- (stevesk) Create contrib/cygwin/ directory; patch from

   Corinna Vinschen <vinschen@redhat.com>

2 files changed, 461 insertions, 0 deletions

diff --git a/contrib/cygwin/README b/contrib/cygwin/README
new file mode 100644
index 000000000..8c9d0bb73
--- /dev/null
+++ b/contrib/cygwin/README
@@ -0,0 +1,137 @@
+This package is the actual port of OpenSSH to Cygwin 1.1.
+
+===========================================================================
+Important change since 2.3.0p1:
+
+When using `ntea' or `ntsec' you now have to care for the ownership
+and permission bits of your host key files and your private key files.
+The host key files have to be owned by the NT account which starts
+sshd. The user key files have to be owned by the user. The permission
+bits of the private key files (host and user) have to be at least
+rw------- (0600)!
+
+Note that this is forced under `ntsec' only if the files are on a NTFS
+filesystem (which is recommended) due to the lack of any basic security
+features of the FAT/FAT32 filesystems.
+===========================================================================
+
+Since this package is part of the base distribution now, the location
+of the files has changed from /usr/local to /usr. The global configuration
+files are in /etc now.
+
+If you are installing OpenSSH the first time, you can generate
+global config files, server keys and your own user keys by running
+   
+   /usr/bin/ssh-config
+
+If you are updating your installation you may run the above ssh-config
+as well to move your configuration files to the new location and to
+erase the files at the old location.
+
+Be sure to start the new ssh-config when updating!
+
+Note that this binary archive doesn't contain default config files in /etc.
+That files are only created if ssh-config is started.
+
+Install sshd as daemon via SRVANY.EXE (recommended on NT/W2K), via inetd
+(results in very slow deamon startup!) or from the command line (recommended
+on 9X/ME).
+
+If starting via inetd, copy sshd to eg. /usr/sbin/in.sshd and add the
+following line to your inetd.conf file:
+
+sshd stream tcp nowait root /usr/sbin/in.sshd sshd -i
+
+Moreover you'll have to add the following line to your
+${SYSTEMROOT}/system32/drivers/etc/services file:
+
+   sshd         22/tcp          #SSH daemon
+
+Authentication to sshd is possible in one of two ways.
+You'll have to decide before starting sshd!
+
+- If you want to authenticate via RSA and you want to login to that
+  machine to exactly one user account you can do so by running sshd
+  under that user account. You must change /etc/sshd_config
+  to contain the following:
+
+  RSAAuthentication yes
+
+  Moreover it's possible to use rhosts and/or rhosts with
+  RSA authentication by setting the following in sshd_config:
+
+  RhostsAuthentication yes
+  RhostsRSAAuthentication yes
+
+- If you want to be able to login to different user accounts you'll
+  have to start sshd under system account or any other account that
+  is able to switch user context. Note that administrators are _not_
+  able to do that by default! You'll have to give the following
+  special user rights to the user:
+  "Act as part of the operating system"
+  "Replace process level token"
+  "Increase quotas"
+  and if used via service manager
+  "Logon as a service".
+
+  The system account does of course own that user rights by default.
+
+  Unfortunately, if you choose that way, you can only logon with
+  NT password authentification and you should change
+  /etc/sshd_config to contain the following:
+
+    PasswordAuthentication yes
+    RhostsAuthentication no
+    RhostsRSAAuthentication no
+    RSAAuthentication no
+
+  However you can login to the user which has started sshd with
+  RSA authentication anyway. If you want that, change the RSA
+  authentication setting back to "yes":
+     
+    RSAAuthentication yes
+
+You may use all features of the CYGWIN=ntsec setting the same
+way as they are used by the `login' port on sources.redhat.com:
+
+  The pw_gecos field may contain an additional field, that begins
+  with (upper case!) "U-", followed by the domain and the username
+  separated by a backslash.
+  CAUTION: The SID _must_ remain the _last_ field in pw_gecos!
+  BTW: The field separator in pw_gecos is the comma.
+  The username in pw_name itself may be any nice name:
+
+    domuser::1104:513:John Doe,U-domain\user,S-1-5-21-...
+
+  Now you may use `domuser' as your login name with telnet!
+  This is possible additionally for local users, if you don't like
+  your NT login name ;-) You only have to leave out the domain:
+
+    locuser::1104:513:John Doe,U-user,S-1-5-21-...
+
+V2 server and user keys are generated by `ssh-config'. If you want to
+create DSA keys by yourself, call ssh-keygen with `-d' option.
+
+DSA authentication similar to RSA:
+    Add keys to ~/.ssh/authorized_keys2
+Interop. w/ ssh.com dsa-keys:
+    ssh-keygen -f /key/from/ssh.com -X >> ~/.ssh/authorized_keys2
+and vice versa:
+    ssh-keygen -f /privatekey/from/openssh -x > ~/.ssh2/mykey.pub
+    echo Key mykey.pub >> ~/.ssh2/authorization
+
+If you want to build from source, the following options to
+configure are used for the Cygwin binary distribution:
+
+--prefix=/usr --sysconfdir=/etc --libexecdir='${exec_prefix}/sbin
+
+You must have installed the zlib, openssl and regex packages to
+be able to build OpenSSH!
+
+Please send requests, error reports etc. to cygwin@sources.redhat.com.
+
+Have fun,
+
+Corinna Vinschen <vinschen@cygnus.com>
+Cygwin Developer
+Red Hat Inc.
diff --git a/contrib/cygwin/ssh-config b/contrib/cygwin/ssh-config
new file mode 100755
index 000000000..20c8cceb0
--- /dev/null
+++ b/contrib/cygwin/ssh-config
@@ -0,0 +1,324 @@
+#!/bin/sh
+#
+# ssh-config, Copyright 2000, Red Hat Inc.
+#
+# This file is part of the Cygwin port of OpenSSH.
+
+# set -x
+
+# Subdirectory where the new package is being installed
+PREFIX=/usr
+
+# Directory where the config files are stored
+SYSCONFDIR=/etc
+
+# Subdirectory where an old package might be installed
+OLDPREFIX=/usr/local
+OLDSYSCONFDIR=${OLDPREFIX}/etc
+
+request()
+{
+  answer=""
+  while [ "X${answer}" != "Xyes" -a "X${answer}" != "Xno" ]
+  do
+    echo -n "$1 (yes/no) "
+    read answer
+  done
+  if [ "X${answer}" = "Xyes" ]
+  then
+    return 0
+  else
+    return 1
+  fi
+}
+
+# Check for running ssh/sshd processes first. Refuse to do anything while
+# some ssh processes are still running
+
+if ps -ef | grep -v grep | grep -q ssh
+then
+  echo
+  echo "There are still ssh processes running. Please shut them down first."
+  echo
+  exit 1
+fi
+
+# Check for ${SYSCONFDIR} directory
+
+if [ -e "${SYSCONFDIR}" -a ! -d "${SYSCONFDIR}" ]
+then
+  echo
+  echo "${SYSCONFDIR} is existant but not a directory."
+  echo "Cannot create global configuration files."
+  echo
+  exit 1
+fi
+
+# Create it if necessary
+
+if [ ! -e "${SYSCONFDIR}" ]
+then
+  mkdir "${SYSCONFDIR}"
+  if [ ! -e "${SYSCONFDIR}" ]
+  then
+    echo
+    echo "Creating ${SYSCONFDIR} directory failed"
+    echo
+    exit 1
+  fi
+fi
+
+# Check for an old installation in ${OLDPREFIX} unless ${OLDPREFIX} isn't
+# the same as ${PREFIX}
+
+if [ "${OLDPREFIX}" != "${PREFIX}" ]
+then
+  if [ -f "${OLDPREFIX}/sbin/sshd" ]
+  then
+    echo
+    echo "You seem to have an older installation in ${OLDPREFIX}."
+    echo
+    # Check if old global configuration files exist
+    if [ -f "${OLDSYSCONFDIR}/ssh_host_key" ]
+    then
+      if request "Do you want to copy your config files to your new installation?"
+      then
+        cp -f ${OLDSYSCONFDIR}/ssh_host_key ${SYSCONFDIR}
+        cp -f ${OLDSYSCONFDIR}/ssh_host_key.pub ${SYSCONFDIR}
+        cp -f ${OLDSYSCONFDIR}/ssh_host_dsa_key ${SYSCONFDIR}
+        cp -f ${OLDSYSCONFDIR}/ssh_host_dsa_key.pub ${SYSCONFDIR}
+        cp -f ${OLDSYSCONFDIR}/ssh_config ${SYSCONFDIR}
+        cp -f ${OLDSYSCONFDIR}/sshd_config ${SYSCONFDIR}
+      fi
+    fi
+    if request "Do you want to erase your old installation?"
+    then
+      rm -f ${OLDPREFIX}/bin/ssh.exe
+      rm -f ${OLDPREFIX}/bin/ssh-config
+      rm -f ${OLDPREFIX}/bin/scp.exe
+      rm -f ${OLDPREFIX}/bin/ssh-add.exe
+      rm -f ${OLDPREFIX}/bin/ssh-agent.exe
+      rm -f ${OLDPREFIX}/bin/ssh-keygen.exe
+      rm -f ${OLDPREFIX}/bin/slogin
+      rm -f ${OLDSYSCONFDIR}/ssh_host_key
+      rm -f ${OLDSYSCONFDIR}/ssh_host_key.pub
+      rm -f ${OLDSYSCONFDIR}/ssh_host_dsa_key
+      rm -f ${OLDSYSCONFDIR}/ssh_host_dsa_key.pub
+      rm -f ${OLDSYSCONFDIR}/ssh_config
+      rm -f ${OLDSYSCONFDIR}/sshd_config
+      rm -f ${OLDPREFIX}/man/man1/ssh.1
+      rm -f ${OLDPREFIX}/man/man1/scp.1
+      rm -f ${OLDPREFIX}/man/man1/ssh-add.1
+      rm -f ${OLDPREFIX}/man/man1/ssh-agent.1
+      rm -f ${OLDPREFIX}/man/man1/ssh-keygen.1
+      rm -f ${OLDPREFIX}/man/man1/slogin.1
+      rm -f ${OLDPREFIX}/man/man8/sshd.8
+      rm -f ${OLDPREFIX}/sbin/sshd.exe
+      rm -f ${OLDPREFIX}/sbin/sftp-server.exe
+    fi
+  fi
+fi
+
+# First generate host keys if not already existing
+
+if [ ! -f "${SYSCONFDIR}/ssh_host_key" ]
+then
+  echo "Generating ${SYSCONFDIR}/ssh_host_key"
+  ssh-keygen -f ${SYSCONFDIR}/ssh_host_key -N ''
+fi
+
+if [ ! -f "${SYSCONFDIR}/ssh_host_dsa_key" ]
+then
+  echo "Generating ${SYSCONFDIR}/ssh_host_dsa_key"
+  ssh-keygen -d -f ${SYSCONFDIR}/ssh_host_dsa_key -N ''
+fi
+
+# Check if ssh_config exists. If yes, ask for overwriting
+
+if [ -f "${SYSCONFDIR}/ssh_config" ]
+then
+  if request "Overwrite existing ${SYSCONFDIR}/ssh_config file?"
+  then
+    rm -f "${SYSCONFDIR}/ssh_config"
+    if [ -f "${SYSCONFDIR}/ssh_config" ]
+    then
+      echo "Can't overwrite. ${SYSCONFDIR}/ssh_config is write protected."
+    fi
+  fi
+fi
+
+# Create default ssh_config from here script
+
+if [ ! -f "${SYSCONFDIR}/ssh_config" ]
+then
+  echo "Creating default ${SYSCONFDIR}/ssh_config file"
+  cat > ${SYSCONFDIR}/ssh_config << EOF
+# This is ssh client systemwide configuration file.  This file provides 
+# defaults for users, and the values can be changed in per-user configuration
+# files or on the command line.
+
+# Configuration data is parsed as follows:
+#  1. command line options
+#  2. user-specific file
+#  3. system-wide file
+# Any configuration value is only changed the first time it is set.
+# Thus, host-specific definitions should be at the beginning of the
+# configuration file, and defaults at the end.
+
+# Site-wide defaults for various options
+
+# Host *
+#   ForwardAgent yes
+#   ForwardX11 yes
+#   RhostsAuthentication yes
+#   RhostsRSAAuthentication yes
+#   RSAAuthentication yes
+#   PasswordAuthentication yes
+#   FallBackToRsh no
+#   UseRsh no
+#   BatchMode no
+#   CheckHostIP yes
+#   StrictHostKeyChecking no
+#   IdentityFile ~/.ssh/identity
+#   Port 22
+#   Protocol 2,1
+#   Cipher 3des
+#   EscapeChar ~
+
+# Be paranoid by default
+Host *
+        ForwardAgent no
+        ForwardX11 no
+        FallBackToRsh no
+EOF
+fi
+
+# Check if sshd_config exists. If yes, ask for overwriting
+
+if [ -f "${SYSCONFDIR}/sshd_config" ]
+then
+  if request "Overwrite existing ${SYSCONFDIR}/sshd_config file?"
+  then
+    rm -f "${SYSCONFDIR}/sshd_config"
+    if [ -f "${SYSCONFDIR}/sshd_config" ]
+    then
+      echo "Can't overwrite. ${SYSCONFDIR}/sshd_config is write protected."
+    fi
+  fi
+fi
+
+# Create default sshd_config from here script
+
+if [ ! -f "${SYSCONFDIR}/sshd_config" ]
+then
+  echo "Creating default ${SYSCONFDIR}/sshd_config file"
+  cat > ${SYSCONFDIR}/sshd_config << EOF
+# This is ssh server systemwide configuration file.
+
+Port 22
+#Protocol 2,1
+ListenAddress 0.0.0.0
+#ListenAddress ::
+#HostKey /etc/ssh_host_key
+ServerKeyBits 768
+LoginGraceTime 600
+KeyRegenerationInterval 3600
+PermitRootLogin yes
+#
+# Don't read ~/.rhosts and ~/.shosts files
+IgnoreRhosts yes
+# Uncomment if you don't trust ~/.ssh/known_hosts for RhostsRSAAuthentication
+#IgnoreUserKnownHosts yes
+StrictModes yes
+X11Forwarding no
+X11DisplayOffset 10
+PrintMotd yes
+KeepAlive yes
+
+# Logging
+SyslogFacility AUTH
+LogLevel INFO
+#obsoletes QuietMode and FascistLogging
+
+RhostsAuthentication no
+#
+# For this to work you will also need host keys in /etc/ssh_known_hosts
+RhostsRSAAuthentication no
+
+# To install for logon to different user accounts change to "no" here
+RSAAuthentication yes
+
+# To install for logon to different user accounts change to "yes" here
+PasswordAuthentication no
+
+PermitEmptyPasswords no
+
+CheckMail no
+UseLogin no
+
+#Uncomment if you want to enable sftp
+#Subsystem      sftp    /usr/sbin/sftp-server
+#MaxStartups 10:30:60
+EOF
+fi
+
+# Ask user if user identity should be generated
+
+if [ "X${HOME}" = "X" ]
+then
+  echo '$HOME is nonexistant. Cannot create user identity files.'
+  exit 1
+fi
+
+if [ ! -d "${HOME}" ]
+then
+  echo '$HOME is not a valid directory. Cannot create user identity files.'
+  exit 1
+fi
+
+# If HOME is the root dir, set HOME to empty string to avoid error messages
+# in subsequent parts of that script.
+if [ "X${HOME}" = "X/" ]
+then
+  HOME=''
+fi
+
+if [ -e "${HOME}/.ssh" -a ! -d "${HOME}/.ssh" ]
+then
+  echo '$HOME/.ssh is existant but not a directory. Cannot create user identity files.'
+  exit 1
+fi
+
+if [ ! -e "${HOME}/.ssh" ]
+then
+  mkdir "${HOME}/.ssh"
+  if [ ! -e "${HOME}/.ssh" ]
+  then
+    echo "Creating users ${HOME}/.ssh directory failed"
+    exit 1
+  fi
+fi
+
+if [ ! -f "${HOME}/.ssh/identity" ]
+then
+  if request "Shall I create an RSA identity file for you?"
+  then
+    echo "Generating ${HOME}/.ssh/identity"
+    ssh-keygen -f "${HOME}/.ssh/identity"
+  fi
+fi
+
+if [ ! -f "${HOME}/.ssh/id_dsa" ]
+then
+  if request "Shall I create an DSA identity file for you? (yes/no) "
+  then
+    echo "Generating ${HOME}/.ssh/id_dsa"
+    ssh-keygen -d -f "${HOME}/.ssh/id_dsa"
+  fi
+fi
+
+echo
+echo "Note: If you have used sshd as service or from inetd, don't forget to"
+echo "      change the path to sshd.exe in the service entry or in inetd.conf."
+echo
+echo "Configuration finished. Have fun!"