path: root/doc/man3/SSL_CONF_cmd.pod

=pod

=head1 NAME

SSL_CONF_cmd_value_type,
SSL_CONF_cmd - send configuration command

=head1 SYNOPSIS

 #include <openssl/ssl.h>

 int SSL_CONF_cmd(SSL_CONF_CTX *ctx, const char *option, const char *value);
 int SSL_CONF_cmd_value_type(SSL_CONF_CTX *ctx, const char *option);

=head1 DESCRIPTION

The function SSL_CONF_cmd() performs configuration operation B<option> with
optional parameter B<value> on B<ctx>. Its purpose is to simplify application
configuration of B<SSL_CTX> or B<SSL> structures by providing a common
framework for command line options or configuration files.

SSL_CONF_cmd_value_type() returns the type of value that B<option> refers to.

=head1 SUPPORTED COMMAND LINE COMMANDS

Currently supported B<option> names for command lines (i.e. when the
flag B<SSL_CONF_CMDLINE> is set) are listed below. Note: all B<option> names
are case sensitive. Unless otherwise stated commands can be used by
both clients and servers and the B<value> parameter is not used. The default
prefix for command line commands is B<-> and that is reflected below.

=over 4

=item B<-bugs>

Various bug workarounds are set, same as setting B<SSL_OP_ALL>.

=item B<-no_comp>

Disables support for SSL/TLS compression, same as setting
B<SSL_OP_NO_COMPRESSION>.
As of OpenSSL 1.1.0, compression is off by default.

=item B<-comp>

Enables support for SSL/TLS compression, same as clearing
B<SSL_OP_NO_COMPRESSION>.
This command was introduced in OpenSSL 1.1.0.
As of OpenSSL 1.1.0, compression is off by default.

=item B<-no_ticket>

Disables support for session tickets, same as setting B<SSL_OP_NO_TICKET>.

=item B<-serverpref>

Use server and not client preference order when determining which cipher suite,
signature algorithm or elliptic curve to use for an incoming connection.
Equivalent to B<SSL_OP_CIPHER_SERVER_PREFERENCE>. Only used by servers.

=item B<-legacyrenegotiation>

permits the use of unsafe legacy renegotiation. Equivalent to setting
B<SSL_OP_ALLOW_UNSAFE_LEGACY_RENEGOTIATION>.

=item B<-no_renegotiation>

Disables all attempts at renegotiation in TLSv1.2 and earlier, same as setting
B<SSL_OP_NO_RENEGOTIATION>.

=item B<-no_resumption_on_reneg>

set SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION flag. Only used by servers.

=item B<-legacy_server_connect>, B<-no_legacy_server_connect>

permits or prohibits the use of unsafe legacy renegotiation for OpenSSL
clients only. Equivalent to setting or clearing B<SSL_OP_LEGACY_SERVER_CONNECT>.
Set by default.

=item B<-prioritize_chacha>

Prioritize ChaCha ciphers when the client has a ChaCha20 cipher at the top of
its preference list. This usually indicates a client without AES hardware
acceleration (e.g. mobile) is in use. Equivalent to B<SSL_OP_PRIORITIZE_CHACHA>.
Only used by servers. Requires B<-serverpref>.

=item B<-allow_no_dhe_kex>

In TLSv1.3 allow a non-(ec)dhe based key exchange mode on resumption. This means
that there will be no forward secrecy for the resumed session.

=item B<-strict>

enables strict mode protocol handling. Equivalent to setting
B<SSL_CERT_FLAG_TLS_STRICT>.

=item B<-sigalgs> I<algs>

This sets the supported signature algorithms for TLSv1.2 and TLSv1.3.
For clients this value is used directly for the supported signature
algorithms extension. For servers it is used to determine which signature
algorithms to support.

The B<algs> argument should be a colon separated list of signature
algorithms in order of decreasing preference of the form B<algorithm+hash>
or B<signature_scheme>. B<algorithm> is one of B<RSA>, B<DSA> or B<ECDSA> and
B<hash> is a supported algorithm OID short name such as B<SHA1>, B<SHA224>,
B<SHA256>, B<SHA384> of B<SHA512>.  Note: algorithm and hash names are case
sensitive.  B<signature_scheme> is one of the signature schemes defined in
TLSv1.3, specified using the IETF name, e.g., B<ecdsa_secp256r1_sha256>,
B<ed25519>, or B<rsa_pss_pss_sha256>.

If this option is not set then all signature algorithms supported by the
OpenSSL library are permissible.

Note: algorithms which specify a PKCS#1 v1.5 signature scheme (either by
using B<RSA> as the B<algorithm> or by using one of the B<rsa_pkcs1_*>
identifiers) are ignored in TLSv1.3 and will not be negotiated.

=item B<-client_sigalgs> I<algs>

This sets the supported signature algorithms associated with client
authentication for TLSv1.2 and TLSv1.3.  For servers the B<algs> is used
in the B<signature_algorithms> field of a B<CertificateRequest> message.
For clients it is used to determine which signature algorithm to use with
the client certificate.  If a server does not request a certificate this
option has no effect.

The syntax of B<algs> is identical to B<-sigalgs>. If not set, then the
value set for B<-sigalgs> will be used instead.

=item B<-groups> I<groups>

This sets the supported groups. For clients, the groups are sent using
the supported groups extension. For servers, it is used to determine which
group to use. This setting affects groups used for signatures (in TLSv1.2
and earlier) and key exchange. The first group listed will also be used
for the B<key_share> sent by a client in a TLSv1.3 B<ClientHello>.

The B<groups> argument is a colon separated list of groups. The group can
be either the B<NIST> name (e.g. B<P-256>), some other commonly used name
where applicable (e.g. B<X25519>, B<ffdhe2048>) or an OpenSSL OID name
(e.g B<prime256v1>). Group names are case sensitive. The list should be
in order of preference with the most preferred group first.

Currently supported groups for B<TLSv1.3> are B<P-256>, B<P-384>, B<P-521>,
B<X25519>, B<X448>, B<ffdhe2048>, B<ffdhe3072>, B<ffdhe4096>, B<ffdhe6144>,
B<ffdhe8192>.

=item B<-curves> I<groups>

This is a synonym for the B<-groups> command.

=item B<-named_curve> I<curve>

This sets the temporary curve used for ephemeral ECDH modes. Only used
by servers.

The B<groups> argument is a curve name or the special value B<auto> which
picks an appropriate curve based on client and server preferences. The
curve can be either the B<NIST> name (e.g. B<P-256>) or an OpenSSL OID name
(e.g B<prime256v1>). Curve names are case sensitive.

=item B<-cipher> I<ciphers>

Sets the TLSv1.2 and below ciphersuite list to B<ciphers>. This list will be
combined with any configured TLSv1.3 ciphersuites. Note: syntax checking
of B<ciphers> is currently not performed unless a B<SSL> or B<SSL_CTX>
structure is associated with B<ctx>.

=item B<-ciphersuites> I<1.3ciphers>

Sets the available ciphersuites for TLSv1.3 to value. This is a
colon-separated list of TLSv1.3 ciphersuite names in order of preference. This
list will be combined any configured TLSv1.2 and below ciphersuites.
See L<openssl-ciphers(1)> for more information.

=item B<-min_protocol> I<minprot>, B<-max_protocol> I<maxprot>

Sets the minimum and maximum supported protocol.  Currently supported
protocol values are B<SSLv3>, B<TLSv1>, B<TLSv1.1>, B<TLSv1.2>, B<TLSv1.3>
for TLS and B<DTLSv1>, B<DTLSv1.2> for DTLS, and B<None> for no limit.
If either bound is not specified then only the other bound applies,
if specified.  To restrict the supported protocol versions use these
commands rather than the deprecated alternative commands below.

=item B<-record_padding> I<padding>

Attempts to pad TLSv1.3 records so that they are a multiple of B<padding>
in length on send. A B<padding> of 0 or 1 turns off padding. Otherwise,
the B<padding> must be >1 or <=16384.

=item B<-debug_broken_protocol>

Ignored.

=item B<-no_middlebox>

Turn off "middlebox compatibility", as described below.

=back

=head2 Additional Options

The following options are accepted by SSL_CONF_cmd(), but are not
processed by the OpenSSL commands.

=over 4

=item B<-cert> I<file>

Attempts to use B<file> as the certificate for the appropriate context. It
currently uses SSL_CTX_use_certificate_chain_file() if an B<SSL_CTX>
structure is set or SSL_use_certificate_file() with filetype PEM if an
B<SSL> structure is set. This option is only supported if certificate
operations are permitted.

=item B<-key> I<file>

Attempts to use B<file> as the private key for the appropriate context. This
option is only supported if certificate operations are permitted. Note:
if no B<-key> option is set then a private key is not loaded unless the
flag B<SSL_CONF_FLAG_REQUIRE_PRIVATE> is set.

=item B<-dhparam> I<file>

Attempts to use B<file> as the set of temporary DH parameters for
the appropriate context. This option is only supported if certificate
operations are permitted.

=item B<-no_ssl3>, B<-no_tls1>, B<-no_tls1_1>, B<-no_tls1_2>, B<-no_tls1_3>

Disables protocol support for SSLv3, TLSv1.0, TLSv1.1, TLSv1.2 or TLSv1.3 by
setting the corresponding options B<SSL_OP_NO_SSLv3>, B<SSL_OP_NO_TLSv1>,
B<SSL_OP_NO_TLSv1_1>, B<SSL_OP_NO_TLSv1_2> and B<SSL_OP_NO_TLSv1_3>
respectively. These options are deprecated, use B<-min_protocol> and
B<-max_protocol> instead.

=item B<-anti_replay>, B<-no_anti_replay>

Switches replay protection, on or off respectively. With replay protection on,
OpenSSL will automatically detect if a session ticket has been used more than
once, TLSv1.3 has been negotiated, and early data is enabled on the server. A
full handshake is forced if a session ticket is used a second or subsequent
time. Anti-Replay is on by default unless overridden by a configuration file and
is only used by servers. Anti-replay measures are required for compliance with
the TLSv1.3 specification. Some applications may be able to mitigate the replay
risks in other ways and in such cases the built-in OpenSSL functionality is not
required. Switching off anti-replay is equivalent to B<SSL_OP_NO_ANTI_REPLAY>.

=back

=head1 SUPPORTED CONFIGURATION FILE COMMANDS

Currently supported B<option> names for configuration files (i.e., when the
flag B<SSL_CONF_FLAG_FILE> is set) are listed below. All configuration file
B<option> names are case insensitive so B<signaturealgorithms> is recognised
as well as B<SignatureAlgorithms>. Unless otherwise stated the B<value> names
are also case insensitive.

Note: the command prefix (if set) alters the recognised B<option> values.

=over 4

=item B<CipherString>

Sets the ciphersuite list for TLSv1.2 and below to B<value>. This list will be
combined with any configured TLSv1.3 ciphersuites. Note: syntax
checking of B<value> is currently not performed unless an B<SSL> or B<SSL_CTX>
structure is associated with B<ctx>.

=item B<Ciphersuites>

Sets the available ciphersuites for TLSv1.3 to B<value>. This is a
colon-separated list of TLSv1.3 ciphersuite names in order of preference. This
list will be combined any configured TLSv1.2 and below ciphersuites.
See L<openssl-ciphers(1)> for more information.

=item B<Certificate>

Attempts to use the file B<value> as the certificate for the appropriate
context. It currently uses SSL_CTX_use_certificate_chain_file() if an B<SSL_CTX>
structure is set or SSL_use_certificate_file() with filetype PEM if an B<SSL>
structure is set. This option is only supported if certificate operations
are permitted.

=item B<PrivateKey>

Attempts to use the file B<value> as the private key for the appropriate
context. This option is only supported if certificate operations
are permitted. Note: if no B<PrivateKey> option is set then a private key is
not loaded unless the B<SSL_CONF_FLAG_REQUIRE_PRIVATE> is set.

=item B<ChainCAFile>, B<ChainCAPath>, B<VerifyCAFile>, B<VerifyCAPath>

These options indicate a file or directory used for building certificate
chains or verifying certificate chains. These options are only supported
if certificate operations are permitted.

=item B<RequestCAFile>

This option indicates a file containing a set of certificates in PEM form.
The subject names of the certificates are sent to the peer in the
B<certificate_authorities> extension for TLS 1.3 (in ClientHello or
CertificateRequest) or in a certificate request for previous versions or
TLS.

=item B<ServerInfoFile>

Attempts to use the file B<value> in the "serverinfo" extension using the
function SSL_CTX_use_serverinfo_file.

=item B<DHParameters>

Attempts to use the file B<value> as the set of temporary DH parameters for
the appropriate context. This option is only supported if certificate
operations are permitted.

=item B<RecordPadding>

Attempts to pad TLSv1.3 records so that they are a multiple of B<value> in
length on send. A B<value> of 0 or 1 turns off padding. Otherwise, the
B<value> must be >1 or <=16384.

=item B<SignatureAlgorithms>

This sets the supported signature algorithms for TLSv1.2 and TLSv1.3.
For clients this
value is used directly for the supported signature algorithms extension. For
servers it is used to determine which signature algorithms to support.

The B<value> argument should be a colon separated list of signature algorithms
in order of decreasing preference of the form B<algorithm+hash> or
B<signature_scheme>. B<algorithm>
is one of B<RSA>, B<DSA> or B<ECDSA> and B<hash> is a supported algorithm
OID short name such as B<SHA1>, B<SHA224>, B<SHA256>, B<SHA384> of B<SHA512>.
Note: algorithm and hash names are case sensitive.
B<signature_scheme> is one of the signature schemes defined in TLSv1.3,
specified using the IETF name, e.g., B<ecdsa_secp256r1_sha256>, B<ed25519>,
or B<rsa_pss_pss_sha256>.

If this option is not set then all signature algorithms supported by the
OpenSSL library are permissible.

Note: algorithms which specify a PKCS#1 v1.5 signature scheme (either by
using B<RSA> as the B<algorithm> or by using one of the B<rsa_pkcs1_*>
identifiers) are ignored in TLSv1.3 and will not be negotiated.

=item B<ClientSignatureAlgorithms>

This sets the supported signature algorithms associated with client
authentication for TLSv1.2 and TLSv1.3.
For servers the value is used in the
B<signature_algorithms> field of a B<CertificateRequest> message.
For clients it is
used to determine which signature algorithm to use with the client certificate.
If a server does not request a certificate this option has no effect.

The syntax of B<value> is identical to B<SignatureAlgorithms>. If not set then
the value set for B<SignatureAlgorithms> will be used instead.

=item B<Groups>

This sets the supported groups. For clients, the groups are
sent using the supported groups extension. For servers, it is used
to determine which group to use. This setting affects groups used for
signatures (in TLSv1.2 and earlier) and key exchange. The first group listed
will also be used for the B<key_share> sent by a client in a TLSv1.3
B<ClientHello>.

The B<value> argument is a colon separated list of groups. The group can be
either the B<NIST> name (e.g. B<P-256>), some other commonly used name where
applicable (e.g. B<X25519>, B<ffdhe2048>) or an OpenSSL OID name
(e.g B<prime256v1>). Group names are case sensitive. The list should be in
order of preference with the most preferred group first.

Currently supported groups for B<TLSv1.3> are B<P-256>, B<P-384>, B<P-521>,
B<X25519>, B<X448>, B<ffdhe2048>, B<ffdhe3072>, B<ffdhe4096>, B<ffdhe6144>,
B<ffdhe8192>.

=item B<Curves>

This is a synonym for the "Groups" command.

=item B<MinProtocol>

This sets the minimum supported SSL, TLS or DTLS version.

Currently supported protocol values are B<SSLv3>, B<TLSv1>, B<TLSv1.1>,
B<TLSv1.2>, B<TLSv1.3>, B<DTLSv1> and B<DTLSv1.2>.
The value B<None> will disable the limit.

=item B<MaxProtocol>

This sets the maximum supported SSL, TLS or DTLS version.

Currently supported protocol values are B<SSLv3>, B<TLSv1>, B<TLSv1.1>,
B<TLSv1.2>, B<TLSv1.3>, B<DTLSv1> and B<DTLSv1.2>.
The value B<None> will disable the limit.

=item B<Protocol>

This can be used to enable or disable certain versions of the SSL,
TLS or DTLS protocol.

The B<value> argument is a comma separated list of supported protocols
to enable or disable.
If a protocol is preceded by B<-> that version is disabled.

All protocol versions are enabled by default.
You need to disable at least one protocol version for this setting have any
effect.
Only enabling some protocol versions does not disable the other protocol
versions.

Currently supported protocol values are B<SSLv3>, B<TLSv1>, B<TLSv1.1>,
B<TLSv1.2>, B<TLSv1.3>, B<DTLSv1> and B<DTLSv1.2>.
The special value B<ALL> refers to all supported versions.

This can't enable protocols that are disabled using B<MinProtocol>
or B<MaxProtocol>, but can disable protocols that are still allowed
by them.

The B<Protocol> command is fragile and deprecated; do not use it.
Use B<MinProtocol> and B<MaxProtocol> instead.
If you do use B<Protocol>, make sure that the resulting range of enabled
protocols has no "holes", e.g. if TLS 1.0 and TLS 1.2 are both enabled, make
sure to also leave TLS 1.1 enabled.

=item B<Options>

The B<value> argument is a comma separated list of various flags to set.
If a flag string is preceded B<-> it is disabled.
See the L<SSL_CTX_set_options(3)> function for more details of
individual options.

Each option is listed below. Where an operation is enabled by default
the B<-flag> syntax is needed to disable it.

B<SessionTicket>: session ticket support, enabled by default. Inverse of
B<SSL_OP_NO_TICKET>: that is B<-SessionTicket> is the same as setting
B<SSL_OP_NO_TICKET>.

B<Compression>: SSL/TLS compression support, enabled by default. Inverse
of B<SSL_OP_NO_COMPRESSION>.

B<EmptyFragments>: use empty fragments as a countermeasure against a
SSL 3.0/TLS 1.0 protocol vulnerability affecting CBC ciphers. It
is set by default. Inverse of B<SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS>.

B<Bugs>: enable various bug workarounds. Same as B<SSL_OP_ALL>.

B<DHSingle>: enable single use DH keys, set by default. Inverse of
B<SSL_OP_DH_SINGLE>. Only used by servers.

B<ECDHSingle>: enable single use ECDH keys, set by default. Inverse of
B<SSL_OP_ECDH_SINGLE>. Only used by servers.

B<ServerPreference>: use server and not client preference order when
determining which cipher suite, signature algorithm or elliptic curve
to use for an incoming connection.  Equivalent to
B<SSL_OP_CIPHER_SERVER_PREFERENCE>. Only used by servers.

B<PrioritizeChaCha>: prioritizes ChaCha ciphers when the client has a
ChaCha20 cipher at the top of its preference list. This usually indicates
a mobile client is in use. Equivalent to B<SSL_OP_PRIORITIZE_CHACHA>.
Only used by servers.

B<NoResumptionOnRenegotiation>: set
B<SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION> flag. Only used by servers.

B<NoRenegotiation>: disables all attempts at renegotiation in TLSv1.2 and
earlier, same as setting B<SSL_OP_NO_RENEGOTIATION>.

B<UnsafeLegacyRenegotiation>: permits the use of unsafe legacy renegotiation.
Equivalent to B<SSL_OP_ALLOW_UNSAFE_LEGACY_RENEGOTIATION>.

B<UnsafeLegacyServerConnect>: permits the use of unsafe legacy renegotiation
for OpenSSL clients only. Equivalent to B<SSL_OP_LEGACY_SERVER_CONNECT>.
Set by default.

B<EncryptThenMac>: use encrypt-then-mac extension, enabled by
default. Inverse of B<SSL_OP_NO_ENCRYPT_THEN_MAC>: that is,
B<-EncryptThenMac> is the same as setting B<SSL_OP_NO_ENCRYPT_THEN_MAC>.

B<AllowNoDHEKEX>: In TLSv1.3 allow a non-(ec)dhe based key exchange mode on
resumption. This means that there will be no forward secrecy for the resumed
session. Equivalent to B<SSL_OP_ALLOW_NO_DHE_KEX>.

B<MiddleboxCompat>: If set then dummy Change Cipher Spec (CCS) messages are sent
in TLSv1.3. This has the effect of making TLSv1.3 look more like TLSv1.2 so that
middleboxes that do not understand TLSv1.3 will not drop the connection. This
option is set by default. A future version of OpenSSL may not set this by
default. Equivalent to B<SSL_OP_ENABLE_MIDDLEBOX_COMPAT>.

B<AntiReplay>: If set then OpenSSL will automatically detect if a session ticket
has been used more than once, TLSv1.3 has been negotiated, and early data is
enabled on the server. A full handshake is forced if a session ticket is used a
second or subsequent time. This option is set by default and is only used by
servers. Anti-replay measures are required to comply with the TLSv1.3
specification. Some applications may be able to mitigate the replay risks in
other ways and in such cases the built-in OpenSSL functionality is not required.
Disabling anti-replay is equivalent to setting B<SSL_OP_NO_ANTI_REPLAY>.

B<ExtendedMasterSecret>: use extended master secret extension, enabled by
default. Inverse of B<SSL_OP_NO_EXTENDED_MASTER_SECRET>: that is,
B<-ExtendedMasterSecret> is the same as setting B<SSL_OP_NO_EXTENDED_MASTER_SECRET>.

=item B<VerifyMode>

The B<value> argument is a comma separated list of flags to set.

B<Peer> enables peer verification: for clients only.

B<Request> requests but does not require a certificate from the client.
Servers only.

B<Require> requests and requires a certificate from the client: an error
occurs if the client does not present a certificate. Servers only.

B<Once> requests a certificate from a client only on the initial connection:
not when renegotiating. Servers only.

B<RequestPostHandshake> configures the connection to support requests but does
not require a certificate from the client post-handshake. A certificate will
not be requested during the initial handshake. The server application must
provide a mechanism to request a certificate post-handshake. Servers only.
TLSv1.3 only.

B<RequiresPostHandshake> configures the connection to support requests and
requires a certificate from the client post-handshake: an error occurs if the
client does not present a certificate. A certificate will not be requested
during the initial handshake. The server application must provide a mechanism
to request a certificate post-handshake. Servers only. TLSv1.3 only.

=item B<ClientCAFile>, B<ClientCAPath>

A file or directory of certificates in PEM format whose names are used as the
set of acceptable names for client CAs. Servers only. This option is only
supported if certificate operations are permitted.

=back

=head1 SUPPORTED COMMAND TYPES

The function SSL_CONF_cmd_value_type() currently returns one of the following
types:

=over 4

=item B<SSL_CONF_TYPE_UNKNOWN>

The B<option> string is unrecognised, this return value can be use to flag
syntax errors.

=item B<SSL_CONF_TYPE_STRING>

The value is a string without any specific structure.

=item B<SSL_CONF_TYPE_FILE>

The value is a filename.

=item B<SSL_CONF_TYPE_DIR>

The value is a directory name.

=item B<SSL_CONF_TYPE_NONE>

The value string is not used e.g. a command line option which doesn't take an
argument.

=back

=head1 NOTES

The order of operations is significant. This can be used to set either defaults
or values which cannot be overridden. For example if an application calls:

 SSL_CONF_cmd(ctx, "Protocol", "-SSLv3");
 SSL_CONF_cmd(ctx, userparam, uservalue);

it will disable SSLv3 support by default but the user can override it. If
however the call sequence is:

 SSL_CONF_cmd(ctx, userparam, uservalue);
 SSL_CONF_cmd(ctx, "Protocol", "-SSLv3");

SSLv3 is B<always> disabled and attempt to override this by the user are
ignored.

By checking the return code of SSL_CONF_cmd() it is possible to query if a
given B<option> is recognised, this is useful if SSL_CONF_cmd() values are
mixed with additional application specific operations.

For example an application might call SSL_CONF_cmd() and if it returns
-2 (unrecognised command) continue with processing of application specific
commands.

Applications can also use SSL_CONF_cmd() to process command lines though the
utility function SSL_CONF_cmd_argv() is normally used instead. One way
to do this is to set the prefix to an appropriate value using
SSL_CONF_CTX_set1_prefix(), pass the current argument to B<option> and the
following argument to B<value> (which may be NULL).

In this case if the return value is positive then it is used to skip that
number of arguments as they have been processed by SSL_CONF_cmd(). If -2 is
returned then B<option> is not recognised and application specific arguments
can be checked instead. If -3 is returned a required argument is missing
and an error is indicated. If 0 is returned some other error occurred and
this can be reported back to the user.

The function SSL_CONF_cmd_value_type() can be used by applications to
check for the existence of a command or to perform additional syntax
checking or translation of the command value. For example if the return
value is B<SSL_CONF_TYPE_FILE> an application could translate a relative
pathname to an absolute pathname.

=head1 RETURN VALUES

SSL_CONF_cmd() returns 1 if the value of B<option> is recognised and B<value> is
B<NOT> used and 2 if both B<option> and B<value> are used. In other words it
returns the number of arguments processed. This is useful when processing
command lines.

A return value of -2 means B<option> is not recognised.

A return value of -3 means B<option> is recognised and the command requires a
value but B<value> is NULL.

A return code of 0 indicates that both B<option> and B<value> are valid but an
error occurred attempting to perform the operation: for example due to an
error in the syntax of B<value> in this case the error queue may provide
additional information.

=head1 EXAMPLES

Set supported signature algorithms:

 SSL_CONF_cmd(ctx, "SignatureAlgorithms", "ECDSA+SHA256:RSA+SHA256:DSA+SHA256");

There are various ways to select the supported protocols.

This set the minimum protocol version to TLSv1, and so disables SSLv3.
This is the recommended way to disable protocols.

 SSL_CONF_cmd(ctx, "MinProtocol", "TLSv1");

The following also disables SSLv3:

 SSL_CONF_cmd(ctx, "Protocol", "-SSLv3");

The following will first enable all protocols, and then disable
SSLv3.
If no protocol versions were disabled before this has the same effect as
"-SSLv3", but if some versions were disables this will re-enable them before
disabling SSLv3.

 SSL_CONF_cmd(ctx, "Protocol", "ALL,-SSLv3");

Only enable TLSv1.2:

 SSL_CONF_cmd(ctx, "MinProtocol", "TLSv1.2");
 SSL_CONF_cmd(ctx, "MaxProtocol", "TLSv1.2");

This also only enables TLSv1.2:

 SSL_CONF_cmd(ctx, "Protocol", "-ALL,TLSv1.2");

Disable TLS session tickets:

 SSL_CONF_cmd(ctx, "Options", "-SessionTicket");

Enable compression:

 SSL_CONF_cmd(ctx, "Options", "Compression");

Set supported curves to P-256, P-384:

 SSL_CONF_cmd(ctx, "Curves", "P-256:P-384");

=head1 SEE ALSO

L<ssl(7)>,
L<SSL_CONF_CTX_new(3)>,
L<SSL_CONF_CTX_set_flags(3)>,
L<SSL_CONF_CTX_set1_prefix(3)>,
L<SSL_CONF_CTX_set_ssl_ctx(3)>,
L<SSL_CONF_cmd_argv(3)>,
L<SSL_CTX_set_options(3)>

=head1 HISTORY

The SSL_CONF_cmd() function was added in OpenSSL 1.0.2.

The B<SSL_OP_NO_SSL2> option doesn't have effect since 1.1.0, but the macro
is retained for backwards compatibility.

The B<SSL_CONF_TYPE_NONE> was added in OpenSSL 1.1.0. In earlier versions of
OpenSSL passing a command which didn't take an argument would return
B<SSL_CONF_TYPE_UNKNOWN>.

B<MinProtocol> and B<MaxProtocol> where added in OpenSSL 1.1.0.

B<AllowNoDHEKEX> and B<PrioritizeChaCha> were added in OpenSSL 1.1.1.

=head1 COPYRIGHT

Copyright 2012-2018 The OpenSSL Project Authors. All Rights Reserved.

Licensed under the Apache License 2.0 (the "License").  You may not use
this file except in compliance with the License.  You can obtain a copy
in the file LICENSE in the source distribution or at
L<https://www.openssl.org/source/license.html>.

=cut