blob: 048933de2943e4b6e7c69515332a005d549a905f (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
|
// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
/*
* Device tree overlay for the WolfVision PF5 IO Expander board.
*
* Copyright (C) 2024 WolfVision GmbH.
*/
/dts-v1/;
/plugin/;
#include <dt-bindings/clock/rk3568-cru.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pinctrl/rockchip.h>
&{/} {
gmac0_clkin: external-gmac0-clock {
compatible = "fixed-clock";
clock-frequency = <50000000>;
clock-output-names = "gmac0_clkin";
#clock-cells = <0>;
};
usb_host_vbus: regulator-usb-host-vbus {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb_host_vbus_en>;
regulator-name = "usb_host_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc5v_in>;
};
vcc1v8_eth: regulator-vcc1v8-eth {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc1v8_eth_en>;
regulator-always-on;
regulator-boot-on;
regulator-name = "1v8_eth";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
vin-supply = <&vcc3v3_sys>;
};
vcc3v3_eth: regulator-vcc3v3-eth {
compatible = "regulator-fixed";
gpio = <&gpio0 RK_PC0 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&vcc3v3_eth_enn>;
regulator-always-on;
regulator-boot-on;
regulator-name = "3v3_eth";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vcc3v3_sys>;
};
};
&gmac0 {
assigned-clocks = <&cru SCLK_GMAC0_RX_TX>,
<&cru SCLK_GMAC0>;
assigned-clock-parents = <&cru SCLK_GMAC0_RMII_SPEED>,
<&gmac0_clkin>;
clock_in_out = "input";
phy-handle = <&dp83826>;
phy-mode = "rmii";
phy-supply = <&vcc3v3_eth>;
pinctrl-names = "default";
pinctrl-0 = <&gmac0_miim
&gmac0_clkinout
&gmac0_rx_er
&gmac0_rx_bus2
&gmac0_tx_bus2>;
status = "okay";
};
&mdio0 {
#address-cells = <1>;
#size-cells = <0>;
dp83826: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0x0>;
interrupt-parent = <&gpio0>;
interrupts = <RK_PD3 IRQ_TYPE_EDGE_FALLING>;
pinctrl-names = "default";
pinctrl-0 = <ð_wake_intn ð_phy_rstn>;
reset-assert-us = <1000>;
reset-deassert-us = <2000>;
reset-gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_LOW>;
wakeup-source;
};
};
&pinctrl {
ethernet {
eth_wake_intn: eth-wake-intn-pinctrl {
rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
};
eth_phy_rstn: eth-phy-rstn-pinctrl {
rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
};
vcc1v8_eth_en: vcc1v8-eth-en-pinctrl {
rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
};
vcc3v3_eth_enn: vcc3v3-eth-enn-pinctrl {
rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
usb {
usb_host_vbus_en: usb-host-vbus-en-pinctrl {
rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
&usb_host1_xhci {
maximum-speed = "high-speed";
phys = <&usb2phy0_host>;
phy-names = "usb2-phy";
status = "okay";
};
&usb2phy0_host {
phy-supply = <&usb_host_vbus>;
status = "okay";
};
|
