blob: 6d4a3450e064a358c586fdd2cf8e5a1e54016e65 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
|
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/mtd/partitions/fixed-partitions.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Fixed partitions
description: |
This binding can be used on platforms which have strong conventions about
which portions of a flash are used for what purposes, but which don't use an
on-flash partition table such as RedBoot.
The partition table should be a node named "partitions". Partitions are then
defined as subnodes.
maintainers:
- Rafał Miłecki <rafal@milecki.pl>
properties:
compatible:
const: fixed-partitions
"#address-cells": true
"#size-cells": true
patternProperties:
"@[0-9a-f]+$":
description: node describing a single flash partition
type: object
properties:
reg:
description: partition's offset and size within the flash
maxItems: 1
label:
description: The label / name for this partition. If omitted, the label
is taken from the node name (excluding the unit address).
read-only:
description: This parameter, if present, is a hint that this partition
should only be mounted read-only. This is usually used for flash
partitions containing early-boot firmware images or data which should
not be clobbered.
type: boolean
lock:
description: Do not unlock the partition at initialization time (not
supported on all devices)
type: boolean
slc-mode:
description: This parameter, if present, allows one to emulate SLC mode
on a partition attached to an MLC NAND thus making this partition
immune to paired-pages corruptions
type: boolean
required:
- reg
required:
- "#address-cells"
- "#size-cells"
additionalProperties: true
examples:
- |
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0000000 0x100000>;
read-only;
};
uimage@100000 {
reg = <0x0100000 0x200000>;
};
};
- |
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <2>;
/* a 4 GiB partition */
partition@0 {
label = "filesystem";
reg = <0x00000000 0x1 0x00000000>;
};
};
- |
partitions {
compatible = "fixed-partitions";
#address-cells = <2>;
#size-cells = <2>;
/* an 8 GiB partition */
partition@0 {
label = "filesystem #1";
reg = <0x0 0x00000000 0x2 0x00000000>;
};
/* a 4 GiB partition */
partition@200000000 {
label = "filesystem #2";
reg = <0x2 0x00000000 0x1 0x00000000>;
};
};
- |
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "bootloader";
reg = <0x000000 0x100000>;
read-only;
};
firmware@100000 {
compatible = "brcm,trx";
label = "firmware";
reg = <0x100000 0xe00000>;
};
calibration@f00000 {
compatible = "fixed-partitions";
label = "calibration";
reg = <0xf00000 0x100000>;
ranges = <0 0xf00000 0x100000>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "wifi0";
reg = <0x000000 0x080000>;
};
partition@80000 {
label = "wifi1";
reg = <0x080000 0x080000>;
};
};
};
|
