summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/usb/dwc2.txt (follow)
Commit message (Collapse)AuthorAgeFilesLines
* dt-bindings: usb: Convert DWC2 bindings to json-schemaBenjamin Gaignard2020-01-081-64/+0
| | | | | | | | | | Convert DWC2 bindings to DT schema format using json-schema. DWC2 is widely use but a couple of compatibles and properties (vusb_d-supply,vusb_a-supply) were missing in dwc2.txt, the patch add them. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Signed-off-by: Rob Herring <robh@kernel.org>
* Documentation: dt-bindings: Add snps,need-phy-for-wake for dwc2 USBDouglas Anderson2019-06-181-0/+3
| | | | | | | | | | Some SoCs with a dwc2 USB controller may need to keep the PHY on to support remote wakeup. Allow specifying this as a device tree property. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* dt-bindings: usb: dwc2: Document quirk to reset PHY upon wakeupDouglas Anderson2019-05-031-0/+2
| | | | | | | | | | On Rockchip rk3288 there's a hardware quirk where we need to assert the reset signal to the PHY when we get a remote wakeup on one of the two ports. Document this quirk in the bindings. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* dt-bindings: usb: dwc2: document the vbus-supply propertyMartin Blumenstingl2019-05-031-0/+4
| | | | | | | | | | | | | | | | | | | | | | | Various boards have an external VBUS supply regulator. This regulator depends on the current mode of the controller which is defined as: - dr_mode set to either "host" or "peripheral" (fixed value) - dr_mode set to "otg", based on the OTG status the dwc2 controller internally switches between "host" and "peripheral" mode (selection happens at runtime) Based on the current mode the regulator has to be enabled or disabled: - host: provide power to the connected USB device, thus the regulator has to be enabled - peripheral: the host device to which the controller is connected provides power, thus the regulator has to be disabled Add the dt-bindings documentation for this property so .dts authors know that this property exists and how it behaves. Fixes: 531ef5ebea9639 ("usb: dwc2: add support for host mode external vbus supply") Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* dt-bindings: usb: dwc2: Add Amlogic G12A DWC2 CompatibleNeil Armstrong2019-05-031-0/+1
| | | | | | | | | | Adds the specific compatible string for the DWC2 IP found in the Amlogic G12A SoC Family. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* dt-bindings: usb: dwc2: add description for px30Liang Chen2018-09-241-0/+1
| | | | | | | | This patch adds the compatible of dwc2 for PX30 SoCs. Signed-off-by: Liang Chen <cl@rock-chips.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
* dt-bindings: usb: fix the STM32F7 DWC2 OTG HS core bindingAmelie Delaunay2018-03-051-1/+1
| | | | | | | | | | | | | This patch fixes binding documentation for DWC2 controller in HS mode found on STMicroelectronics STM32F7 SoC. The v2 former patch [1] had been acked by Rob Herring, but v1 was merged. [1] https://patchwork.kernel.org/patch/9925575/ Fixes: 000777dadc7e ("dt-bindings: usb: Document the STM32F7xx DWC2 ...") Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* dt-bindings: usb: Document the STM32F7xx DWC2 USB OTG HS core bindingAmelie Delaunay2017-10-191-0/+2
| | | | | | | | This patch adds binding documentation for DWC2 controller in HS mode found on STMicroelectronics STM32F7xx SoC. Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* usb: dwc2: add support for the DWC2 controller on Meson8 SoCsMartin Blumenstingl2017-06-021-0/+1
| | | | | | | | | | | USB support in the Meson8 SoCs is provided by a DWC2 controller which works with the same settings as Meson8b and GXBB. Using the generic "snps,dwc2" binding results in an endless stream of "Overcurrent change detected" messages. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* dt-bindings: Document the STM32 USB OTG DWC2 core bindingBruno Herrera2017-04-031-0/+4
| | | | | | | | | This patch adds the documentation for STM32F4x9 USB OTG FS/HS compatible strings. Signed-off-by: Bruno Herrera <bruherrera@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
* usb: dwc2: add amcc,dwc-otg supportChristian Lamparter2016-11-181-0/+1
| | | | | | | | | | | | | | | | | | | | | | This patch adds support for the "amcc,usb-otg" device which is found in the PowerPC Canyonlands' dts. The device definition was added by: commit c89b3458d8cc ("powerpc/44x: Add USB DWC DTS entry to Canyonlands board") but without any driver support as the dwc2 driver wasn't available at that time. Note: The system can't use the generic "snps,dwc2" compatible because of the special ahbcfg configuration. The default GAHBCFG_HBSTLEN_INCR4 of snps,dwc2 can cause a system hang when the USB and SATA is used concurrently. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* usb: dwc2: Deprecate g-use-dma bindingJohn Youn2016-11-181-1/+3
| | | | | | | | | This is not needed as the gadget now fully supports DMA and it can autodetect it. This was initially added because gadget DMA mode was only partially implemented so could not be automatically enabled. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* Revert "Documentation: devicetree: dwc2: Deprecate g-tx-fifo-size"John Youn2016-10-181-4/+1
| | | | | | | | | | | | | | | This binding was deprecated due to commit aa381a7259c3 ("usb: dwc2: gadget: fix TX FIFO size and address initialization"). However that commit is now reverted, so also revert this commit. The binding is valid and shouldn't be deprecated. This reverts commit 65e1ff7f4b5b ("Documentation: devicetree: dwc2: Deprecate g-tx-fifo-size"). Signed-off-by: John Youn <johnyoun@synopsys.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* Merge tag 'armsoc-late' of ↵Linus Torvalds2016-10-081-0/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC late DT updates from Arnd Bergmann: "These updates have been kept in a separate branch mostly because they rely on updates to the respective clk drivers to keep the shared header files in sync. - The Renesas r8a7796 (R-Car M3-W) platform gets added, this is an automotive SoC similar to the ⅹ8a7795 chip we already support, but the dts changes rely on a clock driver change that has been merged for v4.9 through the clk tree. - The Amlogic meson-gxbb (S905) platform gains support for a few drivers merged through our tree, in particular the network and usb driver changes are required and included here, and also the clk tree changes. - The Allwinner platforms have seen a large-scale change to their clk drivers and the dts file updates must come after that. This includes the newly added Nextthing GR8 platform, which is derived from sun5i/A13. - Some integrator (arm32) changes rely on clk driver changes. - A single patch for lpc32xx has no such dependency but wasn't added until just before the merge window" * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (99 commits) ARM: dts: lpc32xx: add device node for IRAM on-chip memory ARM: dts: sun8i: Add accelerometer to polaroid-mid2407pxe03 ARM: dts: sun8i: enable UART1 for iNet D978 Rev2 board ARM: dts: sun8i: add pinmux for UART1 at PG dts: sun8i-h3: add I2C0-2 peripherals to H3 SOC dts: sun8i-h3: add pinmux definitions for I2C0-2 dts: sun8i-h3: associate exposed UARTs on Orange Pi Boards dts: sun8i-h3: split off RTS/CTS for UART1 in seperate pinmux dts: sun8i-h3: add pinmux definitions for UART2-3 ARM: dts: sun9i: a80-optimus: Disable EHCI1 ARM: dts: sun9i: cubieboard4: Add AXP806 PMIC device node and regulators ARM: dts: sun9i: a80-optimus: Add AXP806 PMIC device node and regulators ARM: dts: sun9i: cubieboard4: Declare AXP809 SW regulator as unused ARM: dts: sun9i: a80-optimus: Declare AXP809 SW regulator as unused ARM: dts: sun8i: Add touchscreen node for sun8i-a33-ga10h ARM: dts: sun8i: Add touchscreen node for sun8i-a23-polaroid-mid2809pxe04 ARM: dts: sun8i: Add touchscreen node for sun8i-a23-polaroid-mid2407pxe03 ARM: dts: sun8i: Add touchscreen node for sun8i-a23-inet86dz ARM: dts: sun8i: Add touchscreen node for sun8i-a23-gt90h ARM64: dts: meson-gxbb-vega-s95: Enable USB Nodes ...
| * usb: dwc2: add support for Meson8b and GXBB SoCsJerome Brunet2016-09-141-0/+2
| | | | | | | | | | | | | | | | | | | | Add compatible strings for amlogic Meson8b and GXBB SoCs with the corresponding configuration parameters. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
* | Documentation: devicetree: dwc2: Deprecate g-tx-fifo-sizeJohn Youn2016-09-061-1/+4
|/ | | | | | | | | | This property is not needed because the periodic fifos are not configurable. So it was incorrect to add this property in the first place. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* usb: dwc2: Add support for Lantiq ARX and XRX SoCsAntti Seppälä2016-03-041-0/+2
| | | | | | | | Add support for Lantiq ARX and XRX SoC families to the dwc2 driver. Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Antti Seppälä <a.seppala@gmail.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
* usb: dwc2: add support of hi6220Zhangfei Gao2015-12-151-0/+1
| | | | | | | | | Support hisilicon,hi6220-usb for HiKey board Acked-by: Rob Herring <robh@kernel.org> Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
* Documentation: dt-bindings: add dt binding info for dwc2 fifo resizingGregory Herrero2015-01-121-0/+3
| | | | | | | Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Gregory Herrero <gregory.herrero@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* Documentation: dt-bindings: add dt binding info for dwc2 g-use-dmaGregory Herrero2015-01-121-0/+1
| | | | | | | | | Indicate if gadget driver must use dma for usb transfers. Tested-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Gregory Herrero <gregory.herrero@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* Documentation: dt-bindings: add dt binding info for dwc2 dr_modeKever Yang2014-09-091-0/+2
| | | | | | | | Indicate that the generic dr_mode binding should be used for dwc2. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Documentation: dt-bindings: add dt binding info for Rockchip dwc2Kever Yang2014-09-091-0/+3
| | | | | | | | | | This add necessary dwc2 binding documentation for Rockchip socs: rk3066, rk3188 and rk3288 Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* dt: bindings: dwc2: fix required value for the phy-names propertyMatt Porter2014-05-281-1/+1
| | | | | | | | | | | | | | | | "7408484 usb: gadget: s3c-hsotg: enable generic phy support" introduces generic phy support to the dwc2.txt binding and the s3c-hsotg driver which implements support for the binding. The binding documentation incorrectly states that the phy-names property will be "device". The binding example, driver, and one dts user all implement the phy-names property as requiring "usb2-phy". Fix the dwc2.txt binding documentation to correctly specify "usb2-phy" as the appropriate value for phy-names. Reported-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Matt Porter <mporter@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org>
* Merge tag 'usb-3.14-rc1' of ↵Linus Torvalds2014-01-211-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB updates from Greg KH: "Here's the big USB pull request for 3.14-rc1 Lots of little things all over the place, and the usual USB gadget updates, and XHCI fixes (some for an issue reported by a lot of people). USB PHY updates as well as chipidea updates and fixes. All of these have been in the linux-next tree with no reported issues" * tag 'usb-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (318 commits) usb: chipidea: udc: using MultO at TD as real mult value for ISO-TX usb: chipidea: need to mask INT_STATUS when write otgsc usb: chipidea: put hw_phymode_configure before ci_usb_phy_init usb: chipidea: Fix Internal error: : 808 [#1] ARM related to STS flag usb: chipidea: imx: set CI_HDRC_IMX28_WRITE_FIX for imx28 usb: chipidea: add freescale imx28 special write register method usb: ehci: add freescale imx28 special write register method usb: core: check for valid id_table when using the RefId feature usb: cdc-wdm: resp_count can be 0 even if WDM_READ is set usb: core: bail out if user gives an unknown RefId when using new_id usb: core: allow a reference device for new_id usb: core: add sanity checks when using bInterfaceClass with new_id USB: image: correct spelling mistake in comment USB: c67x00: correct spelling mistakes in comments usb: delete non-required instances of include <linux/init.h> usb:hub set hub->change_bits when over-current happens Revert "usb: chipidea: imx: set CI_HDRC_IMX28_WRITE_FIX for imx28" xhci: Set scatter-gather limit to avoid failed block writes. xhci: Avoid infinite loop when sg urb requires too many trbs usb: gadget: remove unused variable in gr_queue_int() ...
* usb: dwc2: move device tree bindings doc to correct placePaul Zimmerman2014-01-141-0/+17
Now that the DWC2 driver has been moved to drivers/usb, move its bindings doc to the correct place Cc: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-12 06:08:54 +0100