diff options
Diffstat (limited to 'Documentation/devicetree/bindings/iio/dac')
3 files changed, 391 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ltc2664.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ltc2664.yaml new file mode 100644 index 000000000000..33490853497b --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/adi,ltc2664.yaml @@ -0,0 +1,181 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/dac/adi,ltc2664.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices LTC2664 DAC + +maintainers: + - Michael Hennerich <michael.hennerich@analog.com> + - Kim Seer Paller <kimseer.paller@analog.com> + +description: | + Analog Devices LTC2664 4 channel, 12-/16-Bit, +-10V DAC + https://www.analog.com/media/en/technical-documentation/data-sheets/2664fa.pdf + +properties: + compatible: + enum: + - adi,ltc2664 + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 50000000 + + vcc-supply: + description: Analog Supply Voltage Input. + + v-pos-supply: + description: Positive Supply Voltage Input. + + v-neg-supply: + description: Negative Supply Voltage Input. + + iovcc-supply: + description: Digital Input/Output Supply Voltage. + + ref-supply: + description: + Reference Input/Output. The voltage at the REF pin sets the full-scale + range of all channels. If not provided the internal reference is used and + also provided on the VREF pin. + + reset-gpios: + description: + Active-low Asynchronous Clear Input. A logic low at this level-triggered + input clears the part to the reset code and range determined by the + hardwired option chosen using the MSPAN pins. The control registers are + cleared to zero. + maxItems: 1 + + adi,manual-span-operation-config: + description: + This property must mimic the MSPAN pin configurations. By tying the MSPAN + pins (MSP2, MSP1 and MSP0) to GND and/or VCC, any output range can be + hardware-configured with different mid-scale or zero-scale reset options. + The hardware configuration is latched during power on reset for proper + operation. + 0 - MPS2=GND, MPS1=GND, MSP0=GND (+-10V, reset to 0V) + 1 - MPS2=GND, MPS1=GND, MSP0=VCC (+-5V, reset to 0V) + 2 - MPS2=GND, MPS1=VCC, MSP0=GND (+-2.5V, reset to 0V) + 3 - MPS2=GND, MPS1=VCC, MSP0=VCC (0V to 10, reset to 0V) + 4 - MPS2=VCC, MPS1=GND, MSP0=GND (0V to 10V, reset to 5V) + 5 - MPS2=VCC, MPS1=GND, MSP0=VCC (0V to 5V, reset to 0V) + 6 - MPS2=VCC, MPS1=VCC, MSP0=GND (0V to 5V, reset to 2.5V) + 7 - MPS2=VCC, MPS1=VCC, MSP0=VCC (0V to 5V, reset to 0V, enables SoftSpan) + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3, 4, 5, 6, 7] + default: 7 + + io-channels: + description: + ADC channel to monitor voltages and temperature at the MUXOUT pin. + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +patternProperties: + "^channel@[0-3]$": + $ref: dac.yaml + type: object + additionalProperties: false + + properties: + reg: + description: The channel number representing the DAC output channel. + maximum: 3 + + adi,toggle-mode: + description: + Set the channel as a toggle enabled channel. Toggle operation enables + fast switching of a DAC output between two different DAC codes without + any SPI transaction. + type: boolean + + output-range-microvolt: + description: + This property is only allowed when SoftSpan is enabled. If not present, + [0, 5000000] is the default output range. + oneOf: + - items: + - const: 0 + - enum: [5000000, 10000000] + - items: + - const: -5000000 + - const: 5000000 + - items: + - const: -10000000 + - const: 10000000 + - items: + - const: -2500000 + - const: 2500000 + + required: + - reg + + allOf: + - if: + not: + properties: + adi,manual-span-operation-config: + const: 7 + then: + patternProperties: + "^channel@[0-3]$": + properties: + output-range-microvolt: false + +required: + - compatible + - reg + - spi-max-frequency + - vcc-supply + - iovcc-supply + - v-pos-supply + - v-neg-supply + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +additionalProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + dac@0 { + compatible = "adi,ltc2664"; + reg = <0>; + spi-max-frequency = <10000000>; + + vcc-supply = <&vcc>; + iovcc-supply = <&vcc>; + ref-supply = <&vref>; + v-pos-supply = <&vpos>; + v-neg-supply = <&vneg>; + + io-channels = <&adc 0>; + + #address-cells = <1>; + #size-cells = <0>; + channel@0 { + reg = <0>; + adi,toggle-mode; + output-range-microvolt = <(-10000000) 10000000>; + }; + + channel@1 { + reg = <1>; + output-range-microvolt= <0 10000000>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ltc2672.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ltc2672.yaml new file mode 100644 index 000000000000..c8c434c10643 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/adi,ltc2672.yaml @@ -0,0 +1,160 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/dac/adi,ltc2672.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices LTC2672 DAC + +maintainers: + - Michael Hennerich <michael.hennerich@analog.com> + - Kim Seer Paller <kimseer.paller@analog.com> + +description: | + Analog Devices LTC2672 5 channel, 12-/16-Bit, 300mA DAC + https://www.analog.com/media/en/technical-documentation/data-sheets/ltc2672.pdf + +properties: + compatible: + enum: + - adi,ltc2672 + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 50000000 + + vcc-supply: + description: Analog Supply Voltage Input. + + v-neg-supply: + description: Negative Supply Voltage Input. + + vdd0-supply: + description: Positive Supply Voltage Input for DAC OUT0. + + vdd1-supply: + description: Positive Supply Voltage Input for DAC OUT1. + + vdd2-supply: + description: Positive Supply Voltage Input for DAC OUT2. + + vdd3-supply: + description: Positive Supply Voltage Input for DAC OUT3. + + vdd4-supply: + description: Positive Supply Voltage Input for DAC OUT4. + + iovcc-supply: + description: Digital Input/Output Supply Voltage. + + ref-supply: + description: + Reference Input/Output. The voltage at the REF pin sets the full-scale + range of all channels. If not provided the internal reference is used and + also provided on the VREF pin. + + reset-gpios: + description: + Active Low Asynchronous Clear Input. A logic low at this level triggered + input clears the device to the default reset code and output range, which + is zero-scale with the outputs off. The control registers are cleared to + zero. + maxItems: 1 + + adi,rfsadj-ohms: + description: + If FSADJ is tied to VCC, an internal RFSADJ (20 kΩ) is selected, which + results in nominal output ranges. When an external resistor of 19 kΩ to + 41 kΩ can be used instead by connecting the resistor between FSADJ and GND + it controls the scaling of the ranges, and the internal resistor is + automatically disconnected. + minimum: 19000 + maximum: 41000 + default: 20000 + + io-channels: + description: + ADC channel to monitor voltages and currents at the MUX pin. + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +patternProperties: + "^channel@[0-4]$": + $ref: dac.yaml + type: object + additionalProperties: false + + properties: + reg: + description: The channel number representing the DAC output channel. + maximum: 4 + + adi,toggle-mode: + description: + Set the channel as a toggle enabled channel. Toggle operation enables + fast switching of a DAC output between two different DAC codes without + any SPI transaction. + type: boolean + + output-range-microamp: + items: + - const: 0 + - enum: [3125000, 6250000, 12500000, 25000000, 50000000, 100000000, + 200000000, 300000000] + + required: + - reg + - output-range-microamp + +required: + - compatible + - reg + - spi-max-frequency + - vcc-supply + - iovcc-supply + - v-neg-supply + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +additionalProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + dac@0 { + compatible = "adi,ltc2672"; + reg = <0>; + spi-max-frequency = <10000000>; + + vcc-supply = <&vcc>; + iovcc-supply = <&vcc>; + ref-supply = <&vref>; + v-neg-supply = <&vneg>; + + io-channels = <&adc 0>; + + #address-cells = <1>; + #size-cells = <0>; + channel@0 { + reg = <0>; + adi,toggle-mode; + output-range-microamp = <0 3125000>; + }; + + channel@1 { + reg = <1>; + output-range-microamp = <0 6250000>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/dac/dac.yaml b/Documentation/devicetree/bindings/iio/dac/dac.yaml new file mode 100644 index 000000000000..daa40724e1cf --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/dac.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/dac/dac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: IIO Common Properties for DAC Channels + +maintainers: + - Jonathan Cameron <jic23@kernel.org> + +description: + A few properties are defined in a common way for DAC channels. + +properties: + $nodename: + pattern: "^channel(@[0-9a-f]+)?$" + description: + A channel index should match reg. + + reg: + maxItems: 1 + + label: + description: Unique name to identify which channel this is. + + output-range-microamp: + maxItems: 2 + minItems: 2 + description: + Specify the channel output full scale range in microamperes. + + output-range-microvolt: + maxItems: 2 + minItems: 2 + description: + Specify the channel output full scale range in microvolts. + +anyOf: + - oneOf: + - required: + - reg + - output-range-microamp + - required: + - reg + - output-range-microvolt + - required: + - reg + +additionalProperties: true |