summaryrefslogtreecommitdiffstats
path: root/drivers/usb/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/serial')
-rw-r--r--drivers/usb/serial/cp210x.c84
-rw-r--r--drivers/usb/serial/ftdi_sio.c4
-rw-r--r--drivers/usb/serial/ftdi_sio_ids.h8
-rw-r--r--drivers/usb/serial/omninet.c8
-rw-r--r--drivers/usb/serial/option.c4
-rw-r--r--drivers/usb/serial/pl2303.c1
-rw-r--r--drivers/usb/serial/pl2303.h1
-rw-r--r--drivers/usb/serial/quatech2.c6
-rw-r--r--drivers/usb/serial/ti_usb_3410_5052.c3
9 files changed, 107 insertions, 12 deletions
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index ee595d1bea0a..fcb812bc832c 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -252,9 +252,11 @@ struct cp210x_serial_private {
u8 gpio_input;
#endif
u8 partnum;
+ u32 fw_version;
speed_t min_speed;
speed_t max_speed;
bool use_actual_rate;
+ bool no_flow_control;
};
enum cp210x_event_state {
@@ -398,6 +400,7 @@ struct cp210x_special_chars {
/* CP210X_VENDOR_SPECIFIC values */
#define CP210X_READ_2NCONFIG 0x000E
+#define CP210X_GET_FW_VER_2N 0x0010
#define CP210X_READ_LATCH 0x00C2
#define CP210X_GET_PARTNUM 0x370B
#define CP210X_GET_PORTCONFIG 0x370C
@@ -537,6 +540,12 @@ struct cp210x_single_port_config {
#define CP210X_2NCONFIG_GPIO_RSTLATCH_IDX 587
#define CP210X_2NCONFIG_GPIO_CONTROL_IDX 600
+/* CP2102N QFN20 port configuration values */
+#define CP2102N_QFN20_GPIO2_TXLED_MODE BIT(2)
+#define CP2102N_QFN20_GPIO3_RXLED_MODE BIT(3)
+#define CP2102N_QFN20_GPIO1_RS485_MODE BIT(4)
+#define CP2102N_QFN20_GPIO0_CLK_MODE BIT(6)
+
/* CP210X_VENDOR_SPECIFIC, CP210X_WRITE_LATCH call writes these 0x2 bytes. */
struct cp210x_gpio_write {
u8 mask;
@@ -1122,6 +1131,7 @@ static bool cp210x_termios_change(const struct ktermios *a, const struct ktermio
static void cp210x_set_flow_control(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old_termios)
{
+ struct cp210x_serial_private *priv = usb_get_serial_data(port->serial);
struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
struct cp210x_special_chars chars;
struct cp210x_flow_ctl flow_ctl;
@@ -1129,6 +1139,15 @@ static void cp210x_set_flow_control(struct tty_struct *tty,
u32 ctl_hs;
int ret;
+ /*
+ * Some CP2102N interpret ulXonLimit as ulFlowReplace (erratum
+ * CP2102N_E104). Report back that flow control is not supported.
+ */
+ if (priv->no_flow_control) {
+ tty->termios.c_cflag &= ~CRTSCTS;
+ tty->termios.c_iflag &= ~(IXON | IXOFF);
+ }
+
if (old_termios &&
C_CRTSCTS(tty) == (old_termios->c_cflag & CRTSCTS) &&
I_IXON(tty) == (old_termios->c_iflag & IXON) &&
@@ -1185,19 +1204,20 @@ static void cp210x_set_flow_control(struct tty_struct *tty,
port_priv->crtscts = false;
}
- if (I_IXOFF(tty))
+ if (I_IXOFF(tty)) {
flow_repl |= CP210X_SERIAL_AUTO_RECEIVE;
- else
+
+ flow_ctl.ulXonLimit = cpu_to_le32(128);
+ flow_ctl.ulXoffLimit = cpu_to_le32(128);
+ } else {
flow_repl &= ~CP210X_SERIAL_AUTO_RECEIVE;
+ }
if (I_IXON(tty))
flow_repl |= CP210X_SERIAL_AUTO_TRANSMIT;
else
flow_repl &= ~CP210X_SERIAL_AUTO_TRANSMIT;
- flow_ctl.ulXonLimit = cpu_to_le32(128);
- flow_ctl.ulXoffLimit = cpu_to_le32(128);
-
dev_dbg(&port->dev, "%s - ctrl = 0x%02x, flow = 0x%02x\n", __func__,
ctl_hs, flow_repl);
@@ -1733,7 +1753,19 @@ static int cp2102n_gpioconf_init(struct usb_serial *serial)
priv->gpio_pushpull = (gpio_pushpull >> 3) & 0x0f;
/* 0 indicates GPIO mode, 1 is alternate function */
- priv->gpio_altfunc = (gpio_ctrl >> 2) & 0x0f;
+ if (priv->partnum == CP210X_PARTNUM_CP2102N_QFN20) {
+ /* QFN20 is special... */
+ if (gpio_ctrl & CP2102N_QFN20_GPIO0_CLK_MODE) /* GPIO 0 */
+ priv->gpio_altfunc |= BIT(0);
+ if (gpio_ctrl & CP2102N_QFN20_GPIO1_RS485_MODE) /* GPIO 1 */
+ priv->gpio_altfunc |= BIT(1);
+ if (gpio_ctrl & CP2102N_QFN20_GPIO2_TXLED_MODE) /* GPIO 2 */
+ priv->gpio_altfunc |= BIT(2);
+ if (gpio_ctrl & CP2102N_QFN20_GPIO3_RXLED_MODE) /* GPIO 3 */
+ priv->gpio_altfunc |= BIT(3);
+ } else {
+ priv->gpio_altfunc = (gpio_ctrl >> 2) & 0x0f;
+ }
if (priv->partnum == CP210X_PARTNUM_CP2102N_QFN28) {
/*
@@ -1908,6 +1940,45 @@ static void cp210x_init_max_speed(struct usb_serial *serial)
priv->use_actual_rate = use_actual_rate;
}
+static int cp210x_get_fw_version(struct usb_serial *serial, u16 value)
+{
+ struct cp210x_serial_private *priv = usb_get_serial_data(serial);
+ u8 ver[3];
+ int ret;
+
+ ret = cp210x_read_vendor_block(serial, REQTYPE_DEVICE_TO_HOST, value,
+ ver, sizeof(ver));
+ if (ret)
+ return ret;
+
+ dev_dbg(&serial->interface->dev, "%s - %d.%d.%d\n", __func__,
+ ver[0], ver[1], ver[2]);
+
+ priv->fw_version = ver[0] << 16 | ver[1] << 8 | ver[2];
+
+ return 0;
+}
+
+static void cp210x_determine_quirks(struct usb_serial *serial)
+{
+ struct cp210x_serial_private *priv = usb_get_serial_data(serial);
+ int ret;
+
+ switch (priv->partnum) {
+ case CP210X_PARTNUM_CP2102N_QFN28:
+ case CP210X_PARTNUM_CP2102N_QFN24:
+ case CP210X_PARTNUM_CP2102N_QFN20:
+ ret = cp210x_get_fw_version(serial, CP210X_GET_FW_VER_2N);
+ if (ret)
+ break;
+ if (priv->fw_version <= 0x10004)
+ priv->no_flow_control = true;
+ break;
+ default:
+ break;
+ }
+}
+
static int cp210x_attach(struct usb_serial *serial)
{
int result;
@@ -1928,6 +1999,7 @@ static int cp210x_attach(struct usb_serial *serial)
usb_set_serial_data(serial, priv);
+ cp210x_determine_quirks(serial);
cp210x_init_max_speed(serial);
result = cp210x_gpio_init(serial);
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 6f2659e59b2e..4a1f3a95d017 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -611,6 +611,7 @@ static const struct usb_device_id id_table_combined[] = {
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(FTDI_VID, FTDI_NT_ORIONLX_PLUS_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_NT_ORION_IO_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_NT_ORIONMX_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SYNAPSE_SS200_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CUSTOMWARE_MINIPLEX_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CUSTOMWARE_MINIPLEX2_PID) },
@@ -1034,6 +1035,9 @@ static const struct usb_device_id id_table_combined[] = {
/* Sienna devices */
{ USB_DEVICE(FTDI_VID, FTDI_SIENNA_PID) },
{ USB_DEVICE(ECHELON_VID, ECHELON_U20_PID) },
+ /* IDS GmbH devices */
+ { USB_DEVICE(IDS_VID, IDS_SI31A_PID) },
+ { USB_DEVICE(IDS_VID, IDS_CM31A_PID) },
/* U-Blox devices */
{ USB_DEVICE(UBLOX_VID, UBLOX_C099F9P_ZED_PID) },
{ USB_DEVICE(UBLOX_VID, UBLOX_C099F9P_ODIN_PID) },
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 3d47c6d72256..add602bebd82 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -581,6 +581,7 @@
#define FTDI_NT_ORIONLXM_PID 0x7c90 /* OrionLXm Substation Automation Platform */
#define FTDI_NT_ORIONLX_PLUS_PID 0x7c91 /* OrionLX+ Substation Automation Platform */
#define FTDI_NT_ORION_IO_PID 0x7c92 /* Orion I/O */
+#define FTDI_NT_ORIONMX_PID 0x7c93 /* OrionMX */
/*
* Synapse Wireless product ids (FTDI_VID)
@@ -1568,6 +1569,13 @@
#define UNJO_ISODEBUG_V1_PID 0x150D
/*
+ * IDS GmbH
+ */
+#define IDS_VID 0x2CAF
+#define IDS_SI31A_PID 0x13A2
+#define IDS_CM31A_PID 0x13A3
+
+/*
* U-Blox products (http://www.u-blox.com).
*/
#define UBLOX_VID 0x1546
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index 83c62f920c50..41f1b872d277 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * USB ZyXEL omni.net LCD PLUS driver
+ * USB ZyXEL omni.net driver
*
* Copyright (C) 2013,2017 Johan Hovold <johan@kernel.org>
*
@@ -22,10 +22,11 @@
#include <linux/usb/serial.h>
#define DRIVER_AUTHOR "Alessandro Zummo"
-#define DRIVER_DESC "USB ZyXEL omni.net LCD PLUS Driver"
+#define DRIVER_DESC "USB ZyXEL omni.net Driver"
#define ZYXEL_VENDOR_ID 0x0586
#define ZYXEL_OMNINET_ID 0x1000
+#define ZYXEL_OMNI_56K_PLUS_ID 0x1500
/* This one seems to be a re-branded ZyXEL device */
#define BT_IGNITIONPRO_ID 0x2000
@@ -40,6 +41,7 @@ static void omninet_port_remove(struct usb_serial_port *port);
static const struct usb_device_id id_table[] = {
{ USB_DEVICE(ZYXEL_VENDOR_ID, ZYXEL_OMNINET_ID) },
+ { USB_DEVICE(ZYXEL_VENDOR_ID, ZYXEL_OMNI_56K_PLUS_ID) },
{ USB_DEVICE(ZYXEL_VENDOR_ID, BT_IGNITIONPRO_ID) },
{ } /* Terminating entry */
};
@@ -50,7 +52,7 @@ static struct usb_serial_driver zyxel_omninet_device = {
.owner = THIS_MODULE,
.name = "omninet",
},
- .description = "ZyXEL - omni.net lcd plus usb",
+ .description = "ZyXEL - omni.net usb",
.id_table = id_table,
.num_bulk_out = 2,
.calc_num_ports = omninet_calc_num_ports,
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 3e79a543d3e7..7608584ef4fe 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1240,6 +1240,10 @@ static const struct usb_device_id option_ids[] = {
.driver_info = NCTRL(0) | RSVD(1) },
{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1901, 0xff), /* Telit LN940 (MBIM) */
.driver_info = NCTRL(0) },
+ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x7010, 0xff), /* Telit LE910-S1 (RNDIS) */
+ .driver_info = NCTRL(2) },
+ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x7011, 0xff), /* Telit LE910-S1 (ECM) */
+ .driver_info = NCTRL(2) },
{ USB_DEVICE(TELIT_VENDOR_ID, 0x9010), /* Telit SBL FN980 flashing device */
.driver_info = NCTRL(0) | ZLP },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index fd773d252691..940050c31482 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -113,6 +113,7 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(SONY_VENDOR_ID, SONY_QN3USB_PRODUCT_ID) },
{ USB_DEVICE(SANWA_VENDOR_ID, SANWA_PRODUCT_ID) },
{ USB_DEVICE(ADLINK_VENDOR_ID, ADLINK_ND6530_PRODUCT_ID) },
+ { USB_DEVICE(ADLINK_VENDOR_ID, ADLINK_ND6530GC_PRODUCT_ID) },
{ USB_DEVICE(SMART_VENDOR_ID, SMART_PRODUCT_ID) },
{ USB_DEVICE(AT_VENDOR_ID, AT_VTKIT3_PRODUCT_ID) },
{ } /* Terminating entry */
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index 0f681ddbfd28..6097ee8fccb2 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -158,6 +158,7 @@
/* ADLINK ND-6530 RS232,RS485 and RS422 adapter */
#define ADLINK_VENDOR_ID 0x0b63
#define ADLINK_ND6530_PRODUCT_ID 0x6530
+#define ADLINK_ND6530GC_PRODUCT_ID 0x653a
/* SMART USB Serial Adapter */
#define SMART_VENDOR_ID 0x0b8c
diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c
index 5f2e7f668e68..067690dac24c 100644
--- a/drivers/usb/serial/quatech2.c
+++ b/drivers/usb/serial/quatech2.c
@@ -416,7 +416,7 @@ static void qt2_close(struct usb_serial_port *port)
/* flush the port transmit buffer */
i = usb_control_msg(serial->dev,
- usb_rcvctrlpipe(serial->dev, 0),
+ usb_sndctrlpipe(serial->dev, 0),
QT2_FLUSH_DEVICE, 0x40, 1,
port_priv->device_port, NULL, 0, QT2_USB_TIMEOUT);
@@ -426,7 +426,7 @@ static void qt2_close(struct usb_serial_port *port)
/* flush the port receive buffer */
i = usb_control_msg(serial->dev,
- usb_rcvctrlpipe(serial->dev, 0),
+ usb_sndctrlpipe(serial->dev, 0),
QT2_FLUSH_DEVICE, 0x40, 0,
port_priv->device_port, NULL, 0, QT2_USB_TIMEOUT);
@@ -639,7 +639,7 @@ static int qt2_attach(struct usb_serial *serial)
int status;
/* power on unit */
- status = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+ status = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
0xc2, 0x40, 0x8000, 0, NULL, 0,
QT2_USB_TIMEOUT);
if (status < 0) {
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index caa46ac23db9..310db5abea9d 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -37,6 +37,7 @@
/* Vendor and product ids */
#define TI_VENDOR_ID 0x0451
#define IBM_VENDOR_ID 0x04b3
+#define STARTECH_VENDOR_ID 0x14b0
#define TI_3410_PRODUCT_ID 0x3410
#define IBM_4543_PRODUCT_ID 0x4543
#define IBM_454B_PRODUCT_ID 0x454b
@@ -370,6 +371,7 @@ static const struct usb_device_id ti_id_table_3410[] = {
{ USB_DEVICE(MXU1_VENDOR_ID, MXU1_1131_PRODUCT_ID) },
{ USB_DEVICE(MXU1_VENDOR_ID, MXU1_1150_PRODUCT_ID) },
{ USB_DEVICE(MXU1_VENDOR_ID, MXU1_1151_PRODUCT_ID) },
+ { USB_DEVICE(STARTECH_VENDOR_ID, TI_3410_PRODUCT_ID) },
{ } /* terminator */
};
@@ -408,6 +410,7 @@ static const struct usb_device_id ti_id_table_combined[] = {
{ USB_DEVICE(MXU1_VENDOR_ID, MXU1_1131_PRODUCT_ID) },
{ USB_DEVICE(MXU1_VENDOR_ID, MXU1_1150_PRODUCT_ID) },
{ USB_DEVICE(MXU1_VENDOR_ID, MXU1_1151_PRODUCT_ID) },
+ { USB_DEVICE(STARTECH_VENDOR_ID, TI_3410_PRODUCT_ID) },
{ } /* terminator */
};
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-04 20:42:19 +0100