diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/thermal/ti-soc-thermal/omap4-thermal-data.c | 3 | ||||
| -rw-r--r-- | drivers/thermal/ti-soc-thermal/ti-bandgap.c | 13 | ||||
| -rw-r--r-- | drivers/thermal/ti-soc-thermal/ti-bandgap.h | 2 |
3 files changed, 14 insertions, 4 deletions
diff --git a/drivers/thermal/ti-soc-thermal/omap4-thermal-data.c b/drivers/thermal/ti-soc-thermal/omap4-thermal-data.c index fdb8a495ab69..80c051ae8a6c 100644 --- a/drivers/thermal/ti-soc-thermal/omap4-thermal-data.c +++ b/drivers/thermal/ti-soc-thermal/omap4-thermal-data.c @@ -58,7 +58,8 @@ omap4430_adc_to_temp[OMAP4430_ADC_END_VALUE - OMAP4430_ADC_START_VALUE + 1] = { const struct ti_bandgap_data omap4430_data = { .features = TI_BANDGAP_FEATURE_MODE_CONFIG | TI_BANDGAP_FEATURE_CLK_CTRL | - TI_BANDGAP_FEATURE_POWER_SWITCH, + TI_BANDGAP_FEATURE_POWER_SWITCH | + TI_BANDGAP_FEATURE_CONT_MODE_ONLY, .fclock_name = "bandgap_fclk", .div_ck_name = "bandgap_fclk", .conv_table = omap4430_adc_to_temp, diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.c b/drivers/thermal/ti-soc-thermal/ti-bandgap.c index 8266181cbd10..6e9255124f31 100644 --- a/drivers/thermal/ti-soc-thermal/ti-bandgap.c +++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.c @@ -15,6 +15,7 @@ #include <linux/kernel.h> #include <linux/interrupt.h> #include <linux/clk.h> +#include <linux/delay.h> #include <linux/gpio/consumer.h> #include <linux/platform_device.h> #include <linux/err.h> @@ -605,9 +606,13 @@ ti_bandgap_force_single_read(struct ti_bandgap *bgp, int id) struct temp_sensor_registers *tsr = bgp->conf->sensors[id].registers; u32 counter; - /* Select single conversion mode */ - if (TI_BANDGAP_HAS(bgp, MODE_CONFIG)) - RMW_BITS(bgp, id, bgap_mode_ctrl, mode_ctrl_mask, 0); + /* Select continuous or single conversion mode */ + if (TI_BANDGAP_HAS(bgp, MODE_CONFIG)) { + if (TI_BANDGAP_HAS(bgp, CONT_MODE_ONLY)) + RMW_BITS(bgp, id, bgap_mode_ctrl, mode_ctrl_mask, 1); + else + RMW_BITS(bgp, id, bgap_mode_ctrl, mode_ctrl_mask, 0); + } /* Set Start of Conversion if available */ if (tsr->bgap_soc_mask) { @@ -619,6 +624,7 @@ ti_bandgap_force_single_read(struct ti_bandgap *bgp, int id) if (ti_bandgap_readl(bgp, tsr->temp_sensor_ctrl) & tsr->bgap_eocz_mask) break; + udelay(1); } /* Clear Start of Conversion if available */ @@ -631,6 +637,7 @@ ti_bandgap_force_single_read(struct ti_bandgap *bgp, int id) if (!(ti_bandgap_readl(bgp, tsr->temp_sensor_ctrl) & tsr->bgap_eocz_mask)) break; + udelay(1); } return 0; diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.h b/drivers/thermal/ti-soc-thermal/ti-bandgap.h index ed0ea4b17b25..1f4bbaf31675 100644 --- a/drivers/thermal/ti-soc-thermal/ti-bandgap.h +++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.h @@ -280,6 +280,7 @@ struct ti_temp_sensor { * has Errata 814 * TI_BANDGAP_FEATURE_UNRELIABLE - used when the sensor readings are too * inaccurate. + * TI_BANDGAP_FEATURE_CONT_MODE_ONLY - used when single mode hangs the sensor * TI_BANDGAP_HAS(b, f) - macro to check if a bandgap device is capable of a * specific feature (above) or not. Return non-zero, if yes. */ @@ -295,6 +296,7 @@ struct ti_temp_sensor { #define TI_BANDGAP_FEATURE_HISTORY_BUFFER BIT(9) #define TI_BANDGAP_FEATURE_ERRATA_814 BIT(10) #define TI_BANDGAP_FEATURE_UNRELIABLE BIT(11) +#define TI_BANDGAP_FEATURE_CONT_MODE_ONLY BIT(12) #define TI_BANDGAP_HAS(b, f) \ ((b)->conf->features & TI_BANDGAP_FEATURE_ ## f) |