1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
|
/*
* itg3200_core.c -- support InvenSense ITG3200
* Digital 3-Axis Gyroscope driver
*
* Copyright (c) 2011 Christian Strobel <christian.strobel@iis.fraunhofer.de>
* Copyright (c) 2011 Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
* Copyright (c) 2012 Thorsten Nowak <thorsten.nowak@iis.fraunhofer.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* TODO:
* - Support digital low pass filter
* - Support power management
*/
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/i2c.h>
#include <linux/gpio.h>
#include <linux/slab.h>
#include <linux/stat.h>
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
#include <linux/iio/events.h>
#include <linux/iio/buffer.h>
#include <linux/iio/gyro/itg3200.h>
int itg3200_write_reg_8(struct iio_dev *indio_dev,
u8 reg_address, u8 val)
{
struct itg3200 *st = iio_priv(indio_dev);
return i2c_smbus_write_byte_data(st->i2c, 0x80 | reg_address, val);
}
int itg3200_read_reg_8(struct iio_dev *indio_dev,
u8 reg_address, u8 *val)
{
struct itg3200 *st = iio_priv(indio_dev);
int ret;
ret = i2c_smbus_read_byte_data(st->i2c, reg_address);
if (ret < 0)
return ret;
*val = ret;
return 0;
}
static int itg3200_read_reg_s16(struct iio_dev *indio_dev, u8 lower_reg_address,
int *val)
{
struct itg3200 *st = iio_priv(indio_dev);
struct i2c_client *client = st->i2c;
int ret;
s16 out;
struct i2c_msg msg[2] = {
{
.addr = client->addr,
.flags = client->flags,
.len = 1,
.buf = (char *)&lower_reg_address,
},
{
.addr = client->addr,
.flags = client->flags | I2C_M_RD,
.len = 2,
.buf = (char *)&out,
},
};
lower_reg_address |= 0x80;
ret = i2c_transfer(client->adapter, msg, 2);
be16_to_cpus(&out);
*val = out;
return (ret == 2) ? 0 : ret;
}
static int itg3200_read_raw(struct iio_dev *indio_dev,
const struct iio_chan_spec *chan,
int *val, int *val2, long info)
{
int ret = 0;
u8 reg;
switch (info) {
case IIO_CHAN_INFO_RAW:
reg = (u8)chan->address;
ret = itg3200_read_reg_s16(indio_dev, reg, val);
return IIO_VAL_INT;
case IIO_CHAN_INFO_SCALE:
*val = 0;
if (chan->type == IIO_TEMP)
*val2 = 1000000000/280;
else
*val2 = 1214142; /* (1 / 14,375) * (PI / 180) */
return IIO_VAL_INT_PLUS_NANO;
case IIO_CHAN_INFO_OFFSET:
/* Only the temperature channel has an offset */
*val = 23000;
return IIO_VAL_INT;
default:
return -EINVAL;
}
}
static ssize_t itg3200_read_frequency(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
int ret, sps;
u8 val;
ret = itg3200_read_reg_8(indio_dev, ITG3200_REG_DLPF, &val);
if (ret)
return ret;
sps = (val & ITG3200_DLPF_CFG_MASK) ? 1000 : 8000;
ret = itg3200_read_reg_8(indio_dev, ITG3200_REG_SAMPLE_RATE_DIV, &val);
if (ret)
return ret;
sps /= val + 1;
return sprintf(buf, "%d\n", sps);
}
static ssize_t itg3200_write_frequency(struct device *dev,
struct device_attribute *attr,
const char *buf,
size_t len)
{
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
unsigned val;
int ret;
u8 t;
ret = kstrtouint(buf, 10, &val);
if (ret)
return ret;
mutex_lock(&indio_dev->mlock);
ret = itg3200_read_reg_8(indio_dev, ITG3200_REG_DLPF, &t);
if (ret)
goto err_ret;
if (val == 0) {
ret = -EINVAL;
goto err_ret;
}
t = ((t & ITG3200_DLPF_CFG_MASK) ? 1000u : 8000u) / val - 1;
ret = itg3200_write_reg_8(indio_dev, ITG3200_REG_SAMPLE_RATE_DIV, t);
err_ret:
mutex_unlock(&indio_dev->mlock);
return ret ? ret : len;
}
/*
* Reset device and internal registers to the power-up-default settings
* Use the gyro clock as reference, as suggested by the datasheet
*/
static int itg3200_reset(struct iio_dev *indio_dev)
{
struct itg3200 *st = iio_priv(indio_dev);
int ret;
dev_dbg(&st->i2c->dev, "reset device");
ret = itg3200_write_reg_8(indio_dev,
ITG3200_REG_POWER_MANAGEMENT,
ITG3200_RESET);
if (ret) {
dev_err(&st->i2c->dev, "error resetting device");
goto error_ret;
}
/* Wait for PLL (1ms according to datasheet) */
udelay(1500);
ret = itg3200_write_reg_8(indio_dev,
ITG3200_REG_IRQ_CONFIG,
ITG3200_IRQ_ACTIVE_HIGH |
ITG3200_IRQ_PUSH_PULL |
ITG3200_IRQ_LATCH_50US_PULSE |
ITG3200_IRQ_LATCH_CLEAR_ANY);
if (ret)
dev_err(&st->i2c->dev, "error init device");
error_ret:
return ret;
}
/* itg3200_enable_full_scale() - Disables the digital low pass filter */
static int itg3200_enable_full_scale(struct iio_dev *indio_dev)
{
u8 val;
int ret;
ret = itg3200_read_reg_8(indio_dev, ITG3200_REG_DLPF, &val);
if (ret)
goto err_ret;
val |= ITG3200_DLPF_FS_SEL_2000;
return itg3200_write_reg_8(indio_dev, ITG3200_REG_DLPF, val);
err_ret:
return ret;
}
static int itg3200_initial_setup(struct iio_dev *indio_dev)
{
struct itg3200 *st = iio_priv(indio_dev);
int ret;
u8 val;
ret = itg3200_read_reg_8(indio_dev, ITG3200_REG_ADDRESS, &val);
if (ret)
goto err_ret;
if (((val >> 1) & 0x3f) != 0x34) {
dev_err(&st->i2c->dev, "invalid reg value 0x%02x", val);
ret = -ENXIO;
goto err_ret;
}
ret = itg3200_reset(indio_dev);
if (ret)
goto err_ret;
ret = itg3200_enable_full_scale(indio_dev);
err_ret:
return ret;
}
#define ITG3200_ST \
{ .sign = 's', .realbits = 16, .storagebits = 16, .endianness = IIO_BE }
#define ITG3200_GYRO_CHAN(_mod) { \
.type = IIO_ANGL_VEL, \
.modified = 1, \
.channel2 = IIO_MOD_ ## _mod, \
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
.address = ITG3200_REG_GYRO_ ## _mod ## OUT_H, \
.scan_index = ITG3200_SCAN_GYRO_ ## _mod, \
.scan_type = ITG3200_ST, \
}
static const struct iio_chan_spec itg3200_channels[] = {
{
.type = IIO_TEMP,
.channel2 = IIO_NO_MOD,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
BIT(IIO_CHAN_INFO_SCALE),
.address = ITG3200_REG_TEMP_OUT_H,
.scan_index = ITG3200_SCAN_TEMP,
.scan_type = ITG3200_ST,
},
ITG3200_GYRO_CHAN(X),
ITG3200_GYRO_CHAN(Y),
ITG3200_GYRO_CHAN(Z),
IIO_CHAN_SOFT_TIMESTAMP(ITG3200_SCAN_ELEMENTS),
};
/* IIO device attributes */
static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO, itg3200_read_frequency,
itg3200_write_frequency);
static struct attribute *itg3200_attributes[] = {
&iio_dev_attr_sampling_frequency.dev_attr.attr,
NULL
};
static const struct attribute_group itg3200_attribute_group = {
.attrs = itg3200_attributes,
};
static const struct iio_info itg3200_info = {
.attrs = &itg3200_attribute_group,
.read_raw = &itg3200_read_raw,
.driver_module = THIS_MODULE,
};
static const unsigned long itg3200_available_scan_masks[] = { 0xffffffff, 0x0 };
static int itg3200_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
int ret;
struct itg3200 *st;
struct iio_dev *indio_dev;
dev_dbg(&client->dev, "probe I2C dev with IRQ %i", client->irq);
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*st));
if (!indio_dev)
return -ENOMEM;
st = iio_priv(indio_dev);
i2c_set_clientdata(client, indio_dev);
st->i2c = client;
indio_dev->dev.parent = &client->dev;
indio_dev->name = client->dev.driver->name;
indio_dev->channels = itg3200_channels;
indio_dev->num_channels = ARRAY_SIZE(itg3200_channels);
indio_dev->available_scan_masks = itg3200_available_scan_masks;
indio_dev->info = &itg3200_info;
indio_dev->modes = INDIO_DIRECT_MODE;
ret = itg3200_buffer_configure(indio_dev);
if (ret)
return ret;
if (client->irq) {
ret = itg3200_probe_trigger(indio_dev);
if (ret)
goto error_unconfigure_buffer;
}
ret = itg3200_initial_setup(indio_dev);
if (ret)
goto error_remove_trigger;
ret = iio_device_register(indio_dev);
if (ret)
goto error_remove_trigger;
return 0;
error_remove_trigger:
if (client->irq)
itg3200_remove_trigger(indio_dev);
error_unconfigure_buffer:
itg3200_buffer_unconfigure(indio_dev);
return ret;
}
static int itg3200_remove(struct i2c_client *client)
{
struct iio_dev *indio_dev = i2c_get_clientdata(client);
iio_device_unregister(indio_dev);
if (client->irq)
itg3200_remove_trigger(indio_dev);
itg3200_buffer_unconfigure(indio_dev);
return 0;
}
static const struct i2c_device_id itg3200_id[] = {
{ "itg3200", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, itg3200_id);
static struct i2c_driver itg3200_driver = {
.driver = {
.owner = THIS_MODULE,
.name = "itg3200",
},
.id_table = itg3200_id,
.probe = itg3200_probe,
.remove = itg3200_remove,
};
module_i2c_driver(itg3200_driver);
MODULE_AUTHOR("Christian Strobel <christian.strobel@iis.fraunhofer.de>");
MODULE_DESCRIPTION("ITG3200 Gyroscope I2C driver");
MODULE_LICENSE("GPL v2");
|