summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/lpfc/lpfc_bsg.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/lpfc/lpfc_bsg.c')
-rw-r--r--drivers/scsi/lpfc/lpfc_bsg.c123
1 files changed, 99 insertions, 24 deletions
diff --git a/drivers/scsi/lpfc/lpfc_bsg.c b/drivers/scsi/lpfc/lpfc_bsg.c
index f2494d3b365c..b0202bc0aa62 100644
--- a/drivers/scsi/lpfc/lpfc_bsg.c
+++ b/drivers/scsi/lpfc/lpfc_bsg.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2017-2018 Broadcom. All Rights Reserved. The term *
+ * Copyright (C) 2017-2019 Broadcom. All Rights Reserved. The term *
* “Broadcom” refers to Broadcom Inc. and/or its subsidiaries. *
* Copyright (C) 2009-2015 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
@@ -1968,14 +1968,17 @@ link_diag_state_set_out:
}
/**
- * lpfc_sli4_bsg_set_internal_loopback - set sli4 internal loopback diagnostic
+ * lpfc_sli4_bsg_set_loopback_mode - set sli4 internal loopback diagnostic
* @phba: Pointer to HBA context object.
+ * @mode: loopback mode to set
+ * @link_no: link number for loopback mode to set
*
* This function is responsible for issuing a sli4 mailbox command for setting
- * up internal loopback diagnostic.
+ * up loopback diagnostic for a link.
*/
static int
-lpfc_sli4_bsg_set_internal_loopback(struct lpfc_hba *phba)
+lpfc_sli4_bsg_set_loopback_mode(struct lpfc_hba *phba, int mode,
+ uint32_t link_no)
{
LPFC_MBOXQ_t *pmboxq;
uint32_t req_len, alloc_len;
@@ -1996,11 +1999,19 @@ lpfc_sli4_bsg_set_internal_loopback(struct lpfc_hba *phba)
}
link_diag_loopback = &pmboxq->u.mqe.un.link_diag_loopback;
bf_set(lpfc_mbx_set_diag_state_link_num,
- &link_diag_loopback->u.req, phba->sli4_hba.lnk_info.lnk_no);
- bf_set(lpfc_mbx_set_diag_state_link_type,
- &link_diag_loopback->u.req, phba->sli4_hba.lnk_info.lnk_tp);
+ &link_diag_loopback->u.req, link_no);
+
+ if (phba->sli4_hba.conf_trunk & (1 << link_no)) {
+ bf_set(lpfc_mbx_set_diag_state_link_type,
+ &link_diag_loopback->u.req, LPFC_LNK_FC_TRUNKED);
+ } else {
+ bf_set(lpfc_mbx_set_diag_state_link_type,
+ &link_diag_loopback->u.req,
+ phba->sli4_hba.lnk_info.lnk_tp);
+ }
+
bf_set(lpfc_mbx_set_diag_lpbk_type, &link_diag_loopback->u.req,
- LPFC_DIAG_LOOPBACK_TYPE_INTERNAL);
+ mode);
mbxstatus = lpfc_sli_issue_mbox_wait(phba, pmboxq, LPFC_MBOX_TMO);
if ((mbxstatus != MBX_SUCCESS) || (pmboxq->u.mb.mbxStatus)) {
@@ -2054,7 +2065,7 @@ lpfc_sli4_bsg_diag_loopback_mode(struct lpfc_hba *phba, struct bsg_job *job)
struct fc_bsg_request *bsg_request = job->request;
struct fc_bsg_reply *bsg_reply = job->reply;
struct diag_mode_set *loopback_mode;
- uint32_t link_flags, timeout;
+ uint32_t link_flags, timeout, link_no;
int i, rc = 0;
/* no data to return just the return code */
@@ -2069,12 +2080,39 @@ lpfc_sli4_bsg_diag_loopback_mode(struct lpfc_hba *phba, struct bsg_job *job)
(int)(sizeof(struct fc_bsg_request) +
sizeof(struct diag_mode_set)));
rc = -EINVAL;
- goto job_error;
+ goto job_done;
+ }
+
+ loopback_mode = (struct diag_mode_set *)
+ bsg_request->rqst_data.h_vendor.vendor_cmd;
+ link_flags = loopback_mode->type;
+ timeout = loopback_mode->timeout * 100;
+
+ if (loopback_mode->physical_link == -1)
+ link_no = phba->sli4_hba.lnk_info.lnk_no;
+ else
+ link_no = loopback_mode->physical_link;
+
+ if (link_flags == DISABLE_LOOP_BACK) {
+ rc = lpfc_sli4_bsg_set_loopback_mode(phba,
+ LPFC_DIAG_LOOPBACK_TYPE_DISABLE,
+ link_no);
+ if (!rc) {
+ /* Unset the need disable bit */
+ phba->sli4_hba.conf_trunk &= ~((1 << link_no) << 4);
+ }
+ goto job_done;
+ } else {
+ /* Check if we need to disable the loopback state */
+ if (phba->sli4_hba.conf_trunk & ((1 << link_no) << 4)) {
+ rc = -EPERM;
+ goto job_done;
+ }
}
rc = lpfc_bsg_diag_mode_enter(phba);
if (rc)
- goto job_error;
+ goto job_done;
/* indicate we are in loobpack diagnostic mode */
spin_lock_irq(&phba->hbalock);
@@ -2084,15 +2122,11 @@ lpfc_sli4_bsg_diag_loopback_mode(struct lpfc_hba *phba, struct bsg_job *job)
/* reset port to start frome scratch */
rc = lpfc_selective_reset(phba);
if (rc)
- goto job_error;
+ goto job_done;
/* bring the link to diagnostic mode */
lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC,
"3129 Bring link to diagnostic state.\n");
- loopback_mode = (struct diag_mode_set *)
- bsg_request->rqst_data.h_vendor.vendor_cmd;
- link_flags = loopback_mode->type;
- timeout = loopback_mode->timeout * 100;
rc = lpfc_sli4_bsg_set_link_diag_state(phba, 1);
if (rc) {
@@ -2120,13 +2154,54 @@ lpfc_sli4_bsg_diag_loopback_mode(struct lpfc_hba *phba, struct bsg_job *job)
lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC,
"3132 Set up loopback mode:x%x\n", link_flags);
- if (link_flags == INTERNAL_LOOP_BACK)
- rc = lpfc_sli4_bsg_set_internal_loopback(phba);
- else if (link_flags == EXTERNAL_LOOP_BACK)
- rc = lpfc_hba_init_link_fc_topology(phba,
- FLAGS_TOPOLOGY_MODE_PT_PT,
- MBX_NOWAIT);
- else {
+ switch (link_flags) {
+ case INTERNAL_LOOP_BACK:
+ if (phba->sli4_hba.conf_trunk & (1 << link_no)) {
+ rc = lpfc_sli4_bsg_set_loopback_mode(phba,
+ LPFC_DIAG_LOOPBACK_TYPE_INTERNAL,
+ link_no);
+ } else {
+ /* Trunk is configured, but link is not in this trunk */
+ if (phba->sli4_hba.conf_trunk) {
+ rc = -ELNRNG;
+ goto loopback_mode_exit;
+ }
+
+ rc = lpfc_sli4_bsg_set_loopback_mode(phba,
+ LPFC_DIAG_LOOPBACK_TYPE_INTERNAL,
+ link_no);
+ }
+
+ if (!rc) {
+ /* Set the need disable bit */
+ phba->sli4_hba.conf_trunk |= (1 << link_no) << 4;
+ }
+
+ break;
+ case EXTERNAL_LOOP_BACK:
+ if (phba->sli4_hba.conf_trunk & (1 << link_no)) {
+ rc = lpfc_sli4_bsg_set_loopback_mode(phba,
+ LPFC_DIAG_LOOPBACK_TYPE_EXTERNAL_TRUNKED,
+ link_no);
+ } else {
+ /* Trunk is configured, but link is not in this trunk */
+ if (phba->sli4_hba.conf_trunk) {
+ rc = -ELNRNG;
+ goto loopback_mode_exit;
+ }
+
+ rc = lpfc_sli4_bsg_set_loopback_mode(phba,
+ LPFC_DIAG_LOOPBACK_TYPE_SERDES,
+ link_no);
+ }
+
+ if (!rc) {
+ /* Set the need disable bit */
+ phba->sli4_hba.conf_trunk |= (1 << link_no) << 4;
+ }
+
+ break;
+ default:
rc = -EINVAL;
lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC,
"3141 Loopback mode:x%x not supported\n",
@@ -2185,7 +2260,7 @@ loopback_mode_exit:
}
lpfc_bsg_diag_mode_exit(phba);
-job_error:
+job_done:
/* make error code available to userspace */
bsg_reply->result = rc;
/* complete the job back to userspace if no error */
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-12 06:42:01 +0100