1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
|
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/mfd/rohm,bd71847-pmic.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: ROHM BD71847 and BD71850 Power Management Integrated Circuit bindings
maintainers:
- Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
description: |
BD71847AMWV and BD71850MWV are programmable Power Management ICs for powering
single-core, dual-core, and quad-core SoCs such as NXP-i.MX 8M. It is
optimized for low BOM cost and compact solution footprint. BD71847MWV and
BD71850MWV integrate 6 Buck regulators and 6 LDOs.
Datasheets are available at
https://www.rohm.com/products/power-management/power-management-ic-for-system/industrial-consumer-applications/nxp-imx/bd71847amwv-product
https://www.rohm.com/products/power-management/power-management-ic-for-system/industrial-consumer-applications/nxp-imx/bd71850mwv-product
properties:
compatible:
enum:
- rohm,bd71847
- rohm,bd71850
reg:
description:
I2C slave address.
maxItems: 1
interrupts:
maxItems: 1
clocks:
maxItems: 1
"#clock-cells":
const: 0
# The BD71847 abd BD71850 support two different HW states as reset target
# states. States are called as SNVS and READY. At READY state all the PMIC
# power outputs go down and OTP is reload. At the SNVS state all other logic
# and external devices apart from the SNVS power domain are shut off. Please
# refer to NXP i.MX8 documentation for further information regarding SNVS
# state. When a reset is done via SNVS state the PMIC OTP data is not reload.
# This causes power outputs that have been under SW control to stay down when
# reset has switched power state to SNVS. If reset is done via READY state the
# power outputs will be returned to HW control by OTP loading. Thus the reset
# target state is set to READY by default. If SNVS state is used the boot
# crucial regulators must have the regulator-always-on and regulator-boot-on
# properties set in regulator node.
rohm,reset-snvs-powered:
description:
Transfer PMIC to SNVS state at reset.
type: boolean
# Configure the "short press" and "long press" timers for the power button.
# Values are rounded to what hardware supports
# Short-press:
# Shortest being 10ms, next 500ms and then multiple of 500ms up to 7,5s
# Long-press:
# Shortest being 10ms, next 1000ms and then multiple of 1000ms up to 15s
# If these properties are not present the existing # configuration (from
# bootloader or OTP) is not touched.
rohm,short-press-ms:
description:
Short press duration in milliseconds
enum:
- 10
- 500
- 1000
- 1500
- 2000
- 2500
- 3000
- 3500
- 4000
- 4500
- 5000
- 5500
- 6000
- 6500
- 7000
- 7500
rohm,long-press-ms:
description:
Long press duration in milliseconds
enum:
- 10
- 1000
- 2000
- 3000
- 4000
- 5000
- 6000
- 7000
- 8000
- 9000
- 10000
- 11000
- 12000
- 13000
- 14000
- 15000
regulators:
$ref: ../regulator/rohm,bd71847-regulator.yaml
description:
List of child nodes that specify the regulators.
required:
- compatible
- reg
- interrupts
- clocks
- "#clock-cells"
- regulators
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/leds/common.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
pmic: pmic@4b {
compatible = "rohm,bd71847";
reg = <0x4b>;
interrupt-parent = <&gpio1>;
interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
#clock-cells = <0>;
clocks = <&osc 0>;
rohm,reset-snvs-powered;
rohm,short-press-ms = <10>;
rohm,long-press-ms = <2000>;
regulators {
buck1: BUCK1 {
regulator-name = "buck1";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1300000>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <1250>;
rohm,dvs-run-voltage = <900000>;
rohm,dvs-idle-voltage = <850000>;
rohm,dvs-suspend-voltage = <800000>;
};
buck2: BUCK2 {
regulator-name = "buck2";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1300000>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <1250>;
rohm,dvs-run-voltage = <1000000>;
rohm,dvs-idle-voltage = <900000>;
};
buck3: BUCK3 {
regulator-name = "buck3";
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <1350000>;
regulator-boot-on;
};
buck4: BUCK4 {
regulator-name = "buck4";
regulator-min-microvolt = <2600000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
};
buck5: BUCK5 {
regulator-name = "buck5";
regulator-min-microvolt = <1605000>;
regulator-max-microvolt = <1995000>;
regulator-boot-on;
};
buck8: BUCK6 {
regulator-name = "buck6";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1400000>;
};
ldo1: LDO1 {
regulator-name = "ldo1";
regulator-min-microvolt = <1600000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
};
ldo2: LDO2 {
regulator-name = "ldo2";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <900000>;
regulator-boot-on;
};
ldo3: LDO3 {
regulator-name = "ldo3";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
};
ldo4: LDO4 {
regulator-name = "ldo4";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1800000>;
};
ldo5: LDO5 {
regulator-name = "ldo5";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <3300000>;
};
ldo6: LDO6 {
regulator-name = "ldo6";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1800000>;
};
};
};
};
|