1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/soc/qcom/qcom,pmic-glink.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm PMIC GLINK firmware interface for battery management, USB
Type-C and other things.
maintainers:
- Bjorn Andersson <andersson@kernel.org>
description:
The PMIC GLINK service, running on a coprocessor on some modern Qualcomm
platforms and implement USB Type-C handling and battery management. This
binding describes the component in the OS used to communicate with the
firmware and connect it's resources to those described in the Devicetree,
particularly the USB Type-C controllers relationship with USB and DisplayPort
components.
properties:
compatible:
oneOf:
- items:
- enum:
- qcom,qcm6490-pmic-glink
- qcom,sc8180x-pmic-glink
- qcom,sc8280xp-pmic-glink
- qcom,sm8350-pmic-glink
- qcom,sm8450-pmic-glink
- qcom,sm8550-pmic-glink
- const: qcom,pmic-glink
- items:
- enum:
- qcom,sm8650-pmic-glink
- qcom,x1e80100-pmic-glink
- const: qcom,sm8550-pmic-glink
- const: qcom,pmic-glink
'#address-cells':
const: 1
'#size-cells':
const: 0
orientation-gpios:
description: Array of input gpios for the Type-C connector orientation indication.
The GPIO indication is used to detect the orientation of the Type-C connector.
The array should contain a gpio entry for each PMIC Glink connector, in reg order.
It is defined that GPIO active level means "CC2" or Reversed/Flipped orientation.
patternProperties:
'^connector@\d$':
$ref: /schemas/connector/usb-connector.yaml#
required:
- reg
required:
- compatible
additionalProperties: false
examples:
- |+
pmic-glink {
compatible = "qcom,sc8280xp-pmic-glink", "qcom,pmic-glink";
#address-cells = <1>;
#size-cells = <0>;
connector@0 {
compatible = "usb-c-connector";
reg = <0>;
power-role = "dual";
data-role = "dual";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
endpoint {
remote-endpoint = <&usb_role>;
};
};
port@1 {
reg = <1>;
endpoint {
remote-endpoint = <&ss_phy_out>;
};
};
port@2 {
reg = <2>;
endpoint {
remote-endpoint = <&sbu_mux>;
};
};
};
};
};
...
|
