diff options
Diffstat (limited to 'drivers/scsi/mpt3sas/mpt3sas_base.h')
| -rw-r--r-- | drivers/scsi/mpt3sas/mpt3sas_base.h | 145 |
1 files changed, 133 insertions, 12 deletions
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h index bc8beb10f3fc..2def7a340616 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.h +++ b/drivers/scsi/mpt3sas/mpt3sas_base.h @@ -71,13 +71,14 @@ #include "mpt3sas_debug.h" #include "mpt3sas_trigger_diag.h" +#include "mpt3sas_trigger_pages.h" /* driver versioning info */ #define MPT3SAS_DRIVER_NAME "mpt3sas" #define MPT3SAS_AUTHOR "Avago Technologies <MPT-FusionLinux.pdl@avagotech.com>" #define MPT3SAS_DESCRIPTION "LSI MPT Fusion SAS 3.0 Device Driver" -#define MPT3SAS_DRIVER_VERSION "35.100.00.00" -#define MPT3SAS_MAJOR_VERSION 35 +#define MPT3SAS_DRIVER_VERSION "36.100.00.00" +#define MPT3SAS_MAJOR_VERSION 36 #define MPT3SAS_MINOR_VERSION 100 #define MPT3SAS_BUILD_VERSION 0 #define MPT3SAS_RELEASE_VERSION 00 @@ -93,6 +94,14 @@ /* CoreDump: Default timeout */ #define MPT3SAS_DEFAULT_COREDUMP_TIMEOUT_SECONDS (15) /*15 seconds*/ #define MPT3SAS_COREDUMP_LOOP_DONE (0xFF) +#define MPT3SAS_TIMESYNC_TIMEOUT_SECONDS (10) /* 10 seconds */ +#define MPT3SAS_TIMESYNC_UPDATE_INTERVAL (900) /* 15 minutes */ +#define MPT3SAS_TIMESYNC_UNIT_MASK (0x80) /* bit 7 */ +#define MPT3SAS_TIMESYNC_MASK (0x7F) /* 0 - 6 bits */ +#define SECONDS_PER_MIN (60) +#define SECONDS_PER_HOUR (3600) +#define MPT3SAS_COREDUMP_LOOP_DONE (0xFF) +#define MPI26_SET_IOC_PARAMETER_SYNC_TIMESTAMP (0x81) /* * Set MPT3SAS_SG_DEPTH value based on user input. @@ -405,7 +414,7 @@ struct Mpi2ManufacturingPage11_t { u16 HostTraceBufferMaxSizeKB; /* 50h */ u16 HostTraceBufferMinSizeKB; /* 52h */ u8 CoreDumpTOSec; /* 54h */ - u8 Reserved8; /* 55h */ + u8 TimeSyncInterval; /* 55h */ u16 Reserved9; /* 56h */ __le32 Reserved10; /* 58h */ }; @@ -420,6 +429,7 @@ struct Mpi2ManufacturingPage11_t { * @flags: MPT_TARGET_FLAGS_XXX flags * @deleted: target flaged for deletion * @tm_busy: target is busy with TM request. + * @port: hba port entry containing target's port number info * @sas_dev: The sas_device associated with this target * @pcie_dev: The pcie device associated with this target */ @@ -432,6 +442,7 @@ struct MPT3SAS_TARGET { u32 flags; u8 deleted; u8 tm_busy; + struct hba_port *port; struct _sas_device *sas_dev; struct _pcie_device *pcie_dev; }; @@ -534,6 +545,9 @@ struct _internal_cmd { * addition routine. * @chassis_slot: chassis slot * @is_chassis_slot_valid: chassis slot valid or not + * @port: hba port entry containing device's port number info + * @rphy: device's sas_rphy address used to identify this device structure in + * target_alloc callback function */ struct _sas_device { struct list_head list; @@ -560,6 +574,8 @@ struct _sas_device { u8 is_chassis_slot_valid; u8 connector_name[5]; struct kref refcount; + struct hba_port *port; + struct sas_rphy *rphy; }; static inline void sas_device_get(struct _sas_device *s) @@ -730,6 +746,7 @@ struct _boot_device { * @remote_identify: attached device identification * @rphy: sas transport rphy object * @port: sas transport wide/narrow port object + * @hba_port: hba port entry containing port's port number info * @phy_list: _sas_phy list objects belonging to this port */ struct _sas_port { @@ -738,6 +755,7 @@ struct _sas_port { struct sas_identify remote_identify; struct sas_rphy *rphy; struct sas_port *port; + struct hba_port *hba_port; struct list_head phy_list; }; @@ -751,6 +769,7 @@ struct _sas_port { * @handle: device handle for this phy * @attached_handle: device handle for attached device * @phy_belongs_to_port: port has been created for this phy + * @port: hba port entry containing port number info */ struct _sas_phy { struct list_head port_siblings; @@ -761,6 +780,8 @@ struct _sas_phy { u16 handle; u16 attached_handle; u8 phy_belongs_to_port; + u8 hba_vphy; + struct hba_port *port; }; /** @@ -776,6 +797,8 @@ struct _sas_phy { * @responding: used in _scsih_expander_device_mark_responding * @phy: a list of phys that make up this sas_host/expander * @sas_port_list: list of ports attached to this sas_host/expander + * @port: hba port entry containing node's port number info + * @rphy: sas_rphy object of this expander */ struct _sas_node { struct list_head list; @@ -787,11 +810,12 @@ struct _sas_node { u16 enclosure_handle; u64 enclosure_logical_id; u8 responding; + struct hba_port *port; struct _sas_phy *phy; struct list_head sas_port_list; + struct sas_rphy *rphy; }; - /** * struct _enclosure_node - enclosure information * @list: list of enclosures @@ -1009,6 +1033,46 @@ struct reply_post_struct { dma_addr_t reply_post_free_dma; }; +/** + * struct virtual_phy - vSES phy structure + * sas_address: SAS Address of vSES device + * phy_mask: vSES device's phy number + * flags: flags used to manage this structure + */ +struct virtual_phy { + struct list_head list; + u64 sas_address; + u32 phy_mask; + u8 flags; +}; + +#define MPT_VPHY_FLAG_DIRTY_PHY 0x01 + +/** + * struct hba_port - Saves each HBA's Wide/Narrow port info + * @sas_address: sas address of this wide/narrow port's attached device + * @phy_mask: HBA PHY's belonging to this port + * @port_id: port number + * @flags: hba port flags + * @vphys_mask : mask of vSES devices Phy number + * @vphys_list : list containing vSES device structures + */ +struct hba_port { + struct list_head list; + u64 sas_address; + u32 phy_mask; + u8 port_id; + u8 flags; + u32 vphys_mask; + struct list_head vphys_list; +}; + +/* hba port flags */ +#define HBA_PORT_FLAG_DIRTY_PORT 0x01 +#define HBA_PORT_FLAG_NEW_PORT 0x02 + +#define MULTIPATH_DISABLED_PORT_ID 0xFF + typedef void (*MPT3SAS_FLUSH_RUNNING_CMDS)(struct MPT3SAS_ADAPTER *ioc); /** * struct MPT3SAS_ADAPTER - per adapter struct @@ -1058,6 +1122,8 @@ typedef void (*MPT3SAS_FLUSH_RUNNING_CMDS)(struct MPT3SAS_ADAPTER *ioc); * @cpu_msix_table_sz: table size * @total_io_cnt: Gives total IO count, used to load balance the interrupts * @ioc_coredump_loop: will have non-zero value when FW is in CoreDump state + * @timestamp_update_count: Counter to fire timeSync command + * time_sync_interval: Time sync interval read from man page 11 * @high_iops_outstanding: used to load balance the interrupts * within high iops reply queues * @msix_load_balance: Enables load balancing of interrupts across @@ -1191,6 +1257,8 @@ typedef void (*MPT3SAS_FLUSH_RUNNING_CMDS)(struct MPT3SAS_ADAPTER *ioc); * which ensures the syncrhonization between cli/sysfs_show path. * @atomic_desc_capable: Atomic Request Descriptor support. * @GET_MSIX_INDEX: Get the msix index of high iops queues. + * @multipath_on_hba: flag to determine multipath on hba is enabled or not + * @port_table_list: list containing HBA's wide/narrow port's info */ struct MPT3SAS_ADAPTER { struct list_head list; @@ -1251,6 +1319,8 @@ struct MPT3SAS_ADAPTER { MPT3SAS_FLUSH_RUNNING_CMDS schedule_dead_ioc_flush_running_cmds; u32 non_operational_loop; u8 ioc_coredump_loop; + u32 timestamp_update_count; + u32 time_sync_interval; atomic64_t total_io_cnt; atomic64_t high_iops_outstanding; bool msix_load_balance; @@ -1472,6 +1542,7 @@ struct MPT3SAS_ADAPTER { struct SL_WH_EVENT_TRIGGERS_T diag_trigger_event; struct SL_WH_SCSI_TRIGGERS_T diag_trigger_scsi; struct SL_WH_MPI_TRIGGERS_T diag_trigger_mpi; + u8 supports_trigger_pages; void *device_remove_in_progress; u16 device_remove_in_progress_sz; u8 is_gen35_ioc; @@ -1483,6 +1554,9 @@ struct MPT3SAS_ADAPTER { PUT_SMID_IO_FP_HIP put_smid_hi_priority; PUT_SMID_DEFAULT put_smid_default; GET_MSIX_INDEX get_msix_index_for_smlio; + + u8 multipath_on_hba; + struct list_head port_table_list; }; struct mpt3sas_debugfs_buffer { @@ -1619,20 +1693,27 @@ int mpt3sas_scsih_issue_locked_tm(struct MPT3SAS_ADAPTER *ioc, u16 handle, void mpt3sas_scsih_set_tm_flag(struct MPT3SAS_ADAPTER *ioc, u16 handle); void mpt3sas_scsih_clear_tm_flag(struct MPT3SAS_ADAPTER *ioc, u16 handle); -void mpt3sas_expander_remove(struct MPT3SAS_ADAPTER *ioc, u64 sas_address); +void mpt3sas_expander_remove(struct MPT3SAS_ADAPTER *ioc, u64 sas_address, + struct hba_port *port); void mpt3sas_device_remove_by_sas_address(struct MPT3SAS_ADAPTER *ioc, - u64 sas_address); + u64 sas_address, struct hba_port *port); u8 mpt3sas_check_for_pending_internal_cmds(struct MPT3SAS_ADAPTER *ioc, u16 smid); +struct hba_port * +mpt3sas_get_port_by_id(struct MPT3SAS_ADAPTER *ioc, u8 port, + u8 bypass_dirty_port_flag); struct _sas_node *mpt3sas_scsih_expander_find_by_handle( struct MPT3SAS_ADAPTER *ioc, u16 handle); struct _sas_node *mpt3sas_scsih_expander_find_by_sas_address( - struct MPT3SAS_ADAPTER *ioc, u64 sas_address); + struct MPT3SAS_ADAPTER *ioc, u64 sas_address, + struct hba_port *port); struct _sas_device *mpt3sas_get_sdev_by_addr( - struct MPT3SAS_ADAPTER *ioc, u64 sas_address); + struct MPT3SAS_ADAPTER *ioc, u64 sas_address, + struct hba_port *port); struct _sas_device *__mpt3sas_get_sdev_by_addr( - struct MPT3SAS_ADAPTER *ioc, u64 sas_address); + struct MPT3SAS_ADAPTER *ioc, u64 sas_address, + struct hba_port *port); struct _sas_device *mpt3sas_get_sdev_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle); struct _pcie_device *mpt3sas_get_pdev_by_handle(struct MPT3SAS_ADAPTER *ioc, @@ -1642,6 +1723,11 @@ void mpt3sas_port_enable_complete(struct MPT3SAS_ADAPTER *ioc); struct _raid_device * mpt3sas_raid_device_find_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle); void mpt3sas_scsih_change_queue_depth(struct scsi_device *sdev, int qdepth); +struct _sas_device * +__mpt3sas_get_sdev_by_rphy(struct MPT3SAS_ADAPTER *ioc, struct sas_rphy *rphy); +struct virtual_phy * +mpt3sas_get_vphy_by_phy(struct MPT3SAS_ADAPTER *ioc, + struct hba_port *port, u32 phy); /* config shared API */ u8 mpt3sas_config_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, @@ -1733,6 +1819,33 @@ int mpt3sas_config_get_volume_handle(struct MPT3SAS_ADAPTER *ioc, u16 pd_handle, u16 *volume_handle); int mpt3sas_config_get_volume_wwid(struct MPT3SAS_ADAPTER *ioc, u16 volume_handle, u64 *wwid); +int +mpt3sas_config_get_driver_trigger_pg0(struct MPT3SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage0_t *config_page); +int +mpt3sas_config_get_driver_trigger_pg1(struct MPT3SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage1_t *config_page); +int +mpt3sas_config_get_driver_trigger_pg2(struct MPT3SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage2_t *config_page); +int +mpt3sas_config_get_driver_trigger_pg3(struct MPT3SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage3_t *config_page); +int +mpt3sas_config_get_driver_trigger_pg4(struct MPT3SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage4_t *config_page); +int +mpt3sas_config_update_driver_trigger_pg1(struct MPT3SAS_ADAPTER *ioc, + struct SL_WH_MASTER_TRIGGER_T *master_tg, bool set); +int +mpt3sas_config_update_driver_trigger_pg2(struct MPT3SAS_ADAPTER *ioc, + struct SL_WH_EVENT_TRIGGERS_T *event_tg, bool set); +int +mpt3sas_config_update_driver_trigger_pg3(struct MPT3SAS_ADAPTER *ioc, + struct SL_WH_SCSI_TRIGGERS_T *scsi_tg, bool set); +int +mpt3sas_config_update_driver_trigger_pg4(struct MPT3SAS_ADAPTER *ioc, + struct SL_WH_MPI_TRIGGERS_T *mpi_tg, bool set); /* ctl shared API */ extern struct device_attribute *mpt3sas_host_attrs[]; @@ -1759,18 +1872,26 @@ extern struct scsi_transport_template *mpt3sas_transport_template; u8 mpt3sas_transport_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply); struct _sas_port *mpt3sas_transport_port_add(struct MPT3SAS_ADAPTER *ioc, - u16 handle, u64 sas_address); + u16 handle, u64 sas_address, struct hba_port *port); void mpt3sas_transport_port_remove(struct MPT3SAS_ADAPTER *ioc, u64 sas_address, - u64 sas_address_parent); + u64 sas_address_parent, struct hba_port *port); int mpt3sas_transport_add_host_phy(struct MPT3SAS_ADAPTER *ioc, struct _sas_phy *mpt3sas_phy, Mpi2SasPhyPage0_t phy_pg0, struct device *parent_dev); int mpt3sas_transport_add_expander_phy(struct MPT3SAS_ADAPTER *ioc, struct _sas_phy *mpt3sas_phy, Mpi2ExpanderPage1_t expander_pg1, struct device *parent_dev); void mpt3sas_transport_update_links(struct MPT3SAS_ADAPTER *ioc, - u64 sas_address, u16 handle, u8 phy_number, u8 link_rate); + u64 sas_address, u16 handle, u8 phy_number, u8 link_rate, + struct hba_port *port); extern struct sas_function_template mpt3sas_transport_functions; extern struct scsi_transport_template *mpt3sas_transport_template; +void +mpt3sas_transport_del_phy_from_an_existing_port(struct MPT3SAS_ADAPTER *ioc, + struct _sas_node *sas_node, struct _sas_phy *mpt3sas_phy); +void +mpt3sas_transport_add_phy_to_an_existing_port(struct MPT3SAS_ADAPTER *ioc, + struct _sas_node *sas_node, struct _sas_phy *mpt3sas_phy, + u64 sas_address, struct hba_port *port); /* trigger data externs */ void mpt3sas_send_trigger_data_event(struct MPT3SAS_ADAPTER *ioc, struct SL_WH_TRIGGERS_EVENT_DATA_T *event_data); |