1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/sound/fsl,sai.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Freescale Synchronous Audio Interface (SAI).
maintainers:
- Shengjiu Wang <shengjiu.wang@nxp.com>
description: |
The SAI is based on I2S module that used communicating with audio codecs,
which provides a synchronous audio interface that supports fullduplex
serial interfaces with frame synchronization such as I2S, AC97, TDM, and
codec/DSP interfaces.
properties:
compatible:
oneOf:
- items:
- enum:
- fsl,imx6ul-sai
- fsl,imx7d-sai
- const: fsl,imx6sx-sai
- items:
- enum:
- fsl,imx8mm-sai
- fsl,imx8mn-sai
- fsl,imx8mp-sai
- const: fsl,imx8mq-sai
- items:
- enum:
- fsl,imx6sx-sai
- fsl,imx7ulp-sai
- fsl,imx8mq-sai
- fsl,imx8qm-sai
- fsl,imx8ulp-sai
- fsl,imx93-sai
- fsl,imx95-sai
- fsl,vf610-sai
reg:
maxItems: 1
clocks:
items:
- description: The ipg clock for register access
- description: master clock source 0 (obsoleted)
- description: master clock source 1
- description: master clock source 2
- description: master clock source 3
- description: PLL clock source for 8kHz series
- description: PLL clock source for 11kHz series
minItems: 4
clock-names:
oneOf:
- items:
- const: bus
- const: mclk0
- const: mclk1
- const: mclk2
- const: mclk3
- const: pll8k
- const: pll11k
minItems: 5
- items:
- const: bus
- const: mclk1
- const: mclk2
- const: mclk3
- const: pll8k
- const: pll11k
minItems: 4
power-domains:
maxItems: 1
dmas:
minItems: 1
maxItems: 2
dma-names:
minItems: 1
items:
- enum: [ rx, tx ]
- const: tx
interrupts:
items:
- description: receive and transmit interrupt
big-endian:
description: |
required if all the SAI registers are big-endian rather than little-endian.
type: boolean
fsl,dataline:
$ref: /schemas/types.yaml#/definitions/uint32-matrix
description: |
Configure the dataline. It has 3 value for each configuration
maxItems: 16
items:
items:
- description: format Default(0), I2S(1) or PDM(2)
enum: [0, 1, 2]
- description: dataline mask for 'rx'
- description: dataline mask for 'tx'
fsl,sai-mclk-direction-output:
description: SAI will output the SAI MCLK clock.
type: boolean
fsl,sai-synchronous-rx:
description: |
SAI will work in the synchronous mode (sync Tx with Rx) which means
both the transmitter and the receiver will send and receive data by
following receiver's bit clocks and frame sync clocks.
type: boolean
fsl,sai-asynchronous:
description: |
SAI will work in the asynchronous mode, which means both transmitter
and receiver will send and receive data by following their own bit clocks
and frame sync clocks separately.
If both fsl,sai-asynchronous and fsl,sai-synchronous-rx are absent, the
default synchronous mode (sync Rx with Tx) will be used, which means both
transmitter and receiver will send and receive data by following clocks
of transmitter.
type: boolean
fsl,shared-interrupt:
description: Interrupt is shared with other modules.
type: boolean
lsb-first:
description: |
Configures whether the LSB or the MSB is transmitted
first for the fifo data. If this property is absent,
the MSB is transmitted first as default, or the LSB
is transmitted first.
type: boolean
"#sound-dai-cells":
const: 0
description: optional, some dts node didn't add it.
allOf:
- $ref: dai-common.yaml#
- if:
required:
- fsl,sai-asynchronous
then:
properties:
fsl,sai-synchronous-rx: false
required:
- compatible
- reg
- clocks
- clock-names
- dmas
- dma-names
- interrupts
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/vf610-clock.h>
sai2: sai@40031000 {
compatible = "fsl,vf610-sai";
reg = <0x40031000 0x1000>;
interrupts = <86 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sai2_1>;
clocks = <&clks VF610_CLK_PLATFORM_BUS>,
<&clks VF610_CLK_SAI2>,
<&clks 0>, <&clks 0>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dma-names = "rx", "tx";
dmas = <&edma0 0 20>, <&edma0 0 21>;
big-endian;
lsb-first;
};
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/imx8mm-clock.h>
sai1: sai@30010000 {
compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
reg = <0x30010000 0x10000>;
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_SAI1_IPG>,
<&clk IMX8MM_CLK_DUMMY>,
<&clk IMX8MM_CLK_SAI1_ROOT>,
<&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
dmas = <&sdma2 0 2 0>, <&sdma2 1 2 0>;
dma-names = "rx", "tx";
fsl,dataline = <1 0xff 0xff 2 0xff 0x11>;
#sound-dai-cells = <0>;
};
|
