030_BCIAUTOAC BIT(0) +#define TWL4030_CGAIN BIT(5) +#define TWL4030_USBFASTMCHG BIT(2) +#define TWL4030_STS_VBUS BIT(7) +#define TWL4030_STS_USB_ID BIT(2) +#define TWL4030_BBCHEN BIT(4) +#define TWL4030_BBSEL_MASK 0x0c +#define TWL4030_BBSEL_2V5 0x00 +#define TWL4030_BBSEL_3V0 0x04 +#define TWL4030_BBSEL_3V1 0x08 +#define TWL4030_BBSEL_3V2 0x0c +#define TWL4030_BBISEL_MASK 0x03 +#define TWL4030_BBISEL_25uA 0x00 +#define TWL4030_BBISEL_150uA 0x01 +#define TWL4030_BBISEL_500uA 0x02 +#define TWL4030_BBISEL_1000uA 0x03 + +#define TWL4030_BATSTSPCHG BIT(2) +#define TWL4030_BATSTSMCHG BIT(6) + +/* BCI interrupts */ +#define TWL4030_WOVF BIT(0) /* Watchdog overflow */ +#define TWL4030_TMOVF BIT(1) /* Timer overflow */ +#define TWL4030_ICHGHIGH BIT(2) /* Battery charge current high */ +#define TWL4030_ICHGLOW BIT(3) /* Battery cc. low / FSM state change */ +#define TWL4030_ICHGEOC BIT(4) /* Battery current end-of-charge */ +#define TWL4030_TBATOR2 BIT(5) /* Battery temperature out of range 2 */ +#define TWL4030_TBATOR1 BIT(6) /* Battery temperature out of range 1 */ +#define TWL4030_BATSTS BIT(7) /* Battery status */ + +#define TWL4030_VBATLVL BIT(0) /* VBAT level */ +#define TWL4030_VBATOV BIT(1) /* VBAT overvoltage */ +#define TWL4030_VBUSOV BIT(2) /* VBUS overvoltage */ +#define TWL4030_ACCHGOV BIT(3) /* Ac charger overvoltage */ + +#define TWL4030_MSTATEC_USB BIT(4) +#define TWL4030_MSTATEC_AC BIT(5) +#define TWL4030_MSTATEC_MASK 0x0f +#define TWL4030_MSTATEC_QUICK1 0x02 +#define TWL4030_MSTATEC_QUICK7 0x07 +#define TWL4030_MSTATEC_COMPLETE1 0x0b +#define TWL4030_MSTATEC_COMPLETE4 0x0e + +/* + * If AC (Accessory Charger) voltage exceeds 4.5V (MADC 11) + * then AC is available. + */ +static inline int ac_available(struct iio_channel *channel_vac) +{ + int val, err; + + if (!channel_vac) + return 0; + + err = iio_read_channel_processed(channel_vac, &val); + if (err < 0) + return 0; + return val > 4500; +} + +static bool allow_usb; +module_param(allow_usb, bool, 0644); +MODULE_PARM_DESC(allow_usb, "Allow USB charge drawing default current"); + +struct twl4030_bci { + struct device *dev; + struct power_supply *ac; + struct power_supply *usb; + struct usb_phy *transceiver; + struct notifier_block usb_nb; + struct work_struct work; + int irq_chg; + int irq_bci; + int usb_enabled; + + /* + * ichg_* and *_cur values in uA. If any are 'large', we set + * CGAIN to '1' which doubles the range for half the + * precision. + */ + unsigned int ichg_eoc, ichg_lo, ichg_hi; + unsigned int usb_cur, ac_cur; + struct iio_channel *channel_vac; + bool ac_is_active; + int usb_mode, ac_mode; /* charging mode requested */ +#define CHARGE_OFF 0 +#define CHARGE_AUTO 1 +#define CHARGE_LINEAR 2 + + /* When setting the USB current we slowly increase the + * requested current until target is reached or the voltage + * drops below 4.75V. In the latter case we step back one + * step. + */ + unsigned int usb_cur_target; + struct delayed_work current_worker; +#define USB_CUR_STEP 20000 /* 20mA at a time */ +#define USB_MIN_VOLT 4750000 /* 4.75V */ +#define USB_CUR_DELAY msecs_to_jiffies(100) +#define USB_MAX_CURRENT 1700000 /* TWL4030 caps at 1.7A */ + + unsigned long event; +}; + +/* strings for 'usb_mode' values */ +static char *modes[] = { "off", "auto", "continuous" }; + +/* + * clear and set bits on an given register on a given module + */ +static int twl4030_clear_set(u8 mod_no, u8 clear, u8 set, u8 reg) +{ + u8 val = 0; + int ret; + + ret = twl_i2c_read_u8(mod_no, &val, reg); + if (ret) + return ret; + + val &= ~clear; + val |= set; + + return twl_i2c_write_u8(mod_no, val, reg); +} + +static int twl4030_bci_read(u8 reg, u8 *val) +{ + return twl_i2c_read_u8(TWL_MODULE_MAIN_CHARGE, val, reg); +} + +static int twl4030_clear_set_boot_bci(u8 clear, u8 set) +{ + return twl4030_clear_set(TWL_MODULE_PM_MASTER, clear, + TWL4030_CONFIG_DONE | TWL4030_BCIAUTOWEN | set, + TWL4030_PM_MASTER_BOOT_BCI); +} + +static int twl4030bci_read_adc_val(u8 reg) +{ + int ret, temp; + u8 val; + + /* read MSB */ + ret = twl4030_bci_read(reg + 1, &val); + if (ret) + return ret; + + temp = (int)(val & 0x03) << 8; + + /* read LSB */ + ret = twl4030_bci_read(reg, &val); + if (ret) + return ret; + + return temp | val; +} + +/* + * Check if Battery Pack was present + */ +static int twl4030_is_battery_present(struct twl4030_bci *bci) +{ + int ret; + u8 val = 0; + + /* Battery presence in Main charge? */ + ret = twl_i2c_read_u8(TWL_MODULE_MAIN_CHARGE, &val, TWL4030_BCIMFSTS3); + if (ret) + return ret; + if (val & TWL4030_BATSTSMCHG) + return 0; + + /* + * OK, It could be that bootloader did not enable main charger, + * pre-charge is h/w auto. So, Battery presence in Pre-charge? + */ + ret = twl_i2c_read_u8(TWL4030_MODULE_PRECHARGE, &val, + TWL4030_BCIMFSTS1); + if (ret) + return ret; + if (val & TWL4030_BATSTSPCHG) + return 0; + + return -ENODEV; +} + +/* + * TI provided formulas: + * CGAIN == 0: ICHG = (BCIICHG * 1.7) / (2^10 - 1) - 0.85 + * CGAIN == 1: ICHG = (BCIICHG * 3.4) / (2^10 - 1) - 1.7 + * Here we use integer approximation of: + * CGAIN == 0: val * 1.6618 - 0.85 * 1000 + * CGAIN == 1: (val * 1.6618 - 0.85 * 1000) * 2 + */ +/* + * convert twl register value for currents into uA + */ +static int regval2ua(int regval, bool cgain) +{ + if (cgain) + return (regval * 16618 - 8500 * 1000) / 5; + else + return (regval * 16618 - 8500 * 1000) / 10; +} + +/* + * convert uA currents into twl register value + */ +static int ua2regval(int ua, bool cgain) +{ + int ret; + if (cgain) + ua /= 2; + ret = (ua * 10 + 8500 * 1000) / 16618; + /* rounding problems */ + if (ret < 512) + ret = 512; + return ret; +} + +static int twl4030_charger_update_current(struct twl4030_bci *bci) +{ + int status; + int cur; + unsigned reg, cur_reg; + u8 bcictl1, oldreg, fullreg; + bool cgain = false; + u8 boot_bci; + + /* + * If AC (Accessory Charger) voltage exceeds 4.5V (MADC 11) + * and AC is enabled, set current for 'ac' + */ + if (ac_available(bci->channel_vac)) { + cur = bci->ac_cur; + bci->ac_is_active = true; + } else { + cur = bci->usb_cur; + bci->ac_is_active = false; + if (cur > bci->usb_cur_target) { + cur = bci->usb_cur_target; + bci->usb_cur = cur; + } + if (cur < bci->usb_cur_target) + schedule_delayed_work(&bci->current_worker, USB_CUR_DELAY); + } + + /* First, check thresholds and see if cgain is needed */ + if (bci->ichg_eoc >= 200000) + cgain = true; + if (bci->ichg_lo >= 400000) + cgain = true; + if (bci->ichg_hi >= 820000) + cgain = true; + if (cur > 852000) + cgain = true; + + status = twl4030_bci_read(TWL4030_BCICTL1, &bcictl1); + if (status < 0) + return status; + if (twl_i2c_read_u8(TWL_MODULE_PM_MASTER, &boot_bci, + TWL4030_PM_MASTER_BOOT_BCI) < 0) + boot_bci = 0; + boot_bci &= 7; + + if ((!!cgain) != !!(bcictl1 & TWL4030_CGAIN)) + /* Need to turn for charging while we change the + * CGAIN bit. Leave it off while everything is + * updated. + */ + twl4030_clear_set_boot_bci(boot_bci, 0); + + /* + * For ichg_eoc, the hardware only supports reg values matching + * 100XXXX000, and requires the XXXX be stored in the high nibble + * of TWL4030_BCIMFTH8. + */ + reg = ua2regval(bci->ichg_eoc, cgain); + if (reg > 0x278) + reg = 0x278; + if (reg < 0x200) + reg = 0x200; + reg = (reg >> 3) & 0xf; + fullreg = reg << 4; + + /* + * For ichg_lo, reg value must match 10XXXX0000. + * XXXX is stored in low nibble of TWL4030_BCIMFTH8. + */ + reg = ua2regval(bci->ichg_lo, cgain); + if (reg > 0x2F0) + reg = 0x2F0; + if (reg < 0x200) + reg = 0x200; + reg = (reg >> 4) & 0xf; + fullreg |= reg; + + /* ichg_eoc and ichg_lo live in same register */ + status = twl4030_bci_read(TWL4030_BCIMFTH8, &oldreg); + if (status < 0) + return status; + if (oldreg != fullreg) { + status = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0xF4, + TWL4030_BCIMFKEY); + if (status < 0) + return status; + twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, + fullreg, TWL4030_BCIMFTH8); + } + + /* ichg_hi threshold must be 1XXXX01100 (I think) */ + reg = ua2regval(bci->ichg_hi, cgain); + if (reg > 0x3E0) + reg = 0x3E0; + if (reg < 0x200) + reg = 0x200; + fullreg = (reg >> 5) & 0xF; + fullreg <<= 4; + status = twl4030_bci_read(TWL4030_BCIMFTH9, &oldreg); + if (status < 0) + return status; + if ((oldreg & 0xF0) != fullreg) { + fullreg |= (oldreg & 0x0F); + status = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0xE7, + TWL4030_BCIMFKEY); + if (status < 0) + return status; + twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, + fullreg, TWL4030_BCIMFTH9); + } + + /* + * And finally, set the current. This is stored in + * two registers. + */ + reg = ua2regval(cur, cgain); + /* we have only 10 bits */ + if (reg > 0x3ff) + reg = 0x3ff; + status = twl4030_bci_read(TWL4030_BCIIREF1, &oldreg); + if (status < 0) + return status; + cur_reg = oldreg; + status = twl4030_bci_read(TWL4030_BCIIREF2, &oldreg); + if (status < 0) + return status; + cur_reg |= oldreg << 8; + if (reg != oldreg) { + /* disable write protection for one write access for + * BCIIREF */ + status = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0xE7, + TWL4030_BCIMFKEY); + if (status < 0) + return status; + status = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, + (reg & 0x100) ? 3 : 2, + TWL4030_BCIIREF2); + if (status < 0) + return status; + /* disable write protection for one write access for + * BCIIREF */ + status = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0xE7, + TWL4030_BCIMFKEY); + if (status < 0) + return status; + status = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, + reg & 0xff, + TWL4030_BCIIREF1); + } + if ((!!cgain) != !!(bcictl1 & TWL4030_CGAIN)) { + /* Flip CGAIN and re-enable charging */ + bcictl1 ^= TWL4030_CGAIN; + twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, + bcictl1, TWL4030_BCICTL1); + twl4030_clear_set_boot_bci(0, boot_bci); + } + return 0; +} + +static int twl4030_charger_get_current(void); + +static void twl4030_current_worker(struct work_struct *data) +{ + int v, curr; + int res; + struct twl4030_bci *bci = container_of(data, struct twl4030_bci, + current_worker.work); + + res = twl4030bci_read_adc_val(TWL4030_BCIVBUS); + if (res < 0) + v = 0; + else + /* BCIVBUS uses ADCIN8, 7/1023 V/step */ + v = res * 6843; + curr = twl4030_charger_get_current(); + + dev_dbg(bci->dev, "v=%d cur=%d limit=%d target=%d\n", v, curr, + bci->usb_cur, bci->usb_cur_target); + + if (v < USB_MIN_VOLT) { + /* Back up and stop adjusting. */ + bci->usb_cur -= USB_CUR_STEP; + bci->usb_cur_target = bci->usb_cur; + } else if (bci->usb_cur >= bci->usb_cur_target || + bci->usb_cur + USB_CUR_STEP > USB_MAX_CURRENT) { + /* Reached target and voltage is OK - stop */ + return; + } else { + bci->usb_cur += USB_CUR_STEP; + schedule_delayed_work(&bci->current_worker, USB_CUR_DELAY); + } + twl4030_charger_update_current(bci); +} + +/* + * Enable/Disable USB Charge functionality. + */ +static int twl4030_charger_enable_usb(struct twl4030_bci *bci, bool enable) +{ + int ret; + + if (bci->usb_mode == CHARGE_OFF) + enable = false; + if (enable && !IS_ERR_OR_NULL(bci->transceiver)) { + + twl4030_charger_update_current(bci); + + /* Need to keep phy powered */ + if (!bci->usb_enabled) { + pm_runtime_get_sync(bci->transceiver->dev); + bci->usb_enabled = 1; + } + + if (bci->usb_mode == CHARGE_AUTO) + /* forcing the field BCIAUTOUSB (BOOT_BCI[1]) to 1 */ + ret = twl4030_clear_set_boot_bci(0, TWL4030_BCIAUTOUSB); + + /* forcing USBFASTMCHG(BCIMFSTS4[2]) to 1 */ + ret = twl4030_clear_set(TWL_MODULE_MAIN_CHARGE, 0, + TWL4030_USBFASTMCHG, TWL4030_BCIMFSTS4); + if (bci->usb_mode == CHARGE_LINEAR) { + twl4030_clear_set_boot_bci(TWL4030_BCIAUTOAC|TWL4030_CVENAC, 0); + /* Watch dog key: WOVF acknowledge */ + ret = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0x33, + TWL4030_BCIWDKEY); + /* 0x24 + EKEY6: off mode */ + ret = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0x2a, + TWL4030_BCIMDKEY); + /* EKEY2: Linear charge: USB path */ + ret = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0x26, + TWL4030_BCIMDKEY); + /* WDKEY5: stop watchdog count */ + ret = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0xf3, + TWL4030_BCIWDKEY); + /* enable MFEN3 access */ + ret = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0x9c, + TWL4030_BCIMFKEY); + /* ICHGEOCEN - end-of-charge monitor (current < 80mA) + * (charging continues) + * ICHGLOWEN - current level monitor (charge continues) + * don't monitor over-current or heat save + */ + ret = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0xf0, + TWL4030_BCIMFEN3); + } + } else { + ret = twl4030_clear_set_boot_bci(TWL4030_BCIAUTOUSB, 0); + ret |= twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0x2a, + TWL4030_BCIMDKEY); + if (bci->usb_enabled) { + pm_runtime_mark_last_busy(bci->transceiver->dev); + pm_runtime_put_autosuspend(bci->transceiver->dev); + bci->usb_enabled = 0; + } + bci->usb_cur = 0; + } + + return ret; +} + +/* + * Enable/Disable AC Charge funtionality. + */ +static int twl4030_charger_enable_ac(struct twl4030_bci *bci, bool enable) +{ + int ret; + + if (bci->ac_mode == CHARGE_OFF) + enable = false; + + if (enable) + ret = twl4030_clear_set_boot_bci(0, TWL4030_BCIAUTOAC); + else + ret = twl4030_clear_set_boot_bci(TWL4030_BCIAUTOAC, 0); + + return ret; +} + +/* + * Enable/Disable charging of Backup Battery. + */ +static int twl4030_charger_enable_backup(int uvolt, int uamp) +{ + int ret; + u8 flags; + + if (uvolt < 2500000 || + uamp < 25) { + /* disable charging of backup battery */ + ret = twl4030_clear_set(TWL_MODULE_PM_RECEIVER, + TWL4030_BBCHEN, 0, TWL4030_BB_CFG); + return ret; + } + + flags = TWL4030_BBCHEN; + if (uvolt >= 3200000) + flags |= TWL4030_BBSEL_3V2; + else if (uvolt >= 3100000) + flags |= TWL4030_BBSEL_3V1; + else if (uvolt >= 3000000) + flags |= TWL4030_BBSEL_3V0; + else + flags |= TWL4030_BBSEL_2V5; + + if (uamp >= 1000) + flags |= TWL4030_BBISEL_1000uA; + else if (uamp >= 500) + flags |= TWL4030_BBISEL_500uA; + else if (uamp >= 150) + flags |= TWL4030_BBISEL_150uA; + else + flags |= TWL4030_BBISEL_25uA; + + ret = twl4030_clear_set(TWL_MODULE_PM_RECEIVER, + TWL4030_BBSEL_MASK | TWL4030_BBISEL_MASK, + flags, + TWL4030_BB_CFG); + + return ret; +} + +/* + * TWL4030 CHG_PRES (AC charger presence) events + */ +static irqreturn_t twl4030_charger_interrupt(int irq, void *arg) +{ + struct twl4030_bci *bci = arg; + + dev_dbg(bci->dev, "CHG_PRES irq\n"); + /* reset current on each 'plug' event */ + bci->ac_cur = 500000; + twl4030_charger_update_current(bci); + power_supply_changed(bci->ac); + power_supply_changed(bci->usb); + + return IRQ_HANDLED; +} + +/* + * TWL4030 BCI monitoring events + */ +static irqreturn_t twl4030_bci_interrupt(int irq, void *arg) +{ + struct twl4030_bci *bci = arg; + u8 irqs1, irqs2; + int ret; + + ret = twl_i2c_read_u8(TWL4030_MODULE_INTERRUPTS, &irqs1, + TWL4030_INTERRUPTS_BCIISR1A); + if (ret < 0) + return IRQ_HANDLED; + + ret = twl_i2c_read_u8(TWL4030_MODULE_INTERRUPTS, &irqs2, + TWL4030_INTERRUPTS_BCIISR2A); + if (ret < 0) + return IRQ_HANDLED; + + dev_dbg(bci->dev, "BCI irq %02x %02x\n", irqs2, irqs1); + + if (irqs1 & (TWL4030_ICHGLOW | TWL4030_ICHGEOC)) { + /* charger state change, inform the core */ + power_supply_changed(bci->ac); + power_supply_changed(bci->usb); + } + twl4030_charger_update_current(bci); + + /* various monitoring events, for now we just log them here */ + if (irqs1 & (TWL4030_TBATOR2 | TWL4030_TBATOR1)) + dev_warn(bci->dev, "battery temperature out of range\n"); + + if (irqs1 & TWL4030_BATSTS) + dev_crit(bci->dev, "battery disconnected\n"); + + if (irqs2 & TWL4030_VBATOV) + dev_crit(bci->dev, "VBAT overvoltage\n"); + + if (irqs2 & TWL4030_VBUSOV) + dev_crit(bci->dev, "VBUS overvoltage\n"); + + if (irqs2 & TWL4030_ACCHGOV) + dev_crit(bci->dev, "Ac charger overvoltage\n"); + + return IRQ_HANDLED; +} + +/* + * Provide "max_current" attribute in sysfs. + */ +static ssize_t +twl4030_bci_max_current_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t n) +{ + struct twl4030_bci *bci = dev_get_drvdata(dev->parent); + int cur = 0; + int status = 0; + status = kstrtoint(buf, 10, &cur); + if (status) + return status; + if (cur < 0) + return -EINVAL; + if (dev == &bci->ac->dev) + bci->ac_cur = cur; + else + bci->usb_cur_target = cur; + + twl4030_charger_update_current(bci); + return n; +} + +/* + * sysfs max_current show + */ +static ssize_t twl4030_bci_max_current_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int status = 0; + int cur = -1; + u8 bcictl1; + struct twl4030_bci *bci = dev_get_drvdata(dev->parent); + + if (dev == &bci->ac->dev) { + if (!bci->ac_is_active) + cur = bci->ac_cur; + } else { + if (bci->ac_is_active) + cur = bci->usb_cur_target; + } + if (cur < 0) { + cur = twl4030bci_read_adc_val(TWL4030_BCIIREF1); + if (cur < 0) + return cur; + status = twl4030_bci_read(TWL4030_BCICTL1, &bcictl1); + if (status < 0) + return status; + cur = regval2ua(cur, bcictl1 & TWL4030_CGAIN); + } + return scnprintf(buf, PAGE_SIZE, "%u\n", cur); +} + +static DEVICE_ATTR(max_current, 0644, twl4030_bci_max_current_show, + twl4030_bci_max_current_store); + +static void twl4030_bci_usb_work(struct work_struct *data) +{ + struct twl4030_bci *bci = container_of(data, struct twl4030_bci, work); + + switch (bci->event) { + case USB_EVENT_VBUS: + case USB_EVENT_CHARGER: + twl4030_charger_enable_usb(bci, true); + break; + case USB_EVENT_NONE: + twl4030_charger_enable_usb(bci, false); + break; + } +} + +static int twl4030_bci_usb_ncb(struct notifier_block *nb, unsigned long val, + void *priv) +{ + struct twl4030_bci *bci = container_of(nb, struct twl4030_bci, usb_nb); + + dev_dbg(bci->dev, "OTG notify %lu\n", val); + + /* reset current on each 'plug' event */ + if (allow_usb) + bci->usb_cur_target = 500000; + else + bci->usb_cur_target = 100000; + + bci->event = val; + schedule_work(&bci->work); + + return NOTIFY_OK; +} + +/* + * sysfs charger enabled store + */ +static ssize_t +twl4030_bci_mode_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t n) +{ + struct twl4030_bci *bci = dev_get_drvdata(dev->parent); + int mode; + int status; + + if (sysfs_streq(buf, modes[0])) + mode = 0; + else if (sysfs_streq(buf, modes[1])) + mode = 1; + else if (sysfs_streq(buf, modes[2])) + mode = 2; + else + return -EINVAL; + if (dev == &bci->ac->dev) { + if (mode == 2) + return -EINVAL; + twl4030_charger_enable_ac(bci, false); + bci->ac_mode = mode; + status = twl4030_charger_enable_ac(bci, true); + } else { + twl4030_charger_enable_usb(bci, false); + bci->usb_mode = mode; + status = twl4030_charger_enable_usb(bci, true); + } + return (status == 0) ? n : status; +} + +/* + * sysfs charger enabled show + */ +static ssize_t +twl4030_bci_mode_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct twl4030_bci *bci = dev_get_drvdata(dev->parent); + int len = 0; + int i; + int mode = bci->usb_mode; + + if (dev == &bci->ac->dev) + mode = bci->ac_mode; + + for (i = 0; i < ARRAY_SIZE(modes); i++) + if (mode == i) + len += snprintf(buf+len, PAGE_SIZE-len, + "[%s] ", modes[i]); + else + len += snprintf(buf+len, PAGE_SIZE-len, + "%s ", modes[i]); + buf[len-1] = '\n'; + return len; +} +static DEVICE_ATTR(mode, 0644, twl4030_bci_mode_show, + twl4030_bci_mode_store); + +static int twl4030_charger_get_current(void) +{ + int curr; + int ret; + u8 bcictl1; + + curr = twl4030bci_read_adc_val(TWL4030_BCIICHG); + if (curr < 0) + return curr; + + ret = twl4030_bci_read(TWL4030_BCICTL1, &bcictl1); + if (ret) + return ret; + + return regval2ua(curr, bcictl1 & TWL4030_CGAIN); +} + +/* + * Returns the main charge FSM state + * Or < 0 on failure. + */ +static int twl4030bci_state(struct twl4030_bci *bci) +{ + int ret; + u8 state; + + ret = twl4030_bci_read(TWL4030_BCIMSTATEC, &state); + if (ret) { + pr_err("twl4030_bci: error reading BCIMSTATEC\n"); + return ret; + } + + dev_dbg(bci->dev, "state: %02x\n", state); + + return state; +} + +static int twl4030_bci_state_to_status(int state) +{ + state &= TWL4030_MSTATEC_MASK; + if (TWL4030_MSTATEC_QUICK1 <= state && state <= TWL4030_MSTATEC_QUICK7) + return POWER_SUPPLY_STATUS_CHARGING; + else if (TWL4030_MSTATEC_COMPLETE1 <= state && + state <= TWL4030_MSTATEC_COMPLETE4) + return POWER_SUPPLY_STATUS_FULL; + else + return POWER_SUPPLY_STATUS_NOT_CHARGING; +} + +static int twl4030_bci_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct twl4030_bci *bci = dev_get_drvdata(psy->dev.parent); + int is_charging; + int state; + int ret; + + state = twl4030bci_state(bci); + if (state < 0) + return state; + + if (psy->desc->type == POWER_SUPPLY_TYPE_USB) + is_charging = state & TWL4030_MSTATEC_USB; + else + is_charging = state & TWL4030_MSTATEC_AC; + if (!is_charging) { + u8 s; + twl4030_bci_read(TWL4030_BCIMDEN, &s); + if (psy->desc->type == POWER_SUPPLY_TYPE_USB) + is_charging = s & 1; + else + is_charging = s & 2; + if (is_charging) + /* A little white lie */ + state = TWL4030_MSTATEC_QUICK1; + } + + switch (psp) { + case POWER_SUPPLY_PROP_STATUS: + if (is_charging) + val->intval = twl4030_bci_state_to_status(state); + else + val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; + break; + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + /* charging must be active for meaningful result */ + if (!is_charging) + return -ENODATA; + if (psy->desc->type == POWER_SUPPLY_TYPE_USB) { + ret = twl4030bci_read_adc_val(TWL4030_BCIVBUS); + if (ret < 0) + return ret; + /* BCIVBUS uses ADCIN8, 7/1023 V/step */ + val->intval = ret * 6843; + } else { + ret = twl4030bci_read_adc_val(TWL4030_BCIVAC); + if (ret < 0) + return ret; + /* BCIVAC uses ADCIN11, 10/1023 V/step */ + val->intval = ret * 9775; + } + break; + case POWER_SUPPLY_PROP_CURRENT_NOW: + if (!is_charging) + return -ENODATA; + /* current measurement is shared between AC and USB */ + ret = twl4030_charger_get_current(); + if (ret < 0) + return ret; + val->intval = ret; + break; + case POWER_SUPPLY_PROP_ONLINE: + val->intval = is_charging && + twl4030_bci_state_to_status(state) != + POWER_SUPPLY_STATUS_NOT_CHARGING; + break; + default: + return -EINVAL; + } + + return 0; +} + +static enum power_supply_property twl4030_charger_props[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_ONLINE, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_CURRENT_NOW, +}; + +#ifdef CONFIG_OF +static const struct twl4030_bci_platform_data * +twl4030_bci_parse_dt(struct device *dev) +{ + struct device_node *np = dev->of_node; + struct twl4030_bci_platform_data *pdata; + u32 num; + + if (!np) + return NULL; + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return pdata; + + if (of_property_read_u32(np, "ti,bb-uvolt", &num) == 0) + pdata->bb_uvolt = num; + if (of_property_read_u32(np, "ti,bb-uamp", &num) == 0) + pdata->bb_uamp = num; + return pdata; +} +#else +static inline const struct twl4030_bci_platform_data * +twl4030_bci_parse_dt(struct device *dev) +{ + return NULL; +} +#endif + +static const struct power_supply_desc twl4030_bci_ac_desc = { + .name = "twl4030_ac", + .type = POWER_SUPPLY_TYPE_MAINS, + .properties = twl4030_charger_props, + .num_properties = ARRAY_SIZE(twl4030_charger_props), + .get_property = twl4030_bci_get_property, +}; + +static const struct power_supply_desc twl4030_bci_usb_desc = { + .name = "twl4030_usb", + .type = POWER_SUPPLY_TYPE_USB, + .properties = twl4030_charger_props, + .num_properties = ARRAY_SIZE(twl4030_charger_props), + .get_property = twl4030_bci_get_property, +}; + +static int twl4030_bci_probe(struct platform_device *pdev) +{ + struct twl4030_bci *bci; + const struct twl4030_bci_platform_data *pdata = pdev->dev.platform_data; + int ret; + u32 reg; + + bci = devm_kzalloc(&pdev->dev, sizeof(*bci), GFP_KERNEL); + if (bci == NULL) + return -ENOMEM; + + if (!pdata) + pdata = twl4030_bci_parse_dt(&pdev->dev); + + bci->ichg_eoc = 80100; /* Stop charging when current drops to here */ + bci->ichg_lo = 241000; /* Low threshold */ + bci->ichg_hi = 500000; /* High threshold */ + bci->ac_cur = 500000; /* 500mA */ + if (allow_usb) + bci->usb_cur_target = 500000; /* 500mA */ + else + bci->usb_cur_target = 100000; /* 100mA */ + bci->usb_mode = CHARGE_AUTO; + bci->ac_mode = CHARGE_AUTO; + + bci->dev = &pdev->dev; + bci->irq_chg = platform_get_irq(pdev, 0); + bci->irq_bci = platform_get_irq(pdev, 1); + + /* Only proceed further *IF* battery is physically present */ + ret = twl4030_is_battery_present(bci); + if (ret) { + dev_crit(&pdev->dev, "Battery was not detected:%d\n", ret); + return ret; + } + + platform_set_drvdata(pdev, bci); + + bci->ac = devm_power_supply_register(&pdev->dev, &twl4030_bci_ac_desc, + NULL); + if (IS_ERR(bci->ac)) { + ret = PTR_ERR(bci->ac); + dev_err(&pdev->dev, "failed to register ac: %d\n", ret); + return ret; + } + + bci->usb = devm_power_supply_register(&pdev->dev, &twl4030_bci_usb_desc, + NULL); + if (IS_ERR(bci->usb)) { + ret = PTR_ERR(bci->usb); + dev_err(&pdev->dev, "failed to register usb: %d\n", ret); + return ret; + } + + ret = devm_request_threaded_irq(&pdev->dev, bci->irq_chg, NULL, + twl4030_charger_interrupt, IRQF_ONESHOT, pdev->name, + bci); + if (ret < 0) { + dev_err(&pdev->dev, "could not request irq %d, status %d\n", + bci->irq_chg, ret); + return ret; + } + + ret = devm_request_threaded_irq(&pdev->dev, bci->irq_bci, NULL, + twl4030_bci_interrupt, IRQF_ONESHOT, pdev->name, bci); + if (ret < 0) { + dev_err(&pdev->dev, "could not request irq %d, status %d\n", + bci->irq_bci, ret); + return ret; + } + + bci->channel_vac = iio_channel_get(&pdev->dev, "vac"); + if (IS_ERR(bci->channel_vac)) { + bci->channel_vac = NULL; + dev_warn(&pdev->dev, "could not request vac iio channel"); + } + + INIT_WORK(&bci->work, twl4030_bci_usb_work); + INIT_DELAYED_WORK(&bci->current_worker, twl4030_current_worker); + + bci->usb_nb.notifier_call = twl4030_bci_usb_ncb; + if (bci->dev->of_node) { + struct device_node *phynode; + + phynode = of_find_compatible_node(bci->dev->of_node->parent, + NULL, "ti,twl4030-usb"); + if (phynode) + bci->transceiver = devm_usb_get_phy_by_node( + bci->dev, phynode, &bci->usb_nb); + } + + /* Enable interrupts now. */ + reg = ~(u32)(TWL4030_ICHGLOW | TWL4030_ICHGEOC | TWL4030_TBATOR2 | + TWL4030_TBATOR1 | TWL4030_BATSTS); + ret = twl_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, reg, + TWL4030_INTERRUPTS_BCIIMR1A); + if (ret < 0) { + dev_err(&pdev->dev, "failed to unmask interrupts: %d\n", ret); + goto fail; + } + + reg = ~(u32)(TWL4030_VBATOV | TWL4030_VBUSOV | TWL4030_ACCHGOV); + ret = twl_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, reg, + TWL4030_INTERRUPTS_BCIIMR2A); + if (ret < 0) + dev_warn(&pdev->dev, "failed to unmask interrupts: %d\n", ret); + + twl4030_charger_update_current(bci); + if (device_create_file(&bci->usb->dev, &dev_attr_max_current)) + dev_warn(&pdev->dev, "could not create sysfs file\n"); + if (device_create_file(&bci->usb->dev, &dev_attr_mode)) + dev_warn(&pdev->dev, "could not create sysfs file\n"); + if (device_create_file(&bci->ac->dev, &dev_attr_mode)) + dev_warn(&pdev->dev, "could not create sysfs file\n"); + if (device_create_file(&bci->ac->dev, &dev_attr_max_current)) + dev_warn(&pdev->dev, "could not create sysfs file\n"); + + twl4030_charger_enable_ac(bci, true); + if (!IS_ERR_OR_NULL(bci->transceiver)) + twl4030_bci_usb_ncb(&bci->usb_nb, + bci->transceiver->last_event, + NULL); + else + twl4030_charger_enable_usb(bci, false); + if (pdata) + twl4030_charger_enable_backup(pdata->bb_uvolt, + pdata->bb_uamp); + else + twl4030_charger_enable_backup(0, 0); + + return 0; +fail: + iio_channel_release(bci->channel_vac); + + return ret; +} + +static int __exit twl4030_bci_remove(struct platform_device *pdev) +{ + struct twl4030_bci *bci = platform_get_drvdata(pdev); + + twl4030_charger_enable_ac(bci, false); + twl4030_charger_enable_usb(bci, false); + twl4030_charger_enable_backup(0, 0); + + iio_channel_release(bci->channel_vac); + + device_remove_file(&bci->usb->dev, &dev_attr_max_current); + device_remove_file(&bci->usb->dev, &dev_attr_mode); + device_remove_file(&bci->ac->dev, &dev_attr_max_current); + device_remove_file(&bci->ac->dev, &dev_attr_mode); + /* mask interrupts */ + twl_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, 0xff, + TWL4030_INTERRUPTS_BCIIMR1A); + twl_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, 0xff, + TWL4030_INTERRUPTS_BCIIMR2A); + + return 0; +} + +static const struct of_device_id twl_bci_of_match[] = { + {.compatible = "ti,twl4030-bci", }, + { } +}; +MODULE_DEVICE_TABLE(of, twl_bci_of_match); + +static struct platform_driver twl4030_bci_driver = { + .probe = twl4030_bci_probe, + .driver = { + .name = "twl4030_bci", + .of_match_table = of_match_ptr(twl_bci_of_match), + }, + .remove = __exit_p(twl4030_bci_remove), +}; +module_platform_driver(twl4030_bci_driver); + +MODULE_AUTHOR("Gražvydas Ignotas"); +MODULE_DESCRIPTION("TWL4030 Battery Charger Interface driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:twl4030_bci"); |