diff options
Diffstat (limited to 'drivers/usb')
36 files changed, 261 insertions, 104 deletions
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index d6ede989ff22..4ab49d4eebf4 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1607,6 +1607,7 @@ static const struct usb_device_id acm_ids[] = { { NOKIA_PCSUITE_ACM_INFO(0x0154), }, /* Nokia 5800 XpressMusic */ { NOKIA_PCSUITE_ACM_INFO(0x04ce), }, /* Nokia E90 */ { NOKIA_PCSUITE_ACM_INFO(0x01d4), }, /* Nokia E55 */ + { NOKIA_PCSUITE_ACM_INFO(0x0302), }, /* Nokia N8 */ { SAMSUNG_PCSUITE_ACM_INFO(0x6651), }, /* Samsung GTi8510 (INNOV8) */ /* NOTE: non-Nokia COMM/ACM/0xff is likely MSFT RNDIS... NOT a modem! */ diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 6a95017fa62b..e935f71d7a34 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1955,7 +1955,6 @@ int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg) dev_dbg(&rhdev->dev, "usb %s%s\n", (msg.event & PM_EVENT_AUTO ? "auto-" : ""), "resume"); - clear_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags); if (!hcd->driver->bus_resume) return -ENOENT; if (hcd->state == HC_STATE_RUNNING) @@ -1963,6 +1962,7 @@ int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg) hcd->state = HC_STATE_RESUMING; status = hcd->driver->bus_resume(hcd); + clear_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags); if (status == 0) { /* TRSMRCY = 10 msec */ msleep(10); diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 4310cc4b1cb5..0f299b7aad60 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2681,17 +2681,13 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, mutex_lock(&usb_address0_mutex); - if (!udev->config && oldspeed == USB_SPEED_SUPER) { - /* Don't reset USB 3.0 devices during an initial setup */ - usb_set_device_state(udev, USB_STATE_DEFAULT); - } else { - /* Reset the device; full speed may morph to high speed */ - /* FIXME a USB 2.0 device may morph into SuperSpeed on reset. */ - retval = hub_port_reset(hub, port1, udev, delay); - if (retval < 0) /* error or disconnect */ - goto fail; - /* success, speed is known */ - } + /* Reset the device; full speed may morph to high speed */ + /* FIXME a USB 2.0 device may morph into SuperSpeed on reset. */ + retval = hub_port_reset(hub, port1, udev, delay); + if (retval < 0) /* error or disconnect */ + goto fail; + /* success, speed is known */ + retval = -ENODEV; if (oldspeed != USB_SPEED_UNKNOWN && oldspeed != udev->speed) { @@ -2753,6 +2749,11 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, udev->ttport = hdev->ttport; } else if (udev->speed != USB_SPEED_HIGH && hdev->speed == USB_SPEED_HIGH) { + if (!hub->tt.hub) { + dev_err(&udev->dev, "parent hub has no TT\n"); + retval = -EINVAL; + goto fail; + } udev->tt = &hub->tt; udev->ttport = port1; } diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 44c595432d6f..81ce6a8e1d94 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -48,6 +48,10 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x04b4, 0x0526), .driver_info = USB_QUIRK_CONFIG_INTF_STRINGS }, + /* Samsung Android phone modem - ID conflict with SPH-I500 */ + { USB_DEVICE(0x04e8, 0x6601), .driver_info = + USB_QUIRK_CONFIG_INTF_STRINGS }, + /* Roland SC-8820 */ { USB_DEVICE(0x0582, 0x0007), .driver_info = USB_QUIRK_RESET_RESUME }, @@ -68,6 +72,10 @@ static const struct usb_device_id usb_quirk_list[] = { /* M-Systems Flash Disk Pioneers */ { USB_DEVICE(0x08ec, 0x1000), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Keytouch QWERTY Panel keyboard */ + { USB_DEVICE(0x0926, 0x3333), .driver_info = + USB_QUIRK_CONFIG_INTF_STRINGS }, + /* X-Rite/Gretag-Macbeth Eye-One Pro display colorimeter */ { USB_DEVICE(0x0971, 0x2000), .driver_info = USB_QUIRK_NO_SET_INTF }, diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 06bb9d4587e9..d50099675f28 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -546,6 +546,8 @@ config USB_GADGET_CI13XXX_MSM ci13xxx_udc core. This driver depends on OTG driver for PHY initialization, clock management, powering up VBUS, and power management. + This driver is not supported on boards like trout which + has an external PHY. Say "y" to link the driver statically, or "m" to build a dynamically linked module called "ci13xxx_msm" and force all diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c index b5dbb2308f56..6d8e533949eb 100644 --- a/drivers/usb/gadget/f_mass_storage.c +++ b/drivers/usb/gadget/f_mass_storage.c @@ -293,6 +293,7 @@ #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> +#include <linux/usb/composite.h> #include "gadget_chips.h" @@ -2763,7 +2764,7 @@ static struct fsg_common *fsg_common_init(struct fsg_common *common, return ERR_PTR(-ENOMEM); common->free_storage_on_release = 1; } else { - memset(common, 0, sizeof common); + memset(common, 0, sizeof *common); common->free_storage_on_release = 0; } diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c index 20d43da319ae..015118535f77 100644 --- a/drivers/usb/gadget/r8a66597-udc.c +++ b/drivers/usb/gadget/r8a66597-udc.c @@ -258,7 +258,7 @@ static int pipe_buffer_setting(struct r8a66597 *r8a66597, break; case R8A66597_BULK: /* isochronous pipes may be used as bulk pipes */ - if (info->pipe > R8A66597_BASE_PIPENUM_BULK) + if (info->pipe >= R8A66597_BASE_PIPENUM_BULK) bufnum = info->pipe - R8A66597_BASE_PIPENUM_BULK; else bufnum = info->pipe - R8A66597_BASE_PIPENUM_ISOC; diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 24046c0f5878..0e6afa260ed8 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -151,6 +151,8 @@ config USB_EHCI_MSM Qualcomm chipsets. Root Hub has inbuilt TT. This driver depends on OTG driver for PHY initialization, clock management, powering up VBUS, and power management. + This driver is not supported on boards like trout which + has an external PHY. config USB_EHCI_HCD_PPC_OF bool "EHCI support for PPC USB controller on OF platform bus" diff --git a/drivers/usb/host/ehci-au1xxx.c b/drivers/usb/host/ehci-au1xxx.c index 2baf8a849086..a869e3c103d3 100644 --- a/drivers/usb/host/ehci-au1xxx.c +++ b/drivers/usb/host/ehci-au1xxx.c @@ -227,8 +227,8 @@ static int ehci_hcd_au1xxx_drv_suspend(struct device *dev) * mark HW unaccessible. The PM and USB cores make sure that * the root hub is either suspended or stopped. */ - spin_lock_irqsave(&ehci->lock, flags); ehci_prepare_ports_for_controller_suspend(ehci, device_may_wakeup(dev)); + spin_lock_irqsave(&ehci->lock, flags); ehci_writel(ehci, 0, &ehci->regs->intr_enable); (void)ehci_readl(ehci, &ehci->regs->intr_enable); diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index 796ea0c8900f..8a515f0d5988 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -111,6 +111,7 @@ static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci, { int port; u32 temp; + unsigned long flags; /* If remote wakeup is enabled for the root hub but disabled * for the controller, we must adjust all the port wakeup flags @@ -120,6 +121,8 @@ static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci, if (!ehci_to_hcd(ehci)->self.root_hub->do_remote_wakeup || do_wakeup) return; + spin_lock_irqsave(&ehci->lock, flags); + /* clear phy low-power mode before changing wakeup flags */ if (ehci->has_hostpc) { port = HCS_N_PORTS(ehci->hcs_params); @@ -131,7 +134,9 @@ static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci, temp = ehci_readl(ehci, hostpc_reg); ehci_writel(ehci, temp & ~HOSTPC_PHCD, hostpc_reg); } + spin_unlock_irqrestore(&ehci->lock, flags); msleep(5); + spin_lock_irqsave(&ehci->lock, flags); } port = HCS_N_PORTS(ehci->hcs_params); @@ -170,6 +175,8 @@ static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci, /* Does the root hub have a port wakeup pending? */ if (!suspending && (ehci_readl(ehci, &ehci->regs->status) & STS_PCD)) usb_hcd_resume_root_hub(ehci_to_hcd(ehci)); + + spin_unlock_irqrestore(&ehci->lock, flags); } static int ehci_bus_suspend (struct usb_hcd *hcd) diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index 680f2ef4e59f..f784ceb862a3 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -796,7 +796,7 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) hcd = usb_create_hcd(&ehci_omap_hc_driver, &pdev->dev, dev_name(&pdev->dev)); if (!hcd) { - dev_dbg(&pdev->dev, "failed to create hcd with err %d\n", ret); + dev_err(&pdev->dev, "failed to create hcd with err %d\n", ret); ret = -ENOMEM; goto err_create_hcd; } @@ -864,7 +864,7 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) ret = omap_start_ehc(omap, hcd); if (ret) { - dev_dbg(&pdev->dev, "failed to start ehci\n"); + dev_err(&pdev->dev, "failed to start ehci with err %d\n", ret); goto err_start; } @@ -879,7 +879,7 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED); if (ret) { - dev_dbg(&pdev->dev, "failed to add hcd with err %d\n", ret); + dev_err(&pdev->dev, "failed to add hcd with err %d\n", ret); goto err_add_hcd; } diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index bed07d4aab06..07bb982e59f6 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -367,8 +367,8 @@ static int ehci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup) * mark HW unaccessible. The PM and USB cores make sure that * the root hub is either suspended or stopped. */ - spin_lock_irqsave (&ehci->lock, flags); ehci_prepare_ports_for_controller_suspend(ehci, do_wakeup); + spin_lock_irqsave (&ehci->lock, flags); ehci_writel(ehci, 0, &ehci->regs->intr_enable); (void)ehci_readl(ehci, &ehci->regs->intr_enable); diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c index 990f06b89eaa..2e9602a10e9b 100644 --- a/drivers/usb/host/sl811-hcd.c +++ b/drivers/usb/host/sl811-hcd.c @@ -861,6 +861,7 @@ static int sl811h_urb_enqueue( DBG("dev %d ep%d maxpacket %d\n", udev->devnum, epnum, ep->maxpacket); retval = -EINVAL; + kfree(ep); goto fail; } diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c index fcbf4abbf381..0231814a97a5 100644 --- a/drivers/usb/host/xhci-dbg.c +++ b/drivers/usb/host/xhci-dbg.c @@ -169,9 +169,10 @@ static void xhci_print_ports(struct xhci_hcd *xhci) } } -void xhci_print_ir_set(struct xhci_hcd *xhci, struct xhci_intr_reg *ir_set, int set_num) +void xhci_print_ir_set(struct xhci_hcd *xhci, int set_num) { - void *addr; + struct xhci_intr_reg __iomem *ir_set = &xhci->run_regs->ir_set[set_num]; + void __iomem *addr; u32 temp; u64 temp_64; @@ -449,7 +450,7 @@ char *xhci_get_slot_state(struct xhci_hcd *xhci, } } -void xhci_dbg_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx) +static void xhci_dbg_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx) { /* Fields are 32 bits wide, DMA addresses are in bytes */ int field_size = 32 / 8; @@ -488,7 +489,7 @@ void xhci_dbg_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx) dbg_rsvd64(xhci, (u64 *)slot_ctx, dma); } -void xhci_dbg_ep_ctx(struct xhci_hcd *xhci, +static void xhci_dbg_ep_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx, unsigned int last_ep) { diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 1d0f45f0e7a6..a9534396e85b 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -307,7 +307,7 @@ struct xhci_ep_ctx *xhci_get_ep_ctx(struct xhci_hcd *xhci, /***************** Streams structures manipulation *************************/ -void xhci_free_stream_ctx(struct xhci_hcd *xhci, +static void xhci_free_stream_ctx(struct xhci_hcd *xhci, unsigned int num_stream_ctxs, struct xhci_stream_ctx *stream_ctx, dma_addr_t dma) { @@ -335,7 +335,7 @@ void xhci_free_stream_ctx(struct xhci_hcd *xhci, * The stream context array must be a power of 2, and can be as small as * 64 bytes or as large as 1MB. */ -struct xhci_stream_ctx *xhci_alloc_stream_ctx(struct xhci_hcd *xhci, +static struct xhci_stream_ctx *xhci_alloc_stream_ctx(struct xhci_hcd *xhci, unsigned int num_stream_ctxs, dma_addr_t *dma, gfp_t mem_flags) { @@ -1900,11 +1900,11 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) val &= DBOFF_MASK; xhci_dbg(xhci, "// Doorbell array is located at offset 0x%x" " from cap regs base addr\n", val); - xhci->dba = (void *) xhci->cap_regs + val; + xhci->dba = (void __iomem *) xhci->cap_regs + val; xhci_dbg_regs(xhci); xhci_print_run_regs(xhci); /* Set ir_set to interrupt register set 0 */ - xhci->ir_set = (void *) xhci->run_regs->ir_set; + xhci->ir_set = &xhci->run_regs->ir_set[0]; /* * Event ring setup: Allocate a normal ring, but also setup @@ -1961,7 +1961,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) /* Set the event ring dequeue address */ xhci_set_hc_event_deq(xhci); xhci_dbg(xhci, "Wrote ERST address to ir_set 0.\n"); - xhci_print_ir_set(xhci, xhci->ir_set, 0); + xhci_print_ir_set(xhci, 0); /* * XXX: Might need to set the Interrupter Moderation Register to diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 3e8211c1ce5a..3289bf4832c9 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -474,8 +474,11 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci, state->new_deq_seg = find_trb_seg(cur_td->start_seg, dev->eps[ep_index].stopped_trb, &state->new_cycle_state); - if (!state->new_deq_seg) - BUG(); + if (!state->new_deq_seg) { + WARN_ON(1); + return; + } + /* Dig out the cycle state saved by the xHC during the stop ep cmd */ xhci_dbg(xhci, "Finding endpoint context\n"); ep_ctx = xhci_get_ep_ctx(xhci, dev->out_ctx, ep_index); @@ -486,8 +489,10 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci, state->new_deq_seg = find_trb_seg(state->new_deq_seg, state->new_deq_ptr, &state->new_cycle_state); - if (!state->new_deq_seg) - BUG(); + if (!state->new_deq_seg) { + WARN_ON(1); + return; + } trb = &state->new_deq_ptr->generic; if ((trb->field[3] & TRB_TYPE_BITMASK) == TRB_TYPE(TRB_LINK) && @@ -2363,12 +2368,13 @@ static unsigned int count_sg_trbs_needed(struct xhci_hcd *xhci, struct urb *urb) /* Scatter gather list entries may cross 64KB boundaries */ running_total = TRB_MAX_BUFF_SIZE - - (sg_dma_address(sg) & ((1 << TRB_MAX_BUFF_SHIFT) - 1)); + (sg_dma_address(sg) & (TRB_MAX_BUFF_SIZE - 1)); + running_total &= TRB_MAX_BUFF_SIZE - 1; if (running_total != 0) num_trbs++; /* How many more 64KB chunks to transfer, how many more TRBs? */ - while (running_total < sg_dma_len(sg)) { + while (running_total < sg_dma_len(sg) && running_total < temp) { num_trbs++; running_total += TRB_MAX_BUFF_SIZE; } @@ -2394,11 +2400,11 @@ static unsigned int count_sg_trbs_needed(struct xhci_hcd *xhci, struct urb *urb) static void check_trb_math(struct urb *urb, int num_trbs, int running_total) { if (num_trbs != 0) - dev_dbg(&urb->dev->dev, "%s - ep %#x - Miscalculated number of " + dev_err(&urb->dev->dev, "%s - ep %#x - Miscalculated number of " "TRBs, %d left\n", __func__, urb->ep->desc.bEndpointAddress, num_trbs); if (running_total != urb->transfer_buffer_length) - dev_dbg(&urb->dev->dev, "%s - ep %#x - Miscalculated tx length, " + dev_err(&urb->dev->dev, "%s - ep %#x - Miscalculated tx length, " "queued %#x (%d), asked for %#x (%d)\n", __func__, urb->ep->desc.bEndpointAddress, @@ -2533,8 +2539,7 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags, sg = urb->sg; addr = (u64) sg_dma_address(sg); this_sg_len = sg_dma_len(sg); - trb_buff_len = TRB_MAX_BUFF_SIZE - - (addr & ((1 << TRB_MAX_BUFF_SHIFT) - 1)); + trb_buff_len = TRB_MAX_BUFF_SIZE - (addr & (TRB_MAX_BUFF_SIZE - 1)); trb_buff_len = min_t(int, trb_buff_len, this_sg_len); if (trb_buff_len > urb->transfer_buffer_length) trb_buff_len = urb->transfer_buffer_length; @@ -2572,7 +2577,7 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags, (unsigned int) (addr + TRB_MAX_BUFF_SIZE) & ~(TRB_MAX_BUFF_SIZE - 1), (unsigned int) addr + trb_buff_len); if (TRB_MAX_BUFF_SIZE - - (addr & ((1 << TRB_MAX_BUFF_SHIFT) - 1)) < trb_buff_len) { + (addr & (TRB_MAX_BUFF_SIZE - 1)) < trb_buff_len) { xhci_warn(xhci, "WARN: sg dma xfer crosses 64KB boundaries!\n"); xhci_dbg(xhci, "Next boundary at %#x, end dma = %#x\n", (unsigned int) (addr + TRB_MAX_BUFF_SIZE) & ~(TRB_MAX_BUFF_SIZE - 1), @@ -2616,7 +2621,7 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags, } trb_buff_len = TRB_MAX_BUFF_SIZE - - (addr & ((1 << TRB_MAX_BUFF_SHIFT) - 1)); + (addr & (TRB_MAX_BUFF_SIZE - 1)); trb_buff_len = min_t(int, trb_buff_len, this_sg_len); if (running_total + trb_buff_len > urb->transfer_buffer_length) trb_buff_len = @@ -2656,7 +2661,8 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, num_trbs = 0; /* How much data is (potentially) left before the 64KB boundary? */ running_total = TRB_MAX_BUFF_SIZE - - (urb->transfer_dma & ((1 << TRB_MAX_BUFF_SHIFT) - 1)); + (urb->transfer_dma & (TRB_MAX_BUFF_SIZE - 1)); + running_total &= TRB_MAX_BUFF_SIZE - 1; /* If there's some data on this 64KB chunk, or we have to send a * zero-length transfer, we need at least one TRB @@ -2700,8 +2706,8 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, /* How much data is in the first TRB? */ addr = (u64) urb->transfer_dma; trb_buff_len = TRB_MAX_BUFF_SIZE - - (urb->transfer_dma & ((1 << TRB_MAX_BUFF_SHIFT) - 1)); - if (urb->transfer_buffer_length < trb_buff_len) + (urb->transfer_dma & (TRB_MAX_BUFF_SIZE - 1)); + if (trb_buff_len > urb->transfer_buffer_length) trb_buff_len = urb->transfer_buffer_length; first_trb = true; @@ -2879,8 +2885,8 @@ static int count_isoc_trbs_needed(struct xhci_hcd *xhci, addr = (u64) (urb->transfer_dma + urb->iso_frame_desc[i].offset); td_len = urb->iso_frame_desc[i].length; - running_total = TRB_MAX_BUFF_SIZE - - (addr & ((1 << TRB_MAX_BUFF_SHIFT) - 1)); + running_total = TRB_MAX_BUFF_SIZE - (addr & (TRB_MAX_BUFF_SIZE - 1)); + running_total &= TRB_MAX_BUFF_SIZE - 1; if (running_total != 0) num_trbs++; diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 34cf4e165877..2083fc2179b2 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -109,7 +109,7 @@ int xhci_halt(struct xhci_hcd *xhci) /* * Set the run bit and wait for the host to be running. */ -int xhci_start(struct xhci_hcd *xhci) +static int xhci_start(struct xhci_hcd *xhci) { u32 temp; int ret; @@ -329,7 +329,7 @@ int xhci_init(struct usb_hcd *hcd) #ifdef CONFIG_USB_XHCI_HCD_DEBUGGING -void xhci_event_ring_work(unsigned long arg) +static void xhci_event_ring_work(unsigned long arg) { unsigned long flags; int temp; @@ -473,7 +473,7 @@ int xhci_run(struct usb_hcd *hcd) xhci->ir_set, (unsigned int) ER_IRQ_ENABLE(temp)); xhci_writel(xhci, ER_IRQ_ENABLE(temp), &xhci->ir_set->irq_pending); - xhci_print_ir_set(xhci, xhci->ir_set, 0); + xhci_print_ir_set(xhci, 0); if (NUM_TEST_NOOPS > 0) doorbell = xhci_setup_one_noop(xhci); @@ -528,7 +528,7 @@ void xhci_stop(struct usb_hcd *hcd) temp = xhci_readl(xhci, &xhci->ir_set->irq_pending); xhci_writel(xhci, ER_IRQ_DISABLE(temp), &xhci->ir_set->irq_pending); - xhci_print_ir_set(xhci, xhci->ir_set, 0); + xhci_print_ir_set(xhci, 0); xhci_dbg(xhci, "cleaning up memory\n"); xhci_mem_cleanup(xhci); @@ -755,7 +755,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) temp = xhci_readl(xhci, &xhci->ir_set->irq_pending); xhci_writel(xhci, ER_IRQ_DISABLE(temp), &xhci->ir_set->irq_pending); - xhci_print_ir_set(xhci, xhci->ir_set, 0); + xhci_print_ir_set(xhci, 0); xhci_dbg(xhci, "cleaning up memory\n"); xhci_mem_cleanup(xhci); @@ -857,7 +857,7 @@ unsigned int xhci_last_valid_endpoint(u32 added_ctxs) /* Returns 1 if the arguments are OK; * returns 0 this is a root hub; returns -EINVAL for NULL pointers. */ -int xhci_check_args(struct usb_hcd *hcd, struct usb_device *udev, +static int xhci_check_args(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep, int check_ep, bool check_virt_dev, const char *func) { struct xhci_hcd *xhci; @@ -1693,7 +1693,7 @@ static void xhci_setup_input_ctx_for_config_ep(struct xhci_hcd *xhci, xhci_dbg_ctx(xhci, in_ctx, xhci_last_valid_endpoint(add_flags)); } -void xhci_setup_input_ctx_for_quirk(struct xhci_hcd *xhci, +static void xhci_setup_input_ctx_for_quirk(struct xhci_hcd *xhci, unsigned int slot_id, unsigned int ep_index, struct xhci_dequeue_state *deq_state) { diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 7f236fd22015..7f127df6dd55 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1348,7 +1348,7 @@ static inline int xhci_link_trb_quirk(struct xhci_hcd *xhci) } /* xHCI debugging */ -void xhci_print_ir_set(struct xhci_hcd *xhci, struct xhci_intr_reg *ir_set, int set_num); +void xhci_print_ir_set(struct xhci_hcd *xhci, int set_num); void xhci_print_registers(struct xhci_hcd *xhci); void xhci_dbg_regs(struct xhci_hcd *xhci); void xhci_print_run_regs(struct xhci_hcd *xhci); diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c index eeba228eb2af..9d49d1cd7ce2 100644 --- a/drivers/usb/musb/blackfin.c +++ b/drivers/usb/musb/blackfin.c @@ -404,6 +404,7 @@ static int bfin_musb_init(struct musb *musb) musb->xceiv->set_power = bfin_musb_set_power; musb->isr = blackfin_interrupt; + musb->double_buffer_not_ok = true; return 0; } diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 07cf394e491b..c292d5c499e7 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -128,12 +128,7 @@ MODULE_ALIAS("platform:" MUSB_DRIVER_NAME); static inline struct musb *dev_to_musb(struct device *dev) { -#ifdef CONFIG_USB_MUSB_HDRC_HCD - /* usbcore insists dev->driver_data is a "struct hcd *" */ - return hcd_to_musb(dev_get_drvdata(dev)); -#else return dev_get_drvdata(dev); -#endif } /*-------------------------------------------------------------------------*/ @@ -1869,6 +1864,7 @@ allocate_instance(struct device *dev, INIT_LIST_HEAD(&musb->out_bulk); hcd->uses_new_polling = 1; + hcd->has_tt = 1; musb->vbuserr_retry = VBUSERR_RETRY_COUNT; musb->a_wait_bcon = OTG_TIME_A_WAIT_BCON; @@ -1876,10 +1872,9 @@ allocate_instance(struct device *dev, musb = kzalloc(sizeof *musb, GFP_KERNEL); if (!musb) return NULL; - dev_set_drvdata(dev, musb); #endif - + dev_set_drvdata(dev, musb); musb->mregs = mbase; musb->ctrl_base = mbase; musb->nIrq = -ENODEV; @@ -2191,7 +2186,7 @@ static int __init musb_probe(struct platform_device *pdev) void __iomem *base; iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!iomem || irq == 0) + if (!iomem || irq <= 0) return -ENODEV; base = ioremap(iomem->start, resource_size(iomem)); diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index d0c236f8e191..e6400be8a0f8 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -497,6 +497,19 @@ struct musb { struct usb_gadget_driver *gadget_driver; /* its driver */ #endif + /* + * FIXME: Remove this flag. + * + * This is only added to allow Blackfin to work + * with current driver. For some unknown reason + * Blackfin doesn't work with double buffering + * and that's enabled by default. + * + * We added this flag to forcefully disable double + * buffering until we get it working. + */ + unsigned double_buffer_not_ok:1 __deprecated; + struct musb_hdrc_config *config; #ifdef MUSB_CONFIG_PROC_FS diff --git a/drivers/usb/musb/musb_dma.h b/drivers/usb/musb/musb_dma.h index 916065ba9e70..3a97c4e2d4f5 100644 --- a/drivers/usb/musb/musb_dma.h +++ b/drivers/usb/musb/musb_dma.h @@ -169,6 +169,9 @@ struct dma_controller { dma_addr_t dma_addr, u32 length); int (*channel_abort)(struct dma_channel *); + int (*is_compatible)(struct dma_channel *channel, + u16 maxpacket, + void *buf, u32 length); }; /* called after channel_program(), may indicate a fault */ diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index ed58c6c8f15c..2fe304611dcf 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -92,11 +92,33 @@ /* ----------------------------------------------------------------------- */ +#define is_buffer_mapped(req) (is_dma_capable() && \ + (req->map_state != UN_MAPPED)) + /* Maps the buffer to dma */ static inline void map_dma_buffer(struct musb_request *request, - struct musb *musb) + struct musb *musb, struct musb_ep *musb_ep) { + int compatible = true; + struct dma_controller *dma = musb->dma_controller; + + request->map_state = UN_MAPPED; + + if (!is_dma_capable() || !musb_ep->dma) + return; + + /* Check if DMA engine can handle this request. + * DMA code must reject the USB request explicitly. + * Default behaviour is to map the request. + */ + if (dma->is_compatible) + compatible = dma->is_compatible(musb_ep->dma, + musb_ep->packet_sz, request->request.buf, + request->request.length); + if (!compatible) + return; + if (request->request.dma == DMA_ADDR_INVALID) { request->request.dma = dma_map_single( musb->controller, @@ -105,7 +127,7 @@ static inline void map_dma_buffer(struct musb_request *request, request->tx ? DMA_TO_DEVICE : DMA_FROM_DEVICE); - request->mapped = 1; + request->map_state = MUSB_MAPPED; } else { dma_sync_single_for_device(musb->controller, request->request.dma, @@ -113,7 +135,7 @@ static inline void map_dma_buffer(struct musb_request *request, request->tx ? DMA_TO_DEVICE : DMA_FROM_DEVICE); - request->mapped = 0; + request->map_state = PRE_MAPPED; } } @@ -121,11 +143,14 @@ static inline void map_dma_buffer(struct musb_request *request, static inline void unmap_dma_buffer(struct musb_request *request, struct musb *musb) { + if (!is_buffer_mapped(request)) + return; + if (request->request.dma == DMA_ADDR_INVALID) { DBG(20, "not unmapping a never mapped buffer\n"); return; } - if (request->mapped) { + if (request->map_state == MUSB_MAPPED) { dma_unmap_single(musb->controller, request->request.dma, request->request.length, @@ -133,16 +158,15 @@ static inline void unmap_dma_buffer(struct musb_request *request, ? DMA_TO_DEVICE : DMA_FROM_DEVICE); request->request.dma = DMA_ADDR_INVALID; - request->mapped = 0; - } else { + } else { /* PRE_MAPPED */ dma_sync_single_for_cpu(musb->controller, request->request.dma, request->request.length, request->tx ? DMA_TO_DEVICE : DMA_FROM_DEVICE); - } + request->map_state = UN_MAPPED; } /* @@ -172,8 +196,7 @@ __acquires(ep->musb->lock) ep->busy = 1; spin_unlock(&musb->lock); - if (is_dma_capable() && ep->dma) - unmap_dma_buffer(req, musb); + unmap_dma_buffer(req, musb); if (request->status == 0) DBG(5, "%s done request %p, %d/%d\n", ep->end_point.name, request, @@ -335,7 +358,7 @@ static void txstate(struct musb *musb, struct musb_request *req) csr); #ifndef CONFIG_MUSB_PIO_ONLY - if (is_dma_capable() && musb_ep->dma) { + if (is_buffer_mapped(req)) { struct dma_controller *c = musb->dma_controller; size_t request_size; @@ -436,8 +459,7 @@ static void txstate(struct musb *musb, struct musb_request *req) * Unmap the dma buffer back to cpu if dma channel * programming fails */ - if (is_dma_capable() && musb_ep->dma) - unmap_dma_buffer(req, musb); + unmap_dma_buffer(req, musb); musb_write_fifo(musb_ep->hw_ep, fifo_count, (u8 *) (request->buf + request->actual)); @@ -627,7 +649,7 @@ static void rxstate(struct musb *musb, struct musb_request *req) return; } - if (is_cppi_enabled() && musb_ep->dma) { + if (is_cppi_enabled() && is_buffer_mapped(req)) { struct dma_controller *c = musb->dma_controller; struct dma_channel *channel = musb_ep->dma; @@ -658,7 +680,7 @@ static void rxstate(struct musb *musb, struct musb_request *req) len = musb_readw(epio, MUSB_RXCOUNT); if (request->actual < request->length) { #ifdef CONFIG_USB_INVENTRA_DMA - if (is_dma_capable() && musb_ep->dma) { + if (is_buffer_mapped(req)) { struct dma_controller *c; struct dma_channel *channel; int use_dma = 0; @@ -742,7 +764,7 @@ static void rxstate(struct musb *musb, struct musb_request *req) fifo_count = min_t(unsigned, len, fifo_count); #ifdef CONFIG_USB_TUSB_OMAP_DMA - if (tusb_dma_omap() && musb_ep->dma) { + if (tusb_dma_omap() && is_buffer_mapped(req)) { struct dma_controller *c = musb->dma_controller; struct dma_channel *channel = musb_ep->dma; u32 dma_addr = request->dma + request->actual; @@ -762,7 +784,7 @@ static void rxstate(struct musb *musb, struct musb_request *req) * programming fails. This buffer is mapped if the * channel allocation is successful */ - if (is_dma_capable() && musb_ep->dma) { + if (is_buffer_mapped(req)) { unmap_dma_buffer(req, musb); /* @@ -989,7 +1011,11 @@ static int musb_gadget_enable(struct usb_ep *ep, /* Set TXMAXP with the FIFO size of the endpoint * to disable double buffering mode. */ - musb_writew(regs, MUSB_TXMAXP, musb_ep->packet_sz | (musb_ep->hb_mult << 11)); + if (musb->double_buffer_not_ok) + musb_writew(regs, MUSB_TXMAXP, hw_ep->max_packet_sz_tx); + else + musb_writew(regs, MUSB_TXMAXP, musb_ep->packet_sz + | (musb_ep->hb_mult << 11)); csr = MUSB_TXCSR_MODE | MUSB_TXCSR_CLRDATATOG; if (musb_readw(regs, MUSB_TXCSR) @@ -1025,7 +1051,11 @@ static int musb_gadget_enable(struct usb_ep *ep, /* Set RXMAXP with the FIFO size of the endpoint * to disable double buffering mode. */ - musb_writew(regs, MUSB_RXMAXP, musb_ep->packet_sz | (musb_ep->hb_mult << 11)); + if (musb->double_buffer_not_ok) + musb_writew(regs, MUSB_RXMAXP, hw_ep->max_packet_sz_tx); + else + musb_writew(regs, MUSB_RXMAXP, musb_ep->packet_sz + | (musb_ep->hb_mult << 11)); /* force shared fifo to OUT-only mode */ if (hw_ep->is_shared_fifo) { @@ -1214,10 +1244,7 @@ static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req, request->epnum = musb_ep->current_epnum; request->tx = musb_ep->is_in; - if (is_dma_capable() && musb_ep->dma) - map_dma_buffer(request, musb); - else - request->mapped = 0; + map_dma_buffer(request, musb, musb_ep); spin_lock_irqsave(&musb->lock, lockflags); diff --git a/drivers/usb/musb/musb_gadget.h b/drivers/usb/musb/musb_gadget.h index dec8dc008191..a55354fbccf5 100644 --- a/drivers/usb/musb/musb_gadget.h +++ b/drivers/usb/musb/musb_gadget.h @@ -35,13 +35,19 @@ #ifndef __MUSB_GADGET_H #define __MUSB_GADGET_H +enum buffer_map_state { + UN_MAPPED = 0, + PRE_MAPPED, + MUSB_MAPPED +}; + struct musb_request { struct usb_request request; struct musb_ep *ep; struct musb *musb; u8 tx; /* endpoint direction */ u8 epnum; - u8 mapped; + enum buffer_map_state map_state; }; static inline struct musb_request *to_musb_request(struct usb_request *req) diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 4d5bcb4e14d2..0f523d7db57b 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -609,7 +609,7 @@ musb_rx_reinit(struct musb *musb, struct musb_qh *qh, struct musb_hw_ep *ep) /* Set RXMAXP with the FIFO size of the endpoint * to disable double buffer mode. */ - if (musb->hwvers < MUSB_HWVERS_2000) + if (musb->double_buffer_not_ok) musb_writew(ep->regs, MUSB_RXMAXP, ep->max_packet_sz_rx); else musb_writew(ep->regs, MUSB_RXMAXP, @@ -784,14 +784,13 @@ static void musb_ep_program(struct musb *musb, u8 epnum, /* protocol/endpoint/interval/NAKlimit */ if (epnum) { musb_writeb(epio, MUSB_TXTYPE, qh->type_reg); - if (can_bulk_split(musb, qh->type)) + if (musb->double_buffer_not_ok) musb_writew(epio, MUSB_TXMAXP, - packet_sz - | ((hw_ep->max_packet_sz_tx / - packet_sz) - 1) << 11); + hw_ep->max_packet_sz_tx); else musb_writew(epio, MUSB_TXMAXP, - packet_sz); + qh->maxpacket | + ((qh->hb_mult - 1) << 11)); musb_writeb(epio, MUSB_TXINTERVAL, qh->intv_reg); } else { musb_writeb(epio, MUSB_NAKLIMIT0, qh->intv_reg); diff --git a/drivers/usb/musb/musbhsdma.h b/drivers/usb/musb/musbhsdma.h index f763d62f151c..21056c924c74 100644 --- a/drivers/usb/musb/musbhsdma.h +++ b/drivers/usb/musb/musbhsdma.h @@ -94,24 +94,33 @@ static inline void musb_write_hsdma_addr(void __iomem *mbase, { musb_writew(mbase, MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDR_LOW), - ((u16)((u32) dma_addr & 0xFFFF))); + dma_addr); musb_writew(mbase, MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDR_HIGH), - ((u16)(((u32) dma_addr >> 16) & 0xFFFF))); + (dma_addr >> 16)); } static inline u32 musb_read_hsdma_count(void __iomem *mbase, u8 bchannel) { - return musb_readl(mbase, + u32 count = musb_readw(mbase, MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_HIGH)); + + count = count << 16; + + count |= musb_readw(mbase, + MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_LOW)); + + return count; } static inline void musb_write_hsdma_count(void __iomem *mbase, u8 bchannel, u32 len) { - musb_writel(mbase, + musb_writew(mbase, + MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_LOW),len); + musb_writew(mbase, MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_HIGH), - len); + (len >> 16)); } #endif /* CONFIG_BLACKFIN */ diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index a3f12333fc41..bc8badd16897 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -362,6 +362,7 @@ static int omap2430_musb_init(struct musb *musb) static int omap2430_musb_exit(struct musb *musb) { + del_timer_sync(&musb_idle_timer); omap2430_low_level_exit(musb); otg_put_transceiver(musb->xceiv); diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig index 9fb875d5f09c..9ffc8237fb4b 100644 --- a/drivers/usb/otg/Kconfig +++ b/drivers/usb/otg/Kconfig @@ -103,6 +103,8 @@ config USB_MSM_OTG_72K required after resetting the hardware and power management. This driver is required even for peripheral only or host only mode configurations. + This driver is not supported on boards like trout which + has an external PHY. config AB8500_USB tristate "AB8500 USB Transceiver Driver" diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 4787c0cd063f..f349a3629d00 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -100,6 +100,7 @@ struct ftdi_sio_quirk { static int ftdi_jtag_probe(struct usb_serial *serial); static int ftdi_mtxorb_hack_setup(struct usb_serial *serial); static int ftdi_NDI_device_setup(struct usb_serial *serial); +static int ftdi_stmclite_probe(struct usb_serial *serial); static void ftdi_USB_UIRT_setup(struct ftdi_private *priv); static void ftdi_HE_TIRA1_setup(struct ftdi_private *priv); @@ -123,6 +124,10 @@ static struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = { .port_probe = ftdi_HE_TIRA1_setup, }; +static struct ftdi_sio_quirk ftdi_stmclite_quirk = { + .probe = ftdi_stmclite_probe, +}; + /* * The 8U232AM has the same API as the sio except for: * - it can support MUCH higher baudrates; up to: @@ -616,6 +621,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_OCEANIC_PID) }, { USB_DEVICE(TTI_VID, TTI_QL355P_PID) }, { USB_DEVICE(FTDI_VID, FTDI_RM_CANVIEW_PID) }, + { USB_DEVICE(ACTON_VID, ACTON_SPECTRAPRO_PID) }, { USB_DEVICE(CONTEC_VID, CONTEC_COM1USBH_PID) }, { USB_DEVICE(BANDB_VID, BANDB_USOTL4_PID) }, { USB_DEVICE(BANDB_VID, BANDB_USTL4_PID) }, @@ -810,6 +816,8 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_DOTEC_PID) }, { USB_DEVICE(QIHARDWARE_VID, MILKYMISTONE_JTAGSERIAL_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(ST_VID, ST_STMCLT1030_PID), + .driver_info = (kernel_ulong_t)&ftdi_stmclite_quirk }, { }, /* Optional parameter entry */ { } /* Terminating entry */ }; @@ -1709,6 +1717,25 @@ static int ftdi_jtag_probe(struct usb_serial *serial) } /* + * First and second port on STMCLiteadaptors is reserved for JTAG interface + * and the forth port for pio + */ +static int ftdi_stmclite_probe(struct usb_serial *serial) +{ + struct usb_device *udev = serial->dev; + struct usb_interface *interface = serial->interface; + + dbg("%s", __func__); + + if (interface == udev->actconfig->interface[2]) + return 0; + + dev_info(&udev->dev, "Ignoring serial port reserved for JTAG\n"); + + return -ENODEV; +} + +/* * The Matrix Orbital VK204-25-USB has an invalid IN endpoint. * We have to correct it if we want to read from it. */ diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index ed160def8584..117e8e6f93c6 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -518,6 +518,12 @@ #define RATOC_PRODUCT_ID_USB60F 0xb020 /* + * Acton Research Corp. + */ +#define ACTON_VID 0x0647 /* Vendor ID */ +#define ACTON_SPECTRAPRO_PID 0x0100 + +/* * Contec products (http://www.contec.com) * Submitted by Daniel Sangorrin */ @@ -1034,6 +1040,12 @@ #define WHT_PID 0x0004 /* Wireless Handheld Terminal */ /* + * STMicroelectonics + */ +#define ST_VID 0x0483 +#define ST_STMCLT1030_PID 0x3747 /* ST Micro Connect Lite STMCLT1030 */ + +/* * Papouch products (http://www.papouch.com/) * Submitted by Folkert van Heusden */ diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index cd769ef24f8a..3b246d93cf22 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -2889,8 +2889,8 @@ static void load_application_firmware(struct edgeport_serial *edge_serial) dbg("%s %d.%d.%d", fw_info, rec->data[0], rec->data[1], build); - edge_serial->product_info.FirmwareMajorVersion = fw->data[0]; - edge_serial->product_info.FirmwareMinorVersion = fw->data[1]; + edge_serial->product_info.FirmwareMajorVersion = rec->data[0]; + edge_serial->product_info.FirmwareMinorVersion = rec->data[1]; edge_serial->product_info.FirmwareBuildNumber = cpu_to_le16(build); for (rec = ihex_next_binrec(rec); rec; diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 7481ff8a49e4..0457813eebee 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -301,6 +301,9 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x1199, 0x68A3), /* Sierra Wireless Direct IP modems */ .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist }, + { USB_DEVICE(0x0f3d, 0x68A3), /* Airprime/Sierra Wireless Direct IP modems */ + .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist + }, { USB_DEVICE(0x413C, 0x08133) }, /* Dell Computer Corp. Wireless 5720 VZW Mobile Broadband (EVDO Rev-A) Minicard GPS Port */ { } diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index b2902f307b47..a910004f4079 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -369,9 +369,9 @@ failed_1port: static void __exit ti_exit(void) { + usb_deregister(&ti_usb_driver); usb_serial_deregister(&ti_1port_device); usb_serial_deregister(&ti_2port_device); - usb_deregister(&ti_usb_driver); } diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c index b004b2a485c3..9c014e2ecd68 100644 --- a/drivers/usb/serial/usb_wwan.c +++ b/drivers/usb/serial/usb_wwan.c @@ -295,12 +295,15 @@ static void usb_wwan_indat_callback(struct urb *urb) __func__, status, endpoint); } else { tty = tty_port_tty_get(&port->port); - if (urb->actual_length) { - tty_insert_flip_string(tty, data, urb->actual_length); - tty_flip_buffer_push(tty); - } else - dbg("%s: empty read urb received", __func__); - tty_kref_put(tty); + if (tty) { + if (urb->actual_length) { + tty_insert_flip_string(tty, data, + urb->actual_length); + tty_flip_buffer_push(tty); + } else + dbg("%s: empty read urb received", __func__); + tty_kref_put(tty); + } /* Resubmit urb so we continue receiving */ if (status != -ESHUTDOWN) { diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index 15a5d89b7f39..1c11959a7d58 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -27,6 +27,7 @@ #include <linux/uaccess.h> #include <linux/usb.h> #include <linux/usb/serial.h> +#include <linux/usb/cdc.h> #include "visor.h" /* @@ -479,6 +480,17 @@ static int visor_probe(struct usb_serial *serial, dbg("%s", __func__); + /* + * some Samsung Android phones in modem mode have the same ID + * as SPH-I500, but they are ACM devices, so dont bind to them + */ + if (id->idVendor == SAMSUNG_VENDOR_ID && + id->idProduct == SAMSUNG_SPH_I500_ID && + serial->dev->descriptor.bDeviceClass == USB_CLASS_COMM && + serial->dev->descriptor.bDeviceSubClass == + USB_CDC_SUBCLASS_ACM) + return -ENODEV; + if (serial->dev->actconfig->desc.bConfigurationValue != 1) { dev_err(&serial->dev->dev, "active config #%d != 1 ??\n", serial->dev->actconfig->desc.bConfigurationValue); diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 24bd5d7c3deb..c1602b8c5594 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1397,6 +1397,13 @@ UNUSUAL_DEV( 0x0f19, 0x0105, 0x0100, 0x0100, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE ), +/* Submitted by Nick Holloway */ +UNUSUAL_DEV( 0x0f88, 0x042e, 0x0100, 0x0100, + "VTech", + "Kidizoom", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY ), + /* Reported by Michael Stattmann <michael@stattmann.com> */ UNUSUAL_DEV( 0x0fce, 0xd008, 0x0000, 0x0000, "Sony Ericsson", @@ -1890,6 +1897,13 @@ UNUSUAL_DEV( 0x1e68, 0x001b, 0x0000, 0x0000, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE | US_FL_SANE_SENSE ), +/* Reported by Jasper Mackenzie <scarletpimpernal@hotmail.com> */ +UNUSUAL_DEV( 0x1e74, 0x4621, 0x0000, 0x0000, + "Coby Electronics", + "MP3 Player", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_BULK_IGNORE_TAG | US_FL_MAX_SECTORS_64 ), + UNUSUAL_DEV( 0x2116, 0x0320, 0x0001, 0x0001, "ST", "2A", |